Hi all ,
I was updateing my JAM ROM with USB.. everything work fine.. but i guess i had upload Arbic ROM on PM-10A which support WWE, after upgrade my JAM was keep rebooting so i try to download WWE ROM from imate FTP and meanwhile i Remove Bettery of my JAM and once i install battry back they is no power nothing just blank screen. seems bootloader gone? is there chance i can repair.. i do NOT have warrnaty on it , service center say they need to change MotherBoard. is there any other way i can reload bootloader and then upgrade orignal ROM?? pls. help........( SORRY for MY English as i m Arbic Native ).[/b]
Don't know why you removed the battery. What happens when you do the soft or hard-reset? Tried pressing power & camera & soft-reset at the same time for some secs, till bootloader should appear? I don't think it's really broken as you said it was loading the OS whili you removed the battery.
Cheers, M
I think the bootloader itself can get corrupted whilst doing the upgrade..but only when using a 'modified' ROM...
I did the same thing to mine back in the time when BigStorage was the in thing.
My JAM was totally dead like yours and I did have to send it back to service center.
But saying that, I recently had forgot to charge the battery (whilst doing a ROM upgrade) and everything went totally dead then too- i was worried that I had fried the device one again- but I left it to charge overnight (initially there were no LEDs of any sort), the next day, the amber/yellow LED was lit- did a hard reset and things were back to normal.
I don't think any sort of factory ROM would 'fry' your device- it's only because I tried to modify the bits for BigStorage that led to a corrupt bootloader and therefore a dead device.
Like 'oltp' says- it seems highly unlikely that your device is totally dead.
tnx for reply guy's, i did Tried pressing power & camera & soft-reset at the same time for some secs.. but nothing comeing on screen.as you said may be bettery is not charged as when i stared ROM update i had 50% charged. now when i try to charge with USB no LED.. .. but some how i do not belive service center guy.. that " board burn" need to change board as i have just done ROM update from IMATE web. but tomorow i ll get it back from service center and give try with new battery and let you know ppl..
I really wish you all the best & I do think those guys do know & try everything. They just replaced mine as it was really dead two weeks ago.
Too bad you're not having so much luck.
Cheers, M
hi all ,
Finally my JAM is up and Running without changing Mboard. as i suspect it was battery problem I borrow my friend full Charged battery and did Boot loader with Cam+Power+SoftReset and then connect with USB and reload ROM and now it up and running fine .. and then i replaced with my original battery
Great to hear that.
Related
hi guys...
i have this problem... i think i've flashed my mini too many times or something, my last flash was WWE_11200_550_11200... and it went flat liner, dead.... totally... can't on it now, can't bring it to boot loader or what so ever... is there any method to bring it back to life? pls help...
there's no led appearing when i'm charging... but when i removed the battery cover, the led turns red... that happens also when i remove the battery and put the back cover back on...
man... am i screwed or what...
Assuming you have tried leaving out the battery over night, etc, etc- Your device will need to be sent to the service center.
Had the same thing happen to me back in July- I think the bootloader was corrupted.
I replied to a similar problem only a few days ago.
i think you're right... so is there anyway i can fix the bootloader?
I'm not aware of any utility available to public for repairing the Magician bootloader.
I think there is one for the Blue Angel- I tried that one in vain but no joy.
As long as your device is in warranty, you shouldn't have much of a problem.
thanks man... i guess have no other choice but to send it back...
cheers..
I have have had this happen to me twice now,
left the battery out for 5-6 hours then re-inserted it (with the back cover on, m500 has a quirky switch that the cover pushes down) and then held the buttons down to place it into bootloader mode (held down until it appeared)
good luck
Imp
pls give me more details... cos if i'm sending it back for repair, i will need to post it oversea... that will be my last resort...
im having the same problem..
as far as i can tell the battery is just completely flat..
however without a working ROM the unit will not charge the battery..
thats what i believe anyways
Sage said:
im having the same problem..
as far as i can tell the battery is just completely flat..
however without a working ROM the unit will not charge the battery..
thats what i believe anyways
Click to expand...
Click to collapse
Might be cheaper to purchase a battery, perhaps it comes charged?
After I mistakelt upgrade my s200 with a Kjam rom, the device will not turn on again, now I need to boot from the sd card has anyone an OS backup which work on Sd card?
I ll try to alive the device from sd card but I dont know how I copy the os to the sd card.
Do you have the bootloader alive?
thanks for your help, no I could only reach to Bootscreen when the wall charger plugged, but naturally I could not update the rom from the charger, so I think the only solution is using a backup image from the sd card.
laleyandasvivenporsiempre said:
thanks for your help, no I could only reach to Bootscreen when the wall charger plugged, but naturally I could not update the rom from the charger, so I think the only solution is using a backup image from the sd card.
Click to expand...
Click to collapse
AFAIK, it means that your battery is empty. Try to charge the battery with any working S200/100/110/9100 and you will be able to run the bootloader, then you will restore the device. Correct me, if I wrong.
the problem is not about the charger or battery, although the battery 100% it still cant be opened the problem is after load the Kjam ROM, the device reject to open, it could onyl turn on if the wall charger is pluged however I could plug the USB data cable at the same time. I send it to the service center hope they could recover the device...
laleyandasvivenporsiempre said:
the problem is not about the charger or battery, although the battery 100% it still cant be opened the problem is after load the Kjam ROM, the device reject to open, it could onyl turn on if the wall charger is pluged however I could plug the USB data cable at the same time. I send it to the service center hope they could recover the device...
Click to expand...
Click to collapse
This behaviour is typicel for a device with both broken image and discharged battery. The battery WAS at 100%, but the Prophet does not charge it if has no working OS, so the batery was drained until you tryed to reanimate the device. Ensure that the pattery is full with other, working device.
Walker;
I charge the battery with an other prophet I ll wait untill the light become green and battery is 100% then after when I tried with the boken prophet it did not reanimate the device. it is very interesting to see that wizard could work with prohet's rom but not vice versa
Flash wrong ROM consequences
Let me relate my experiences; exactly the same problem.
Update KJAM rom on DOPOD 818Pro ... Damn phone could not power on at all, at most on bootloader, plugin USB cable --> no USB word displayed at bottom.
Try to flash any RUU also no go ...
ON battery, could not power up at all, only plug in wall charger then managed to get to bootloader ... so all was lost.
Send to EBAY (where i bought from) and they flash the bloody Dopod 830 ROM..
During collection, plugin my own battery, same cannot power up... evidently the flash to Kjam killed my battery too !
The good thing was that with the 830 rom, my IPL became 2.16 (from 1.00).
So i reflashed to Dopod latest 2.15 ROM ok... further flash to AKU 2.3 hacked ROM also no problem.
SO, ultimately the cause was a killed battery from the ROM update.
Use a meter to measure contact pt 1 & 2 from top edge of battery, (supposed to be min 4.7V) I believe it's 0V or totally shorted out.
This battery cannot power on the phone, but still can be used as spare battery by power up with wall charger first, the battery still has it's 3.7V available to sustain operation.
So u can go buy a new battery and Flash to the correct ROM now.
Good Luck
to buyaoxiao;
Thanks for your comments but;
I think there is something more serious than the battery; I have two prophets, and I also try with the other's battery and still nothing happened, more than that, both of the batteries work with the non-broken prophet.
Flash wrong ROM
Hmm.. that may be true also.
I cannot really conclude as i was lucky the ebay shop i bought from agree to flash my S200.. i believed they had some trouble too as it took them a week to get it to Dopod 830 rom ... when normally they say 1 day will do. They refused to go into specifics though... (afraid that i demand for 1-1 exchange)
I have had the same problem, so that's why I decide to sent to dealer to try to fix it. Now I'm expect to have a call to pick it up. Hope they can improve my prophet to the new chip G4.
I tryed several times, hours to fix it, but no way. Sorry I can not tell you something good.
I am sure that there should be a way to fix those devices Jtag should not be the only way( if it really works) it is meaningless to loose a device only because of a wrong rom update
hello everybody.i have a problem with my spv c600.i bought it few days ago.i had installed some apps on it and next morning my phone was off,althought the battery was full.i made hard reset for three times and the phone started.but this is happening every morning from then.and now i can`t make hard reset.after it asks me to press 0 key shows orange screen and after that turns off.sometimes shows the windows mobile screen but only that and turns off.i don`t understand what is the problem...is it software or hardware problem?
can someone tell me what can i do?i want my phone back...i like it to much
sorry for my bad english
i`m not sure if i posted to the correct section but no one can`t help me?
Try to enter Bootloader (hold camera button and shortly hold Power).
After Bootloader started, you need reflash official ROM.
it enters in bootloader but it stays only 3 seconds and after that turns off.i`m going crazy....i don`t know what to do...is it the battery the problem?but last time when it worked the battery was full
other ideas?
try other battery, or try turn on without battery only power cable plugin.
the same thing without baterry.it stays 3-4 second and after that turns off.which is the problem?
and i don`t understand what is with the led colour.when i put the phone to charger the light is red...i try to make hard reset but the phone turns off and and one cuple of times...the led color becomes orange and green sometimes...
so?what is going on?
can someone help me please?
I think that it is hardware problem. Before am I bought my HTC Tornado, I had Sony Ericsson P900 and after 2 years using suddenly he after power on he stopped at the introductory animation. So I gave it to the service and told me that is it a problem with the motherboard. Your SPV C600 looks that is on it similar.
and what happend with your tornado?
With my Tornado nothing. The hardware problem was in my Sony Ericsson P900. In service told me that is it a problem with the motherboard and that the correction would cost cca 850$ . So I declined correction and bought HTC Tornado, which still works .
oh..thanks anyway.i think i will go to service with my spv...
wow it didn`t started for 2 days and now is working like is new.i don`t understand...where is the problem?
it worked only 2 hours and after that it was dead again
what can i do to fix this problem.it`s ok to change the rom?
fixed.i sold the phone
Hello,
i have a brand new o2 XDA Touch pro. After trying (unsuccessfully) to remove the CID to flash the original HTC Firmware (the O2 Firmware was lame), the XDA went off and is completly dead now. The last thing I was able to see was a strange display behaing (some strange look and fading off).
The phone does not react on pressing the Power-On Button! No reaction!
Can anyone help me or has anyone a hint how to hard-reset the device?!
So far I remember there was a trick by removing the battery for about 24 hours (this worked for my older xda mini s phone). May this work for this phone, too?
Please help me!!!
Best regards
Gabriel
Did you try the old tric to remove the battery and then put it back in? When you do the Hard-SPL it would remove the CID lock. It would seem to go dead and unresponsive as happened with mine. I just removed the battery and put it back in and it powered up fine. Checked the tri-colour boot screen to make sure it was done. It is in the thread for flashing your first ROM.
Hello wildcard,
thanks for your reply.
I already tried removing the battery. Yesterday I tried for about an our and completly off power (no USB Power or PC connected). Still no reaction after trying to power on with battery plugged.
I'll give it another try in about a few hours after leaving the phone powered off about 12 hours. So far the phone seems completly dead! I would be glad even to see any light / display going on with try-color mode, but anything keeps powered off after battery connected and giving the power-on button a try.
Best regards
Gabriel
UPDATE:
Phone still completly dead / no-power on possible after 12 hours power-off / no battery!
Tried several key-combinations for soft+/hard reset with battery and/or USB-Power even with plugging in while pressing the keys including power-on. NO Reaction
How can this be??? May it only be possible to send it in to O2?
I was unable to complete any CID unlock / HTC Firmware update on the O2 device. They stuck always on 0% or failed before this step and until that time the phone always rebooted into WM6 after battery removal. So I don't think O2 could blame me for doing anything wrong... and I don't understand why there is not even Power for Bootloader mode possible. I don't think that any software could harm the hardware in such a way that not even power-on is possible??!
Any ideas of developers to reanimate the phone? I will try keep power of for a few days now until I go to O2 with the phone...last try. For a XDA Mini S i owned once (that phone has been unlocked too), this worked once it had a similar failure... maybe I have luck in 2-3 days with my TouchPro phone.
Best regards
Gabriel
I am thinking that you may really need to send it in to O2. Might be your best bet, let's hope some one more ducarted than I am chimes in.
Ok people let me tell you i love my fuze and i have followed all directions to updating my rom and i had a nice new cooked rom and everything was running fine until one day i go and take my phone off the charger and it turns off as if it had no power from the battery so then i try to turn it back on and still nothing :O "Sad FacE" then after staring at my phone for 20 minutes in complete disbeleive i started being creative starting with a soft reset to a hard reset , also take note when i put my phone back on the charger the light that breathes no longer came on, then i got my phone to boot to hard-spl olinox 1.90 and it said no boot image and sat there so then i turn the phone off and did a rom update thru my hard spl after updating the phone went to reset but only turned off and the only thing i can pull up is hard spl. plz help it would be so so so much appreciated and im not slow at computers so u wont have to explain everything to me i do programming but never cooked a rom or delt with this
Sounds like you may have a hardware problem; maybe there was a power surge or something and part of the phone got fried. Just a guess, but sorry, man. Could it have gotten wet somehow?
I guess the other possibility is that the battery is just completely dead. You can get into bootloader without a battery (pull the battery, plug it in, and you'll see). You can even flash, but you can't boot up. Try cleaning the contacts, and make sure they're contacting the battery electrodes. Now that I think about it more, I bet it's just the battery, or it's related to the battery (maybe the usb port is screwed). If this fails, go buy a cheap battery for the phone and try it out. If that doesn't work, just flash the stock rom and then the stock spl and return it for warranty. All isn't lost.
Thnx
ok thank you for you're reply. the battery is good i can flash rom off my micro sd card with out power source to phone also the phone had dropped about a foot from the ground onto carpet the same time i started having this problem im wondering if somethen is loose idk. im figuren if the phone can boot olinex on its own then it is still working as in the screen has full fuction as far as i know all buttons work, as i was looking into this phone im wondering if the thing that stops ur phone from charging and turning on when its over heating might be damaged. there is no warranty so im tryen to look into this as much as possible
GOOD NEWS
Ok I have no idea what was wrong with my phone but i found a htc service manual and disassembled my phone then put it back together and hoped for the best and press the power button and boom wala it came on to the at&t flash logo and problem solved all help was appreciated and i hope to help other peeps out as well and cooking up some roms eventualy
Farmer Ted said:
Sounds like you may have a hardware problem; maybe there was a power surge or something and part of the phone got fried. Just a guess, but sorry, man. Could it have gotten wet somehow?
I guess the other possibility is that the battery is just completely dead. You can get into bootloader without a battery (pull the battery, plug it in, and you'll see). You can even flash, but you can't boot up. Try cleaning the contacts, and make sure they're contacting the battery electrodes. Now that I think about it more, I bet it's just the battery, or it's related to the battery (maybe the usb port is screwed). If this fails, go buy a cheap battery for the phone and try it out. If that doesn't work, just flash the stock rom and then the stock spl and return it for warranty. All isn't lost.
Click to expand...
Click to collapse
You were more help than AT&T i took my phone into the store and told them my problem and they went straight to the idea of a new phone and i kinda got mad and explain to him i dont want your phones i wanna fix mine and he told me it was bricked and i need to take it to a corperate AT&T n the closest one was about 6 hour drive so i left lol so thanks for ur help
That's i had the same prob. once and after a week of frustration, i noticed my reset button was cocked to one side slightly, after jabbing my styles at it a few time presto my POS started worken again