Hi all,
My s100 refuses updating and stops after 37% in the second stage.
The first stage completes normally.
But the update process stucks after 37% and finally gives an update error after a looooong time.
Does anyone knows what this could be?
regards,
GTEK
reflash your device
Press the camara/power/reset button at the same time you will be in boot mode connect you device to the cable and reflash your device again.
I had the same problem and tried it again the second time went all oke.
Sometimes if you flash your device it will hang but dont worry if you press al the buttons and your in boot mode you can always reflash your device no matter what.
It's always a good idea to disable radio before you update any ROMs. I had this Problem with a MDA I, because I got a call during Update.
Related
My rom update did not fully complete because of an interruption I had and now the phone does turn on but into a white screen anyway to fix this or is there anyway to get the phone to at least to boot so the pc could notice it and i can finish the rom update.
Its a SDA T-Mobile
Or how do i get my sda to go into a boot loader mode?
I read the same problem with you in other forum ... and finnaly he have to send back the phone to T-Mobile.... I'm afraid thats happens to you ...
what ever came of this?
I have a Qtek S200 and have been using the Prophet_Orange_UK_Rom. I decided this morning to revery back to my initial upgrade PDAMobiz_Prophet_WM6_V1.00 Rom. However in the middle of the update process in step 2, something happened which caused the update to fail.
No my qtek starts and gets stuck on the boot screen where you see the orange logo and IPL, SPL etc... info. When I plug the usb cable, there's no message from my computer (and no ack from activesync) but the power led shows it's charging. Any ideas as to what I can do? I've tried hardware reset several times and after saying Format is completed!, I end up with the same stuck-up boot screen.
Thanks for your big help!
done it
sorry for the bother. Was doing hardware reset with both cam and comm buttons pressed. Did not know about boot reset with comm button only...
hi, may i know what you did after you went to bootloader?
my dopod 818pro just struck at the three color screen.
pls help.
I read Wiki, reflashed ROM. Now ok.
Hi all,
my first post, am helpless with very specific problem, tried hard all night and read many threads...
After failed rom/radio update (abborded as error 114 when starting update at 0%), device got stuck in bootloader.
Found out I can only reboot device by shortly opening and closing the battery cover. Thereafter press ON-button --> reboot --> the usual T-Mobile software installs --> automatically initiated softreset again ends up in bootloader.
Only way is to take off the batt. cover again right before T-Mobile software installation. Device then works without T-Mobile Software and ROM is accessible. But still every softreset leads to bootloader screen, also the softreset after running a SpriteBackup-File etc.
Tried every ROM-Update (and even downgrades) I could find (http://www.inntalinfo.de/apboard/thread.php?id=3373), especially "MDA compact_TMDE_11301_129_11200_Ship.exe" from t-mobile.de again and again with device nicely connected to PC via ActiveSync before. Updates never exceed 0%... --> allways error 114
Do I use rong updates or is something wrong with the softreset function?? Please, how can I solve this?
MDA compact, T-Mobile
R 1.123.00
G 1337.42
D 1.13.01 GER
bootloaderscreen says v1.02
this happened to me 2 m8... glad i'm not alone... i'm just about to upgrade the rom, i think it'll work... did you do the first upgrade, the one that f-ed it up, under vista?
Hi everybody!
Been searching for this problem on google and on this forum, but i can't find an answer to this
It's like this that i've installed wm 6.5 on my prophet, everthing was fine!
The problem was when i was trying to install another keyboard layout it restarted, and then it got stuck at the "splash screen" with the Qtek logo.
I did an Hard SPL, nothing happened.
After that i tried to boot into bootloader, everything was fine, i saw the three color screen and i started to install a new clean copy of the WM 6.5..
Everything was fine, it went to 100%, but when it was at 100% the device shutdowns.
When i tried to start it again i got into the three color screen again, and after about 7 seconds it restarts, and it starts in the three color screen...
Please help me..
Please... I really want my phone to get back to normal...?
try to connect the USB and run WM5 Rom.
The same problem..
I have the same problem after try to flash rom to my 818pro.It's still reboot into 3-color screen.How can I do??
Try flash this rom: RUU_Prophet_220734_2207114_024721_NVID.exe
from: http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Michal
I own an Asus P320 WM6.1 device. In the morning, when I reset my phone, it got stuck at "welcome" screen. It just wouldn't start. I tried it several times and waited for a long time for it to load, but in vain.
I then though I might as well flash it as I had had the ROM I was using in my memory card(P320 WWE V4.15.0), but always got the "init sd download fail'. As the last resort, I thought of flashing it to WM6.5 ROM that I had used before. It flashed successfully, but now it gets stuck at the bootscreen, showing the version number. I tried flashing a couple of times with different WM6.5 P320 compatible ROMS(including hdubli's), but the result is the same.
Have I bricked my phone? My phone responds to soft reset on poke and all I can see is the asus bootscreen. Please help!!
sry my english its not so good , but have you reflash the original ?
You mean do a factory reset(cold boot)?
Well I cannot do that as I cannot start my phone. It gets stuck at the screen where it shows Asus logo with the version of the ROM currently in use. As stated before, I however tried to flash it using the latest WM6.1 ROM available on the Asus website(I had it in the root of my memory card), but got the problem of "init SD download fail".
What do I do??
Edit: I also tried hard reset. It asks me two options:
Press [Send] key to restore
Press [End] key to exit
When I press the send key(call button), I get the message "cold boot start". After a couple of seconds, the ROM version number overlaps this message, and it gets stuck.
Does no one have a solution for this? Please help. I am without a phone right now.