i have a problem in my prophet.
when power on after startup logo stuck in colors line..
i try to upgrade but phjone not connecting with the pc i clean pcb even change usb charging socket but no result foun .....
Related
I have a mda compact which when the battery is inserted reads "serial v1:2"
nothing else happens unless the usb cable is conected then the screen changes to "usb 1.2". and the pc says unidentifiable device present and dosen't sync.
any help apriciated ! mda is other wise in as new condition.
The red led iluminating breifly when the usb is conected.
UPDATE
The mda compact was showing no indication of charging with just a red indicator from the led for 2seconds when the charger was pluged in.
When conected to the PC the screen changed from serial to usb, how ever would disconect after a while and was unable to conect to the mda via the usb as not recognised.
After leaving to charge for a night, with no indication of charging, the MDA did not then self disconect from the PC and so the battery must have been flat !
Was then able to down load the "1.13 T-Mobile rom" on to it from the upgrading link and now all is well.
Still don't know why it was stuck in bootloader mode ?
This morning I tried to flash bikertibi's WM6.5 ROM.
In the middle of flashing, the connection was lost and now my phone is stuck in the tricolor bootloader screen.
the weird thing is that the screen keeps flashing? is like it keeps restarting every 15 seconds or so. So it can't retain a connection with my computer long enough for me to do anything.
when i take out the battery and leave it for a while before placing it back, it could hold the connection for a longer period of time (but not that long. probably for a minute?).
i can't figure out what is the problem. I've changed the USB cable and still no change. could it be the battery has problems or is it a hardware problem?
many thanks to anyone who could help (tho i'm not optimistic since this part of the forum seems quite dead)
well
Now...this is vry important ...... plz do at ur own risk...
remove the battery
Cut ur data cable (USB) and u'll find a white wire in da bundle of wires ... connect it to the battery plug near the camera
All the others , u connect to the last plug...(there are 6 plugs for putting battery...do not connect to the middle ones)
now connect the USB cable to ur "xp" pc.
the pc will recognize the device and start syncing...
run the rom u want AFTER COMLETING SYNC ... It is sure to succeed ...
plz if any thing happend let me know
cscheng:
I losted a lot of times comm upgrading Roms and NOTHING HAPPENS! (sorry for screaming...) Try to search some info at forums but....
-Try to close your upgrading soft (PC)
-Switch off-on your phone
-Connect usb cable again and try to upgrade now.
(maybe it refuses 2 or 3 times the upgrading, but I was trying and after 4 times it was like ever!)
Please, make it as your own risk.
Good luck friend!!
I have same Problem PLease Help
Have S200 G3 in Tri Color screen that gets to 50% on ROM load before it starts shutting off n on. It does the same thing if it is plugged into a pc via usb cable w/ battery installed after a short period of time.
It does not turn off n on it it is simply sitting there w/ the battery installed. Only when it is plugged in w/ a USB.
Does some 1 have access to info on phone recovery via flash card and Rom that I can use.
If not steps on resolving the problem long enough to load a basic Rom on the unit.
cscheng said:
This morning I tried to flash bikertibi's WM6.5 ROM.
In the middle of flashing, the connection was lost and now my phone is stuck in the tricolor bootloader screen.
the weird thing is that the screen keeps flashing? is like it keeps restarting every 15 seconds or so. So it can't retain a connection with my computer long enough for me to do anything.
when i take out the battery and leave it for a while before placing it back, it could hold the connection for a longer period of time (but not that long. probably for a minute?).
i can't figure out what is the problem. I've changed the USB cable and still no change. could it be the battery has problems or is it a hardware problem?
many thanks to anyone who could help (tho i'm not optimistic since this part of the forum seems quite dead)
Click to expand...
Click to collapse
Provide better break down, if possible w pics of actual steps. Ex. I don'd understand what you mean about the white wire and middle conectors in battery section. Only allow the other 2 to connect or ???
Dr.Thrax said:
well
Now...this is vry important ...... plz do at ur own risk...
remove the battery
Cut ur data cable (USB) and u'll find a white wire in da bundle of wires ... connect it to the battery plug near the camera
All the others , u connect to the last plug...(there are 6 plugs for putting battery...do not connect to the middle ones)
now connect the USB cable to ur "xp" pc.
the pc will recognize the device and start syncing...
run the rom u want AFTER COMLETING SYNC ... It is sure to succeed ...
plz if any thing happend let me know
Click to expand...
Click to collapse
I will tell the whole history just in case, it might be relevant.
It started with battery problems, it was charging at a very slow rate (4-5 hours) and it was lasting 1 hour top. The camera was the cuplrit, it wasn't working at all and by disabling the camera app the phone worked fine for a week.
Suddenly stopped charging now.
When the phone is on it doesn't recognize the charger not even the computer, no bottom led. The computer doesn't recognize the phone either.
When the phone is off, if i connect the charger, the bottom led turns red for a second, SONY logo appears, battery appears for another second and reboots... infinitely.
I thought that the USB connector was the problem but i can connect it to my laptop in fastboot mode and flashmode, the phone is recognized in both modes, i even "repaired" the phone with Sony PC Companion and i'm having the same problems like before: no camera and no charging.
I don't think it is a firmware problem, i've re-flashed two stock firmwares from XPERIA Firmware website and no success.
Any ideas? Thanks in advance!
Dude I have the exact same problem. Would like to find out a solution
Could be a hardware problem.
charging problem
I will tell the whole history just in case, it might be relevant.
i used power bank to charge my phone,Suddenly stopped charging now.
When the phone is on it doesn't recognize the charger not even the computer, no bottom led. The computer doesn't recognize the phone either.
It is charging properly with power bank always but not with charger and computer with usb. if i connect the charger, the bottom led turns red for a second, SONY logo appears, battery appears for another second and reboots... infinitely.
I thought that the USB connector was the problem but i can connect it to my laptop in fastboot mode and flash mode, the phone is recognized in both modes, i even "repaired" the phone with Sony PC Companion and i'm facing the same problem still.
Any ideas? Thanks in advance!
Facing Same Problem, I have even change the New Port for charging.. but after 2-3 weeks as usual.. slow like Hell...
Help US
When the charger is connected the red notification light comes up , Sony logo comes up and within an fraction of second the screen goes blank. And again the Sony logo comes up and again it gets gets blank. This continues until the charger is plugged in. Similiar situation happens while the device is connected to pc via usb. Have changed the cable, changed charger, changed ports, tried every type of available reset options. Nothing worked. The device is dead.
Cannot flash the device because it gets disconnected and connected by itself. Any solution please??
So i´ve bought a pixel with a damaged charger board and after i replaced it the phone crashed during first boot due too the battery beeing discharged, now it doesnt boot at all.
I sometimes get it too show the charging screen after having it connected to a pc or charger for a while, if connect it to a pc afterwars it shows up as "unkown usb device with an error (Code 43)" in device manager.
Any ideas how i could revive it?