Have S200 G3 in Tri Color screen that gets to 50% on ROM load before it starts shutting off n on. It does the same thing if it is plugged into a pc via usb cable w/ battery installed after a short period of time.
It does not turn off n on it it is simply sitting there w/ the battery installed. Only when it is plugged in w/ a USB.
Does some 1 have access to info on phone recovery via flash card and Rom that I can use.
If not steps on resolving the problem long enough to load a basic Rom on the unit.
Related
This morning I tried to flash bikertibi's WM6.5 ROM.
In the middle of flashing, the connection was lost and now my phone is stuck in the tricolor bootloader screen.
the weird thing is that the screen keeps flashing? is like it keeps restarting every 15 seconds or so. So it can't retain a connection with my computer long enough for me to do anything.
when i take out the battery and leave it for a while before placing it back, it could hold the connection for a longer period of time (but not that long. probably for a minute?).
i can't figure out what is the problem. I've changed the USB cable and still no change. could it be the battery has problems or is it a hardware problem?
many thanks to anyone who could help (tho i'm not optimistic since this part of the forum seems quite dead)
well
Now...this is vry important ...... plz do at ur own risk...
remove the battery
Cut ur data cable (USB) and u'll find a white wire in da bundle of wires ... connect it to the battery plug near the camera
All the others , u connect to the last plug...(there are 6 plugs for putting battery...do not connect to the middle ones)
now connect the USB cable to ur "xp" pc.
the pc will recognize the device and start syncing...
run the rom u want AFTER COMLETING SYNC ... It is sure to succeed ...
plz if any thing happend let me know
cscheng:
I losted a lot of times comm upgrading Roms and NOTHING HAPPENS! (sorry for screaming...) Try to search some info at forums but....
-Try to close your upgrading soft (PC)
-Switch off-on your phone
-Connect usb cable again and try to upgrade now.
(maybe it refuses 2 or 3 times the upgrading, but I was trying and after 4 times it was like ever!)
Please, make it as your own risk.
Good luck friend!!
I have same Problem PLease Help
Have S200 G3 in Tri Color screen that gets to 50% on ROM load before it starts shutting off n on. It does the same thing if it is plugged into a pc via usb cable w/ battery installed after a short period of time.
It does not turn off n on it it is simply sitting there w/ the battery installed. Only when it is plugged in w/ a USB.
Does some 1 have access to info on phone recovery via flash card and Rom that I can use.
If not steps on resolving the problem long enough to load a basic Rom on the unit.
cscheng said:
This morning I tried to flash bikertibi's WM6.5 ROM.
In the middle of flashing, the connection was lost and now my phone is stuck in the tricolor bootloader screen.
the weird thing is that the screen keeps flashing? is like it keeps restarting every 15 seconds or so. So it can't retain a connection with my computer long enough for me to do anything.
when i take out the battery and leave it for a while before placing it back, it could hold the connection for a longer period of time (but not that long. probably for a minute?).
i can't figure out what is the problem. I've changed the USB cable and still no change. could it be the battery has problems or is it a hardware problem?
many thanks to anyone who could help (tho i'm not optimistic since this part of the forum seems quite dead)
Click to expand...
Click to collapse
Provide better break down, if possible w pics of actual steps. Ex. I don'd understand what you mean about the white wire and middle conectors in battery section. Only allow the other 2 to connect or ???
Dr.Thrax said:
well
Now...this is vry important ...... plz do at ur own risk...
remove the battery
Cut ur data cable (USB) and u'll find a white wire in da bundle of wires ... connect it to the battery plug near the camera
All the others , u connect to the last plug...(there are 6 plugs for putting battery...do not connect to the middle ones)
now connect the USB cable to ur "xp" pc.
the pc will recognize the device and start syncing...
run the rom u want AFTER COMLETING SYNC ... It is sure to succeed ...
plz if any thing happend let me know
Click to expand...
Click to collapse
Hey guys
I couldn't get an answer to my question in any topic, so I decided to post here and ask for help.
I bought a Galaxy 5 from my neighbor and I didn't test it 'cause it was with the battery discharged.
I charged the battery to 100% I tried to turn on my galaxy.
But every time I try to turn on the smartphone, It get stuck on a screen with samsung logo and with the text: "Ramdump mode (arm9 mode)".
I just tested it in 4 computers but everytime I connect the phone to usb it just starts to charge the battery.
I can enter in download mode to put a stock rom on it, but it doesn't help me so much 'cause if my phone isn't recognized in the PC and in Odin, I can't do nothing.
So that's the situation: My smartphone isn't recognized by the computer (windows don't at least show any message about usb device connected). When I plug it in usb it just starts to charge.
So I'm asking for help.
Is there any way to put a bootable android in my microSD that starts automaticlly the installation when I turn on the phone ?
Thanks
Anyone haver a solution for this problem?
***SOLVED****I have a Samsung Galaxy Skyrocket 2 SGH-I727, rooted on gb 2.3.5. It has been working flawlesly for months. All of a sudden, when I connected the device to power I was UNABLE to shut it down. I would slelect shut down and it would REBOOT itself instead of staying shut down and showing the BATTTERY ICON charging. Also suddenly I could not access the device as a mass storage from windows. Windows would say device not recognized. After researching for hours I came across one idea the did the trick. The problem was simple. The USB connector "tongue" inside the USB adapter in the phone apparently got bent somehow. This precented the USB cable connecting in from making contact with all the wires inside and THAT caused the 2 problems mentioned in the title. I took a very thin micro flat head screwdriver, GENTLY CAREFULLY put a little pressure on the USB tongue inside the phone's USB adapter and voila!...I could shut down the phone while connected to power, Windows again regognized the device. Who wold have thunk it?
For any of you who come across this, and I saw MANY MANY, not only for GS2 but for MANY andriod devices, and many failed "solutions", here is the answer!...
Have fun.
I think I have a similar problem.
Until two weeks phone was working perfectly fine. Then realized that the battery was getting drained in about 4-6 hours even when idle with no apps running, sometimes battery charge dropped like 15% in a moment, it didn’t indicate charging when connected to power though battery got charged and sometimes it indicated as charging when not connected to power. Phone could not be detected when connected to PC. Also, if I connected to PC after shutting it down, it automatically rebooted. This was weird.
Then when battery was fully dead and I connected to power, it tried to boot but immediately shutdown saying ‘low battery’ and again tried to boot… it was stuck in this loop.
I thought it might be android issue so flashed it with UCKK6 Kernel + Rooted System Package ((Thanks to creepyncrawly’s Download Repository)
But now, it still is not detected by the PC. It boots automatically when connected to PC after shutting down, but not when connected to wall power.
Cleaned the micro USB connecter, tried different cables and laptops.
Earlier Android: Version 2.3.6; Baseboard Version I777UCKK6; Kernel Version 2.6.35.7
After Flashing: Version 2.3.6; Baseboard Version I777UCKK6; Kernel Version 2.6.35.7
Pls I I tried to flash cm rom 12.1 on sgh 1727 skyrocket and it stuck on patching system image unconditionally n it stays there forever please what can I do?
First of all thanks to all helpers over here
and sorry for my bad english
so its working fine the problem started when i clean install windos 10 pro after that i connect to pc via usb it not
connecting i thought its the drivers problem so i tried these things-
1 update drivers through windows update
2 tried to install drivers by nif (after google)
3 installed MotorolaDeviceManager_2.5.4
4 changing usb ports
But not worked yet evern not showing usb notification after connecting to pc then i reboot my pc to windwos 7 home premium but same problem and tried all same thing.
Then i realise that my phone battey icon shows charging but not charging battery draining slowly so i removed it but battery icon showing it charging even after revoving plug then i turned it
off then againg it showing charging even if it off without any charger then after google i reboot in twrp recovery and started backing up my rom at that time
i connect my wall charger so after some time when backup finished i start my phone then it charging normally but againg when i connect to my pc it again shows me same
problem.
Now the actual problem is whenver i connect to my pc battery icon start showing its charging even after remove usb then after connecting to my wall charger in recovery
mode for about 5-6 mints its working fine.
Thanks to all in advance i hope someone will solve my problem
My Device is Moto G 2015
2 GB Stock 6.0.1 with January 2017 security patch
Hi,
yesterday i replaced the mainboard of my g955f. After that i rooted the phone and flashed a newer stock rom with odin. I didn't like the rom and tried to install an older one. But because of the newer bootloader version of the installed stock rom i got a FAIL in odin after hitting the start button. Then i disconnected the phone, downloaded a newer stock rom and flashed it via odin without any problems. But since then my g955f shows some strange power charging behavior:
1. When i turn it off and plug in the usb charger then the download (odin) mode comes up and it doesn't charge. But i can exit the download mode via power+vol. down and the phone restarts and boots up normally. Everything else works and looks normally, too (booting into twrp, connecting to pc via usb, turn phone on without usb connection etc.). It also doesn't charge when i plug in the cable and turn it off.
2. I can only charge my phone when i restart it, wait until the homescreen appears and then plugin the cable. If i would wait until the lockscreen/standby-screen shows up or i put it into standby and then plug in the cable it won't charge. Furthermore it wont charge after i charged and unplugged it, put it into standby and then plug it in again. But if i avoid standby/lockscreen after unpluging and plug it in again, then it charges.
I have already tried other stock and custom roms but the behavior is the same. Because of the working usb connection to the pc and the ability to charge (under special circumstances) i don't think that the problem is hardware-related. To me it seems like a file/software/firmware-problem. I guess that standby and shutdown set some status information/flags that prevent the phone from charging.
Have you any idea what i can do to fix the problem?