Hello all,
when I flash my Swisscom S200 with bad ROM (any K-JAM rom), I got to IPL 2.16.0001 and SPL 2.16.0001. Can somebody tell me, which version ROM is right for REPAIR it? When I flashing with any ROM from XDA-FTP, this action stopped on 95% and I receive INVALID COMMAND error #326.
Thanks for your help and sorry for my English.
I have the same problem, but my s200 has IPL and SPL 2.18.0001 after wrong ROM.
After 95% error I have flashed it using radio GSM 2.20.21.exe and now it is ok, but only with external power. (Using the battery the phone only blinking) As I understand I must use correct SPL, but is it possible to downgrade it???
Please help me to alive my QTEK!!!!
First, try to put a ROM no vendor id, probably you can fix it.
The problem you mentioned sounds not good. I think you must drive to fix it on a technical store.
Related
Hi,
I have upgraded my dopod rom using this file RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe from the xda developers ftp.
After upgrading I found that the version number is incorrect
IPL 1.00
SPL 2.15.0000
I have tried reflashing with the same rom several time but the version number for IPL remains the same.
How can I upgrade the IPL correctly?
Where can I find the upgrade for IPL/SPL 2.15.0001?
I cannot flash my dopod 818 pro ROM...it said that I have wrong type of device :?: :?: :?: :?:
Did you guys CID unlock first?
Hi it appears that I have made the same mistake.
How d we recover?
Mike
The rom I flash last time for my O2 XDA neo was RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID. No CID unlocking is neccesary, and the procedure of flashing is as easy as installing a software.
You don't need .0001
AFAIK, the number depends of G3 or G4 mainborad hardware version. .0000 means that you have G3. Let it be, and don't touch if it works well.
I also have the same problem. My IPL seems 1.00 and I'm looking for the 2.15.0001.
I'm totally sure I have the device CID unlock, why? I can Install ROM from i-mate, Qtek and Dopod.
I tryed many days, many hours nad still working.
Please give me a help, a hand, please. Thank you in advance.
I have an CHARMER PM200.
Its version was 2.xx.xxx.
Customer give that phone to some one to unlock.. and that person kill this phone..
Now its only SHOW three color screen and
IPL 2.06
SPL 2.15.0001
..
I tried to write ROM with T-Mobile RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship
But it give me error.
ERROR {296} : UPGRADE ONLY
This NBF file cannot be used for your PDA phone. please get new NBF file.
When I use JAFWM to flash above file its flash 100% but problem still same.
anyone know.. how I can revive this phone..
Br.
DrMobile
Also tried to flash ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
But at 80% I get error..
ERROR [326] : INVALID COMMAND
This file cannot be used for your PDA Phone. Please check your NBF file
I had the same problem with my JAMin. I messed up trying to flash it with a home-made ROM and the tool used to build the ROM put two G4 SPLs instead of one G3 and one G4. This caused my G3 JAMin to have a G4 SPL. It wouldn't boot past the "rainbow screen" and the IPL and SPL levels were similar to what you have now.
The solution for me was to have it repaired under warranty :roll:
My charmer is still under problem.
Actually problem is that.. My phone is G3 chipset.. but someone flashed it with G4 flash files.
and Its spl and ipl is 2.xx.xxx and phone is detect as G4 chipset.. but phone is G3..
NOW ANYONE can guide me how I can write G3 Ipl/spl
waiting.
DrMobile said:
My charmer is still under problem.
Actually problem is that.. My phone is G3 chipset.. but someone flashed it with G4 flash files.
and Its spl and ipl is 2.xx.xxx and phone is detect as G4 chipset.. but phone is G3..
NOW ANYONE can guide me how I can write G3 Ipl/spl
waiting.
Click to expand...
Click to collapse
As I mentioned my JAMin was repaired under warranty. When it was returned to me they had replaced the main board. So it seems to be quite a problem to re-write the SPL if it has been flashed with the wrong type.
The new board has the G4 flash memory, so no more unlocking/downgrading adventures for me
DrMobile said:
I have an CHARMER PM200.
Its version was 2.xx.xxx.
Customer give that phone to some one to unlock.. and that person kill this phone..
Now its only SHOW three color screen and
IPL 2.06
SPL 2.15.0001
..
I tried to write ROM with T-Mobile RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship
But it give me error.
ERROR {296} : UPGRADE ONLY
This NBF file cannot be used for your PDA phone. please get new NBF file.
When I use JAFWM to flash above file its flash 100% but problem still same.
anyone know.. how I can revive this phone..
Br.
DrMobile
Click to expand...
Click to collapse
Extract the RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship to a folder on your pc, than Extract the file i attached ("ROMUpdateUtility_Wizard_NoID.exe") into this folder. than connect your charmer to pc and double click on "ROMUpdateUtility_Wizard_NoID.exe".
cross your fingers.
shayd said:
Extract the RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship to a folder on your pc, than Extract the file i attached ("ROMUpdateUtility_Wizard_NoID.exe") into this folder. than connect your charmer to pc and double click on "ROMUpdateUtility_Wizard_NoID.exe".
cross your fingers.
Click to expand...
Click to collapse
I allready tested your solution long time ago.. but its not working...
Br.
DrMobile said:
I allready tested your solution long time ago.. but its not working...
Br.
Click to expand...
Click to collapse
Have you tried to flash it with "RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" ? maybe this one wil work
DrMobile said:
I have an CHARMER PM200.
Its version was 2.xx.xxx.
Customer give that phone to some one to unlock.. and that person kill this phone..
Now its only SHOW three color screen and
IPL 2.06
SPL 2.15.0001
..
I tried to write ROM with T-Mobile RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship
But it give me error.
ERROR {296} : UPGRADE ONLY
This NBF file cannot be used for your PDA phone. please get new NBF file.
When I use JAFWM to flash above file its flash 100% but problem still same.
anyone know.. how I can revive this phone..
Br.
DrMobile
Click to expand...
Click to collapse
Dear DrMobile,
I am facing the exact same problem like you.
Same Model, Same IPL/SPL & same events.
Its like I wrote all this.
Its my request as whenever you find ANY SOLUTION, please please please do let me KNOW.
Waiting.......
Thanks in advance.
DoCtOr_X...
shayd said:
Have you tried to flash it with "RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" ? maybe this one wil work
Click to expand...
Click to collapse
Hi,
Yes You may be right, we need a ROM with only G3 IPL/SPL or only G3 SPL and if we can force this G3 SPL (I think JAFWM can do it but not sure) into the phone the problem will be solved.
But Question is where can we find this "RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" as it is not available on net, the file on FTP is corrupt.
"RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship" have both G3 & G4 IPL/SPL and when we write this ROM into phone it writes G4 IPL/SPL as Phone is detected having G4 by every software.
Otherwise the only option left is "JTAG" but only one guy (ARC but he lives in Russia) know the test points for Charmer.
I solved this problem before using JAFWM dongle
just uncheck skip ipl/spl and try flash
it will flash ur mobile with the correct IPL and SPL
mak_us1977 said:
I solved this problem before using JAFWM dongle
just uncheck skip ipl/spl and try flash
it will flash ur mobile with the correct IPL and SPL
Click to expand...
Click to collapse
Thanks for your Quick Reply, please tell us as which ROM version & which JAFWM version you used.
Thanks
i used rom JAMin_WWE_213923_2139123_022021 and JAFWM ver 2.2g
Thanks Man,
can u please confirm me that you had same problem of G4 SPl on G3 DOC.
Because JAFWM detects my phone as G4 DOC and the ROM you mentioned has both G3 & G4 SPL so I think It will try to write G4 SPL not G3.
sorry for the mentioned rom
this one not for charmer
just detect ur phone in JAFWM , chose the nk file for ur charmer , uncheck skip ipl/spl then flash
in that way i think ur mobile will be revived again
Can Any GURU Out There Help Us????????????
Just a SOS Messsage.
Can anyone out there help us out. Just wanted to write G3 SPL back to G3 Device (which is mistakenly written by G4 SPL)
Details
HTC Charmer (PM200) MSystem G3 DOC
IPL 2.06
SPL 2.15.0001 (its PM300 G4 SPL)
Device can enter bootloader and connect with USB. (means its not a brick yet)
Please Help.............................................
Will appreciate any kind of helpful suggestion, discussion.
Thanks
DoCtOr_X said:
Just a SOS Messsage.
Can anyone out there help us out. Just wanted to write G3 SPL back to G3 Device (which is mistakenly written by G4 SPL)
Details
HTC Charmer (PM200) MSystem G3 DOC
IPL 2.06
SPL 2.15.0001 (its PM300 G4 SPL)
Device can enter bootloader and connect with USB. (means its not a brick yet)
Please Help.............................................
Will appreciate any kind of helpful suggestion, discussion.
Thanks
Click to expand...
Click to collapse
have you tried to flash it with "RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship"???
i have uploaded it to here: http://savefile.com/files/157293
Thanks Shayd
First of all Thank u very very much as I was not hoping to get such favour from any one so Thank You Again.
Yes I did give it a try, its not working with the message that "please get a new NBF"
I hope someday I may be able to use my Charmer Again.............
JAFWM (whatever this is) is not working (as mak_us1977 mentioned)?
BTW, how do you know if your machine is G3 or G4? By looking if your unit is P200 or P300? And to confirm,
SPL 2.06.0001 only works on G3?
SPL 2.15.0001 only works on G4?
Want to put this on the Wiki to avoid future similar problems
Just Want to Know if U had SPL 2.xx.0001
mak_us1977 said:
sorry for the mentioned rom
this one not for charmer
just detect ur phone in JAFWM , chose the nk file for ur charmer , uncheck skip ipl/spl then flash
in that way i think ur mobile will be revived again
Click to expand...
Click to collapse
Dear mak....
Please let me know if you had SPL 2.xx.0001
This SPL is NASTY.
After instaling the ROM in the link:
Prophet AKU2.3 pdamobiz customized rom [G4 with SPL 2.15.0001]
I don't mind this being WWE instead than Spanish, but I got several problems:
Hang during install after first reboot. (after every Hard Reset)
Not all programs installed.
Not all installed programs running.
Some other minor glitches.
I moved from 2.15 ESP Rom (Vodafone) wich I was unable to extract.
Does anyone knows were to find my "old" rom?
I downloaded 2.13 from imateclub but refuses to install: "this nbf file is not for your device, get a newer one".
Help! please.
First, is your CID unlock?
Second, your device have a G4 chip, so you can not be able to install an older version, I mean, If you have a 2.15.0001 you can not be able to install a Rom for a Sapnish Qtek 2.09.0000 or like JAMin by i-mate 2.13.0000.
About where you can find your original rom, I invite you to find it on XDA-Wiki, after you log in under your nick or make a Dump Rom from other device like yours.
cidriver said:
First, is your CID unlock?
Second, your device have a G4 chip, so you can not be able to install an older version, I mean, If you have a 2.15.0001 you can not be able to install a Rom for a Sapnish Qtek 2.09.0000 or like JAMin by i-mate 2.13.0000.
About where you can find your original rom, I invite you to find it on XDA-Wiki, after you log in under your nick or make a Dump Rom from other device like yours.
Click to expand...
Click to collapse
Thanks for your answer!
I'm unsure if this is CID unlocked, it is SIM unlocked now, will check for the CID issue. Though I assume that being able to install other 2.15 rom (dopòd) means it is already CID unlocked too....¿?
I was afraid the "downgrading" has to be done in the same version range. (2.15)
Thanks again for the wiki proposal, will go there.
The wiki site is a real mess actually, with no trace of usefull info specific for the prophet. (Sorry to say) Just a couple of ROM's some not working.
No one with a 2.15 ESN rom to share?
Regards.
i updated my s200 with a crossbow rom and now its dead
the update was sucssfull but when i push the power button the screen fliker for les than one sec and that it
my s200 will not go even to bootloader
any ideas ?
http://forum.xda-developers.com/showthread.php?t=292667
what ipl/spl do you have?
i have a G3 idont it was 2.20 i think
plz check again if its 2.20 or 2.21 and hope that its 2.20^^
edit:
mh you have g3 ... try the solution out that i mentioned before and try the cid unlock from pdamobiz.com... then reflash an older rom with spl/ipl.
edit:
the pdambiz can only be flashed when you are in align screen... if you have 2.21 take a wizard rom and go into align screen with active sync connection and flash the cid unlock rom.
if you have 2.20 then just try another prophet rom out and see if it works...
my s200 already cid unlocked
alright here is that one:
RUU_Prophet_2090732_20907115_020720_QtekGER_Ship.exe
sorry that its in german but its the only one I have right now... you can also change the language with some programm which is available here in the board..spl and ipl is included and it should downgrade you pda to 2.09
its an original shipped rom, they are always for g3 and g4 right? it doesn't say anything about that, anyways i used it on my g4 and it worked so you might wanna check out before as you have a g3 device, but I'm pretty sure it works for g3 and g4
so i maneged to get my s200 into bootloader
i now i have IPL 1.01 and SPL 1.01 but my device is G3
so i tried to flash RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and its start and when it reached 95% igot an error that says
"ERROR 326 ivalid command, the nfb file cannot be used with your pda phone
and one got and idea what to do ????
just now i tried to flash "RUU_Prophet_2090732_20907115_020720_QtekGER_Ship.e xe" and it fail at the first time
so i tried again and it sucsess
and now my qtek work again
i am verey happy
thanks for your help
how did u manage to get into bootloader
hi,
um facing the same problem and can not reach the bootloader screen....how did u do so...
please help
flashin Jamin with wrong flash
--------------------------------------------------------------------------------
hi men
i have jamin g4 i flashed it and now i have this mixed bootloader
IPL 1.000
SPL 2.20.0001
i need ur help i am in this problem for 2 months
thanks
dr ebrahim
i don't see the problem. it's no biggy if you have different versions of ipl and spl. if it works, leave it like that
homw come no proble
my jamin stopped in bootloader i can not install any rom
original or cooked all going to end and after restart of phone again bootloader so i need help
thanks
uve bricked ur phone im afraid, nothing that can be done to bring it back!
if all is hopeless and your device is a G3, try http://forum.xda-developers.com/showthread.php?t=319636
(just part with spl first)
this worked for me, but as i sure learned from flashing ipl/spl 3.08 (before flashing ipl 3.08 of wizard and totally bricking my g3 prophet ), this is no guarantee for others
i tried the post but the same problem i am in bootloader as before
any new idea