Hi Folks,
first thanks for the new rom. Here my experiences/questions.
First of all, the installation went quite smooth.
I am experiencing the following problems:
1) when starting the device I get the message the file screenrotate.exe cannot be opended. Ehter it is not signed with a trusted certificate or one of its components cannot be found. Same for sms_alert_fix.exe
2) phone link at the left bottom of the screen results in Shortcut Target Error opening the shortcut or locating the target filename
3) active sync with sbs2003 exchange and own certification authority results in The security certificate on the server is invalid. Contact you exchange server administrator or isp to install a valid vertificate on the server Support code: 0x0072F0D. I have downloaded the CA certificate as a file certnew.cer, copied it over to WM2005 and installed it. It is availiable under settings - certificates - root
4) Start - programs is has corrupted programs IA Album, IA Camera, xBackup
Any ideas how to work on these problems?
Tnx
What is the exactly name of the rom file you have downloaded to flash your device ?
XDA2_WM2k5_1.70a.96.WWE.zip ??? if this , it is a corrupted rom ...
try to flash http://tofclock33.free.fr/rom/Wm2k5_170.zip
Downloaded your link and still the same.....
OK, my mistake.
Did not read the installation instruction up to the end.
after modifying the boot options it appears that point 1,2 and 4 are solved.
But there is still the active sync problem.
OK, my mistake.
Did not read the installation instruction up to the end.
after modifying the book options it appears that pint 1,2 and 4 are solved.
But there is still the active sync problem.
Changed HKLM\Security\Policies\Policies\00001017 from 128 to 144
My Domain runs its own CA. So I went to
http://<certserver>/certsrv and downloaded "Download CA certificate", copied it over to XDA and doubleclicked on it.
I can see it now in the certificates
If I manually go to OWA using internet explorer I receive the message "The certificate was issued by a company you have not chosen to trust"
How can I trust it?
XDA2_WM2k5_1.70a.96.WWE.zip ??? if this , it is a corrupted rom ...
I have used the above file from day 1 and it was not corrupt!!!
OK, sorted out my last issue as well.
Besides installing the CA-Certificate I needed to install the Server Certificate as well.
This could be done by opening MMC, adding the Certificates snapin for local machine and exporting under personal certificates the servers certificate.
Copy the export to MMC and doubleclick on it. That's it.
i installed the wm2k5_170.zip
but have problems..
when trying to install any program..
most of the programs needs to be installed to local, but it seems i have 6 mb memory after installing the rom..
i have 32 mb storage memory and 1gb sdram.. but for example pocket plus wants to install itself to device memory.. and when trys to install it says that i dont have enough space..
A slightly strange ugrade problem
TofClock - thanks for the 1.65 and 1.70 upgrades. I've had a weird problem that's stopped me performing the upgrade. I thought I'd ask if it's something specific to your upgrades or some other problem:
I've got Buzz's 1.60c.00 with his 96Mb RAM disk on my Humalaya and it works like a charm. However, when I tried the 1.65 and 1.70 upgrades HimaUpgradeUt.exe failed both times with Error 101 - connection error. But my Himalaya IS securely in its cradle and seems to be communicating properly with the PC: ActiveSync, for example, seems to work perfectly.
The cradle is connected directly to a USB port on my PC and not through a hub, so I'm at a loss what's causing the problem.
Has anyone else had the same experience?
I have got
rom version: 2.06.00WWE
Rom date: 06/14/04
radio version: 1.18.00
protocol version: 1337.38
extended ROM version: xda2jopjo.v3.2zs
When upgraded to xda2jopjo.v3.2zs I had no problems. When I loaded xda2jopjo.v3.2zs it did tell me the all the information under "your Pocket PC software is about update from:", and then it loaded properly. However, with every version of 2005 it gives me none of the information on what I am updating from, and the only information he gives me I'm updating to is "ce image version: 1.70a.96.
And when I click on the upgrade button anyway it does try to upgrade, there is even some activity on the xda, but every time after about 10 minutes it tells me "the current software is now being erased from your PC", it tries a little longer and then tells me "there has been a problem while updating your pocket PC software. To continue the update please:
1 disconnect your Pocket PC and the USB cradle.
2 preform a normal reset by pressing the reset button as picture left show.
3 reconnect your Pocket PC and the USB cradle and run this pocket PC software update program again.
I've tried this several times, but it hasn't worked.
Can anybody help?
fk
Related
Dear All
I still cannot upgrade from WMM2003se to WM205 ROM 2.01 64MB!
I downloaded ROMs from
http://buzzdev.net/component/option,com_frontpage/Itemid,1/
I get error 101
Can you please provide detailed upgrade istructions?
I have downloaded XDA_WM2k5_2.01a32WWE and XDA_WM2k5_2.01a64WWE and XDA_WM2k5_2.01a00WWE. I have tried them all.
Since error 101 alsways shows up, I have downloaded and tried HimaUpgradeUt_noID.exe (I put it in the same directory of Radio_.nbf and nk.nbf SEE ATTACHED PIC)
I have read many times 'READ_THIS_FIRST.txt'
I use bootloader 1.06
I get 'SERIAL' message on my XDAII when entering in boot mode and then USB, when connecting the USB cable DIRECTLY to my PC
I use activesync 4.1 : DO I NEED TO DOWNGRADE TO 3.8?
In fact Active Sync 4.1 maybe using network conflicting parameters?
I disabled antiviris and Zonealarm
Please help!
Saulo
Don't know much,but will ask you a question for orther to solve.
Do you use hub or use direct USB connection with your device?
dear Vivi
I use direct USB connection.
When cable is inserted, the device message change from 'serial' to USB'
Thanks and waiting
Saulo
Try reading this thread(click) .
Hope this help.
Try to include this in the installation folder...
In Windows Task Manager Kill the: "wcescomm.exe", "rapimgr.exe", and "wdfmgr.exe"
Hit the "HimaUpgradeUt_noID.exe" to start again.
jojo
Dear Buzzdev
Now in WM203se I have 125.86 MB Memory available for my programs or storage. I can allocate them and increse/decrease storage program ratip
After installed Windows Mobile what will be the scenario?
I heard someone saying only 32MB available (NOT allocable) between storage and program. Other saying 64MB other 90MB max
Please let me now
Thanks
Saulo866
Since upgrading to AS 4.5, I can no longer install applications on my htc Touch.
The error message reads:
"Application Manager cannot intall this application on your mobile device due to an error in the setup file. Reinstall and try again"
Happens with all .exe files and I have re-installed AS4.5 several times and tried "Repair".
Don't think it's an issue with programs that weren't designed for WM6 because I can't install the Sprite and spbGPRS programs from the htcTouch CD
I'm running XP Home SP2 and log on with Administrator privilages
The files install OK on my work PC which runs XP2 Prof SP2 with no Administrator privilages.
Any ideas anybody?
Anybody else...
...having this problem?
http://support.microsoft.com/kb/256020
http://www.google.com/search?source...an+error+in+the+setup+file&btnG=Google+Search
maybe
Been there, done that
no answers anywhere I can see.
The Microsoft site only applies to specific programs, like the Media Player one you pointed to or Powerpoint.
Only thing I can find is possibly the .ini file doesn't have the correct version notation for instance it states version 1 instead of version 1.0
That still doesn't explain why they all install on the PC at work though.
Both PCs running AS4.5, both running Windows XP
i dont really thing activesycn is good at cleaning up after itself when reinstalled and or uninstalled
i've seen lots of files in it's dir
and lots of registrys it leave behind
a good cause would go and hunt them down and make sure
that a reinstall is really a reinstall
Hello,
I have just upgraded my treo750v with 2.27. I have strictly followed the process and everything goes well even replications.
The only issue is the fact that I can't activate anymore my phone. When I try, device tells me : "A problem has occured with device.exe / please tell Microsoft about this problem....".
Other issue is that when I want to recover following your process, I find the folder but there is no T750URT.exe nor any other file.
Hereafter my configuration :
Windows XP SP2
Activsync 4.5.0 build 5096
phone id : Can't give as each time I want to get it, I have the waiting icon then "A problem has occured with device.exe / please tell Microsoft about this problem...."
Memory free : 36MB
Can you someone help me ? Even send tell me how to get a former SW with WM5.
Thanks in advance,
perform the upgrade again using the SD version (or extracted cheeimg_fw.nbh from updater) and KaiserCustomRUU.exe (search for file and how-to).
Then run UpdInfo.CAB (extracted from updater) to set version to 2.27
Hi,
Tks for the steps
For SD update it is OK.
I can't find anything clear enough for Kaisercustommruu.exe.
Issue solved
In fact, issue was coming from a wrong installation. I consequently unzip the download file (treo 750.....device installer) with winzip (can also with winrar) then launch T750URT.exe.
The recovery tool launch a new instal and everything goes well now.
In all cases, tks for your help and this great forum which teaches me a lot of things on my Treo 750.
Excellent, glad you figured it out!
The gist with KRUU.exe is to rename the file from "cheeimg" to "RUU_signed"
Hi all,
I tried almost everything but I cannot connect to my exchange account. With our IT we enabled OMA, OWA also, I installed the self-signed certificate on my Touch Pro, tried with and without SSL, erased the account on the device to create it from scratch, read all the posts, googled and tried what suggested but still get connecting for a while and then Error Synchronizing (built-in e-mail client), when I switch to active sync and view status I get "Synchronization couldn't be completed. Try again later" and Support code says 0x80072F17 (certificate related). WHen I set up my iPhone with the account details I sync without problem all the mails with subfolders...Any help?
snekoza said:
Hi all,
I tried almost everything but I cannot connect to my exchange account. With our IT we enabled OMA, OWA also, I installed the self-signed certificate on my Touch Pro, tried with and without SSL, erased the account on the device to create it from scratch, read all the posts, googled and tried what suggested but still get connecting for a while and then Error Synchronizing (built-in e-mail client), when I switch to active sync and view status I get "Synchronization couldn't be completed. Try again later" and Support code says 0x80072F17 (certificate related). WHen I set up my iPhone with the account details I sync without problem all the mails with subfolders...Any help?
Click to expand...
Click to collapse
i had the same problem and later i realized that there two different reasons for this problem. but before i can help i need to know two things. 1st what rom and build version r u using? 2nd what version of htcalbum r u using?
Thank you for the quick rsponse, I hope you can help me. The ROM version is 1.90.401.1 WWE, Radio 1.02.25.19, as for album I have the version that was originally distributed (I could find any version number), BTW it is very slow on loading.
snekoza said:
Thank you for the quick rsponse, I hope you can help me. The ROM version is 1.90.401.1 WWE, Radio 1.02.25.19, as for album I have the version that was originally distributed (I could find any version number), BTW it is very slow on loading.
Click to expand...
Click to collapse
so you don't have a cooked rom or an updated verison of htc album of 2.5 or 3.0?
nothing, everything as shipped.
snekoza said:
nothing, everything as shipped.
Click to expand...
Click to collapse
then i don't know, my problem had to do with a cooked rom and after upgrading to htcalbum 2.5, sorry
Make sure you have the correct root certificate as well. Im using a free ssl cert from Startcom and I have to have both the Intermediate and Root certs installed for it to work because by default the root cert isnt there. You can check this out by Start > Settings > Certificates.
Ren13B I have just intermediate cert installed, the one that OWA is using, self-signed. Can you tell me more about how to make it appear in ROOT tab?
snekoza said:
Ren13B I have just intermediate cert installed, the one that OWA is using, self-signed. Can you tell me more about how to make it appear in ROOT tab?
Click to expand...
Click to collapse
The fastest way I've seen to do this is search for a Microsoft tool called "SSLChainSaver". There are instructions on the site for using it, but the short form is:
Code:
sslchainsaver.exe [I]<exchange hostname>[/I]
This creates a directory with the certificates, and also creates two XML files containing the full certificate chain, one for Windows Mobile 5, and one for WinMo 6.
Find the XML file you want (<exch. server>.wm6.xml, probably), copy to _setup.xml, and make it a .CAB file:
Code:
copy exchserver.wm6.xml _setup.xml
makecab certs.cab _setup.xml
This creates a .CAB file you can download directly to your phone containing all the necessary SSL certificates for your server.
Hope that helps...
It seems there is something wrong with our OWA certificate, I found out that issuer has to be same as subject which is not, so even the tool work smoothly it could not get the root cert...Strange that iPhone has no problem with that but WM6 does:-(
Hi there!
I just tried to install Cotullas WM6.1 ROM on my Magician (MDA Compact, Radio 1.12), as it didn't work on Vista I used XP. Entering bootloader mode was no problem, but on the second page of Update.exe I get an overview:
Your device software is about to update from:
[Nothing in here]
To:
[Nothing either]
However the upgrade completed on the PC without an error message, but I got no "100% Upgrade OS Image Complete" message on my device an after a reset there's still WM2003se on it.
What's the problem and how can I fix it?
seems you have no USB connection between device and PC.
you should check it. check if you see on device screen "USB\n\n\n\n\n1.0X"
Yes, the device in Bootloader mode shows "Serial v1.0.2" an when I connect it via the cable Serial changes to USB. My guess would be that Update.exe checks the wrong port. But even if the phone is not connected at all the update finishes without error.
Is Active Sync needed for an upgrade?
Where did you extracted the ROM?
Can you try to extract on the desktop and don't put in any folder and then flash the ROM.
it's on my desktop in the folder "HTCMAG_ROM_WWE_O3", copying files directly on the desktop didn't change a thing
UPDATE: Installing Active Sync solved the problem
yes you need install Active Sync for drivers.
is there previous your ROM 2.03TX?
is that TRUE meaning you couldn't upgrade to anything else! 2.03TX is bad rom!!!
It was no problem with the upgrading-process itself, it was simply that the program didn't find the phone but showed no error message. Might have something to do with a newer driver ActiveSync installed or just some registry values the update-tool needed.