Database Info

ROM 1.06.116WWE

this afternoon i found an update on the swedish qtek site.
http://www.qtek.se/default.asp?nc=4484&id=127&element=0
wonder if it could be used by english speaking users? it says WWE, so i guess it is in english?
i'm uploading the unpacked installation folder to FTP now. maybe someone who knows his thing, could magic a .bat file with the correct checksum to change the carrier and language? [pinoo? ;-)]
the file is called: MA_Qtek(BrPt)_10600_116_10500_SHIP.zip

Hi there..
I will take a look... But my device is with PocketPcTechs at the moment... Getting 128MB RAM ... WOOOOOOOOOOOT
:lol:
Cheers

has anybody yet found out what the passwords for the rom files are?
btw, have the last ones (the imate rom for example) been cracked or did anyone blurt out the right keys?
cu

A bad traduction :
Click on the links below in order to update your Qtek S100. Follows installationsguiden careful in order to few a correct updating.
ROM 1.06.116WWE
(updating from ROM 1.03.148WWE to ROM 1.06.116WWE)
The updating is only for Swedish sold Qtek S100 with software version 1.03.148WWE. In order to check which version you have pressures Start>Settings>System>Device information, you find the information on ExtROM version. If you try to update with another version of software can the to damage your Qtek S100.
The updating ROM 1.06.116WWE contains:
GSM-radio software
MMS client (2.0.0.20)
Caller IDS
Phone PAD Swedish T9
Updated Blåtandsmjukvara
Installationsguide ROM 1.06.116

actually it was pretty clear that qtek only offers their support to their respective customers. Nevertheless it should be quite possible to gain advantages out of an alien fw ;-)

...so it could not be used for I-mate JAM and other models.... :roll: If someone has updated the firmware pls report the "improvements"...
Regards,
Primoz

Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !

taron said:
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
Click to expand...
Click to collapse
That would be very nice!
Regards,
Primoz

Anyone upgraded yet?
Hi, has anybody yet tried out the new QTEK ROM 1.06? If so, could you be so kind to make a ROM image and put it onto the ftp? Guess that'll be way easier than finding out some passwords to change the update-files?
thank you!

Why couldnt this be installed on non-swedish qtek s100?
Seems like an normal english rom-update
Wonder what it is with the bluetooth.
Cause the stack that is installed now is way to slow.

We need the passwords so xda3nbftool can be used to change operator id. Then we get past the Country id error...
So if anybody know the passwords that would be nice...

it cant be used out-of-the-box because the upgrade tools checks for your device-id, the carrier-id (which must be the one of qtek), the language (which, as you've said would fit) and the rom versions.
Thus, at least the carrier id would be different which is enough for the upgrade prog to abort. So there are 2 work-arounds:
1.) using xda3nbf-tool which requires the rom-passwords to decode the rom, change the parameters which are checked and re-encode the rom. Unfortunately anybody knows the passwords yet
2.) do a rom backup of a succesfully upgraded qtek-device with the bootloader-method which gives you *one* file that contains all the radio, the ext-rom and the os rom. This file needs to be modified by a hex-editor (which actually means to replace the first 412 bytes from the qtek-backup with the first byte of your own backup) --> restore the edited file et voilà: it should work. Unfortunatly anybody has posted such a backup yet...
conclusion:
way 2) is easier (at least we dont need any passkeys) nevertheless we still need that backup...
regards,
André

sorry, my upload was broken... should be ok now. the file is called MA_Qtek(BrPt)_10600_116_10500_SHIP.zip and you can find it in the Magician folder on the xda-ftp. it's basically just the unpacked installer.
could anybody tell me how to write a proper .bat file, like the one pinoo did for the i-mate rom? i suppose i need to change the 0x20040522... numbers to stop the installer giving the "invalid checksum" error?
...and reading the last post these numbers seems to be the passwords Guest was talking about...
any chance of getting them?

Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((

BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).

landau said:
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
Click to expand...
Click to collapse
Just upgraded my Imate Jam radio stack to this one and seems that it improved phone sound quality a lot or am I just hoping so ?!
However no problems with upgrading the radio stack only!

Hello,
landau said:
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
Click to expand...
Click to collapse
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks

macrinus said:
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
Click to expand...
Click to collapse
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe

WM 5.0 1.62c.07CHS rom

this new WM 5.0 1.62c.07CHS rom version have been upload to ftp site
/Uploads/Himalaya/Uploads2005/WM5_SDimage_1.62c.00CHS_PS_128RAM_nocert_Hima_SimChinese.rar(SD IMAGE)
or
/Uploads/Himalaya/Uploads2005/WM2k5_1[1].62c.07CHS_XDA2_HIMALAYA_SimChinese.rar(NBF FORMAT)
/Uploads/Himalaya/ActiveSync4.1_build4807.rar(activesync4.1)
-----------------------------------------------------------------------------------
-please use ActiveSync 4.1 or latest
-use it with ur own risk.
-original by buzz_lightyear,toenailed,ljm2020

ljm2020 wrote:
the main improvement is the speed! FASTER
camera application still don't work as should be
there are still no MMS related application and setting...
about the SIM toolkit:
1,there are two shotcuts, one is "SIM Tool Kit" it works, but the another one:"SIM Toolkit" doesn't work, just has no responsed when clicked
about the SIM manager:
You can't fount the shotcuts of it in the program list, but you can copy the phone number to SIM from the contact menu, So I still installed the Asukal SIM Manger.cab
PS:the clock program is changed I think, see the sceenshot of Today
Click to expand...
Click to collapse

Hi Chewziqin,
Do you get the Ramdisk work?
I tried few times, but every time after reset, it become blank.

what's the ftp full path?I can't got it....

take a look here ,FTP site.
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
i dint try the ram disk yet

Can dopod 575 use this rom ??
Can dopod 575 use this rom ??

Re: Can dopod 575 use this rom ??
blackbear_cn said:
Can dopod 575 use this rom ??
Click to expand...
Click to collapse
no , only for xdaii

oh!faint!
Thanks!
Where can find wm5.0 rom that is for dopod 575?

Code:
pschoch wrote:
For all noobies wondering which WM5 ROM to use:
Code:
ROM PS Storage Program ExtROM Ramdisk
------------------------------------------------------------
1.50i.32 NO 96MB 32MB 16MB None
1.50i.64 NO 64MB 64MB 16MB None
1.50i.96 NO 32MB 96MB 16MB None
1.60a YES 14.57MB 120.32MB 16MB None
1.60a YES 30.xxMB 120.32MB None None*
1.60b.96 YES 14.57MB 88.33MB 16MB 31.42MB
1.60b.96 YES 30.xxMB 88.33MB None 31.42MB*
1.60c.00 YES 14.57MB 120.32MB 16MB None
1.60c.00 YES 30.xxMB 120.32MB None None*

i din try any ram disk

sos! i can not download it
plz send it or it's url to me
thx
msn:[email protected]
email:[email protected]
QQ:115667376

OK 了
download all night ,so get wm5 chs from http://buzzdev.net
thx again

Plz guys we need a full English translation for this version
THANKS

I have something wrong with the Sync...it can connect...but just can't sync....

just use the latest active sync,look at microsoft home page.
or
just soft reset n connect again

Hi, Thanks for the reply. BTW I'm also using the latest ActiveSync... i did the both way as well..but still cannot..
Is that anything to do with Chinese ROM and Outlook 2003? Cause when I sync..the ActiveSync show ??? at the Contact

Blue Angel
does this rom work for Blue Agnel device (PH20B)? Thanks.

kli said:
does this rom work for Blue Agnel device (PH20B)? Thanks.
Click to expand...
Click to collapse
it only work for himalaya

Greetings, I m new in flashing ROM. Can teach me how to upgrade my Himalaya from WM2003SE to WM2005? I m not sure abt the steps.
Thx in advance.

Bro..u should do some searching........before u ask..

New Release: WM5 - ROM Kitchen

This is the old RK... I'm working on the new one...
Please go to: http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=23392&catid=64
<<< Big thanks to mamaich for his tools >>>

Great Thanks :lol:

WM2K5 ROM KITCHEN
Hardware buttons : Camera and rec don't work
In settings / Buttons you don't find the buttons to set different app.

Great job bepe keep working
The bug with buttons is very simple
go to registry key
\HKLM\Software\Microsoft\Shell\
and add key "Keys", then go to
\HKLM\Software\Microsoft\Shell\Keys\
and add key "40C1", "40C2", "40C3" and "40C4"
Thats ALL
P.S.
40C1 - calendar, 40C2 - contacts, 40C3 - record and 40C4 - camera

Re: WM2K5 ROM KITCHEN
f.cervera said:
Hardware buttons : Camera and rec don't work
In settings / Buttons you don't find the buttons to set different app.
Click to expand...
Click to collapse
As a workaround extract the attachment into DEV\OEM\ and rebuild. I compiled it for the German AKU2.0 ROM.
Tnx Bepe for your great work!
df2jh

IIWPO integrated into Himalaya ROM
Bepe offers us the great option to integrate this well-known theft protection into our ROMs.
Just extract the attachment into DEV/OEM. Open 97bd8b8c-5fe5-4bb1-8ede-f55865d7baf8.rgu with wordpad. Put in your name as you will enter it in the 'Owner Information' as well as a MSISDN to where short message should be sent in case somebody modifies the 'Owner Information'. Rebuild.
Works as is only on German devices. Modify '\Windows\Autostart' in initflashfiles.txt to appropriate folder name of your language (e.g. '\Windows\Startup' in WWE).
df2jh

Is this method designed for the Himalaya only, or would it work for the Universal as well?

I need some help to make DEV and ROM packages for Wizard (I've never used a Wizard)…
Maybe there is somebody there who already used mamaich’s tools to edit a Wizard ROM?
@thefunkunfaked
Sorry,
only Himalaya for the moment, next will by BA and Wizard.
Universal will by last because of the VGA resources (those make thinks difficult).
@df2jh
Wow.. great thanks, you are the first one building packages.
It’s the first time I hear about IIWPO nice app.

bepe said:
I need some help to make DEV and ROM packages for Wizard (I've never used a Wizard)…
Maybe there is somebody there who already used mamaich’s tools to edit a Wizard ROM?.
Click to expand...
Click to collapse
Bepe: let me know how to make it , I will make it for you , PM me,
I had dump rom for Wizard , it used mamaich's tools . if I am right just replace each files for Himalaya right ps which rom you want for base ?
I had dump ruu_prodigy_1081002_104_10910_tmo_usa_ship
thanks.

Re: WM2K5 ROM KITCHEN
df2jh said:
f.cervera said:
Hardware buttons : Camera and rec don't work
In settings / Buttons you don't find the buttons to set different app.
Click to expand...
Click to collapse
As a workaround extract the attachment into DEV\OEM\ and rebuild. I compiled it for the German AKU2.0 ROM.
Tnx Bepe for your great work!
df2jh
Click to expand...
Click to collapse
Is it possible to have the same for WWE AKU 2.3 rom ?
And again thanks to Bepe and all who contribute to this.

hi,Bebe,, very interesting and i am trying to make CHS 2.2 now.
all of them are perfect!
*Extract the DEV folder
*Extract one ROM to DEV
*Extract one OS to DEV
*Extract one LOC to DEV
*Extract all OEM Packages you need to OEM
*Run CreateOS.exe and click the button
*Run CreateROM.bat
and created the ROM nk.nbf!
Great! but this time i didnt make OEM addtional coz my initial test.
The i tried to Flash on to my Himlaya, now runnning
2.01a64MB WWE,
But when try to Flash,,country ID error was happen,
Before it never happen to me.
So i tried to change Country ID but still error.
Then tried to Flash another CHS ROM on to mine,
it can done.
Used same upgrade utility.
Do you have any idea why i can not flash?
Thanks,

Hi Asukal,
Have you tried HimaUpgradeUt_noID.exe?

bepe said:
Hi Asukal,
Have you tried HimaUpgradeUt_noID.exe?
Click to expand...
Click to collapse
oh! now i can flash.......
thanks,

now i could flash and boot,
then came to "Screen Setting& Copy write (C)1996-2005" with sound.
After that, Stylus and Hard Button didint work,
so can not go ahead from this screen! :lol:
Dumped nk.nbf and checked drivers and files.
seems there.
whats wrong with me,,??
i created this rom too rush instantly.
should do carfully...i knew..
any way, i wll try with Mr,mWang made ROM tommorow.
Now 6:00 morning here.
i gonnna sleep!
Thanks!

You are right there is a problem...
...I'll try to find that.
Don’t have much time at the moment and I don’t have any idea why CHS reacts not the same way as the other packages any help is welcome.

bepe said:
You are right there is a problem...
...I'll try to find that.
Don’t have much time at the moment and I don’t have any idea why CHS reacts not the same way as the other packages any help is welcome.
Click to expand...
Click to collapse
Not only CHS also CHT too.is possible wince.nls different with others package ?

hi bebe
i am cheking each files, hope i can find some hints.

Hi There
i make the arabic Rom based on the 2.3 wwe and it work perfect i add somme other application on it from the eten resco keybord speed dial and ....
but i have sometimes that the pda hang and the are no way only the reset to solve it
i am checking the file too to know whats happand
but great job Bepe as usual
Sacaman

ActiveSync like WM2003?
My device now will be recognized as "PocketPC USB Sync" when connected via USB. That ´s the way WM2003 did it. It´s faster and more reliable than the WM2005 method via netwotk connection "Windows Mobile-based Device" and TCP/IP. Great, how did you manage that?

but we lose the network connection on it
now i can't surf on internet or connect the msn true the activesync
if somme one do it please advice
Sacaman

Let's all try to fix the charging issue..

... since this problem is bugging us with aku3.x and crossbow roms.
Especially with the crossbow rom, this seems to be the only problem. The other issues are already fixed, or are easy to get fixed (since they have already been fixed in earlier roms).
In addition to this, I think that if we work together we have greater chances of solving this frustrating issue.
So this is what I have tried (with no success):
1) replace the battdrv.dll with one from a prophet
I get the common result where the device will charge only when you softreset with the cable inserted. You also get a square in the "Model No" in device information (Module address conflict?) Someone solved the square issue in an aku 3.x rom. I would like to know how it was fixed.
2) replace the battdrv.dll with one from an HTC artemis
No charging/status indication. Model No is reported as "WIZA200"
3) I unloaded camera and keyboard driver to see if there are any conflicts with them - no difference

andrew_sh said:
... since this problem is bugging us with aku3.x and crossbow roms.
Click to expand...
Click to collapse
A possible way is to write a wrapper for the batterydriver, which logs information and try finding the differences in pnp, etc.. between a working rom and a non working rom with the prophet-driver.
You could try following too:
- don't touch the batterydriver in original aku3-rom
- do following while device finished boot and os is running:
- copy battdrvr.dll from prophet and rename it to \windows\battdrvr_New.dll (into the new rom)
- change the registry-value HKLM\Drivers\BuiltIn\Battery\Dll = battdrvr_New.dll
- wait some minutes and do a softreset
-->it will not survive a hard-reset, but i guess this could solve module-overlapps..
hope this helps,
ikarus

ikarus said:
A possible way is to write a wrapper for the batterydriver, which logs information and try finding the differences in pnp, etc.. between a working rom and a non working rom with the prophet-driver.
You could try following too:
- don't touch the batterydriver in original aku3-rom
- do following while device finished boot and os is running:
- copy battdrvr.dll from prophet and rename it to \windows\battdrvr_New.dll (into the new rom)
- change the registry-value HKLM\Drivers\BuiltIn\Battery\Dll = battdrvr_New.dll
- wait some minutes and do a softreset
-->it will not survive a hard-reset, but i guess this could solve module-overlapps..
hope this helps,
ikarus
Click to expand...
Click to collapse
Thanks for the info.
I just tried it.
Result:
I get the square in the device info.
No charging/no battery status.
Strange isn't it? I wonder why the model no gets f**d up.

To my knowledge, "usbfn.dll" is involved as well, so maybe you gotta play around with that one as well...

MusicMike said:
To my knowledge, "usbfn.dll" is involved as well, so maybe you gotta play around with that one as well...
Click to expand...
Click to collapse
I tried replacing this file. The result is that activesync stops working completely.

MusicMike said:
To my knowledge, "usbfn.dll" is involved as well, so maybe you gotta play around with that one as well...
Click to expand...
Click to collapse
i do agree.. don't know which dll's, but maybe there are more dll's used for battery..
There is a tool called depends or similar, which can figure this out..
depends is part of free eVC++ (\Program Files\Microsoft eMbedded C++ 4.0\Common\Tools\depends.exe)
ikarus

ikarus said:
i do agree.. don't know which dll's, but maybe there are more dll's used for battery..
There is a tool called depends or similar, which can figure this out..
depends is part of free eVC++ (\Program Files\Microsoft eMbedded C++ 4.0\Common\Tools\depends.exe)
ikarus
Click to expand...
Click to collapse
ahh, thats a handy tool, thanks for the tip !

attached is a cab which could fix this issue.
my contribution to the great work of our rom-cooker
ikarus

ikarus said:
attached is a cab which could fix this issue.
my contribution to the great work of our rom-cooker
ikarus
Click to expand...
Click to collapse
Thanks ikarus, i'll try tomorrow.
So have you tried this? Did you find out what was causing the problem?

andrew_sh said:
So have you tried this?
Click to expand...
Click to collapse
MusicMike tested it, but it needs more testing hehe
andrew_sh said:
Did you find out what was causing the problem?
Click to expand...
Click to collapse
not yet... in part yes, but i don't want to write explanations which could turn out to be wrong...

I'm back, testing it now

Jesterz said:
I'm back, testing it now
Click to expand...
Click to collapse
Welcome back! hehe damn it's been a long time

HELP
okay i have the japnease wm6 rc7 both files its all in jap appantly the battrey issue is fixed and all the other problems can someone help me to convert the language into english and then i can test on my prophet we may have a fully working wm6 rom here guys please need help for final stages.

WM6 100% working on prophet
Hi i just installed wm6 rc7 and i can confirm usb charging and sound all works on prophet flawlesly i need a hero to covert the language into english please can someone help

c3l5o said:
so I was just wondering what does the app change in my phone to make it work... I didn't eve have to soft reset it once...
Click to expand...
Click to collapse
jutley said:
Hi i just installed wm6 rc7 and i can confirm usb charging and sound all works on prophet flawlesly...
Click to expand...
Click to collapse
great. i have some thoughts about the cause, but i don't have an verified explanation for the cause.
Actually i don't have enough time to do more investigation for... So i can explain what the cab is doing.
It's a very slight solution.
The cab creates a notification for the "Notification Broker", which in turn starts XDADev_BatFix.exe each time usb gets connected.
(That is there is no extra thread running, there is no dll loaded, there is no system service running and no extra resource needed. It is almost like before.)
XDADev_BatFix.exe does only set a PowerEvent and exits afterwards.
that's it.
Best regards,
ikarus

anyone sucess pls post...
i'll try tomorrow

ikarus said:
great. i have some thoughts about the cause, but i don't have an verified explanation for the cause.
Actually i don't have enough time to do more investigation for... So i can explain what the cab is doing.
It's a very slight solution.
The cab creates a notification for the "Notification Broker", which in turn starts XDADev_BatFix.exe each time usb gets connected.
(That is there is no extra thread running, there is no dll loaded, there is no system service running and no extra resource needed. It is almost like before.)
XDADev_BatFix.exe does only set a PowerEvent and exits afterwards.
that's it.
Best regards,
ikarus
Click to expand...
Click to collapse
Ok thanks ikarus! Really is a smart and slight solution
guitarz said:
anyone sucess pls post...
i'll try tomorrow
Click to expand...
Click to collapse
It IS working indeed

This fix tested and working on Qtek S200! Its one of the 2,2 clean roms from a few months ago. The battery problem has been my biggest annoyance! Thanks!

I also tried XDADev_BatFix on my 818Pro with AKU3.3-Jester-b1 ROM.
Looks like it really solve the battery charge problem.
Thanks ikarus!

Worked
It Worked on I-mate JamIn, Thanks.
some times the device do not wake up after it sleeps

error 244. when i flash my rom with CustomRUU.What's the matter?

helloooo,everybody
i used ImgfsTools 2.1rc1 and followed bro Tadzio's introduction to cook my rom based on helmi_c's rom~
everything goes well
after NBMerge, i used dutty's tool to generate the os-new.nbh
and flashed it with pof's KaiserCustomRUUv1
but just 1%,my device rebooted and the KaiserCustomRUUv1 tells:
error 244: INVALID MODEL ID
it was still though i didnt modify anything in 'dump' directory
if i flash helmi_c's rom directly,that would be successful
what's wrong i have done? any tips?
forgive my broken Englsh pls...
REGARDS
Sheng

did you flash HardSPL to your Kaiser first?

heh... I had the exact same problem as yours (invalid model id). Using HTC Rom tool, I forgot to set Kaiser as the target ID for the nbh & it defaulted to hermes (I've since edited the ini file to change this).

yea.
i've got HSPL already and i have flashed the other roms many times, thats no problem.
fortunately that error just made my tytnII reboot and i can enter today screen,nothing change at all.
regards
Sheng

i believe your question was just answerd above and i also take it as SLEUTH getting a kaiser? thats cool man welcome to the new club house

woohyuksheng said:
helloooo,everybody
i used ImgfsTools 2.1rc1 and followed bro Tadzio's introduction to cook my rom based on helmi_c's rom~
everything goes well
after NBMerge, i used dutty's tool to generate the os-new.nbh
and flashed it with pof's KaiserCustomRUUv1
but just 1%,my device rebooted and the KaiserCustomRUUv1 tells:
error 244: INVALID MODEL ID
it was still though i didnt modify anything in 'dump' directory
if i flash helmi_c's rom directly,that would be successful
what's wrong i have done? any tips?
forgive my broken Englsh pls...
REGARDS
Sheng
Click to expand...
Click to collapse
Better than dutty's NBH tool, get the Dark Simpsons tool here with Kaiser support...
http://forum.xda-developers.com/showthread.php?t=311909
Cheers.

austinsnyc said:
i believe your question was just answerd above and i also take it as SLEUTH getting a kaiser? thats cool man welcome to the new club house
Click to expand...
Click to collapse
Thanks.... the Hermes was getting too reliable (boring)

Seems thats also now the case with the Kaisers lol... Tazdio's tools work great now after about 2 weeks of flashing roms that didnt work lol...

Oh I dunno... that pesky gps acquisition bug needs fixing and the PIE scroll freeze issue is a cooked in only patch so far. Tadzio is going to send me an updated toolset too itnf hopefully.... I'm itching to flash up a quick personal version with reghacks/PIE fix & maybe a different External GPS app. I may even adapt the hermes GPS RIL shim to express the Kaiser GPS on COM7 so the hermes external GPS applet can handle it.

so that scroll freeze issue in PIE doesn't just happen to me?! what a freakin relief!!!!

It's a real PITA for sure.... I've tried to make a cab to fix it but my initial attempt trashed my phone's RIL for some reason. I'll look at the dependencies more soon...