on booting the s110 i get a white screen the phone still starts and i can connect to it through active sync.
any ideas?
urgent help :whithe screen on qtec s100
on booting the s110 i get a white screen the phone still starts and i can connect to it through active sync.
any ideas? its my pocket damaged or?!!!! please,please i need your help me
who know about this
u myt have dropped ur magician....i had da same problem...after openin da magician i found out that the display cable has come out from da connector... attaching it back and i got my display back!
Related
I was upgrading the ROM of my XDA IIS device through bluetooth connection as I had some problem with my usb cradle. Suddenly an interruption took place and the device became dead. The screen is now grey showing "Serial" at the top and ver. 2.07 at the bottom. Pls suggest me how to restore my device to normal operation.
dnayak_jsr said:
I was upgrading the ROM of my XDA IIS device through bluetooth connection as I had some problem with my usb cradle. Suddenly an interruption took place and the device became dead. The screen is now grey showing "Serial" at the top and ver. 2.07 at the bottom. Pls suggest me how to restore my device to normal operation.
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Bootloader_mode
I attemped to upgrade my SX66 today and midway through, i lost connection to my SX66 and the only thing i get on the display is USB Ver 2.07 when usb cable is plugged in, when unplugged, i get Serial Ver 2.07. Phone will not hook up with Active Sync or do a soft or hard reset, any assistance sould be appreciated.
thanks,
tom
I have a mda compact which when the battery is inserted reads "serial v1:2"
nothing else happens unless the usb cable is conected then the screen changes to "usb 1.2". and the pc says unidentifiable device present and dosen't sync.
any help apriciated ! mda is other wise in as new condition.
The red led iluminating breifly when the usb is conected.
UPDATE
The mda compact was showing no indication of charging with just a red indicator from the led for 2seconds when the charger was pluged in.
When conected to the PC the screen changed from serial to usb, how ever would disconect after a while and was unable to conect to the mda via the usb as not recognised.
After leaving to charge for a night, with no indication of charging, the MDA did not then self disconect from the PC and so the battery must have been flat !
Was then able to down load the "1.13 T-Mobile rom" on to it from the upgrading link and now all is well.
Still don't know why it was stuck in bootloader mode ?
i have a problem in my prophet.
when power on after startup logo stuck in colors line..
i try to upgrade but phjone not connecting with the pc i clean pcb even change usb charging socket but no result foun .....
Have S200 G3 in Tri Color screen that gets to 50% on ROM load before it starts shutting off n on. It does the same thing if it is plugged into a pc via usb cable w/ battery installed after a short period of time.
It does not turn off n on it it is simply sitting there w/ the battery installed. Only when it is plugged in w/ a USB.
Does some 1 have access to info on phone recovery via flash card and Rom that I can use.
If not steps on resolving the problem long enough to load a basic Rom on the unit.