Database Info

RADIO ROM UPDATE ERROE-114

DEAR ALL PLEASE HELP ME I WAS UPDATING MY XDAIIS FROM SEEO2.COM
AND I STARTED GETTING THIS ERROR-114,
AND MY PHONE HAS TURNED GREY AND I CANNOT OPERATE IT PLEASE HELP ME SOON.

When you say grey do you mean blank with USB 1.01 or Serial 1.01 displayed at the top and bottom of the screen?
If so, do a search on these forums for "bootloader" and "upgrade" and you'll find all the help you need. If it IS showing these items at the top and bottom don't worry...your phone is in the bootloader mode and the forum posts you find will tell you what to do from that point.
Cheers
Ant

GREY SCREEN WITH V 2.06 DISPLAY
THANKS FOR YOUR REPLY BUT IA'M NEW TO THIS SITE SO CANT GET THROUGH THE RIGHT LINK,
KINDLY GIMME THE LINK
CHEERS
SHARAN

ROM : 1.12.62 WWE
Does any one know from where can i download rom:1.12.62 wwe for my xdaIIs.
I TRIED TO UPDATE IT BUT SMTHG WENT WRONG AND MY PHONE HAS GONE BLANK, GREY COLOUR SCREEN SAYING USB . V 2.06.
KINDLY HELP ME TO START MY PHONE.
REGARDS
SHARAN MEHTA

Take out your battery, and leave it out for 30-60 minutes.
Reboot your PC
Follow instructions http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade

Help for my dopod 818pro

my dopod 818 pro when i turn phone on , it will blink like lcd goes wrong , when i go into bootloader mode , its only show IPL 3.08 AND SPL 3.08 , what should i do now . please help !

what was the last think you have do?
flashing does ipl spl version?

the last is i flash ipl 3.08 and spl 3.08

RE:Help
hanyean1 said:
my dopod 818 pro when i turn phone on , it will blink like lcd goes wrong , when i go into bootloader mode , its only show IPL 3.08 AND SPL 3.08 , what should i do now . please help !
Click to expand...
Click to collapse
1. Download the NVID(no vendor) AKU2.2 rom for WM5 here :http://rapidshare.com/files/17208693...24721_NVID.exe
2. Get in to the bootloder mode
3. connect your USB
4. execute the AKU2.2 rom
Then you should be back on track!

i had try to flash many rom like example JAMin_WWE_213923_2139123_022021_ship.... but it will always stop at 95% , can someone tell me what to do

hanyean1 said:
i had try to flash many rom like example JAMin_WWE_213923_2139123_022021_ship.... but it will always stop at 95% , can someone tell me what to do
Click to expand...
Click to collapse
for how long do you wait ?! it's normal to be stuck on 95% for awhile, just don't touch your phone, it will continue !

wait till the end and it show error

calm down, be patient
just do the step philchen1979 posted. do it every step very carefully do not miss any step. you should get it back on. if you already done it, then do it again carefully. use the rom philchen direct you, that's the best rom to flush an almost dead prophet.
good luck.

help in jamin stop in boot loader moood

hello to all
i have now device stop at 3 colure menu and not more
ipl 1.00
spl 2.20.0001
and can't start any room
can i use mtty like jasjar
or any advanced please ?????
thx to all

jamin G3 with SPL 2.13.0001
Hi:
Sorry my english isn't good. I'm spanish.
I read some forum but i don't read the same problem I've.
I've a imate jamin. Last sunday I installed a new rom made by Franlov (WM6.1 Clear). First i make a hardspl and installed the new rom. Well.
After i need install the original rom, but the problem now is:
Jamin KO.
Three color display and the red numbers:
IPL 2.13
SPL 2.13.0001
If I execute a romupdateutility G3, i've a error 300, invalid tool.
If I execute a romudateutility G4, i don't have error but i've the same display (three colors, etc)
I can't make a hardspl because the jamin doesn't run and msdos display says "any device connect".
CAn you help me?
I read it's possible downgrade ipl and spl making a force spl but the program i don't know if exist for jamin or s200.
THANKS
my email: [email protected]
THANKS THANKS THANKS THANKS

melmel1989 said:
hello to all
i have now device stop at 3 colure menu and not more
ipl 1.00
spl 2.20.0001
and can't start any room
can i use mtty like jasjar
or any advanced please ?????
thx to all
Click to expand...
Click to collapse
I have the same problem! I cannot active sync as it does not connect to the device. So I cannot flash.
IPL 2.13
SPL 2.13.0000
We tried but can not find solution!
I am tired of asking for help, and nothing!

Hi guys..im a newbie..been there myself...Wat u need to do is download the wm5 original rom from http://www.v-dog.net/XDA/PVTemp.zip & unzip it to sum location of ur pc then connect ur device & wen the 3 color screen comes run the RUU Utility G4... Thats it ...u'll be back to WM5

After that just follow this awsum guide by dioxda2 http://forum.xda-developers.com/showthread.php?t=353547

aia_6584 said:
Hi guys..im a newbie..been there myself...Wat u need to do is download the wm5 original rom from http://www.v-dog.net/XDA/PVTemp.zip & unzip it to sum location of ur pc then connect ur device & wen the 3 color screen comes run the RUU Utility G4... Thats it ...u'll be back to WM5
Click to expand...
Click to collapse
We tried! The problem is that active sync as it does not connect to the device.That is the big problem ....

TJSM said:
We tried! The problem is that active sync as it does not connect to the device.That is the big problem ....
Click to expand...
Click to collapse
1. go to my guide, download PVtemp first ~~~~
2, force the prophet to bootloader mode, (how to? see my thread)
3. plug back to USB ( rear PC USB port please...)
4. if you see the "USB" on the left bottom Prophet screen, YOU ARE DONE!!!!
5. Flash PVtemp NOW .... delay is bad~~~~

help me about this
hi,i have a IMATE JAMIN.my phone Does'nt boot after install wm6 & other program.when it turn on display
ipl2.13.0001
spl2.13.0001
gsm02.20.21
os10.2.0.8
after display a black screen & does nothing.
and USB Does'nt recognize my device.
can you help me?

have you tried to Hard Reset the unit after flashing to WM6.1?
You can try it by pressing CAMERA + COMM Button + Reset Button (for 3 seconds)

I need help

I accidently HardSPL my Qtek 9100 phone with PProphet LF Xtreme BLUE V2
and now my phone is getting hung after showing first boot screen HTC INOVATION and comes to the blue page imate where it shows the IPL , SPL, GSM and OS information.
what will i do now please help me to revert my OS

by searching xda developers forum i come to reach at this URL http://forum.xda-developers.com/archive/index.php/t-275350.html
by pressing and hold camera button and turning on the qtek 9100 it comes to the multicolor boot screen here i connect my phone with usb and it shows usb at bottom of the screen of phone.. but now what should i do to revert back or to make my phone use able as i HardSPL my phone with wrong ROM
please help me, i will be very thankful to you guys.
waiting for replies, kindly reply me asap, i know you guys can do help me.

What IPL/SPL...? it displays? What exactly you mean by 'as i HardSPL my phone with wrong ROM' ?, Did you actually apply HardSPL (Patched IPL/SPL),does it show IPL 2.21.0001 and SPL 2.21.olip ? or it shows original official IPL/SPL.If its still with Official Bootloaders,then download the Official Qtek rom and flash it in Bootloaders (MultiColor Screen),when you get it and usb appears at the bottom of the Bootloader Screen,hope it'll work.
You can download the official Qtek rom from this link :-
http://s131209249.online.de/vodafone_software/9100.htm
Good luck!

Thanks zabardast_1
I solved my problem by the help of xda-developers I found another thread where i found the solution i was doing a little mistake that i wasn't disabling the Active Sync now I am happy and looking for some more custom roms
Thanks

[ Need HeLp ] Tytn Won't Boot To OS

I had a tytn II and i flash it witH SPL 3.29 Hard2 using Sifu's 4.0 ROM and radio 1.70.19.09.. It work fine at the begining.. But after i used for a while the system get freeze and tytn restart the device by it self.. The problem is after it get restart it won't boot to OS and it get stuck in first screen which it has text " Smart Mobility" and give info about Radio version and also ROM version.. And it stood still in that screen forever.. Somebody has experience this problem and has a solution.. For the inFo i experience the same probLem as i install another ROM ( AbusaLza ULtimate X2 V.11 ) So I tHink it doesn't had to do witH the ROM.. PLease HeLp me.. Thx beFore..

Kaiser Stuck at Bootloader (aka Tri Color or Red, Green, Blue Screen)? Solutions Here
Use the search & post in the appropriate thread.
Thread closed.