I had a tytn II and i flash it witH SPL 3.29 Hard2 using Sifu's 4.0 ROM and radio 1.70.19.09.. It work fine at the begining.. But after i used for a while the system get freeze and tytn restart the device by it self.. The problem is after it get restart it won't boot to OS and it get stuck in first screen which it has text " Smart Mobility" and give info about Radio version and also ROM version.. And it stood still in that screen forever.. Somebody has experience this problem and has a solution.. For the inFo i experience the same probLem as i install another ROM ( AbusaLza ULtimate X2 V.11 ) So I tHink it doesn't had to do witH the ROM.. PLease HeLp me.. Thx beFore..
Kaiser Stuck at Bootloader (aka Tri Color or Red, Green, Blue Screen)? Solutions Here
Use the search & post in the appropriate thread.
Thread closed.
Related
My Jamin is only showing the first boot screen (the blue one with I-mate logo)then it stops on a white screen....
Can somebody help please
Thanx
You not provided us a lot of information but.
Is your device CID unlock?
Did you try to use a ROM with no vendor id on wiki???
I have the same problem too, my friend has the same.... Upgrading went well, with no problem, but phones stuck at the Operator Logo (Dopod, O2, Qtek...) I did upgrade all kinds of ROM but they just show the logo and hang up..
Does anyone have an idea??????
hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help
jasonrabbit said:
hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help
Click to expand...
Click to collapse
i have the same problem too, i used g4 rom and now its stuck at bootloader rainbow screen.
my IPL is 1.00
SPL is 2.20.0001
jester gold card
after lots of looking and reading of threads i need to wait for Jester Gold Card
come on jester work your magic my M600 is now a paper weight.
jasonrabbit said:
hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help
Click to expand...
Click to collapse
Hi,
Its very common to do mistake of flashing G3 device with G4 rom, and
no of people doing this mistake increasing every day.
Its very sad to have a bricked device, rather it wud hav been better
to search the forum thourouly before making attempt to flash.
Yes the only hope is Gold Card Project success,
We all r waiting for that day!
ic. Gold Card Project
anyway i did a stupid mistake that lead my prophet into a paper weight.
i click on the G4 rom thinking thats step 2...
now i cant down grade back to old wm5
If You & press camera button + reset
You'll get in the bootloader screen
after that try a ROM wich is your phone's
( I disconnected while updateing tot jesters AKU 3.3 )
Have a functional phone now
CooT said:
If You & press camera button + reset
You'll get in the bootloader screen
after that try a ROM wich is your phone's
( I disconnected while updateing tot jesters AKU 3.3 )
Have a functional phone now
Click to expand...
Click to collapse
no, u cant flash anything now as g4 rom is inside a g3 device
and the moment u try to "downgrade" it will prompt for a NEWER FILE to be used
my m600 stucked at very starting screen help me plz
hi guys
i got a orange spv m600 i tried to unlock it from the stuff which i got online but instead i messed up the phone
its stucked at the vry first screen showing a orang logo
and
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 1.0.13.21
could any one help me out plz plz plz i am a new person and i dont know any thinig about this roms or any software u can email me my emial id is
[email protected]
subject m600(plz dont forget to mentioned in the subject field) bcoz i get loads of junk mail that y i delete them
thanks
Same Problem
I have a fried M600 that is also stuck in the "Orange" Screen when turned on...
How can I get past this?
I have tried re-installing the original ROM but it still refuses to boot.
What Installer do I need to download?
Which ROM would do the trick?
How do you install CAB files without Activesync?
Can anyone help me on this as I'm lost without my M600.....
Hi,
I have XDA Neo and last night, I upgraded my Neo (G4) to jesterz AKU 2.3 ROM with 8MB poolsize and after successful upgrade, I get first bootscreen with IPL, SQL and GSM but nothing happens after that as it just get stuck at this screen. Then I am resetting this device and then it gets into bootloader screen. I have tried doing hard reset using Comm+Camera+Reset Button but it doesn't halp as well...as it gets into bootloader again.
Could you guys help me to get my device working again?
Thanks.
downgrade to an original rom
I'm stuck in the same problem.. My XDA stops at the O2 Boot screen, showing the IPL (2.15.0001), SPL, GSM and OS.. and nothing happens..
And I can't downgrade or even upgrade to another OS version, 'cause any I ran RomUpgradeUtility says that the pda isn't connected to the PC..
Remembering: I am not stuck at the 3 colors bootloader screen. I'm stuck at the O2 IPLs BootScreen, where I am not able to communicate with the computer by USB..
What should I do now?
Thnx
Abib said:
I'm stuck in the same problem.. My XDA stops at the O2 Boot screen, showing the IPL (2.15.0001), SPL, GSM and OS.. and nothing happens..
And I can't downgrade or even upgrade to another OS version, 'cause any I ran RomUpgradeUtility says that the pda isn't connected to the PC..
Remembering: I am not stuck at the 3 colors bootloader screen. I'm stuck at the O2 IPLs BootScreen, where I am not able to communicate with the computer by USB..
What should I do now?
Thnx
Click to expand...
Click to collapse
You people should read before touching custom ROM's!
Hold both the camera and comm button to get in the 3 color screen. Then flash with an original ROM.
Wilson77 since you have a G4 device you can't just flash it with any ROM. Check the forum on flashing your G4 device.
Mccune, you're right.. curiosity suX!
I did the Bootloader Procedures (Camera + Reset) and now I'll try to downgrade to the shipped german rom, and then to the English Crossbow that ran nice since January..
But Thanx for the help!
Abib said:
Mccune, you're right.. curiosity suX!
I did the Bootloader Procedures (Camera + Reset) and now I'll try to downgrade to the shipped german rom, and then to the English Crossbow that ran nice since January..
But Thanx for the help!
Click to expand...
Click to collapse
LOL Noting wrong with cuiosity, on the contrary. But flashing the wrong way (specially the G4) may brick your device. Were just tryin' to prevent that by providing you with a lot of information
I accidently HardSPL my Qtek 9100 phone with PProphet LF Xtreme BLUE V2
and now my phone is getting hung after showing first boot screen HTC INOVATION and comes to the blue page imate where it shows the IPL , SPL, GSM and OS information.
what will i do now please help me to revert my OS
by searching xda developers forum i come to reach at this URL http://forum.xda-developers.com/archive/index.php/t-275350.html
by pressing and hold camera button and turning on the qtek 9100 it comes to the multicolor boot screen here i connect my phone with usb and it shows usb at bottom of the screen of phone.. but now what should i do to revert back or to make my phone use able as i HardSPL my phone with wrong ROM
please help me, i will be very thankful to you guys.
waiting for replies, kindly reply me asap, i know you guys can do help me.
What IPL/SPL...? it displays? What exactly you mean by 'as i HardSPL my phone with wrong ROM' ?, Did you actually apply HardSPL (Patched IPL/SPL),does it show IPL 2.21.0001 and SPL 2.21.olip ? or it shows original official IPL/SPL.If its still with Official Bootloaders,then download the Official Qtek rom and flash it in Bootloaders (MultiColor Screen),when you get it and usb appears at the bottom of the Bootloader Screen,hope it'll work.
You can download the official Qtek rom from this link :-
http://s131209249.online.de/vodafone_software/9100.htm
Good luck!
Thanks zabardast_1
I solved my problem by the help of xda-developers I found another thread where i found the solution i was doing a little mistake that i wasn't disabling the Active Sync now I am happy and looking for some more custom roms
Thanks
i have a htc touch p3452 i have updated the rom WM6.1 to 6.5 it started on time and when i turn on at morning it want start.the screen "smart mobilety" comes and again it goes off and i have try to the button on+cam ant screen with the IPL & SPL comes and then i try the rom update tool but still the same problem plzz some one help me
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Elf
Notice your device is elfin
Hope it helps,
i have read it now what do i do plzz tell me i am a little new in flashing ,what happens is when i pun the turn on button the massage "smart mobility" comes then it want boot to OS then when i push on+cam button the screen comes in three color and says IPL 2.20.0002 and the SPL 1.11.0000
now what do i do plzz tell me step by step