M600 Rom upgrade - JAMin, XDA Neo, S200 Software Upgrading

Hi guys before I start, I have read numerous posts and tried to do as much reading before writing this, but my findings are not conclusive.
I have just got a new M600, so it’s locked to Orange and has no rom alterations done.
I want to upgrade my rom as I don’t like the Orange stuff in there anyway and I was very happy with a Qtek rom on my M500.
1 Do I need to sim unlock the phone, to rom upgrade?
2 Can I just upgrade using the files as in post http://forum.xda-developers.com/viewtopic.php?t=49298
3 There’s talk of the CID being unlocked, does this need to be done, before upgrade.
4 There is no sure way of backing up existing rom?.
5 Once upgraded, is the phone still sim locked.
Basically I don’t want a brick sitting on my desktop.
Regards

Up!
I too want to update my Orange France SPV M600 freshly bought this week but i don't know if i need to CID unlock the phone before upgrading with a Qtek rom.
And another n00b question: is there a list somewhere with the new features of the roms ?
Thanks in advance ^^

who can hep me
I too want to update my Orange France SPV M600 but my Orange France SPV M600 is now in 3 line color and numberis: IPL 2.10.0001 and SPL 2.G3

Reading the XDA-Wiki, you can see that a CID unlock is required for doing anything with ROMS. As a result, if you have a G3 phone, which you need to check, then follow the instructions here
If you have a G4 prohpet, then unfortunatley you cannot CID unlock the phone, thus no ROMS.
SIM unlock isnt required for ROM upgrades, but the CID criteria must be met.
Once again, if you had read the wiki, you would know that ROM backup is available here
Hope this helps,

Related

Anyone managed to upgrade Orange M600 to Imate Rom?

Has anyone managed to upgrade a Orange M600 to the Imate Rom using the ROMUpdateUtility.exe on this forum?
yes, i used imei check to unlock and and set the cid, then used the latest imate rom (2.13.9.23 WWE)
It is much faster in general use and i am sure the screen redraw in tomtom 5 is smoother. other added bonus is no more orange branding!
You can use a modified RUU utility that is posted here bypass the need to change the cid, but you will still be simlocked
Thanks, hopefully my M600 is in the post at the moment
Would like help
I also have a UK orange M600 locked to Orange and would like to put the I-Mate rom onto it.
What files to I need to get.
What is cid
Do I need to have my phone unlocked 1st.
Could someone please give me a step by step how to instruction on how the process is done.
Is it totally successful in all ways.ie does everything work.
Can I make a backup of the original rom.
Many thanks in advance
Stephen
Got my M600 today and flashed it straight to the Imate Rom. Always prefered the Imate software.
No you dont need to unlock the phone before flashing. just search the forum for the guide and file needed to flash any Rom. Very easy.
Does it work
Ok
Does it all work ok ie
Bluetooth
WiFi
Ird
Internet
MSN
What was the name of the file or files u used and how did you do it

HTC ROM or DOPOD ROM?

Hi everyone. I've just got hold of the vodafone version of the HTC VOX and will be unlocking it via the imei unlock website shortly.
I've been reading through the posts here and I can find the DOPOD rom, which seems ok but not sure if there is an HTC version. From what I can see the DOPOD is really HTC but more aimed at the Asian market.
So is there an HTC version of this ROM available yet and where can it be found?
Does anyone have any info or screen shots of what the apps and features of the DOPOD rom actually are? The reason is that Vodafones versions seem ok but I am interested to know what the other brands add in or leave out?
Look forward to hearing from you all....
Some people dumped their ROM, but at the moment there is no tested/proven method to flash these dumps. I'm not aware of any official ROM update from HTC for the unbranded HTC S710. Once you have unlocked your Vox, and with unlock I mean "CID unlocked" which means you can flash any ROM (not just your provider's branded version), and once there is an official HTC ROM update available, you are able to flash it.
Keep an eye on my "Vox bootloader" thread here, because it deals with those subjects CID unlocking, dumping and flashing ROMs.
Update
Apparently there are official ROM updates available. See"
ftp://ftp.xda-developers.com/Uploads/Vox/rom/
There's a test version as well. Whatever it is ...
Thanks for the reply and info. I like the page you've set-up and will be monitoring it for more updates.
Think I'll try the DOPOD rom as this vodafone version is just damn annoying with all there network settings plastered all over it (as you'd expect!).
Always like the more generic roms so will give it a go....
Super quick Q
If i get my device (HTC Vox) unlocked from Imei-check.co.uk, that means (removes SIM/NETWORK LOCK - use any provider, removes CID lock - flash any firmware)
So please confirm that since it is CID unlocked, i can flash ANY vox firmware (i love the look of Dr. Gonzo's)
I apologise for being a bit apprehensive, but i just bricked my SPV M600 (Aka HTC Prophet)! lol
R.I.P Beautiful Prophet!
Yes. You can use any ROM once it is CID unlocked, however you do not need to pay for this service, you can use the Vox USPL to patch SPL to allow unsigned ROM to be flashed.
The only benefit to services like imei-check are permanent SuperCID and removing the SIM/SP lock.

ROM Flash - after SIM/CID unlock (IMEI-Check)

Just bought a cheap recon Orange E650 and now waiting for my code from IMEI-Check to SIM/CID unlock.
Forgive me for being a n00b but most of the flash guides assume that your phone is locked (therefore run a CID bypass etc).
Can anyone tell me which steps of the flash process I can avoid once I have unlocked the phone?
I wish to get rid of the Orange ROM and put on either the HTC original or Gonzo 6.1 ROM but want to avoid extra steps to reduce any chances of f**k ups
there are no steps which you can avoid.
SIM/CID unlock just make your phone able to use other sims.
But it will be still application locked and 3rd party rom locked.
so you have to follow the entire guide starting with the USPL.
mdou said:
Just bought a cheap recon Orange E650 and now waiting for my code from IMEI-Check to SIM/CID unlock.
Forgive me for being a n00b but most of the flash guides assume that your phone is locked (therefore run a CID bypass etc).
Can anyone tell me which steps of the flash process I can avoid once I have unlocked the phone?
I wish to get rid of the Orange ROM and put on either the HTC original or Gonzo 6.1 ROM but want to avoid extra steps to reduce any chances of f**k ups
Click to expand...
Click to collapse
I did exactly the same as you matey. Bought a cheap 650 and put an HTC ROM on it. Now i've got tomtom V6 on it (after a few slight probs!) but all in all, vey happy.
Just follow this link as i did but read it carefully ESPECIALLY the bit about copying file twards the end (FLASH SECTION, NUMBER 14). In all honesty, what you are sat waiting for to arrive isn't worth a toss. Just follow this thing as i did and you'll be cool
Steve
Official HTC ROM on
Got my file from IMEI-Check through & successfully unlocked the SIM/CID.
Now able to use Orange E650 with my O2 SIM
Took a gamble and downloaded the latest HTC ROM from the forum FTP site - wanted to test - if the phone is now CID unlocked then the ROM should work coz the ROM installer will think it is a HTC S710 not E650.
Ran the ROM upgrade took about 5-6 minutes to flash.
Phone then reboots - word of warning - it then takes about 5 minutes for the ROM to configure.
Don't panic like I did - staring at the Windows Mobile splash thinking I had bricked it! :-D
Now a de-branded E650 - did not have to run any USPL stuff etc.
However I am sure if I want to use a cooked ROM then I'll definitely follow all of the steps.
Phone is now quicker & no horrible Orange icons
Nice simple process - just hope HTC release the WM 6.1 upgrade for the Vox.
we all hope for the same....

Order of events!

Just so I don't get flamed to bad for asking a what some would consider a simple question, I had an 8525 that I made SuperCID and HardSPL, so I have done this before. I have also read the majority of material in the wiki and the forums on what I would like to do.
So here goes,
I just purchased the Tilt and am looking to do the same. It is stock to the block right now.
ROM 1.62.502.0
Radio 1.27.14.09
Protocol 22.45.88.07H
My question is what is the sequence of events that I need to do in order to get my phone SuperCID and HardSPL to the point I can start using some of these wonderful 6.1 ROMS?
What HardSPL? v1.0? 3.56? I would guess 3.56 and that it should be the first thing I do.
Now what SuperCID? I found 2, here http://forum.xda-developers.com/showthread.php?t=361236 and here http://forum.xda-developers.com/showthread.php?t=375583
Any guidance would be very appreciated.
Thanks for your help
JD
The hardSPL depends on the ROM you're going to flash. Some ROMs work better with certain SPLs. Check.
For ease of mind, hardSPL first then security unlock. You can't go wrong in that order.
JudgeDredd67 said:
Just so I don't get flamed to bad for asking a what some would consider a simple question, I had an 8525 that I made SuperCID and HardSPL, so I have done this before. I have also read the majority of material in the wiki and the forums on what I would like to do.
So here goes,
I just purchased the Tilt and am looking to do the same. It is stock to the block right now.
ROM 1.62.502.0
Radio 1.27.14.09
Protocol 22.45.88.07H
My question is what is the sequence of events that I need to do in order to get my phone SuperCID and HardSPL to the point I can start using some of these wonderful 6.1 ROMS?
What HardSPL? v1.0? 3.56? I would guess 3.56 and that it should be the first thing I do.
Now what SuperCID? I found 2, here http://forum.xda-developers.com/showthread.php?t=361236 and here http://forum.xda-developers.com/showthread.php?t=375583
Any guidance would be very appreciated.
Thanks for your help
JD
Click to expand...
Click to collapse
Ok, so I don't know about the super cid process but here's at least how you can start the journey:
Copy KAIS_SSPL onto your device
take out sim card and SD card
run KAIS_SSPL
Unplug USB wait 5 -15 seconds, plug in.
Run the Hard_SPL of your choice depending on your ROM choice. Seems like the ones out there are using 3.56, but it varies
Make sure to also flash a compatible radio!
Viola! you are done and ready to flash a ROM!
JudgeDredd67 said:
J
What HardSPL? v1.0? 3.56? I would guess 3.56 and that it should be the first thing I do.
JD
Click to expand...
Click to collapse
1.) Flash 1.1JockyW HardSPL
2.) Using Jockys SuperCID process security unlock your device.
3.) Flash to any other HardSPL
4.) Flash the ROM of your choice.
Thank you all for your comments. I feel a lot better going into this now.
Noob question sorry. Sequence of events....
Appologies in advance as this is obviously a nooby question....
I have just aquired a t-Mobile branded MDA Vario III. I want to CID/SIM Unlock it as well as Hard-SPL it so I can install whatever ROMs I would like.
I previously had a HTC Wizard that I CID & SIM unlocked with the Lociwiz tool, however I had to downgrade the IPL/SPL to version 1.x to get this to work. Once it was unlocked I was able to install any ROM. I am looking for a similar thing with my new Kaiser and I can't find a Wiki or guide explaining the steps. It seems there are 1.x HardSPL's as well as Security unlockers, plus 3.x HardSPLs but no definitive guide as to the correct sequence.
1. I want to unlock the phone so I can use any SIM
2. I want to unlock the phone so I can install any ROM
With the Wizard I had to downgrade IPL/SPL run the Lokiwiz tool and the upgrade to whatever I wanted. How do I do the same with the Kaiser?
Sorry....
Andy
ADB100 said:
Appologies in advance as this is obviously a nooby question....
I have just aquired a t-Mobile branded MDA Vario III. I want to CID/SIM Unlock it as well as Hard-SPL it so I can install whatever ROMs I would like.
I previously had a HTC Wizard that I CID & SIM unlocked with the Lociwiz tool, however I had to downgrade the IPL/SPL to version 1.x to get this to work. Once it was unlocked I was able to install any ROM. I am looking for a similar thing with my new Kaiser and I can't find a Wiki or guide explaining the steps. It seems there are 1.x HardSPL's as well as Security unlockers, plus 3.x HardSPLs but no definitive guide as to the correct sequence.
1. I want to unlock the phone so I can use any SIM
2. I want to unlock the phone so I can install any ROM
With the Wizard I had to downgrade IPL/SPL run the Lokiwiz tool and the upgrade to whatever I wanted. How do I do the same with the Kaiser?
Sorry....
Andy
Click to expand...
Click to collapse
Since you are a Senior Member, you should already know the first rule is to search before creating new threads. However, since I am in a good mood from starting my new job this week, I will "help" you out. Check out the threads below, and after some in-depth reading, all of your question will be answered.
HardSPL: http://forum.xda-developers.com/showthread.php?t=334679
Sim Unlock: http://forum.xda-developers.com/showthread.php?t=361039
Now here is your nickels worth of free advice: Do NOT attempt to run the SIM Unlocker with a WM 6.1 ROM or the 3.xx HardSPL installed.
Closing this thread so it can fade away....

WST 4.2.2 Unlock problem on E650

Hey Everybody,
I have a problem unlocking my Orange SPV E650 using Wizard Service Tool.
-Hard reset the device
-I copy CERT_spcs.cab and EnableRapi.cab to my device
-I install both files (CERT_Spcs.cab won't install: "not intended for this
device"?
-I open WST 4.2.2 and click "Repair IMEI".
-The "Repair IMEI-box" opens and show nothing (in both fields)
I've tried this with different ROM's (VOX, E650, S710).
I've also tried different "unlocking CAB's" (RemoveSecurity.cab, SdkCerts.cab)
I've also tried it with "Microsoft Security Configuration Manager" (this works)
Problems:
-I can't alter IMEI
-So, I can't unlock the phone from Orange
When I boot the phone in bootloader-mode it shows:
------------------------------
VOX WIFI
ONBL 1.35.0000 LG
VOX
------------------------------
SPL 1.35.0000
VOX IU
------------------------------
CPLD - 04
USB
------------------------------
I really don't understand what is wrong with this thing.
I have already unlocked a few S710's this way, and it worked flawlessly.
Does anyone have any idea what's wrong?
BTW: I have a good working (unlocked-) S710 laying around here.
Is it an option to make something like a "full backup" of that one,
and write it to the E650?
Thanks you for any help!
BR,
Bart
There is a unlock thread here, where it tells you what exactly you need to do. It comes with a small "donation" though.
Hi!
Thanks for the fast reply.
I have already unlocked so many phones, that I just won't have it that I cannot unlock this one for free; it's like a sport ;-)
Apart from that, I have already unlocked multiple phones of this (hardware-)
model, so I would really like to do it myself, with maybe a little bit of help.
I have already read all unlocking threads, and my problem is not mentioned, that is why I placed this post.
For money you can unlock anything, but it's just no fun... ;-)
BR,
Oh, OK I see your point. Just don't brick it...
LOL, I'll try not to... ;-)
Any hints on my problem?
Thanks in advance,
BR
as its an orange e650 -same as i have
i found i couldnt flash a new rom as it was locked
all i did first was install Orange debrand pack from Modaco forum and voila! lets you flash!!
maybe thats why you have unlocked other 710's as yours isnt a 710 yet its a E650!
hope that helps-worth a go
Hi,
Thanks for the input.
I'm not trying to flash a new ROM - that works.
I'm trying to sim unlock the phone...
BR
Bart
do you have uspl the phone?
What he tries has nothing to do with USPL. He tries to remove the SIM-Lock, which prevents you to use a different SIM-card.
Hello Frauhottelmann,
Thanks for sorting that out ;-)
BR

Categories

Resources