Database Info

Hard SPL with linux

Hi
First time post, please be gentle.
I am trying to flash a new rom onto my tytn II but I do not have windows or activesync on my PC.
I have tried searching but have not found the answer I need
Can I flash Hard Spl with linux only
Please help
Thanks in advance

You're probably best installing VM Ware onto Linux and then getting a copy of Windows to run through VM Ware. I think the USB should still work through this.
Not been tested but this is the best I can offer.

thanks for your reply
I have tried this and still no joy, someone must have linux installed and upgraded there rom on thr tytnII, I really dont want to have to install windows just for activesync

mac_d4di said:
thanks for your reply
I have tried this and still no joy, someone must have linux installed and upgraded there rom on thr tytnII, I really dont want to have to install windows just for activesync
Click to expand...
Click to collapse
There is a SD method, but don't know if can work to put HardSPL, because HardSPL needs to execute SSPL into the PDA before flashing the new SPL.
I have tested WinXP box inside Windows Vista to flash using VMWare, and works fine, so XP box inside Linux must work too...
Cheers.

Thanks for your super quick reply
Is there a way to run the rom upgrade without Hardspl installed at all.
or perhaps run the Hardspl from sd card and then upgrade it that way.
Sorry to ask so many questions

mac_d4di said:
I am trying to flash a new rom onto my tytn II
Click to expand...
Click to collapse
I don't know what is hardspl, but have you checked hermflasher ?
Maybe it will work with some minor changes:
http://forum.xda-developers.com/showthread.php?t=296436

mac_d4di said:
Thanks for your super quick reply
Is there a way to run the rom upgrade without Hardspl installed at all.
or perhaps run the Hardspl from sd card and then upgrade it that way.
Sorry to ask so many questions
Click to expand...
Click to collapse
Yes, you can use the SD method with the ROM matching your CID (inside your SPL). This allows you to put a ROM from the manufacturer/oem of your Kaiser.
You sould not install any ROM before having HardSPL...
Search the SD method on the Wiki. With the Sd method you only copy the NBH file into SD and go to bootloader...
Cheers.

Thanks for your comments, very helpfull indeed I will look into both of the methods described and report back on my progress

I've used VMWare without a problem. Make sure you set up your fstab file to allow quickswapping USB in VMWare or else you have to constantly suspend and start windows just to get it to recognize the USB after it disconnects.

Hi
Does anyone have a copy of SSPL-KAIS.exe that they got attach or PM me. thanks.
After digging a little deeper this may work although it has been removed from the main site
**found it dont worry

HardSPL not installing, alternatives?

Hello,
Okay, so I got my Kaiser 2 days ago, though it has a swedish HTC ROM, and I want the English HTC ROM.
I have the rom on the SD card, and when going to the bootscreen, it loads and checks the new rom, and than says "Not Allow".
I checked that out, and that means the CID is still on. But I can't get HardSPL on the device, as soon as it goes in the tri-color screen, I can't connect to the device anymore with usb, meaning I can't install HardSPL.
Anybody got a different way?

Try removing the Unknown device from device manager and re-plug your Kaiser while in bootscreen, it should install the driver again (you can find the drivers in Program Files/Microsoft ActiveSync/Drivers directory if not automatic)
Then it should work.

Can't find any Drivers directory in the activesync dir.
PS. Its windows Vista with mobile center

I would steer clear of trying to flash anything via vista....
Although it *may* work, most of the software tools were not designed with vista in mind. Don't want to brick you shiny new phone now do we?!
Turf out an old laptop or something with XP on if you want to flash.

RUU works fine in vista as does hard spl. I didn't have to do anything special other than run hardspl as an administrator by right clicking and selecting run as admin.

Nope still not working.
There's no other way to do it? Like from sd card or something like a normal rom update is possible

Well, found the Vista drivers. Not working, needed 64 bit.
Found 64 bit drivers, not working, unsigned.
booted the computer with disabled the security, WORKED! So now its flashed.

Help with HardSPL flash!

Hey guys I have read all the articles on how to flash my fuze and I feel pretty confident in how I am doing it but I am having no luck on getting my fuze to flash the HardSPL. I am trying to use OliNex flash instructions. What is happening is that I have hooked my phone to a XP machine running Active Sync 4.5. I also made sure I had the .NET Framework 3.5 loaded. I run the RaphaelHardSPL-unsigned_190_1_3.exe. I follow the on screen instructions and then all of a sudden my phone goes black and you can here through Windows that the USB connection disconnects. The status bar on the computer stays at 0% and then after a few minutes it gives me a Error 262 Update Error and then starts the recovery process. My phone still works, but I can't seem to get it to flash. Any ideas?
Thanks
-Smicale

This is an error with the Custom RUU Wrapper.
Extract the .nbh file and load to the root of your storage card, search on "flashing spl from SD Card" for specifics.
I believe you rename it raphimg.nbh or something like that but I don't remember.
Enter bootloader and it will load from your card.

Hmm, I didnt know that HardSPL thingy can be execute inside microSD. I thought only ROM. Anyway, what OS you're using? I still have no luck with Vista or Windows 7 as they're keep on disconnecting USB. So until any fix on this, I keep my XP around

u2pop said:
Hmm, I didnt know that HardSPL thingy can be execute inside microSD. I thought only ROM. Anyway, what OS you're using? I still have no luck with Vista or Windows 7 as they're keep on disconnecting USB. So until any fix on this, I keep my XP around
Click to expand...
Click to collapse
I have tried both XP and Windows 7 with no luck.

Bruce Inman said:
This is an error with the Custom RUU Wrapper.
Extract the .nbh file and load to the root of your storage card, search on "flashing spl from SD Card" for specifics.
I believe you rename it raphimg.nbh or something like that but I don't remember.
Enter bootloader and it will load from your card.
Click to expand...
Click to collapse
Bruce,
can you verify that this is possible to flash a SPL from SD card? If so I will try it right away.
Thanks

You can flash any .nbh file from bootloader.
Here is a brief instruction.
Also, for your PC issue, make sure you have netcf 3.5 installed.

RhodiumW Hard-SPL Release

preface for the people not reading ... some quick answers:
- our page on this Hard-SPL is always here: http://rhodiumw.htc-unlocks.com/hard-spl.php
- license: you will just have to run the program on the PC with phone connected, normally you will not notice anything about the licensing, it is totally free for personal use!
- if you need help with license issues (when it says you already unlocked a device), you can send your message at: http://support.htc-unlocks.com
[SIZE=+2]Hard-SPL Release Time!!!! [/SIZE]
[SIZE=+2]NOTE: This is NOT a SIM unlocker - it also doesn't unlock Security for other radios. if you need that, GO HERE[/SIZE]
[SIZE=+2]NOW UPDATED -> if you already installed HardSPL, you will not need this update. but if you are going to HardSPL only now, it applies to you (package will lead you to update link anyway).[/SIZE]
Preface: okay, it was released only this weekend! but trust me the wait was worth it as it works really great and smooth now!
Licensing information: it's like with previous Hard-SPL unlockers - every user gets one free use of the Hard-SPL, further use is subject to paying a small amount per device.
however, if you are a private user, you can have other uses free on request if needed, such as using it on a replacement device.
the license is valid forever and all this works as transparently as possible, so for normal users nothing is noticable; while businesses who need to unlock more devices than that, can use the link inside the program to send payment or contact cmonex or Olipro if you want to discuss bulk unlocking.
contact info is: via support link at our site
IMPORTANT: please do not use this contact info for asking help for problems unrelated to licensing unless you are a paying customer. other messages will not be answered - instead you can use this thread to post about your issues!!!
Preparations:
0) this package is for Rhodium CDMA-GSM worldphone version only (CDMA Touch Pro 2, not the original Touch Pro) devices. only RHOD400, RHOD500 modelids are accepted. this Hard-SPL supports WM6.5.
1) if you have Vista / Windows 7, WMDC update to 6.1 (or whatever is latest) is recommended.
Instructions: read this if unsure how to install Hard-SPL... if you are an experienced user then you'll probably not need to read most of this but if you are unsure or run into an issue, then you should read the following!
Steps:
1) download newest RhodiumW Hard-SPL package and extract this to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!!! the device needs to be connected to Activesync or WMDC via USB cable. and it must not be in Flight/Airplane mode (i.e. the phone part should be on).
3) internet access is required as the program checks online for updates and for the license.
4) run Rhodium-HardSPL.exe on your PC, make sure it's launched from a local drive (not through network drive, etc.). running it on XP requires Admin logon, and Vista/Windows 7 will automatically prompt to allow it to run in Admin mode, so allow it please.
important: if you get an antivirus warning, please ignore it, it contains no harmful code (just used a packer to compress it). if you encounter DEP errors, then add it to the exception list in DEP settings.
5) follow steps as prompted in the Hard-SPL program. if this is the first run of Hard-SPL on a device after hard reset, you must select Automatic flash mode (the first button in Welcome screen).
notes: you should usually go for Automatic flash mode; the Manual flash option is only to be used as noted below - any other errors triggered while running in Autoflash mode will have to be fixed as instructed in the error message.
6) it will ask you to wait while it prepares for the flashing, press OK.
7) now it should go through without any error messages, if one does pop up, then please follow the instructions included in the error text. if no specific instruction is shown, then ask for help in the forums, but this should not ever occur (as this means a really fatal error occurred).
at this point the device did hopefully went to a black screen. this is the SSPL version, which is temporary. then RUU (Rom Update Utility) will instantly launch.
9) some notes: when RUU says it will perform a hard reset and cause data loss, do not worry, it is not going to do this. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
10) SPL flashes, device automatically reboots, job done.
11) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.00.OliNex, which is the current Hard-SPL version.
More Notes:
NOTE 1: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, you need the following key combination: Power Button + Volume Down + Reset Button. means, do a soft reset while holding the "volume down" key and power key on the side of the device. hold these keys until you see a special tricolour screen which is the bootloader mode.
NOTE 2: this is unsigned Hard-SPL. no limitations on flashing ROMs (except of course some Radio roms). also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted on our site. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps in the next post about how to reflash stock SPL.
NOTE 3: anyone having USB connection problems with the device after it already entered SSPL mode, please copy SSPL-Manual-Rhodium.exe from SSPL-Manual-RhodiumW.zip (available on our site), copy it to the device and run it. then once the screen has gone black, run the Hard-SPL package on the PC and you must select Manual flash option. *important*: make sure that the USB cable is plugged in and device is synced to Windows Mobile even if doing manual method.
NOTE 4: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! nothing other than SPL's made by Olinex team will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or a customRUU if you need to flash cooked ROMs.
NOTE 5: supported OS versions: both 32-bit and 64-bit XP, Vista, Windows 7RC and later. Windows 2000 was untested, and pre-RC win7 (lower than build 7100) is explicitly not supported. also, the program may be unstable or not work on Virtual systems, so it's recommended to try outside Virtual OS software.
Troubleshooting: and Step by Step on reflashing stock SPL: are in next post below!
Credits:
first, "OliNex" is a team which means: cmonex + Olipro
Olipro -> concept of EXE program that runs on the PC, Hard-SPL concept, server-side license code and maintaining the licenses.
cmonex -> HSPL package on PC, SSPL loader for windows mobile and SSPL binary. Hard-SPL binary. (SSPL loader: partially based on haret and old pof&Olipro jumpspl code),
[SIZE=+3]Donations are always appreciated, the Hard-SPL program will provide you with a link at the end of the process to make it easier. any little helps!!! Thank you![/SIZE]
and now enjoy!

-continued from first post-
Manual SSPL download: (added soon)
Troubleshooting:
firstly:
- read the instructions above.
- read the instructions above.
- read the instructions above.
nothing happens on the device, does not enter black screen mode:
- anyone having problems with the device crashing instead of entering SSPL, make sure you've used Automatic flash mode before to put the device in SSPL (if you hard-reset your device, you have to repeat Automatic flash mode at least once).
- please make sure you watch the device screen if it asks about running files (it probably won't, I made sure of that, but just in case, check, for example it can warn about model incompatibility).
- also you can try unticking advanced usb/network functionality in settings on the device. exact location of this will probably be: start menu / settings / connections / usbtopc applet.
general usb connection error problems:
- if you get connection error in RUU after the device goes to black SSPL screen: make sure device was still synced via USB to the PC at the point of it entering SSPL (the black screen) and do not try replugging please, that will probably just crash SSPL.
- it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the USB connection is established in SSPL, RUU will see device. if not (happens very rarely), wait for RUU to time out (or wait a few minutes). then remove back cover, reset, it will boot OS again, then you can retry unlocking process.
- anyone having problems with the device entering SSPL without functional USB port ("ERROR 260 CONNECTION" RUU error), you can get SSPL-Manual-Rhodium.exe from attachment in this post, copy it to the *device* itself and run it. then once the screen is showing black, run the Hard-SPL package on the PC and select Manual flash option. please do not use Manual flash option for any other purposes
- try a different USB port
- try different USB cable
- do not touch USB cable during the process especially if it is already a bit dodgy
- also do not use USB hub
- you can also try rebooting your PC
- and you can try using another PC.
- another reason for USB connection error: if your PC takes too long to load the drivers (if your device is in bootloader for the first time it needs to do that), then if RUU times out, but device is still in black screen, just leave it there and re-run the Hard-SPL package when driver installation finishes - you must use Manual Flash option in such a case. I recommend to wait for Windows to take its time searching for the USB drivers, then click Next in RUU only when they are installed.
- finally, you can try disabling antivirus or firewall programs on the PC.
ModelID checking: if SSPL loader says it's for a different model or device, please make sure you are using the correct HardSPL package. currently this SSPL accepts only RHOD400, RHOD500 modelids i.e. the CDMA-GSM worldphone version, but if we get notified of another compatible RhodiumW version, we will instantly modify it to allow those models. check modelid by entering SPL tricolour screen manually and note what it says (RHOD400, RHOD500, or something else). note: RHOD1xx, 2xx, 3xx are not going to be compatible at all!
other issues:
- if device reports that Enterbootloader.exe fails to run (says missing component or corrupt signature or similar), try a hard reset.
- if device reboots instead of going to SSPL screen (black), which is very unlikely to happen, then contact us by PM to cmonex. do not PM OliNex user, that is not monitored frequently (and PM's to it are disabled now anyway).
- if none of the above help, read thread for further suggestions, if still nothing, make a post in thread describing all details about the exact situation.
how to reflash Stock/Shipped SPL: - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in.
1. download the Relocker by clicking here, extract the zip and run the EXE on your PC
2. if you wish to replace RUU_Signed.NBH that got extracted, feel free to do so, but not necessary (this Hard-SPL will only allow overwrite with a SPL made by us). the included one is the 0.63.0000 stock SPL. 3. flash
4. verify if it flashed by checking version in tricolour screen, it should say 0.63.0000, not 1.00.OliNex.
About UPDATES:
-new release coming soon, fixes a specific problem for a small group of people-
-more troubleshooting tips soon-

Consider yourself... sticky

Thank you Olinex. Great WORK

thank you! can someone please tell me what this does for my vzw tp2? thank you so much .

buggs1a said:
thank you! can someone please tell me what this does for my vzw tp2? thank you so much .
Click to expand...
Click to collapse
In a nutshell, this basically will allow you to flash custom made roms and other assorted customizations.

Hey, thank you.
Does using this and then not putting a custom rom on it right away do anything bad? Like waiting for a 6.5.1 rom or something. Sorry if this isn't the right place. Forgive me please.
Crashes on vista x64 sp2 home premium. as soon as I click to open the hard spl exe it crashes.

You can wait as long as you want to flash another rom, custom or carrier. So no worries in holding off.

Thanks so much for answering.
Here's something.
Crashes on vista x64 sp2 home premium. as soon as I click to open the hard spl exe it crashes.
I just tried. I don't get it.
My mcafee doesn't have a trust app add feature that i can see so i turned off real time scanning to extract the file and then run it. Then the hard spl crashes when i try to run it. I hit auto flash and immediately it crashes.

What specific error message(s) are you getting?

Nothing specific. It just crashes and the windows app crash pops up. That's all that I can remember. Should I try again and look for something specific?
Also I would like to say that I connected the phone to my pc via usb cable and that's it. On phone opened the disk mode or active sync selection but I didn't touch anything in time then it disappeared. The phone showed up as a hard drive in explorer. I didn't do anything else when trying to run the hard-spl exe. Should I have?
Thanks a million.

You need to make sure you're connected to your computer and sync up with ActiveSync. Once that's all connected properly, then you can run hspl.

but how do i do that? i noticed just now i reconnected phone and active sync was selected on the phone, but nothing comes up on windows vista except the auto run and it says synch with media player or open to view files or do nothing.

Oh, Vista. Right. You'll need to use Windows Mobile Device Center then. Install that, reboot, then sync up with that (it's ActiveSync's replacment for Vista and Windows 7). Then you should be able to run hspl fine.

That you very much Oli, and to all the people who worked so hard on this! I just put it on my Verizon Touch Pro 2 and it went like a snap, but what software from you doesn't A nice donation is coming yer way me matey!

thanks. that did it.
i got to the part where it said make sure the battery has 50% or more. i said cancel and now my phone is off and won't come on. I disconnected usb and tried to turn it on and nothing happens. reconnected phone and tried to do this again and it told me i need to active synch again. but i can't turn on phone right now. I don't know what to do now.

Have you tried taking out the battery of the phone, reinserting it and turning it back on?

trying now except i dont know how to open it. ok my bad. had to remove stylus. it's on now.
Ok sweet. It rebooted the phone. Success I suppose. Now to find a rom.... But then I dunno what to look for. hmm...
lol

buggs1a said:
trying now except i dont know how to open it. ok my bad. had to remove stylus. it's on now.
Ok sweet. It rebooted the phone. Success I suppose. Now to find a rom.... But then I dunno what to look for. hmm...
lol
Click to expand...
Click to collapse
Glad you got it figured out. Have fun finding a good rom that suits you.
edit: since we don't really have much of a CDMA TP2 selection just yet, I'd recommend checking here. He makes a great ROM. Just be sure not to discuss ROMs in this thread.

I posted this at PPCGeeks also, but here is a problem I am having while trying to unlock in Windows 7 x64 using WMDC.
1. Ran the .exe
2. Screen pops up "Preparing to flash, press ok to wait. I press ok.
3. The screen goes black (like it's supposed to), Active Sync DISCONNECTS, and a box pops up: "Welcome to the ROM update utility...". I check the box "I understand the caution..." and click next.
4. The next box pops up "Follow the instructions..." and I check the box "I completed the steps..."
5. A box pops up: "Verifying the information on your PDA phone...please wait..."
6. About 30 seconds go by, and an error box pops up: Error [260]: Connection...
7. The screen remains black and the phone non-functional. I have to soft-reset the device at this point.
When I soft-reset in #7 above, the computer dink-donks like when you disconnect the UBS cable, so there's still some sort of connection the PC is recognizing. I tried a second time after installing the enablerapinew.cab (using auto mode) and got the exact same errors.
Any thoughts?

[Mango] Cant Deploy XAP anymore: Error Code 0x89731812

ive tried a new version of navigon, i quote what happend:
webwalk® said:
aww man, whats with this version...
deploy, start server -> check your internetconnection (3g still enabled but no net, shut it down after)
replug phone, restart server, start navigon.. connecting....
but then my phone connected and disconnected from usb 5 or 6 times quickly and zune couldnt find device anymore..
replug, restart... still connecting screen..
ill try one last time... the usb disconnecting freaks me out...
error deploying... 0x89731812
WTF! now replug phone: ZUNE READ ERROR, CANT READ IMPORTANT PARTS FROM DEVICE!
i hope its mango error.. phone restart seems to have fixxed it...
tried one last time.. cant connect to server, forever " connecting " dont know whats up... maybe pc restart, but chance is too low to try out..
device is tmode mozart UK language
ow shhhh... cant deploy anything anymore... error deploying... 0x89731812
Click to expand...
Click to collapse
i rememberd zune had visual problems when i came out of hibernation mode, so ive restarted PC, same problem...
dont know much more yet, maybe a phone restart fixxes it... trying now.. /edit, didnt fix it, CRY
//more info:
while the sudden disconnecting happend,
windows tried to install unknown drivers, but failed,
maybe thats causing the trouble..
i really hope its mango not hardware issue
btw, still unlocked, can start homebrew & sync zune
freaks me out.. next up:
reinstall zune & mango sdk
if not working, nodo backup
ive also read about a hd2 guy with this error but also couldnt sync with zune,
he also had the unknown drivers installed, but never got a fix,
he couldnt even flash a rom, also not after reinstalling everything...
a little scary story, surfing in dangerous grounds

homebrew Xaps in mango
Microsoft doesn't support ID_CAP_INTEROPSERVICES" in mango, but not all xaps require it, I removed it from the Navigon xap and then re-deployed it and it ran fine all my maps work on mango

A question here, what did you package .xap with?

CP-Geek said:
A question here, what did you package .xap with?
Click to expand...
Click to collapse
Use either WinRAR or 7zip to unzip the XAP. Edit the file, compress to a zip, rename zip to XAP. I have a thread on this already...

drkfngthdragnlrd said:
Use either WinRAR or 7zip to unzip the XAP. Edit the file, compress to a zip, rename zip to XAP. I have a thread on this already...
Click to expand...
Click to collapse
There's no need to decompress the archive in order to be able to edit a certain file. At least if it's text based. I for one open the xap with 7zip, then right click the xml file and choose "edit". I can then edit the file to my needs, save it and when I close 7zip it asks me to write the changes to the archive. Once this is done I can deploy the xap to my device and all is fine.
True, the result is exactly the same, but this way you save some time and reduce the amount of possible mistakes.

dkp1977 said:
There's no need to decompress the archive in order to be able to edit a certain file. At least if it's text based. I for one open the xap with 7zip, then right click the xml file and choose "edit". I can then edit the file to my needs, save it and when I close 7zip it asks me to write the changes to the archive. Once this is done I can deploy the xap to my device and all is fine.
True, the result is exactly the same, but this way you save some time and reduce the amount of possible mistakes.
Click to expand...
Click to collapse
True, never thought about that. Sometimes we just overlook the simple solutions lol...

a little offtopic
however, i successfully deployed other versions of the same app earlier on mango so i dont think it had something to do with ID_CAP_INTEROPSERVICES
it seems mango with tmode spl needs more work.
it get lots of different small bugs..
like i had 5x the same call in multitasking..
aborting calls almost crashed my phone today..
im thinking it was alround more stable on htceu spl
but i didnt try to fix anything yet..
maybe when i want to deploy something next time,
ill keep reporting..

mcsc said:
Microsoft doesn't support ID_CAP_INTEROPSERVICES" in mango, but not all xaps require it, I removed it from the Navigon xap and then re-deployed it and it ran fine all my maps work on mango
Click to expand...
Click to collapse
Did someone tried to use IC_CAP_INTEROPSERVICES in apps? Heard that too about the deactivation but I'm still looking for proof.

I have the same error 0x89731812 !
I can't deploy any XAP with Application Deployment. I can't debug too with Visual Studio Express (Failed to connect to device. Ensure the device is completly booted and connected to PC).
I have restarted PC and telephone and reinstalled SDK and Zune but the error is still here !

As far as I know the Mango update removes your unlock. I think the only method to keep it unlocked is to use the provxml method. I've got a Omnia 7 which got relocked after Mango beta update - then I restored my unlocked NoDo backup. I'll try the provxml method and tell you if it worked for me

yes its not that the device is not unlocked, it still is.
@zuifon:
did you notice at some point that windows tried to install drivers for your phone but couldnt find any?
it looks like only restore will resolve this error.. its still a beta..
but i dont know yet, i still didnt try it but thx for reporting,
so i wont have to check if reinstall the windows software fixxes it

My phone is unlocked by APPMFG.
Applications installed before Mango still work.
The message is the same if I disconnect the USB Cable, it's very curious !
Zune detects the phone but not the deployer.
I have deleted the phone in the periphal manager in Windows and driver have been redownloaded from Windows Update but the problem is the same.

zuifon said:
I have deleted the phone in the periphal manager in Windows and driver have been redownloaded from Windows Update but the problem is the same.
Click to expand...
Click to collapse
the unknown driver? or the phone driver?
my device manager does not show any unknown driver..
but it found unknown (the phone) hardware at some point..
now someone over here
reported that he also had used a different phone but can not deploy with the computer anymore. not sure if he has the same error code.

It's a phone problem. I have the same problem with a second computer.

hey guys,
i updated my dev unlocked omnia 7 to mango and re-unlocked it after having finished the update process.
for some reason, i cannot deploy any .xap to my phone, regardless of having ID_CAP_INTEROPSERVICES or not.
the software deployment software keeps telling me "the remotehost has closed the connection".
anyone have an idea? this is majorly annoying for me.
cheers,
phil

hey，I just think we have the same problem as you described，and i resolved it by my friends help. It's really easy, hey hey, just try to change it on another Universal Serial Bus. Hope can help you~~

heh actually i never tried using another usb port..
i have zuned the backup, everything working again.
maybe update to mango in some days

What on earth could be causing this? My phone (Optimus7) was in service and it got new mainboard. After it came back i did the usual tricks to unlock it etc. but now the deploying ends to this 0x89731812 error no matter what i try. Could anyone have an idea on where to start looking for the cause?

tkay564 said:
What on earth could be causing this? My phone (Optimus7) was in service and it got new mainboard. After it came back i did the usual tricks to unlock it etc. but now the deploying ends to this 0x89731812 error no matter what i try. Could anyone have an idea on where to start looking for the cause?
Click to expand...
Click to collapse
Same here, i don't know if it's warranty repair-related, i don't remember if i unlocked it after that (i relocked it way before mango, that's for sure)...but i got no new mainboard, they just replaced some components (based on repair list sheet), it seems strange they changed something so important to break developer connectivity

°Dexter° said:
Same here, i don't know if it's warranty repair-related, i don't remember if i unlocked it after that (i relocked it way before mango, that's for sure)...but i got no new mainboard, they just replaced some components (based on repair list sheet), it seems strange they changed something so important to break developer connectivity
Click to expand...
Click to collapse
Does anyone know if this could be repair-related or just software? i tried last chewron tool too, no changes, phone doesn't connect to "developer" tools.
I guess if there is any registry key related to developer connectivity, to check if they changed anything through some strange sw flash (hoping it's not really hw)