Cant HardSPL and upgrade even with orig rom. - JAMin, XDA Neo, S200 Software Upgrading

Hi
I Buy 3days ago I-mate JAMin.
IPL 1.00
SPL 1.00.000
Image Version 1.0.9.1141.00
So first thing i read all posts about
upgrading to WM 6..........First Step was HardSPL G3 In stuck in withe screen and thats all...................So still my IPL 1.00 SPL 1.00.0000
ActiveSync works correctly.................So always when JAMin resets and coes to bootloader then after 10 second coming error 302 message.Afer soft reset it work again.
So I read many many posts for dummys and not dummys and i made i think 20-30 soft-hardreset download many many different roms.
Finaly i download original rom from I-mate homepage JAMin_WWE_ 2130923_21309112_020720_ship.exe still same problem stucks in bootloader and error 302.So then i read mtty1.42.exe can help but i didnt find how use this program i get it connected but there need write shomething?
And i read this post http://forum.xda-developers.com/showthread.php?t=353547 but PVtemp is not able download anymore.
So mabe somebody have idea.
In the moment i have installed Image Version 1.0.9.1141.00
And IPL 1.00 SPL 1.00.0000
What i did
1 Used 2 different computers
2 2 different cabels
3 Many different rom's
4 download original rom (also not work)
5 Many many times soft and hardreset
Used files
DiHardSPL G3rect_5_to_61_tool.zip
mtty1[1].42.zip (i dint find how use taht correctly)
JAMin_WWE_ 2130923_21309112_020720_ship.exe
Update_Package.zip
PDAMobiz_Prophet_WM6_V1[1].00_Step1.rar
etc
Sorry my bad english i hope you understand.
Regards Indrek

how to do
Safe proof plan do it like this.
1. First get the original Rom back and install it you can find the link on the forum.
2. Make a ROM update with the update Rom tool
3. Do hard SPL 3 or 4 usually its 3 after you syncronize with active sync.
4. Install the new Rom .
5. Wait for the device to start up.
Try the Mobiz Rom it worked in my case any questions feel free, bye.

the problem is i dont know how to do hard spl so can any one help me please am stuck and i have the same problem a white screen and nothing happins

Related

Rare problem with an upgrade

Hi,
I tried to upgrade my Qtek S200 with the newest ROM release from PdaMobiz (the 16M pooling page one), but encountered some problems...
It's a Portuguese TMN Qtek (or at least it displays the operator logo when started), although the software is in English.
IPL is 2.09 and SPL is 2.15...
However, after upgrading it, it kept displaying the Operator logo with IPL and SPL, and freezed, so it never worked. When I tried to revert it, I wasn't able to do it, because every time I try to install a different ROM (all of them for the G3 device) it just installs the new ROM, and then goes to that screen and freezes...
It never gave me any error during the upgrading/downgrading, because when it checks the version of the ROM, it displays no information, so it just says that is going to replace the inexistant version with the new one...
Is there a step a missed (I didn't put it in bootloader mode before doing the first upgrade, but I had already done that before with other ROMs and it worked fine...)?
Now I'm stuck without knowing if I should have done an unlock CID before upgrading it, or if there is another steped I missed... Please help me out...
Thanks in advance,
Nuno
Tried this?
Read this in one of the threads and it solved his problem:
Extract the rom file you are using to flash your phone, to a folder on your pc, than Extract the file i attached ("ROMUpdateUtility-NoVendorID.zip") into this folder. than connect your phone to pc and double click on "ROMUpdateUtility-NoVendorID.exe".
I personally have not tried it, but I downloaded the prog just in case, Hope it helps.
Now it gives me an error...
Hi,
Just tried what you advised, but now it jusk keeps giving me the error 208, which is supposed to happen because I have other programs open on my computer... Tried rebooting, closing most aplications with task manager, and still it doesn't work.
Also tried to downgrade to lower ROM upgrade, but it gives me the error that I can't downgrade, only upgrade...
When I upgrade it with AKU 2.3, it goes all the way through the upgrade, and then when it reboots, it just keeps giving me the operator logo screen with the version info on the display.
If I try to reboot to bootloader mode, I'm not able, the only way to do it is by removing the battery...
I'm probably still doing something I shouldn't... It should be able to work the downgrade utility...
Anyone can help?
Thanks,
Nuno
Try this rom:
ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
It shoud be ok.
If your prophet has spl end up with 2.xx.0001 check at
ftp://xda:[email protected]/Uploads/Prophet/
find out the rom which can solve for SPL 2.xx.0001.
Good luck
Thanks Chan! Problem solved!
I was starting to review all my steps ir order to see what I could have done wrong...
Would you advise me to upgrade now to the PDAMobiz latest ROM (the one with the biggest pooling page)?
Thanks again.
Nuno
1. Unlock cid
Since your prophet spl is 2.15, you have to follow this step.
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=437
From file you can get from ftp://xda:[email protected]/Uploads/Prophet/
Your PC has to connect to network or internet (to have ip address), becuase in that script use ping command for delay 4 seconds.
It's just downgrade and unlock cid.
You may verify if cid unlocked, by backup rom to sd card. (use romupdate.exe with r2sd all command, check at wiki)
2. Upgrade to official rom
ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
3. Upgade to pdamobiz, I suggest you to upgrade 12 Mb pagepool version. (even 8 mb version is ok). Because 16 mb has smallest ram space.
Good luck
All solved!
Again,
Thank you very much for your help!
After some tries, upgrading, downgrading, upgrading again, etc, I finally got it, so now its running the PDAMobiz version, which by the way, seems great so far!
Next time I'll come to you directly and then try to make things on my own...
Thanks again!
Nuno Eça

After the HardSPL...

Ok after doing all that was told to do to flash a G4 (which I did sucessfully) It does now show the SPL to be 2.21.olip.
At the end of the instructions says:
"After it is complete, your device will automatically reboot. The IPL version will be 2.21.0001 and the SPL will be 2.21.olip. If you see this then HardSPL was successfully flashed to your device.
Now you have HardSPL. You can flash any ROM using the RUU provided in the ROM package, should you have trouble with upgrading, try Mun's RUU."
I flashed my G4 Wizard with the new Diamond "clean" version. I think I want more bells and whisles; Question is...Do I have to do everything all over again or can I just flash with a new rom to a better OS?
I did try to flash to the Hyperdragon 6.1 and the SNN Diamond but, I think the OS I just flashed is too new to reflash to the others (error 264). (maybe I just answered my own question) But the HardSPL IS in there.
Someone please tell me what you think.
Thanks you!
Kim
Depending on my own experience you don't need to do hard SPL all over again. all you need to do is to do a good hard reset and try to update with nice and slow steps
i had a G4 before my current G3 and i know wht i'm telling you
just care to review these steps
- 50% battery or more (100% recommended)
this is a must .. cant flash without this condition
- laptop or pc with ups (you dont want to brick ur device cause electricity was out!) or you can risk and update on power supply
- use faria RUUs (they are the best) they can be used with any rom.
- connect the wizard to the pc after the hard reset (dont forget to backup) and follow the on screen (wizard not pc) till u get working windows mobile device
- when asked for setting ur device .. click escape (as said ... this device is guest till it has the WM that i want!)
- finally try it's right rom it's G4 safe if you ask, you'll find its link in my signature, also i suggest using radio 2.19
- last hint .. never use a rom with IPL or SPL. they will brick ur device (it did to mine )
any more help?

Having big problems please help!!!!!

Hello, I have a HTC TyTn, and I am trying to upgrade it from wm 5.0 to wm 6.0, I have followed all the instructions, but it still dosent work, I think the problem is, that I dont have SPL-1.11, I have a lower one, PLEASE HELP ME!
This contains a lot of guides for Hermes:
http://forum.xda-developers.com/showthread.php?t=299462
This is a hard-spl thread by olipro.. you can follow the instructions there.
http://forum.xda-developers.com/showthread.php?t=296722
Thanks,Ill have a look!
if it is an official rom you won't need hard spl (just a heads up to save some time flashing)
It is original, but the htc eclub, dosent have any more upgrades for the htc tytn.
I did everything, but then it showed me
ERROR (260) : Update Error
The Update Utillity cannot connect to your PDA phone!
BUT MY PHONE WAS CONNECTED TO USB!!!!
PLEASE HELP ASAP!
When the multi tri thing appears, it shows
HERM200
IPL-SSPL by Des
HERM200
SPL-1.07.ds
WHATS WRONG?

Facts about version 2.03TX and bootloader

I have two magicians, and I read many posts about nonchangeable version 2.03TX.
I test it, and upgrade one unit. After upgrade really is not possible change any (OS or bootloader). Bootloader cant vrite itself or OS memory. I try all known techniques - SDboot, TTY (lnb, s2d d2s...) via USB, and standart os upgrade via PC (of cours, noID too).
So I have two magicians, then i use good tool from "itsme" called pmemdump.exe (thank you for your good job) and download OS images and bootloader images from my magicians. The reason is:
I dont say when, and/or why, but in some magiciansThe 2.03TX destroy bootloader!!
In my flashed magician is destroyed (nulled) area from 0x10000 to 0x10080.
I attach good (before upgrade) and destroyed (after upgrade) bootloader for comparsion
Maybee if "itsme" (or anybody other? ) create new version of pnewbootloader.exe compatible with version 2.03TX (because under this version OS it not working) then tens of magicians with flashed 2.03TX will be upgradeable again . (I can send any dump if it will be need, or try apply new version on my magicians).
hi mate, i 've had installed 2.03tx and 1.13 radio on my qtek s100 for about one year...
i've had no problem in downgrading radio to 1.12 and flashing device with cotulla rom,
the only problem is that cotulla rom does not support samsung touchscreen
my bootloader is 1.02
the only trick to update i've used is to keep activesync loaded with "allow usb connection" unchecked in settings. then it worked like a charm...
I try it too with unchecked "allow USB connection" in AS (and i have XP). By me (and many others) the problem is owerwrited bootloader. You can see attached files and compare it, you will be see...
You are right, many problems with flashing is between chair and keyboard But not now.
You have the same version of bootloader like me, then probably in version of bootloader its not. I have originally T-mobile MDA compact.
Can you send me dump of your bootloader for compare?
Sorry for my bad english, i am from Czech.
yes mate no problem, link me to a guide for bootloader dumping, i've nevere done it...
ps: good luck for yours magician
Hi Shelver,
I have 2.03TX in only one magician. The second unit is powered by Cotulla WWE_03 now
Download and unzip this: http://www.nah6.com/~itsme/itsutilsbin-20090515.zip
Connect and synchronize via AS your magician, stay connected (this util working via Active Sync) and in comand line (IN win XP of course, in vista its not guaranted) go to your unzipped directory and write this (without commas):
"pmemdump 0x80000000 0x00040000 boot.bin"
and wait few seconds to done.
It read flash from address 0x80000000 to 0x80040000 (lenght 0x40000) and store dump to file "boot.bin" Its bootloader area. Then you can send me it, compare with my posted bootloaders...
shelver said:
hi mate, i 've had installed 2.03tx and 1.13 radio on my qtek s100 for about one year...
i've had no problem in downgrading radio to 1.12 and flashing device with cotulla rom,
the only problem is that cotulla rom does not support samsung touchscreen
my bootloader is 1.02
the only trick to update i've used is to keep activesync loaded with "allow usb connection" unchecked in settings. then it worked like a charm...
Click to expand...
Click to collapse
Me 2, upgraded from tx203 to Cotulla's rom and back for some SMS backup and then upgraded to Cotulla's rom again.
I think I can go as many times as I wish with my magician.
philiplam said:
Me 2, upgraded from tx203 to Cotulla's rom and back for some SMS backup and then upgraded to Cotulla's rom again.
I think I can go as many times as I wish with my magician.
Click to expand...
Click to collapse
You are lucky man I try it only one time, and bootloader is broken.
I have magicians only as toys, then, if it will be problem for me, then i repair bootloader via JTAG I only try 2.03TX, and try search some help for unlucky mans, who havent JTAG Now i have one broken, and one OK. But with Samsung LCD R3 . Maybee, i change display, or upgrade it to 128MB RAM for try _R1
I am HW developer, so HW problems is easy for me I create car multimedia PC on OMAP3530 platform now for my friends. Its better toy for me, magician is lovely history Only SW is hard to write to me
hi certik, my magician is still with cotulla rom and doesn't boot because of touchscreen driver,i've not flashed it again because of i don't use it.
i'm waiting a new rom,
however when flashed i'll send you my bootloader backup
shelver said:
hi certik, my magician is still with cotulla rom and doesn't boot because of touchscreen driver,i've not flashed it again because of i don't use it.
i'm waiting a new rom,
however when flashed i'll send you my bootloader backup
Click to expand...
Click to collapse
OK, Ill wait. I dont need it really, i have stored good copy of bootloader, i need it only for compare
And if you wish, you can flash cotulla WWE_03 ROM (you can directly from _04 to _03 say Cotulla) In this version touchscreen driver worked fine.
e-certik said:
OK, Ill wait. I dont need it really, i have stored good copy of bootloader, i need it only for compare
And if you wish, you can flash cotulla WWE_03 ROM (you can directly from _04 to _03 say Cotulla) In this version touchscreen driver worked fine.
Click to expand...
Click to collapse
humm, ok mate, just the time to flash it with WWE_03 ROM then
hi mate, done, here is my bootloader
ps:touchscreen is now ok, thanks
Hey, you are fast
Thanks for bootloader, its the same as my original bootloader
good luck mate
e-certik said:
I have two magicians, and I read many posts about nonchangeable version 2.03TX.
I test it, and upgrade one unit. After upgrade really is not possible change any (OS or bootloader). Bootloader cant vrite itself or OS memory. I try all known techniques - SDboot, TTY (lnb, s2d d2s...) via USB, and standart os upgrade via PC (of cours, noID too).
So I have two magicians, then i use good tool from "itsme" called pmemdump.exe (thank you for your good job) and download OS images and bootloader images from my magicians. The reason is:
I dont say when, and/or why, but in some magiciansThe 2.03TX destroy bootloader!!
In my flashed magician is destroyed (nulled) area from 0x10000 to 0x10080.
I attach good (before upgrade) and destroyed (after upgrade) bootloader for comparsion
Maybee if "itsme" (or anybody other? ) create new version of pnewbootloader.exe compatible with version 2.03TX (because under this version OS it not working) then tens of magicians with flashed 2.03TX will be upgradeable again . (I can send any dump if it will be need, or try apply new version on my magicians).
Click to expand...
Click to collapse
as you i still have a hope to fix my poor magician
any kind programer can do what you have said will make me and many other happy again
i have the hope

WinMo 5 To WM6.5_23635_Babak00000_Prophet

Hi,
Noob here.
I have just discovered this site and have spent the last couple of hours wiki-ing my way through the flashing process. However I have several questions that I couldn't find answers for.
1) I wish to upgrade my WM5 G4 prophet to WM6.5_23635 by Babak00000.
Can I upgrade from WM5 to 6.5 or do I need to go to 6.1 and then up to 6.5?
2) Do I need to CID unlock if my phone isn't locked to a carrier?
If someone could outline the programs (in order) and maybe the process to go from WM5 to 6.5 that would be great.
Thanks in advance.
Hello There!
I'm also quite new to this, but i have managed to install wm6.5 so i think i can help you!
1. No! I am pretty shure you can upgrade from the original rom to any other ROM you want without any steps in between!
2. I have not done any CID unlock and everythin worked fine!
... The Process is actually very easy! I took a ROM from bikertibi but I also downloaded one of babak00000 and it has the same filestructure... just execute the "prophet_upgrade.exe", then select G3 or G4 (DONT mess this up) and if you have Vista or W7 just check the Vista Checkbox, and please check the HardSPL!
Now press start and you don't have to do anymore than clicking "next" all the time
It's that easy
... I hope I didn't tell any bull****, but this is how it worked for me!! Good Luck!!!
Yeah, that's exactly how it worked on my S200, too
Problem with WM6.5_23113_WWE_Premium_Prophet_Babak
Hello everybody,
I just download this file, yesterdayWM6.5_23113_WWE_Premium_Prophet_Babak, to my PC and began upgrading work to my Qtek S200. I try several time, not sucessfully. Finally, the screen appear in 3 colors with text " IPL 2.20.0001"and "SPL 2.20.0001". I tried hard-reset and it said sucessful format, but it does not work. I copy my friend downgrade file but it said no connection with PC.
Does anyone have the same problem and could anyone kindly help me for this?
Thank you in advance
you need to hard spl 1st.if your pc is vista or win 7,upgrade your driver before flashing.read from here
http://forum.xda-developers.com/showthread.php?t=485293
hi
i had the same problem do this step by step
charge your battery through external charger to full (ur phone is in usb mode so itwont be charged)
DONT MESS THIS PART
download aku 2.2 g3 if your device is g3(aku 2.24 if it is g4)
uncheck the usb connection in active sync
then run the aku in your pc
it should work
if you want to flash any rom check the usb connection in active sync and flash it (read the steps on flashing screen)
hope it should work

Categories

Resources