JAMIN Dead - JAMin, XDA Neo, S200 Software Upgrading

My Jamin is only showing the first boot screen (the blue one with I-mate logo)then it stops on a white screen....
Can somebody help please
Thanx

You not provided us a lot of information but.
Is your device CID unlock?
Did you try to use a ROM with no vendor id on wiki???

I have the same problem too, my friend has the same.... Upgrading went well, with no problem, but phones stuck at the Operator Logo (Dopod, O2, Qtek...) I did upgrade all kinds of ROM but they just show the logo and hang up..
Does anyone have an idea??????

Related

Updating Qtek S200 ROM has cell phone locked in Boot loader

Hi there,
I bought a Qtek S200 and I tried to do a ROM upgrade. I followed the instructions given in the website http://kimpeacocke.blogspot.com/2006/06/how-to-perform-rom-upgrade-on-your-i.html
I got the upgrade from this site at ftp://xda:[email protected]_022021_Dopod_PDAMobizEdition_v101.zip
I followed the procedure given in the website given above. After I upgraded successfully the phone has become locked in the boot loader screen. I have done both soft reset and hard reset. Nothing works. The phone gets locked in the boot loader screen. Need help.
Thanks,
Julian
Try to reflash with Qtek ROM instead...
Why you said that it's locked on the Bootloader screen?
Is it frozen or locked?
Hi Rayan,
I tried flashing with the Qtek ROM. I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there. Nothing else happens. I have sent the device back to the guy from whom I bought it.
I got the same problem as Julian - I tried to upgrade with the mentioned ROM and now my device are stucked at the boot screen :?
Some help here ? I'm in same situation
I have an O2 with Dopod rom, after I instaled some software I must to restart and then my O2 are stucked/frozen on Windows Mobile splash screen
Only if I remove the battery I can stop the pda.
I can't do nothing to make him to start. Some ideea ?
:shock:
Later Edit :
solved with http://forum.xda-developers.com/viewtopic.php?t=49298&sid=35f5c1e9e165997b4634ea0c7700ac76
Same issue here with a O2 Xda Neo with German Rom.
Applied the procedure of the prophet wiki : How to CID unlock and Upgrade your Prophet (SPL 2.09 & 2.15)
After step 6 and a soft rest it is stuck in bootloader and will not do anything else, not even off or hard reset...battey has to be removed in order to shut it off....
Any ideas?
Remind me to find the guy who wrote the wiki page on unlocking CID in Prophet......good job pal......
Aaaaarggghhhh %^*^%*^%*^%*
Problem solved..
Hi everyone,
Good news at last. I sent my Qtek S200 to the guy from whom I bought the phone. He fixed it and now I am a happy man. You can check with him if everything else fails. Email him at E gadget Depot ( [email protected]).
All the best..
i tried to upgrade my QTEK S200 with this RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip it got to 95% and then it gives me nbf file cannot work with your PDA. Please help.
I have this problem too, i know only one exit from this situation - i have flash my s200 with RUU_215737_2157135_023021_QTEK_s200_RUS ROM, now it work fine.
you find it her
bootloader issue
I have the same problem too, If anybody know method to fix this problem please help us.
I cannot active sync as it does not connect to the device. So I cannot flash. As soon as I powerup, I get the Qtek screen and then it goes to the bootloader screen and stays there.
THX in advance for you help
Robert
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Please, the links to the solution does not exists anymore.
I need help!!
Qtek S200 stuck in tri-color screen, all flashing so far still does not make it work..
When doing a hard reset I get format failed.
/Jonas
I have same problem!
Anyone can help?
TJSM said:
I have same problem!
Anyone can help?
Click to expand...
Click to collapse
Go to HMA4's upgrade guide or my thread in my signature...
same problem
i have exactly same problem and i couldnt solve it too.So can someone help us?
Please someone explain completely what should we do.
i can not active sync and waiting on the bootloader screen
bacardilima said:
have same prob but solved thanx to this post
http://forum.xda-developers.com/viewtopic.php?t=58892&highlight=boot
and remember First off all, to enter in Boot Loader Mode is:
Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.
Then upgrade using a ROM
Click to expand...
Click to collapse
daelee,
you can get normal state, follow the bolded attention at above quote.after entering the 3 colour screen connect USB and you can load the original WM5 ROM on your device. after that, upgrade to any wm6 by the rules and active sync.
the link is dead on that message..
i went to the that page and the link for solution is dead.
http://forum.xda-developers.com/showthread.php?t=376561
find out is there anything that can help!

Stuck at bootloader

Hi,
I have XDA Neo and last night, I upgraded my Neo (G4) to jesterz AKU 2.3 ROM with 8MB poolsize and after successful upgrade, I get first bootscreen with IPL, SQL and GSM but nothing happens after that as it just get stuck at this screen. Then I am resetting this device and then it gets into bootloader screen. I have tried doing hard reset using Comm+Camera+Reset Button but it doesn't halp as well...as it gets into bootloader again.
Could you guys help me to get my device working again?
Thanks.
downgrade to an original rom
I'm stuck in the same problem.. My XDA stops at the O2 Boot screen, showing the IPL (2.15.0001), SPL, GSM and OS.. and nothing happens..
And I can't downgrade or even upgrade to another OS version, 'cause any I ran RomUpgradeUtility says that the pda isn't connected to the PC..
Remembering: I am not stuck at the 3 colors bootloader screen. I'm stuck at the O2 IPLs BootScreen, where I am not able to communicate with the computer by USB..
What should I do now?
Thnx
Abib said:
I'm stuck in the same problem.. My XDA stops at the O2 Boot screen, showing the IPL (2.15.0001), SPL, GSM and OS.. and nothing happens..
And I can't downgrade or even upgrade to another OS version, 'cause any I ran RomUpgradeUtility says that the pda isn't connected to the PC..
Remembering: I am not stuck at the 3 colors bootloader screen. I'm stuck at the O2 IPLs BootScreen, where I am not able to communicate with the computer by USB..
What should I do now?
Thnx
Click to expand...
Click to collapse
You people should read before touching custom ROM's!
Hold both the camera and comm button to get in the 3 color screen. Then flash with an original ROM.
Wilson77 since you have a G4 device you can't just flash it with any ROM. Check the forum on flashing your G4 device.
Mccune, you're right.. curiosity suX!
I did the Bootloader Procedures (Camera + Reset) and now I'll try to downgrade to the shipped german rom, and then to the English Crossbow that ran nice since January..
But Thanx for the help!
Abib said:
Mccune, you're right.. curiosity suX!
I did the Bootloader Procedures (Camera + Reset) and now I'll try to downgrade to the shipped german rom, and then to the English Crossbow that ran nice since January..
But Thanx for the help!
Click to expand...
Click to collapse
LOL Noting wrong with cuiosity, on the contrary. But flashing the wrong way (specially the G4) may brick your device. Were just tryin' to prevent that by providing you with a lot of information

imate pdal

help
im having a problem with my device it runs very slow sometimes it hangs on green boot screen
what can i do to get rid of this problem
is there available new rom for this and does it help?
br,
parot
i mate pdal
i have i mate pdal now in my phone wm6.1 installed. and its boot screen also changed but i want change my boot screen like old blue imate screen. plz tell me what i can do for return to my old original boot screen
Welcome to the forum
As you can see the last post here was from 2007, nobody reply because this is an HTC forum devices only.
Perhaps another member can point you into the right forum
Good luck,

I need help

I accidently HardSPL my Qtek 9100 phone with PProphet LF Xtreme BLUE V2
and now my phone is getting hung after showing first boot screen HTC INOVATION and comes to the blue page imate where it shows the IPL , SPL, GSM and OS information.
what will i do now please help me to revert my OS
by searching xda developers forum i come to reach at this URL http://forum.xda-developers.com/archive/index.php/t-275350.html
by pressing and hold camera button and turning on the qtek 9100 it comes to the multicolor boot screen here i connect my phone with usb and it shows usb at bottom of the screen of phone.. but now what should i do to revert back or to make my phone use able as i HardSPL my phone with wrong ROM
please help me, i will be very thankful to you guys.
waiting for replies, kindly reply me asap, i know you guys can do help me.
What IPL/SPL...? it displays? What exactly you mean by 'as i HardSPL my phone with wrong ROM' ?, Did you actually apply HardSPL (Patched IPL/SPL),does it show IPL 2.21.0001 and SPL 2.21.olip ? or it shows original official IPL/SPL.If its still with Official Bootloaders,then download the Official Qtek rom and flash it in Bootloaders (MultiColor Screen),when you get it and usb appears at the bottom of the Bootloader Screen,hope it'll work.
You can download the official Qtek rom from this link :-
http://s131209249.online.de/vodafone_software/9100.htm
Good luck!
Thanks zabardast_1
I solved my problem by the help of xda-developers I found another thread where i found the solution i was doing a little mistake that i wasn't disabling the Active Sync now I am happy and looking for some more custom roms
Thanks

HELP!! dead prophet.. dopod 818 pro.. i am a noob.. help! please!!

i tried to upgrade to i-mate, first i unlock it using "awizard" then i use lokiwiz 02b, then i followed the instructions.. i upgrade to "ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe" the process was so smooth until 100% but when restart, i cant boot anymore, it stucks in the scren with black and the white light on the screen keeps on blinking.. help please.. im so frustrated..
spl 2.69 g3
sorry idont remember the other info.. please, please help me..
LISTEN UP, put it again into bootloader mode do a new g3 or g4 update with a new rom, and see if it works.

Categories

Resources