Hi all
Is it possible to use a wizard rom on a Prophet ?
I want a Danish rom for my Prophet, and it is impossible to get.
For the wizard there is several Danish rom here.
The processor and most hardware should be the same on those two devices (exept keyboard of course), so why don't use a Wizard rom on a Prophet.
If it is impossible to do this, can I edit the rom in a Prophet and make the translation my self in the rom ? Is there anybody that can guide me in the right direction ?
Best regards
Kina500
DO NOT Try this, you might BRICK your device.....
Hardware are same to some degree but not exactly..
Hi again
Is there somebody who can guideline me translate the english firmware ?
BR
Kina500
Hi,
After some searching i got a little experience in upgrading my Neo by reading/following the tutorial by Risidoro in Wizard Forum.
(U can search for--'How-to install any 2.x ROM in a CID-Locked G3 or G4 Wizard.')
With this info/tools i tryied many combination of OS,GSM,EXTRom,HTC and Splash except ipl/spl (as of now i dont want to touch and stuck in it and even i dont know whether my Neo is unlocked or not. my ipl/spl: 2.15.0001) successfully.
I suggest every confusing newbee to follow that tutorial and do upgrade but do not touch ipl/spl they dont want a brick.
At present im happy with Jesterz-r1 rom, however i exluded spl part from his rom.
To top the enthu, i decided to install the Wizard Rom on my Prophet, i just use Risidoro's RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4.exe for Wizard and excluded ipl/spl as usual, reform nk.nbf file and used Prophet's RUU
to flash this rom. It completed full installation successfully, device restarted successfully up to HTC logo and after that Bootloader started and could not proceed further.
It was sad to come back to Jesterz-r1 rom now again.
Failure might be because of conflict btwn my maintained ipl/spl(2.15.0001) with OS rom of Wizard
Im guessing it,
as HTC Logo appeared due to ipl
and spl could not proceed( may be wizard os rom require higher spl)
Whetever happen, it was a enjoying process.May someone get success in future.
desbloquear Qtek s200
boas gostaria de saber como e q poderei desbloquear um qtek s200. cumprimentos
I am a new owner of SPV M5000..It is my first time upgrading my unit and I have decided to use Jwrightmcps Crossbow ROM Update 2.02.02 WWE rom because it is receiving lots of positive feedbacks..I have already downloaded the rom for M5000..What should I do next?Do I just need to click the .exe file or what?Or if there is any other rom that you could recommend,tell me please...
WM5 or WM6?
Thanks a lot guys
it depends on what do you want to do with your device.
if you need a very stable ROM, and a Wifi, Email, Bluetooth etc. working, then you should upgrade to the last version of WM5. for this you must go in the "Universal Upgrading" forum.
WM6 is much faster, but sometimes there are problems with bluetooth handsfree, and with the wifi (you cannot access some specific pages, but you can access other) and with others.
whatever you choose, keep in mind that upgrading your SPV can be dangerous if you don't fallow all the steps.
First of all, be patient and read the Wiki http://wiki.xda-developers.com/. A lot of things are explained there.
After that, read as much threads as possible. Always read the threads of the ROMs you want to install. you will find out all the potential problems with the ROMs and you might decide to use a different ROM.
Keep in mind that you will loose the waranty of the device by performing an ROM upgrade.
1
the first thing you must do, is to upgrade the bootloader.
for this, go here: http://wiki.xda-developers.com/index.php?pagename=Universal_Bootloader
2
the second thing you must do, is to unlock your device. in this way you will be able to use different SIM cards, not only Orange ones. you will be able to use T-Mobile, O2 etc.
it is important to remove your SIM Lock before going any furthere.
for this you must go here: http://wiki.xda-developers.com/index.php?pagename=Uni_Simlock_by_Buzz_and_team
3
after the SIM unlock, you will have a Radio version 0.00.00
you need to upgrade your Radio. the latest Radio is 1.15.00
for this you must go here:http://wiki.xda-developers.com/index.php?pagename=UNI_Radio
you can download the Radio from here: http://rs45.rapidshare.com/files/21256271/11500_Radio_only.rar
4
with your new radio 1.15.00 you must upgrade the bootloader again.
so again go here and repeat all the steps: http://wiki.xda-developers.com/index.php?pagename=Universal_Bootloader
5
now you can upgrade the ROM. to do that, download what ROM you prefere and then go here: http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
i advice you not to hurry and upgrade your M5000. spend more time on the forum, read the whole Wiki http://wiki.xda-developers.com/ and learn more about your device. probably you still don't know how to enter in bootloader, how to hardreset your device, what to do if you get stucked in bootloader mode etc.
meny people brick their devices. for example, if you unplug your device during ROM upgrading, you will no longer be able to use the device. it will be gone for ever.
don't hurry to upgrade. there are meny meny things to find out about your M5000.
good luck !!!
thanks
I just did the upgrade without upgrading my BL and radio version..Everything went fine...I am a happy user now of WM6 on my M5000..
Thanks a lot
hello,
I recently upgraded to the lastet ROM (2.15.13.27 wwe).however a certain application won't work properly after the upgrade.Since this app is important to me,I am thinking of reverting back to the old ROM.I tried searching at dopodasia but couln't find any.Could someone please tell me where I can find an archive of old ROM for the Dopod 818pro.
go register here & u can dload the roms
http://www.dopodasia.com/Dopod_en/member/login.aspx
I have two magicians, and I read many posts about nonchangeable version 2.03TX.
I test it, and upgrade one unit. After upgrade really is not possible change any (OS or bootloader). Bootloader cant vrite itself or OS memory. I try all known techniques - SDboot, TTY (lnb, s2d d2s...) via USB, and standart os upgrade via PC (of cours, noID too).
So I have two magicians, then i use good tool from "itsme" called pmemdump.exe (thank you for your good job) and download OS images and bootloader images from my magicians. The reason is:
I dont say when, and/or why, but in some magiciansThe 2.03TX destroy bootloader!!
In my flashed magician is destroyed (nulled) area from 0x10000 to 0x10080.
I attach good (before upgrade) and destroyed (after upgrade) bootloader for comparsion
Maybee if "itsme" (or anybody other? ) create new version of pnewbootloader.exe compatible with version 2.03TX (because under this version OS it not working) then tens of magicians with flashed 2.03TX will be upgradeable again . (I can send any dump if it will be need, or try apply new version on my magicians).
hi mate, i 've had installed 2.03tx and 1.13 radio on my qtek s100 for about one year...
i've had no problem in downgrading radio to 1.12 and flashing device with cotulla rom,
the only problem is that cotulla rom does not support samsung touchscreen
my bootloader is 1.02
the only trick to update i've used is to keep activesync loaded with "allow usb connection" unchecked in settings. then it worked like a charm...
I try it too with unchecked "allow USB connection" in AS (and i have XP). By me (and many others) the problem is owerwrited bootloader. You can see attached files and compare it, you will be see...
You are right, many problems with flashing is between chair and keyboard But not now.
You have the same version of bootloader like me, then probably in version of bootloader its not. I have originally T-mobile MDA compact.
Can you send me dump of your bootloader for compare?
Sorry for my bad english, i am from Czech.
yes mate no problem, link me to a guide for bootloader dumping, i've nevere done it...
ps: good luck for yours magician
Hi Shelver,
I have 2.03TX in only one magician. The second unit is powered by Cotulla WWE_03 now
Download and unzip this: http://www.nah6.com/~itsme/itsutilsbin-20090515.zip
Connect and synchronize via AS your magician, stay connected (this util working via Active Sync) and in comand line (IN win XP of course, in vista its not guaranted) go to your unzipped directory and write this (without commas):
"pmemdump 0x80000000 0x00040000 boot.bin"
and wait few seconds to done.
It read flash from address 0x80000000 to 0x80040000 (lenght 0x40000) and store dump to file "boot.bin" Its bootloader area. Then you can send me it, compare with my posted bootloaders...
shelver said:
hi mate, i 've had installed 2.03tx and 1.13 radio on my qtek s100 for about one year...
i've had no problem in downgrading radio to 1.12 and flashing device with cotulla rom,
the only problem is that cotulla rom does not support samsung touchscreen
my bootloader is 1.02
the only trick to update i've used is to keep activesync loaded with "allow usb connection" unchecked in settings. then it worked like a charm...
Click to expand...
Click to collapse
Me 2, upgraded from tx203 to Cotulla's rom and back for some SMS backup and then upgraded to Cotulla's rom again.
I think I can go as many times as I wish with my magician.
philiplam said:
Me 2, upgraded from tx203 to Cotulla's rom and back for some SMS backup and then upgraded to Cotulla's rom again.
I think I can go as many times as I wish with my magician.
Click to expand...
Click to collapse
You are lucky man I try it only one time, and bootloader is broken.
I have magicians only as toys, then, if it will be problem for me, then i repair bootloader via JTAG I only try 2.03TX, and try search some help for unlucky mans, who havent JTAG Now i have one broken, and one OK. But with Samsung LCD R3 . Maybee, i change display, or upgrade it to 128MB RAM for try _R1
I am HW developer, so HW problems is easy for me I create car multimedia PC on OMAP3530 platform now for my friends. Its better toy for me, magician is lovely history Only SW is hard to write to me
hi certik, my magician is still with cotulla rom and doesn't boot because of touchscreen driver,i've not flashed it again because of i don't use it.
i'm waiting a new rom,
however when flashed i'll send you my bootloader backup
shelver said:
hi certik, my magician is still with cotulla rom and doesn't boot because of touchscreen driver,i've not flashed it again because of i don't use it.
i'm waiting a new rom,
however when flashed i'll send you my bootloader backup
Click to expand...
Click to collapse
OK, Ill wait. I dont need it really, i have stored good copy of bootloader, i need it only for compare
And if you wish, you can flash cotulla WWE_03 ROM (you can directly from _04 to _03 say Cotulla) In this version touchscreen driver worked fine.
e-certik said:
OK, Ill wait. I dont need it really, i have stored good copy of bootloader, i need it only for compare
And if you wish, you can flash cotulla WWE_03 ROM (you can directly from _04 to _03 say Cotulla) In this version touchscreen driver worked fine.
Click to expand...
Click to collapse
humm, ok mate, just the time to flash it with WWE_03 ROM then
hi mate, done, here is my bootloader
ps:touchscreen is now ok, thanks
Hey, you are fast
Thanks for bootloader, its the same as my original bootloader
good luck mate
e-certik said:
I have two magicians, and I read many posts about nonchangeable version 2.03TX.
I test it, and upgrade one unit. After upgrade really is not possible change any (OS or bootloader). Bootloader cant vrite itself or OS memory. I try all known techniques - SDboot, TTY (lnb, s2d d2s...) via USB, and standart os upgrade via PC (of cours, noID too).
So I have two magicians, then i use good tool from "itsme" called pmemdump.exe (thank you for your good job) and download OS images and bootloader images from my magicians. The reason is:
I dont say when, and/or why, but in some magiciansThe 2.03TX destroy bootloader!!
In my flashed magician is destroyed (nulled) area from 0x10000 to 0x10080.
I attach good (before upgrade) and destroyed (after upgrade) bootloader for comparsion
Maybee if "itsme" (or anybody other? ) create new version of pnewbootloader.exe compatible with version 2.03TX (because under this version OS it not working) then tens of magicians with flashed 2.03TX will be upgradeable again . (I can send any dump if it will be need, or try apply new version on my magicians).
Click to expand...
Click to collapse
as you i still have a hope to fix my poor magician
any kind programer can do what you have said will make me and many other happy again
i have the hope
Hi!
A have a strange problem with my HD2. I've installed that (http://forum.xda-developers.com/showthread.php?t=953078) firmware after HD2_Updatable_XBmod_Yuki_v1.zip firmware. So I made it because of language (wnted to have my native russian lang ) After some time I decided to go bach to win 6.5 and I couldn't!
First of all when I'm trying to instal the original firmware it writes me Invalid model ID (244) I think that it could be because of name change in firmware, but the instructions say that this version of WP can be easely removed by Original Rom...
Than I couldn't reinstall magldr 13 the same problem with the model...
Please help! I've already tried everything that I could... All possible Roms... even the same Rom... and it writes me some mistakes.
The installed WP7 works... without SDcard...
May be someone knows what is the problem of that case? Please help (I'm a new one here so I can't write messages in the mentioned forum link)
I have the same.