Prophet version - JAMin, XDA Neo, S200 Software Upgrading

Hi all,
How do I found out my Prophet's version?? G3/4..
Thx,
Frank

Soft reset your device and it appears on the top - left side of the splash screen..
G3 - x.xx.
G4 - x.xx.0001

Related

M600 stuck in bootloader after G4 rom flash

hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help
jasonrabbit said:
hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help
Click to expand...
Click to collapse
i have the same problem too, i used g4 rom and now its stuck at bootloader rainbow screen.
my IPL is 1.00
SPL is 2.20.0001
jester gold card
after lots of looking and reading of threads i need to wait for Jester Gold Card
come on jester work your magic my M600 is now a paper weight.
jasonrabbit said:
hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help
Click to expand...
Click to collapse
Hi,
Its very common to do mistake of flashing G3 device with G4 rom, and
no of people doing this mistake increasing every day.
Its very sad to have a bricked device, rather it wud hav been better
to search the forum thourouly before making attempt to flash.
Yes the only hope is Gold Card Project success,
We all r waiting for that day!
ic. Gold Card Project
anyway i did a stupid mistake that lead my prophet into a paper weight.
i click on the G4 rom thinking thats step 2...
now i cant down grade back to old wm5
If You & press camera button + reset
You'll get in the bootloader screen
after that try a ROM wich is your phone's
( I disconnected while updateing tot jesters AKU 3.3 )
Have a functional phone now
CooT said:
If You & press camera button + reset
You'll get in the bootloader screen
after that try a ROM wich is your phone's
( I disconnected while updateing tot jesters AKU 3.3 )
Have a functional phone now
Click to expand...
Click to collapse
no, u cant flash anything now as g4 rom is inside a g3 device
and the moment u try to "downgrade" it will prompt for a NEWER FILE to be used
my m600 stucked at very starting screen help me plz
hi guys
i got a orange spv m600 i tried to unlock it from the stuff which i got online but instead i messed up the phone
its stucked at the vry first screen showing a orang logo
and
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 1.0.13.21
could any one help me out plz plz plz i am a new person and i dont know any thinig about this roms or any software u can email me my emial id is
[email protected]
subject m600(plz dont forget to mentioned in the subject field) bcoz i get loads of junk mail that y i delete them
thanks
Same Problem
I have a fried M600 that is also stuck in the "Orange" Screen when turned on...
How can I get past this?
I have tried re-installing the original ROM but it still refuses to boot.
What Installer do I need to download?
Which ROM would do the trick?
How do you install CAB files without Activesync?
Can anyone help me on this as I'm lost without my M600.....

Please Help : IPL/SPL 3.08 my Prophet is dead !!!

I have Prophet G3, and upgraded it with IPL/SPL 3.08, all went ok, and gave a successful message, but it restarted and went black and refuse to start in anyway, when i press the power button, it flash with a very weak light on the screen (hardly seen) and the indicators flash also with a very light red light on the top and a very light green light on the bottom one,
please help if anyone knows what happened.
Try this, should help:
http://forum.xda-developers.com/showthread.php?t=319636
I do , But still not working
Thanks any way !
uhm ... if you dont found any issue ... send me a PM!
i have a working g4 doc and can replace your damage g3 doc.
chavdar said:
Try this, should help:
http://forum.xda-developers.com/showthread.php?t=319636
Click to expand...
Click to collapse
this should really work. i had exactly the same issue (with lights blinking). the part with hotwiring with the charger was essential in my case. that was the only way i could boot the device in order to reapply ipl and spl (if ipl is ok, device should be able to start into boot mode, so no hotwiring necessary anymore)
I'm trying with everything and all what I have but it's still flashing
Hi
I connected directly by my charge cable (cutting charger cable ) and it's work but the problem is I can't downgrade SPL 3.08
Can some one help me to downgrade from SPL:3.08 to SPL:2.20
info.: now my IPL is 2.20 and my SPL is 3.08
My Prophet is G3 JamIN
My best regards,

help in jamin stop in boot loader moood

hello to all
i have now device stop at 3 colure menu and not more
ipl 1.00
spl 2.20.0001
and can't start any room
can i use mtty like jasjar
or any advanced please ?????
thx to all
jamin G3 with SPL 2.13.0001
Hi:
Sorry my english isn't good. I'm spanish.
I read some forum but i don't read the same problem I've.
I've a imate jamin. Last sunday I installed a new rom made by Franlov (WM6.1 Clear). First i make a hardspl and installed the new rom. Well.
After i need install the original rom, but the problem now is:
Jamin KO.
Three color display and the red numbers:
IPL 2.13
SPL 2.13.0001
If I execute a romupdateutility G3, i've a error 300, invalid tool.
If I execute a romudateutility G4, i don't have error but i've the same display (three colors, etc)
I can't make a hardspl because the jamin doesn't run and msdos display says "any device connect".
CAn you help me?
I read it's possible downgrade ipl and spl making a force spl but the program i don't know if exist for jamin or s200.
THANKS
my email: [email protected]
THANKS THANKS THANKS THANKS
melmel1989 said:
hello to all
i have now device stop at 3 colure menu and not more
ipl 1.00
spl 2.20.0001
and can't start any room
can i use mtty like jasjar
or any advanced please ?????
thx to all
Click to expand...
Click to collapse
I have the same problem! I cannot active sync as it does not connect to the device. So I cannot flash.
IPL 2.13
SPL 2.13.0000
We tried but can not find solution!
I am tired of asking for help, and nothing!
Hi guys..im a newbie..been there myself...Wat u need to do is download the wm5 original rom from http://www.v-dog.net/XDA/PVTemp.zip & unzip it to sum location of ur pc then connect ur device & wen the 3 color screen comes run the RUU Utility G4... Thats it ...u'll be back to WM5
After that just follow this awsum guide by dioxda2 http://forum.xda-developers.com/showthread.php?t=353547
aia_6584 said:
Hi guys..im a newbie..been there myself...Wat u need to do is download the wm5 original rom from http://www.v-dog.net/XDA/PVTemp.zip & unzip it to sum location of ur pc then connect ur device & wen the 3 color screen comes run the RUU Utility G4... Thats it ...u'll be back to WM5
Click to expand...
Click to collapse
We tried! The problem is that active sync as it does not connect to the device.That is the big problem ....
TJSM said:
We tried! The problem is that active sync as it does not connect to the device.That is the big problem ....
Click to expand...
Click to collapse
1. go to my guide, download PVtemp first ~~~~
2, force the prophet to bootloader mode, (how to? see my thread)
3. plug back to USB ( rear PC USB port please...)
4. if you see the "USB" on the left bottom Prophet screen, YOU ARE DONE!!!!
5. Flash PVtemp NOW .... delay is bad~~~~
help me about this
hi,i have a IMATE JAMIN.my phone Does'nt boot after install wm6 & other program.when it turn on display
ipl2.13.0001
spl2.13.0001
gsm02.20.21
os10.2.0.8
after display a black screen & does nothing.
and USB Does'nt recognize my device.
can you help me?
have you tried to Hard Reset the unit after flashing to WM6.1?
You can try it by pressing CAMERA + COMM Button + Reset Button (for 3 seconds)

some help needed

IPL version is: 2.21.0001 and the SPL is 2.21.olip
Rom changes log:-
Original I-mate kjam wm5
to
amp1
to
amp2
to
tnt series 19xx
to
tnt series 20273
to amp v3
Problem is :-
1).when my device start it shows htc logo then tnt series logo then amp logo
2).when I updated to ampv3 it says it has been updated but it shows ampv2 only
How to correct it? So that it shows single logo as I have removed htc & TNT series rom?
When I first changed from imate to amp it showed imate blue screen to amp screen & then I flashed it changed imate screen to htc screen (I forgot what I did that time very long ago).
if i am not wrong my problem is related to somelike here in http://forum.xda-developers.com/showthread.php?t=357787&highlight=kjam
matter solved delete this pls.........

plzz some one help

i have a htc touch p3452 i have updated the rom WM6.1 to 6.5 it started on time and when i turn on at morning it want start.the screen "smart mobilety" comes and again it goes off and i have try to the button on+cam ant screen with the IPL & SPL comes and then i try the rom update tool but still the same problem plzz some one help me
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Elf
Notice your device is elfin
Hope it helps,
i have read it now what do i do plzz tell me i am a little new in flashing ,what happens is when i pun the turn on button the massage "smart mobility" comes then it want boot to OS then when i push on+cam button the screen comes in three color and says IPL 2.20.0002 and the SPL 1.11.0000
now what do i do plzz tell me step by step

Categories

Resources