Related
Please dont get mad i looked every where to see if this had already been posted. When i run Hard-SPL I keep geting to 260 error it starts just fine asks me if i will grant access to the application which i do and it starts to do its thing but then halts and i get the 260 error and it dose not go any farther any suggestions?
did you remove your sim and sd card?
In addition, if you have not removed them back up your data. Then do a hard reset. Then remove sim and sd card. It maybe an open port problem so restart your computer as well. Hope this helps.
tried
Gave that a try after it asks if it is alright to load the file on my phone it auto resets phone then 260 error happening again im on vista 64 bit and even tried what the main website said for vista users but half the guide dose not really apply so im not sure what to do or what im doing wrong. any more suggestions?
Need Help
Anyone that has been able to run HardSPL on a vista 64bit system please point me in the right direction I really want to set up my custom roms on my phone that I have found! Please help!!!!!!!!
sorry i couldn't help you i always thought a 260 error was due to open connections or ports.
When you downloaded the zip file for hardspl did you use vista's unzip?
If so you may get an error because vistas unzip program sucks ass and you need to use another application to unzip the hardspl software.
crazigamer said:
Anyone that has been able to run HardSPL on a vista 64bit system please point me in the right direction I really want to set up my custom roms on my phone that I have found! Please help!!!!!!!!
Click to expand...
Click to collapse
Did you go through the connection settings in the mobile device manager and disable usb connections?
Are you using vista..sometimes it doesnt look for a new set of drivers for the Phone when its in tri color mode..try rebooting and leaving the phone in tri color mode...once you do that, start from scratch after it gets all the drivers installed
This advice is thanks to tochill. Try this and see if it works. Vista often does not automatically load the drivers. I used Vista 64 to flash without a problem. It was a little tricky to get it to load the drivers at first but after they are loaded you should be fine. If it doesn't work let me know and I will see if I can find the drivers for it.
Also make sure you have the most updated version of Windows mobile device center.
not sure what to do
When am I suppose to disable usb connections of the phone in WMDC ? and also I used winrar to extract the folder. also the phone auto reboots after it is promted to allow the program to launch to install hardspl and then I get the same 260 error again any more suggestions? Im sorry for all the trouble here I just really want to get this to work. everyone said it was easier to mod tilts but it seems to be harder then my iphone lol
update ur drivers if ur using vista
for me vista was a pain to flash so i just use my desktop which is xp and its happy flashing for me all the way...piece of cake now after u do it a few times
crazigamer said:
When am I suppose to disable usb connections of the phone in WMDC ? and also I used winrar to extract the folder. also the phone auto reboots after it is promted to allow the program to launch to install hardspl and then I get the same 260 error again any more suggestions? Im sorry for all the trouble here I just really want to get this to work. everyone said it was easier to mod tilts but it seems to be harder then my iphone lol
Click to expand...
Click to collapse
Before you connect your phone.
You don't need to do any of that. What you need to do is DL the USB driver from A/S & associate it with you device in WMDC. There are several good threads on doing it. Start Here: http://forum.xda-developers.com/showthread.php?t=291723
Even tried xp
I have even tried using XP I still get the same outcome my phone auto restarts after I tell it to run the program. What am I doing wrong? I am suppose to run the main file off of my PC not the phone correct? and just go trough the setup?
Can some one tell me how they did it step by step because I have followed the instructions on the HARDSPL main thread and it dose not work. And so I am correct this will work with the new ATT Tilt right?
tried all of that still dose not work any other vista run arounds? God i wish i still had my xp discs
Please feel free to message me on aim username is kl3pto really could use some help.
GSLEON3 said:
You don't need to do any of that. What you need to do is DL the USB driver from A/S & associate it with you device in WMDC. There are several good threads on doing it. Start Here: http://forum.xda-developers.com/showthread.php?t=291723
Click to expand...
Click to collapse
Thanks that was a thread I was looking for to post to the OP as the next step. I have had to reinstall vista 5 times and each 5 times had to do something different to get it to work.
NP, I also suggest with Vista, you flash HardSPL via Jump. Don't flash ROM's or Radios with JumpSPL, but with the 1.93 SPL, I have tons more success using the Flash HardSPL method than the .exe
I recently crashed my vista hard drive and decided to give windows 7 a try, its working wonders right now. The only problem is that I'm trying to put Nandroid back up on my computer again. I am at the step of trying to get the fastboot loader. It worked on Vista, but now it is saying that the "Driver is not intended for this platform." Is that due to windows 7? Is there a work around for this? Any help would be amazing, thanks.
I used Fastboot on Win7 7100 build yesterday, and it worked fine. Did you set everything up according to this post:
http://forum.xda-developers.com/showpost.php?p=3311708&postcount=2
This is all that I did, and everything worked flawlessly. Good luck.
hmm..yeah, i did do everything according to the tutorial exactly, do you have email, aim, gmail, etc? could you help me?
use the newest driver in this SDK..
http://developer.android.com/sdk/1.5_r1/index.html
If you dont see the ADB Device or whatever its called in the device manager you need to delete a generic volume and scan for hardware changes.... HTC talks about it here. I had to do it also...
http://www.htc.com/www/support/android/adp.html
Troubleshooting
fastboot.exe (on Windows) doesn't detect the ADP device properly
In some cases, Windows detects the ADP1 bootloader as a USB mass storage device, preventing fastboot.exe from accessing it. To resolve the issue, you can dissociate the USB Mass Storage driver from your ADP1 on your Windows machine and install the proper driver instead, as described in the steps below:
1. Boot the device into fastboot mode, as described above, and connect the device to your machine over USB.
2. Navigate to Start > Control Panel > System > Hardware > Device Manager > Universal Serial Bus Controllers. Observe that the ADP device is listed as a USB Mass Storage Device.
3. Right-click USB Mass Storage Device and select Uninstall. Windows then prompts you with a "New Hardware Found Wizard" message. If Windows doesn't prompt you, you can manually re-detect devices by selecting Action > Scan for hardware changes.
4. Install the USB driver included in the Android SDK, as described in Setting up a Device for Development on the Android Developers site.
thanks southsko, i'll try this and let you guys know how it works.
I tried your method Southsko, but it didnt work for me. I think the problem is that windows 7 refuses to install the driver for the htc dream, because its not "intended for this platform" is there a way to force it to install the driver? or manually install the driver?
When I wrote that tutorial it was using Windows 7 beta. I have also used it since I upgraded to Win7 RC, so I know that it can work. Did you make sure to install driver when the phone is connected and booted to the boot loader screen? Windows sees the phone as a different device when connected normally and at the boot loader. When I installed the driver It popped up with the message that it was for a different version, but it gave me an option to install it anyway. Are you logged in to Windows with admin rights?
i had the same problem earlier tonight, i figured since i was running win7 i might as well try using the virtual xp out. I started the VM up and the attached the phone using the drop downs and it worked flawlessly.
yup .. it's working fine for me too.. if you are using 64 bit version ... u need to use the 64 bit usb driver too... u can get it here
http://forum.xda-developers.com/showthread.php?t=446274
Also you may have trouble installing it in Windows 7 unless you turn off driver signing at boot menu. Hit F8 and select no driver signing and you should be able to install it no problem... u will also have to disable driver signing each time you plan on using adb/fastbboot
foxlin said:
I tried your method Southsko, but it didnt work for me. I think the problem is that windows 7 refuses to install the driver for the htc dream, because its not "intended for this platform" is there a way to force it to install the driver? or manually install the driver?
Click to expand...
Click to collapse
When choosing the driver software, make sure you select the "x86" folder instead of usb_driver or any parent folder. This is because the wizard search sub directories in alphabetical order, and will stop when it find the driver for x86-64(amd64). Then it will simply tell you "not intended for this platform" without looking in the x86 folder.
Also, you do not have to disable driver signing for this to work.
trmacdonal said:
When I wrote that tutorial it was using Windows 7 beta. I have also used it since I upgraded to Win7 RC, so I know that it can work. Did you make sure to install driver when the phone is connected and booted to the boot loader screen? Windows sees the phone as a different device when connected normally and at the boot loader. When I installed the driver It popped up with the message that it was for a different version, but it gave me an option to install it anyway. Are you logged in to Windows with admin rights?
Click to expand...
Click to collapse
I am in bootloader mode, and I am an admin. It didn't give me the option to install it anyways. That is interesting. I am currently still using the windows 7 beta. I have tried manually selecting the specific driver files. It is still not working, any other ideas?
I finally got it! thanks everyone. The solution was instead of having it search through the files, there is actually an option below it to pick the driver from a list, the list wasnt the right one originally, then i manually changed the directory and it worked. Thanks for the help everyone!
billc.cn said:
When choosing the driver software, make sure you select the "x86" folder instead of usb_driver or any parent folder. This is because the wizard search sub directories in alphabetical order, and will stop when it find the driver for x86-64(amd64). Then it will simply tell you "not intended for this platform" without looking in the x86 folder.
Also, you do not have to disable driver signing for this to work.
Click to expand...
Click to collapse
How come when I installed this on Beta I got the message that I could not install a non-digitally signed driver? I was not able to install it myself until I disabled it at boot... maybe the 32 bit version is signed.
Hi there!
I just tried to install Cotullas WM6.1 ROM on my Magician (MDA Compact, Radio 1.12), as it didn't work on Vista I used XP. Entering bootloader mode was no problem, but on the second page of Update.exe I get an overview:
Your device software is about to update from:
[Nothing in here]
To:
[Nothing either]
However the upgrade completed on the PC without an error message, but I got no "100% Upgrade OS Image Complete" message on my device an after a reset there's still WM2003se on it.
What's the problem and how can I fix it?
seems you have no USB connection between device and PC.
you should check it. check if you see on device screen "USB\n\n\n\n\n1.0X"
Yes, the device in Bootloader mode shows "Serial v1.0.2" an when I connect it via the cable Serial changes to USB. My guess would be that Update.exe checks the wrong port. But even if the phone is not connected at all the update finishes without error.
Is Active Sync needed for an upgrade?
Where did you extracted the ROM?
Can you try to extract on the desktop and don't put in any folder and then flash the ROM.
it's on my desktop in the folder "HTCMAG_ROM_WWE_O3", copying files directly on the desktop didn't change a thing
UPDATE: Installing Active Sync solved the problem
yes you need install Active Sync for drivers.
is there previous your ROM 2.03TX?
is that TRUE meaning you couldn't upgrade to anything else! 2.03TX is bad rom!!!
It was no problem with the upgrading-process itself, it was simply that the program didn't find the phone but showed no error message. Might have something to do with a newer driver ActiveSync installed or just some registry values the update-tool needed.
Hey guys I have read all the articles on how to flash my fuze and I feel pretty confident in how I am doing it but I am having no luck on getting my fuze to flash the HardSPL. I am trying to use OliNex flash instructions. What is happening is that I have hooked my phone to a XP machine running Active Sync 4.5. I also made sure I had the .NET Framework 3.5 loaded. I run the RaphaelHardSPL-unsigned_190_1_3.exe. I follow the on screen instructions and then all of a sudden my phone goes black and you can here through Windows that the USB connection disconnects. The status bar on the computer stays at 0% and then after a few minutes it gives me a Error 262 Update Error and then starts the recovery process. My phone still works, but I can't seem to get it to flash. Any ideas?
Thanks
-Smicale
This is an error with the Custom RUU Wrapper.
Extract the .nbh file and load to the root of your storage card, search on "flashing spl from SD Card" for specifics.
I believe you rename it raphimg.nbh or something like that but I don't remember.
Enter bootloader and it will load from your card.
Hmm, I didnt know that HardSPL thingy can be execute inside microSD. I thought only ROM. Anyway, what OS you're using? I still have no luck with Vista or Windows 7 as they're keep on disconnecting USB. So until any fix on this, I keep my XP around
u2pop said:
Hmm, I didnt know that HardSPL thingy can be execute inside microSD. I thought only ROM. Anyway, what OS you're using? I still have no luck with Vista or Windows 7 as they're keep on disconnecting USB. So until any fix on this, I keep my XP around
Click to expand...
Click to collapse
I have tried both XP and Windows 7 with no luck.
Bruce Inman said:
This is an error with the Custom RUU Wrapper.
Extract the .nbh file and load to the root of your storage card, search on "flashing spl from SD Card" for specifics.
I believe you rename it raphimg.nbh or something like that but I don't remember.
Enter bootloader and it will load from your card.
Click to expand...
Click to collapse
Bruce,
can you verify that this is possible to flash a SPL from SD card? If so I will try it right away.
Thanks
You can flash any .nbh file from bootloader.
Here is a brief instruction.
Also, for your PC issue, make sure you have netcf 3.5 installed.
preface for the people not reading ... some quick answers:
- our page on this Hard-SPL is always here: http://rhodiumw.htc-unlocks.com/hard-spl.php
- license: you will just have to run the program on the PC with phone connected, normally you will not notice anything about the licensing, it is totally free for personal use!
- if you need help with license issues (when it says you already unlocked a device), you can send your message at: http://support.htc-unlocks.com
[SIZE=+2]Hard-SPL Release Time!!!! [/SIZE]
[SIZE=+2]NOTE: This is NOT a SIM unlocker - it also doesn't unlock Security for other radios. if you need that, GO HERE[/SIZE]
[SIZE=+2]NOW UPDATED -> if you already installed HardSPL, you will not need this update. but if you are going to HardSPL only now, it applies to you (package will lead you to update link anyway).[/SIZE]
Preface: okay, it was released only this weekend! but trust me the wait was worth it as it works really great and smooth now!
Licensing information: it's like with previous Hard-SPL unlockers - every user gets one free use of the Hard-SPL, further use is subject to paying a small amount per device.
however, if you are a private user, you can have other uses free on request if needed, such as using it on a replacement device.
the license is valid forever and all this works as transparently as possible, so for normal users nothing is noticable; while businesses who need to unlock more devices than that, can use the link inside the program to send payment or contact cmonex or Olipro if you want to discuss bulk unlocking.
contact info is: via support link at our site
IMPORTANT: please do not use this contact info for asking help for problems unrelated to licensing unless you are a paying customer. other messages will not be answered - instead you can use this thread to post about your issues!!!
Preparations:
0) this package is for Rhodium CDMA-GSM worldphone version only (CDMA Touch Pro 2, not the original Touch Pro) devices. only RHOD400, RHOD500 modelids are accepted. this Hard-SPL supports WM6.5.
1) if you have Vista / Windows 7, WMDC update to 6.1 (or whatever is latest) is recommended.
Instructions: read this if unsure how to install Hard-SPL... if you are an experienced user then you'll probably not need to read most of this but if you are unsure or run into an issue, then you should read the following!
Steps:
1) download newest RhodiumW Hard-SPL package and extract this to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!!! the device needs to be connected to Activesync or WMDC via USB cable. and it must not be in Flight/Airplane mode (i.e. the phone part should be on).
3) internet access is required as the program checks online for updates and for the license.
4) run Rhodium-HardSPL.exe on your PC, make sure it's launched from a local drive (not through network drive, etc.). running it on XP requires Admin logon, and Vista/Windows 7 will automatically prompt to allow it to run in Admin mode, so allow it please.
important: if you get an antivirus warning, please ignore it, it contains no harmful code (just used a packer to compress it). if you encounter DEP errors, then add it to the exception list in DEP settings.
5) follow steps as prompted in the Hard-SPL program. if this is the first run of Hard-SPL on a device after hard reset, you must select Automatic flash mode (the first button in Welcome screen).
notes: you should usually go for Automatic flash mode; the Manual flash option is only to be used as noted below - any other errors triggered while running in Autoflash mode will have to be fixed as instructed in the error message.
6) it will ask you to wait while it prepares for the flashing, press OK.
7) now it should go through without any error messages, if one does pop up, then please follow the instructions included in the error text. if no specific instruction is shown, then ask for help in the forums, but this should not ever occur (as this means a really fatal error occurred).
at this point the device did hopefully went to a black screen. this is the SSPL version, which is temporary. then RUU (Rom Update Utility) will instantly launch.
9) some notes: when RUU says it will perform a hard reset and cause data loss, do not worry, it is not going to do this. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
10) SPL flashes, device automatically reboots, job done.
11) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.00.OliNex, which is the current Hard-SPL version.
More Notes:
NOTE 1: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, you need the following key combination: Power Button + Volume Down + Reset Button. means, do a soft reset while holding the "volume down" key and power key on the side of the device. hold these keys until you see a special tricolour screen which is the bootloader mode.
NOTE 2: this is unsigned Hard-SPL. no limitations on flashing ROMs (except of course some Radio roms). also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted on our site. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps in the next post about how to reflash stock SPL.
NOTE 3: anyone having USB connection problems with the device after it already entered SSPL mode, please copy SSPL-Manual-Rhodium.exe from SSPL-Manual-RhodiumW.zip (available on our site), copy it to the device and run it. then once the screen has gone black, run the Hard-SPL package on the PC and you must select Manual flash option. *important*: make sure that the USB cable is plugged in and device is synced to Windows Mobile even if doing manual method.
NOTE 4: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! nothing other than SPL's made by Olinex team will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or a customRUU if you need to flash cooked ROMs.
NOTE 5: supported OS versions: both 32-bit and 64-bit XP, Vista, Windows 7RC and later. Windows 2000 was untested, and pre-RC win7 (lower than build 7100) is explicitly not supported. also, the program may be unstable or not work on Virtual systems, so it's recommended to try outside Virtual OS software.
Troubleshooting: and Step by Step on reflashing stock SPL: are in next post below!
Credits:
first, "OliNex" is a team which means: cmonex + Olipro
Olipro -> concept of EXE program that runs on the PC, Hard-SPL concept, server-side license code and maintaining the licenses.
cmonex -> HSPL package on PC, SSPL loader for windows mobile and SSPL binary. Hard-SPL binary. (SSPL loader: partially based on haret and old pof&Olipro jumpspl code),
[SIZE=+3]Donations are always appreciated, the Hard-SPL program will provide you with a link at the end of the process to make it easier. any little helps!!! Thank you![/SIZE]
and now enjoy!
-continued from first post-
Manual SSPL download: (added soon)
Troubleshooting:
firstly:
- read the instructions above.
- read the instructions above.
- read the instructions above.
nothing happens on the device, does not enter black screen mode:
- anyone having problems with the device crashing instead of entering SSPL, make sure you've used Automatic flash mode before to put the device in SSPL (if you hard-reset your device, you have to repeat Automatic flash mode at least once).
- please make sure you watch the device screen if it asks about running files (it probably won't, I made sure of that, but just in case, check, for example it can warn about model incompatibility).
- also you can try unticking advanced usb/network functionality in settings on the device. exact location of this will probably be: start menu / settings / connections / usbtopc applet.
general usb connection error problems:
- if you get connection error in RUU after the device goes to black SSPL screen: make sure device was still synced via USB to the PC at the point of it entering SSPL (the black screen) and do not try replugging please, that will probably just crash SSPL.
- it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the USB connection is established in SSPL, RUU will see device. if not (happens very rarely), wait for RUU to time out (or wait a few minutes). then remove back cover, reset, it will boot OS again, then you can retry unlocking process.
- anyone having problems with the device entering SSPL without functional USB port ("ERROR 260 CONNECTION" RUU error), you can get SSPL-Manual-Rhodium.exe from attachment in this post, copy it to the *device* itself and run it. then once the screen is showing black, run the Hard-SPL package on the PC and select Manual flash option. please do not use Manual flash option for any other purposes
- try a different USB port
- try different USB cable
- do not touch USB cable during the process especially if it is already a bit dodgy
- also do not use USB hub
- you can also try rebooting your PC
- and you can try using another PC.
- another reason for USB connection error: if your PC takes too long to load the drivers (if your device is in bootloader for the first time it needs to do that), then if RUU times out, but device is still in black screen, just leave it there and re-run the Hard-SPL package when driver installation finishes - you must use Manual Flash option in such a case. I recommend to wait for Windows to take its time searching for the USB drivers, then click Next in RUU only when they are installed.
- finally, you can try disabling antivirus or firewall programs on the PC.
ModelID checking: if SSPL loader says it's for a different model or device, please make sure you are using the correct HardSPL package. currently this SSPL accepts only RHOD400, RHOD500 modelids i.e. the CDMA-GSM worldphone version, but if we get notified of another compatible RhodiumW version, we will instantly modify it to allow those models. check modelid by entering SPL tricolour screen manually and note what it says (RHOD400, RHOD500, or something else). note: RHOD1xx, 2xx, 3xx are not going to be compatible at all!
other issues:
- if device reports that Enterbootloader.exe fails to run (says missing component or corrupt signature or similar), try a hard reset.
- if device reboots instead of going to SSPL screen (black), which is very unlikely to happen, then contact us by PM to cmonex. do not PM OliNex user, that is not monitored frequently (and PM's to it are disabled now anyway).
- if none of the above help, read thread for further suggestions, if still nothing, make a post in thread describing all details about the exact situation.
how to reflash Stock/Shipped SPL: - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in.
1. download the Relocker by clicking here, extract the zip and run the EXE on your PC
2. if you wish to replace RUU_Signed.NBH that got extracted, feel free to do so, but not necessary (this Hard-SPL will only allow overwrite with a SPL made by us). the included one is the 0.63.0000 stock SPL. 3. flash
4. verify if it flashed by checking version in tricolour screen, it should say 0.63.0000, not 1.00.OliNex.
About UPDATES:
-new release coming soon, fixes a specific problem for a small group of people-
-more troubleshooting tips soon-
Consider yourself... sticky
Thank you Olinex. Great WORK
thank you! can someone please tell me what this does for my vzw tp2? thank you so much .
buggs1a said:
thank you! can someone please tell me what this does for my vzw tp2? thank you so much .
Click to expand...
Click to collapse
In a nutshell, this basically will allow you to flash custom made roms and other assorted customizations.
Hey, thank you.
Does using this and then not putting a custom rom on it right away do anything bad? Like waiting for a 6.5.1 rom or something. Sorry if this isn't the right place. Forgive me please.
Crashes on vista x64 sp2 home premium. as soon as I click to open the hard spl exe it crashes.
You can wait as long as you want to flash another rom, custom or carrier. So no worries in holding off.
Thanks so much for answering.
Here's something.
Crashes on vista x64 sp2 home premium. as soon as I click to open the hard spl exe it crashes.
I just tried. I don't get it.
My mcafee doesn't have a trust app add feature that i can see so i turned off real time scanning to extract the file and then run it. Then the hard spl crashes when i try to run it. I hit auto flash and immediately it crashes.
What specific error message(s) are you getting?
Nothing specific. It just crashes and the windows app crash pops up. That's all that I can remember. Should I try again and look for something specific?
Also I would like to say that I connected the phone to my pc via usb cable and that's it. On phone opened the disk mode or active sync selection but I didn't touch anything in time then it disappeared. The phone showed up as a hard drive in explorer. I didn't do anything else when trying to run the hard-spl exe. Should I have?
Thanks a million.
You need to make sure you're connected to your computer and sync up with ActiveSync. Once that's all connected properly, then you can run hspl.
but how do i do that? i noticed just now i reconnected phone and active sync was selected on the phone, but nothing comes up on windows vista except the auto run and it says synch with media player or open to view files or do nothing.
Oh, Vista. Right. You'll need to use Windows Mobile Device Center then. Install that, reboot, then sync up with that (it's ActiveSync's replacment for Vista and Windows 7). Then you should be able to run hspl fine.
That you very much Oli, and to all the people who worked so hard on this! I just put it on my Verizon Touch Pro 2 and it went like a snap, but what software from you doesn't A nice donation is coming yer way me matey!
thanks. that did it.
i got to the part where it said make sure the battery has 50% or more. i said cancel and now my phone is off and won't come on. I disconnected usb and tried to turn it on and nothing happens. reconnected phone and tried to do this again and it told me i need to active synch again. but i can't turn on phone right now. I don't know what to do now.
Have you tried taking out the battery of the phone, reinserting it and turning it back on?
trying now except i dont know how to open it. ok my bad. had to remove stylus. it's on now.
Ok sweet. It rebooted the phone. Success I suppose. Now to find a rom.... But then I dunno what to look for. hmm...
lol
buggs1a said:
trying now except i dont know how to open it. ok my bad. had to remove stylus. it's on now.
Ok sweet. It rebooted the phone. Success I suppose. Now to find a rom.... But then I dunno what to look for. hmm...
lol
Click to expand...
Click to collapse
Glad you got it figured out. Have fun finding a good rom that suits you.
edit: since we don't really have much of a CDMA TP2 selection just yet, I'd recommend checking here. He makes a great ROM. Just be sure not to discuss ROMs in this thread.
I posted this at PPCGeeks also, but here is a problem I am having while trying to unlock in Windows 7 x64 using WMDC.
1. Ran the .exe
2. Screen pops up "Preparing to flash, press ok to wait. I press ok.
3. The screen goes black (like it's supposed to), Active Sync DISCONNECTS, and a box pops up: "Welcome to the ROM update utility...". I check the box "I understand the caution..." and click next.
4. The next box pops up "Follow the instructions..." and I check the box "I completed the steps..."
5. A box pops up: "Verifying the information on your PDA phone...please wait..."
6. About 30 seconds go by, and an error box pops up: Error [260]: Connection...
7. The screen remains black and the phone non-functional. I have to soft-reset the device at this point.
When I soft-reset in #7 above, the computer dink-donks like when you disconnect the UBS cable, so there's still some sort of connection the PC is recognizing. I tried a second time after installing the enablerapinew.cab (using auto mode) and got the exact same errors.
Any thoughts?