I have a MDA Pro running WM2005 and everytime I try and install TOMTOM I get the error shown in the attachment and the software shuts down. I am using Activesync 4 for the connection
Thanks
I don't get exactly the same error but the setup also fails for me.
To get round the problem just copy the .cab and .ini files directly to your memory card then run each of the installs manually.
Worked for me.....
Related
hi, i am a newbie to the xda's and this is the problem i have, using xda2 on 02 rom ver 1.72, radio ver 1.17. i have no problem connecting to laptop SO xp pro, but when i try to install a new programe to it, it starts to load and then tries to open add or remove programme then stops the installation.if i try to open add or remove programme in active sync on the laptop it fails to open and i get error message telling me to disconnect from cradle and try again. if anyone has any idea's i would be glad to hear them thanks :evil:
Hi Folks,
first thanks for the new rom. Here my experiences/questions.
First of all, the installation went quite smooth.
I am experiencing the following problems:
1) when starting the device I get the message the file screenrotate.exe cannot be opended. Ehter it is not signed with a trusted certificate or one of its components cannot be found. Same for sms_alert_fix.exe
2) phone link at the left bottom of the screen results in Shortcut Target Error opening the shortcut or locating the target filename
3) active sync with sbs2003 exchange and own certification authority results in The security certificate on the server is invalid. Contact you exchange server administrator or isp to install a valid vertificate on the server Support code: 0x0072F0D. I have downloaded the CA certificate as a file certnew.cer, copied it over to WM2005 and installed it. It is availiable under settings - certificates - root
4) Start - programs is has corrupted programs IA Album, IA Camera, xBackup
Any ideas how to work on these problems?
Tnx
What is the exactly name of the rom file you have downloaded to flash your device ?
XDA2_WM2k5_1.70a.96.WWE.zip ??? if this , it is a corrupted rom ...
try to flash http://tofclock33.free.fr/rom/Wm2k5_170.zip
Downloaded your link and still the same.....
OK, my mistake.
Did not read the installation instruction up to the end.
after modifying the boot options it appears that point 1,2 and 4 are solved.
But there is still the active sync problem.
OK, my mistake.
Did not read the installation instruction up to the end.
after modifying the book options it appears that pint 1,2 and 4 are solved.
But there is still the active sync problem.
Changed HKLM\Security\Policies\Policies\00001017 from 128 to 144
My Domain runs its own CA. So I went to
http://<certserver>/certsrv and downloaded "Download CA certificate", copied it over to XDA and doubleclicked on it.
I can see it now in the certificates
If I manually go to OWA using internet explorer I receive the message "The certificate was issued by a company you have not chosen to trust"
How can I trust it?
XDA2_WM2k5_1.70a.96.WWE.zip ??? if this , it is a corrupted rom ...
I have used the above file from day 1 and it was not corrupt!!!
OK, sorted out my last issue as well.
Besides installing the CA-Certificate I needed to install the Server Certificate as well.
This could be done by opening MMC, adding the Certificates snapin for local machine and exporting under personal certificates the servers certificate.
Copy the export to MMC and doubleclick on it. That's it.
i installed the wm2k5_170.zip
but have problems..
when trying to install any program..
most of the programs needs to be installed to local, but it seems i have 6 mb memory after installing the rom..
i have 32 mb storage memory and 1gb sdram.. but for example pocket plus wants to install itself to device memory.. and when trys to install it says that i dont have enough space..
A slightly strange ugrade problem
TofClock - thanks for the 1.65 and 1.70 upgrades. I've had a weird problem that's stopped me performing the upgrade. I thought I'd ask if it's something specific to your upgrades or some other problem:
I've got Buzz's 1.60c.00 with his 96Mb RAM disk on my Humalaya and it works like a charm. However, when I tried the 1.65 and 1.70 upgrades HimaUpgradeUt.exe failed both times with Error 101 - connection error. But my Himalaya IS securely in its cradle and seems to be communicating properly with the PC: ActiveSync, for example, seems to work perfectly.
The cradle is connected directly to a USB port on my PC and not through a hub, so I'm at a loss what's causing the problem.
Has anyone else had the same experience?
I have got
rom version: 2.06.00WWE
Rom date: 06/14/04
radio version: 1.18.00
protocol version: 1337.38
extended ROM version: xda2jopjo.v3.2zs
When upgraded to xda2jopjo.v3.2zs I had no problems. When I loaded xda2jopjo.v3.2zs it did tell me the all the information under "your Pocket PC software is about update from:", and then it loaded properly. However, with every version of 2005 it gives me none of the information on what I am updating from, and the only information he gives me I'm updating to is "ce image version: 1.70a.96.
And when I click on the upgrade button anyway it does try to upgrade, there is even some activity on the xda, but every time after about 10 minutes it tells me "the current software is now being erased from your PC", it tries a little longer and then tells me "there has been a problem while updating your pocket PC software. To continue the update please:
1 disconnect your Pocket PC and the USB cradle.
2 preform a normal reset by pressing the reset button as picture left show.
3 reconnect your Pocket PC and the USB cradle and run this pocket PC software update program again.
I've tried this several times, but it hasn't worked.
Can anybody help?
fk
Dear All
I still cannot upgrade from WMM2003se to WM205 ROM 2.01 64MB!
I downloaded ROMs from
http://buzzdev.net/component/option,com_frontpage/Itemid,1/
I get error 101
Can you please provide detailed upgrade istructions?
I have downloaded XDA_WM2k5_2.01a32WWE and XDA_WM2k5_2.01a64WWE and XDA_WM2k5_2.01a00WWE. I have tried them all.
Since error 101 alsways shows up, I have downloaded and tried HimaUpgradeUt_noID.exe (I put it in the same directory of Radio_.nbf and nk.nbf SEE ATTACHED PIC)
I have read many times 'READ_THIS_FIRST.txt'
I use bootloader 1.06
I get 'SERIAL' message on my XDAII when entering in boot mode and then USB, when connecting the USB cable DIRECTLY to my PC
I use activesync 4.1 : DO I NEED TO DOWNGRADE TO 3.8?
In fact Active Sync 4.1 maybe using network conflicting parameters?
I disabled antiviris and Zonealarm
Please help!
Saulo
Don't know much,but will ask you a question for orther to solve.
Do you use hub or use direct USB connection with your device?
dear Vivi
I use direct USB connection.
When cable is inserted, the device message change from 'serial' to USB'
Thanks and waiting
Saulo
Try reading this thread(click) .
Hope this help.
Try to include this in the installation folder...
In Windows Task Manager Kill the: "wcescomm.exe", "rapimgr.exe", and "wdfmgr.exe"
Hit the "HimaUpgradeUt_noID.exe" to start again.
jojo
Dear Buzzdev
Now in WM203se I have 125.86 MB Memory available for my programs or storage. I can allocate them and increse/decrease storage program ratip
After installed Windows Mobile what will be the scenario?
I heard someone saying only 32MB available (NOT allocable) between storage and program. Other saying 64MB other 90MB max
Please let me now
Thanks
Saulo866
Hello,
I have just upgraded my treo750v with 2.27. I have strictly followed the process and everything goes well even replications.
The only issue is the fact that I can't activate anymore my phone. When I try, device tells me : "A problem has occured with device.exe / please tell Microsoft about this problem....".
Other issue is that when I want to recover following your process, I find the folder but there is no T750URT.exe nor any other file.
Hereafter my configuration :
Windows XP SP2
Activsync 4.5.0 build 5096
phone id : Can't give as each time I want to get it, I have the waiting icon then "A problem has occured with device.exe / please tell Microsoft about this problem...."
Memory free : 36MB
Can you someone help me ? Even send tell me how to get a former SW with WM5.
Thanks in advance,
perform the upgrade again using the SD version (or extracted cheeimg_fw.nbh from updater) and KaiserCustomRUU.exe (search for file and how-to).
Then run UpdInfo.CAB (extracted from updater) to set version to 2.27
Hi,
Tks for the steps
For SD update it is OK.
I can't find anything clear enough for Kaisercustommruu.exe.
Issue solved
In fact, issue was coming from a wrong installation. I consequently unzip the download file (treo 750.....device installer) with winzip (can also with winrar) then launch T750URT.exe.
The recovery tool launch a new instal and everything goes well now.
In all cases, tks for your help and this great forum which teaches me a lot of things on my Treo 750.
Excellent, glad you figured it out!
The gist with KRUU.exe is to rename the file from "cheeimg" to "RUU_signed"
Hi,
I've been trying to install TomTom Navigator 7 on my Samsung BlackJack II, and every time I try to install the .cab file I get a message about an error with umarshaller.exe, and it fails to install. It doesn't matter if I'm installing it to the storage card, or to the device.
Any ideas? Is TTN7 touch-screen only?
Just a small update..
I downloaded TomTom Navigator 6 to try that out, and it's not working as well. I get an "installation of ttn.cab was unsuccessful. They all crash at the same time in the installation..usually after the first bar. I have read other posts of people installing it successfully..is there something I'm missing here that's causing it to not work? I'm installing it from a 4GB microSDHC
same problem with umarshaller
I am having the same exact problem with umarshaller.exe when trying to install tomtom 7 on my Samsung Jack II.
Did you have any luck? Or did you just give up??
i am having the same problem with samsung propel pro...need some help
hi
i want to try if you send me the link i ll be happy...thanks