Hi all,
i'm new to these flashing things, and i need some help.
my qtek 8300 has a quite old software version and i need to upgrade it since qtek says that they dont have new versions :| my rom version is 1.0.7.0
so i need a idiot proof guide to do this and a good room, i would prefer a rom without modifications, a default rom..
Many Thanks in advance..
Paulo F.
Login to qtek website, download the ROM, and install it, from the website, usually is one installer, just run it
hum.. that was the first thing i try..
problem is it says my imei is not from a brightpoint device.. so i'm not authorized.. the Portuguese's qtek says they don't have updates to me so i really need other way do do ir..
Hey
I Have A Uni (SPV M5000) WM5, G3,WWE
Im trying to upgrade to WM6,Ive tried Serveral utilities,and roms, but most come up with an error,
most common Error 150, And Error 112, and now i cant get the device out of Bootloader mode as well (V1.01)
Pls Pls Pls Pls Help
Im Desperate for WM6 On My Uni
Thanks
Dear Friend,
I had the same issue with my UNI after I install the Ranju 7.6.
FOR EVERYONE: DONT GO BACK AFTER YOU INSTALL RANJU 7.6 Because only solution to unbrick your UNI is to go through very complex method of MTTY.
Here is a link how to unbrick your UNI http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader.
Do step by step and will work. before that dawnload some ROM that has all included: Radio, Extended ROm and the CE ROM. (be carefull on your brand as well as).
Good luck
also, four letters: RTFW (Read The F Wiki)!
And read the Readme.txt-s included with your ROM, they have all the error codes, meanings, and possible solutions for them. For the first time, these Readmes really are worthwhile
Ok after doing all that was told to do to flash a G4 (which I did sucessfully) It does now show the SPL to be 2.21.olip.
At the end of the instructions says:
"After it is complete, your device will automatically reboot. The IPL version will be 2.21.0001 and the SPL will be 2.21.olip. If you see this then HardSPL was successfully flashed to your device.
Now you have HardSPL. You can flash any ROM using the RUU provided in the ROM package, should you have trouble with upgrading, try Mun's RUU."
I flashed my G4 Wizard with the new Diamond "clean" version. I think I want more bells and whisles; Question is...Do I have to do everything all over again or can I just flash with a new rom to a better OS?
I did try to flash to the Hyperdragon 6.1 and the SNN Diamond but, I think the OS I just flashed is too new to reflash to the others (error 264). (maybe I just answered my own question) But the HardSPL IS in there.
Someone please tell me what you think.
Thanks you!
Kim
Depending on my own experience you don't need to do hard SPL all over again. all you need to do is to do a good hard reset and try to update with nice and slow steps
i had a G4 before my current G3 and i know wht i'm telling you
just care to review these steps
- 50% battery or more (100% recommended)
this is a must .. cant flash without this condition
- laptop or pc with ups (you dont want to brick ur device cause electricity was out!) or you can risk and update on power supply
- use faria RUUs (they are the best) they can be used with any rom.
- connect the wizard to the pc after the hard reset (dont forget to backup) and follow the on screen (wizard not pc) till u get working windows mobile device
- when asked for setting ur device .. click escape (as said ... this device is guest till it has the WM that i want!)
- finally try it's right rom it's G4 safe if you ask, you'll find its link in my signature, also i suggest using radio 2.19
- last hint .. never use a rom with IPL or SPL. they will brick ur device (it did to mine )
any more help?
Okay guys,
I don't understand... I have a Wizard and I've been busting my head getting all the info and programs + roms and apps to upgrade my wizard to TNT Vanilla (with WM6.1).
This is the story, my wizard is ipl/spl 2.26. I currently have TNT 19199 / WM6 with radio 2.19... Works great! But get this, it's a G3 wizard!!!
Now as I was going through the screenshot tutorial to upgrade the wizard and I saw when I ran the wizard service tool, my pda was G3... So what do I do now??? Is it possible to upgrade my phone to a G4? some people said it was impossible to get wm6 on my phone, but I have it along with the tnt 19199...
I don't know if I should go ahead with anything until I find a solution. Help me out here guys.
Phil
G3 is great, you can flash any rom. G4, you couldn't flash if there was a radio or spl included. G4 is not an upgrade of a G3 and in fact is more likely especially with older roms to brick your phone.
I have a g3. and have been flashing every rom there is. it is more of a hassel to deal with g4. consider your sell lucky.
G3 and G4 is difference of DoC chip, that is a hardware difference and not changeable through software.
G3 devices can be CID-unlocked to accept any ROMs by just using unmodified RUU package.
For G4 devices, CID unlock is not possible, however you can use HardSPL to let the device accept ROMs not for your CID, as soon as the ROM does not contain IPL and SPL.
Well,you already are on wm6 with TNT 19199,why can't you upgrade to wm 6.1,yes!you can.
G3 device is much easier to upgrade than G4,count yourself lucky there
Vanilla Rom is just a plain rom without any Applications/programs or very few of them,its basically provided for cookers who want to cook their own roms with applications/programs of their choice,but it can be flashed to any device.
YeaH, BUT...?
That's just it!
You're all telling me it's ok to flash and ok to set new roms on my G3...
What I do not understand is why in the "Wizard Upgrade Guide and Tools-DCH" it's written that this upgrade is only for G4 phones only! Furthermore, I do not want to brick my phone either!
Maybe it's for this type of upgrade only...? In this case can one of you guys give me a link to upgrade that works???
Once I get the ok from you guys, I'll try to upgrade the TNT 19213 Pro or moderate edition. Seems like Vanilla really has nothing else than the basics...
Phil
P.s.- By the way, I keep on reading about UC included in these roms... That's a good thing right? I wonder exactly how it works...
When once you have already upgraded to wm6 TNT 19199 custom rom,did you get any problems,did your phone got Bricked,whats the problem now ?
I don't understand what exactly you are asking ?
Which "Wizard Upgrade Guide and Tools-DCH" you are referring to,in which its written that this rom is for G4 devices only ? Just take my words,there's no such specific G4 rom only,all the custom build wm6 or wm6.1 roms are build for both the devices,G3 and G4,coz they do not have IPL/SPL included in them,only those roms which have G3 IPL/SPL included in them are dangerous for G4 phones,even all the official Stock roms have IPL/SPL in it for both the devices,it can be flashed to either of the versions without any danger, Yes! if any rom which only have G3 IPL/SPL flashed to a G4 phone will Brick it ,or a Rom with specific G4 IPL/SPL,if flashed to a G3 will Brick it also.But those are all old Roms,Now all the latest custom build Roms are build without any IPL/SPL in them,they all are absolutely confirmed safe for both the devices,ok
oh my friend, I am sorry about that, I wrote that particular guide, and the instructions in the guide itself is only for G4 devices, the ROM that I mention in the guide and in the screenshots is just for example, it CAN be flashed to a G3. My particular device is a G4, so I wrote that guide from a G4 perspective. Sorry for the confusion!
ashasaur
Yeah ! right,thats nice of you to clarify the confusion,but I'll suggest,if you have not already rectified your guide,its better you rectify and clarify it in there too,so to avoid any further confusion and also clearly warn that its for G4 devices.
Cphil1
You shud have read the guide correctly,if you had,there wudn't be this confusion,Thats why its been emphasized over and again through the Forum,to read n read the guides to fully understand and only than proceed further,its for your own benefit.
Have a nice day !
That was weird!!! No Upgrade!
Hey guys,
The craziest thing just happened... I went through all the steps, upgraded the pda. I saw the status bar and the rom completed it's upgrade!
Then my phone turns back on and it's my old TNT rom...? So no upgrade at all! What happened? Did I miss a step?
Cphil1 said:
Hey guys,
The craziest thing just happened... I went through all the steps, upgraded the pda. I saw the status bar and the rom completed it's upgrade!
Then my phone turns back on and it's my old TNT rom...? So no upgrade at all! What happened? Did I miss a step?
Click to expand...
Click to collapse
sounds like your CID locked?
Try flashing the old button rom 1st then your carriers then the new rom. After which for new roms flash your carrier rom then any new rom. I find the amp 2.0 rom to be better then the tnt as in less buggy.
I bet you were using ShellTool when you upgrade to the old TNT ROM.
Now flash your original carrier ROM, then download IPL and SPL using button's ROM and perform full CID unlocking, then you can flash any ROM as you wish.
p.s. DON'T try to upgrade your IPL/SPL to 3.08 before full CID-unlocked!
Alright!
Okay guys,
I just got the update to work... It was simply that I ran the rom update setup from the tnt 19213 file.
The cut and paste indicated on the "Wizard Upgrade Guide and Tools-DCH" didn't work. Bottom line, I now have the new tnt Professional rom (No Touchflo!) on my phone with wm6.1! Now I'm very happy and very grateful
I also got pim backup to restore all my files and contacts. Great little tool! Now I have to start customizing it with all the nitty gritty...
I'm looking forward to some advice on stuff to add onto this rom. I'm more of a graphic and games fanatic, so I went along and downloaded the vanilla fun pack.
By the way, does anyone know how to add color to the clock and icons display on the home screen? It's a bit bland all in white...
Phil
Hi
I Buy 3days ago I-mate JAMin.
IPL 1.00
SPL 1.00.000
Image Version 1.0.9.1141.00
So first thing i read all posts about
upgrading to WM 6..........First Step was HardSPL G3 In stuck in withe screen and thats all...................So still my IPL 1.00 SPL 1.00.0000
ActiveSync works correctly.................So always when JAMin resets and coes to bootloader then after 10 second coming error 302 message.Afer soft reset it work again.
So I read many many posts for dummys and not dummys and i made i think 20-30 soft-hardreset download many many different roms.
Finaly i download original rom from I-mate homepage JAMin_WWE_ 2130923_21309112_020720_ship.exe still same problem stucks in bootloader and error 302.So then i read mtty1.42.exe can help but i didnt find how use this program i get it connected but there need write shomething?
And i read this post http://forum.xda-developers.com/showthread.php?t=353547 but PVtemp is not able download anymore.
So mabe somebody have idea.
In the moment i have installed Image Version 1.0.9.1141.00
And IPL 1.00 SPL 1.00.0000
What i did
1 Used 2 different computers
2 2 different cabels
3 Many different rom's
4 download original rom (also not work)
5 Many many times soft and hardreset
Used files
DiHardSPL G3rect_5_to_61_tool.zip
mtty1[1].42.zip (i dint find how use taht correctly)
JAMin_WWE_ 2130923_21309112_020720_ship.exe
Update_Package.zip
PDAMobiz_Prophet_WM6_V1[1].00_Step1.rar
etc
Sorry my bad english i hope you understand.
Regards Indrek
how to do
Safe proof plan do it like this.
1. First get the original Rom back and install it you can find the link on the forum.
2. Make a ROM update with the update Rom tool
3. Do hard SPL 3 or 4 usually its 3 after you syncronize with active sync.
4. Install the new Rom .
5. Wait for the device to start up.
Try the Mobiz Rom it worked in my case any questions feel free, bye.
the problem is i dont know how to do hard spl so can any one help me please am stuck and i have the same problem a white screen and nothing happins