Related
this afternoon i found an update on the swedish qtek site.
http://www.qtek.se/default.asp?nc=4484&id=127&element=0
wonder if it could be used by english speaking users? it says WWE, so i guess it is in english?
i'm uploading the unpacked installation folder to FTP now. maybe someone who knows his thing, could magic a .bat file with the correct checksum to change the carrier and language? [pinoo? ;-)]
the file is called: MA_Qtek(BrPt)_10600_116_10500_SHIP.zip
Hi there..
I will take a look... But my device is with PocketPcTechs at the moment... Getting 128MB RAM ... WOOOOOOOOOOOT
:lol:
Cheers
has anybody yet found out what the passwords for the rom files are?
btw, have the last ones (the imate rom for example) been cracked or did anyone blurt out the right keys?
cu
A bad traduction :
Click on the links below in order to update your Qtek S100. Follows installationsguiden careful in order to few a correct updating.
ROM 1.06.116WWE
(updating from ROM 1.03.148WWE to ROM 1.06.116WWE)
The updating is only for Swedish sold Qtek S100 with software version 1.03.148WWE. In order to check which version you have pressures Start>Settings>System>Device information, you find the information on ExtROM version. If you try to update with another version of software can the to damage your Qtek S100.
The updating ROM 1.06.116WWE contains:
GSM-radio software
MMS client (2.0.0.20)
Caller IDS
Phone PAD Swedish T9
Updated Blåtandsmjukvara
Installationsguide ROM 1.06.116
actually it was pretty clear that qtek only offers their support to their respective customers. Nevertheless it should be quite possible to gain advantages out of an alien fw ;-)
...so it could not be used for I-mate JAM and other models.... :roll: If someone has updated the firmware pls report the "improvements"...
Regards,
Primoz
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
taron said:
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
Click to expand...
Click to collapse
That would be very nice!
Regards,
Primoz
Anyone upgraded yet?
Hi, has anybody yet tried out the new QTEK ROM 1.06? If so, could you be so kind to make a ROM image and put it onto the ftp? Guess that'll be way easier than finding out some passwords to change the update-files?
thank you!
Why couldnt this be installed on non-swedish qtek s100?
Seems like an normal english rom-update
Wonder what it is with the bluetooth.
Cause the stack that is installed now is way to slow.
We need the passwords so xda3nbftool can be used to change operator id. Then we get past the Country id error...
So if anybody know the passwords that would be nice...
it cant be used out-of-the-box because the upgrade tools checks for your device-id, the carrier-id (which must be the one of qtek), the language (which, as you've said would fit) and the rom versions.
Thus, at least the carrier id would be different which is enough for the upgrade prog to abort. So there are 2 work-arounds:
1.) using xda3nbf-tool which requires the rom-passwords to decode the rom, change the parameters which are checked and re-encode the rom. Unfortunately anybody knows the passwords yet
2.) do a rom backup of a succesfully upgraded qtek-device with the bootloader-method which gives you *one* file that contains all the radio, the ext-rom and the os rom. This file needs to be modified by a hex-editor (which actually means to replace the first 412 bytes from the qtek-backup with the first byte of your own backup) --> restore the edited file et voilà: it should work. Unfortunatly anybody has posted such a backup yet...
conclusion:
way 2) is easier (at least we dont need any passkeys) nevertheless we still need that backup...
regards,
André
sorry, my upload was broken... should be ok now. the file is called MA_Qtek(BrPt)_10600_116_10500_SHIP.zip and you can find it in the Magician folder on the xda-ftp. it's basically just the unpacked installer.
could anybody tell me how to write a proper .bat file, like the one pinoo did for the i-mate rom? i suppose i need to change the 0x20040522... numbers to stop the installer giving the "invalid checksum" error?
...and reading the last post these numbers seems to be the passwords Guest was talking about...
any chance of getting them?
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
landau said:
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
Click to expand...
Click to collapse
Just upgraded my Imate Jam radio stack to this one and seems that it improved phone sound quality a lot or am I just hoping so ?!
However no problems with upgrading the radio stack only!
Hello,
landau said:
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
Click to expand...
Click to collapse
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
macrinus said:
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
Click to expand...
Click to collapse
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe
Hello, i have done lot of reading there about all upgrades on our Magician's.. So for everyone who is new here to this forum, there is latest update available with easy few steps to upgrade
ROM version 1.12.00 WWE
Radio version 1.13.00
Protocol version 1337.43
ExtROM version 1.12.131 WWE
It's an IMATE ROM, with CZ (Czech) customized ExtROM. so anyone who want to cook his own ROM, just
download this file > http://live61.com/mda/yourownEXT.nb1 and follow Extended ROM steps above
It's complete Dump of my device, including CE ROM, EXT ROM and RADIO STACK. This update flawlessly worked on 3 devices i had in my hands.. So I hope, it will help you with no problems. (no need to change any 440bytes and other 'hacks' found there in forum).
Install is so easy
1. download NB1 file http://dc.live61.com/mda/Imate_WWE_1.12_1.13_1.12.131.nb1
2. write it on your SD card (at least 128mb) with NTRW application - "ntrw.exe write Imate_WWE_1.12_1.13_1.12.131.nb1 g:" (g: as your SD card drive letter)
3. insert SD card to MDA, and enter bootloader with CAMERA+POWER buttons together with RESET
4. after about 8 seconds you will get message with "Sections=2, press Power.." so press Power button and wait until "Checksum OK" message appears. Then reset your MDA
Thats it!
Customized Extended ROM
1. install this plugin to your Total Commander. (restart of PC needed!) http://live61.com/mda/VirtualDisk_1.30b2.rar
2. mount as an virtual image yourownEXT.nb1 file
3. make here your desired changes and unmount it
4. run WinHEX, open modified yourownEXT.nb1 (ouch.. i know, you need this.. http://sweb.cz/ftp1/WinHexSerial.txt)
5. select whole file with CTRL+A and copy to clipboard CTRL+C
6. open Imate_WWE_1.12_1.13_1.12.131.nb1 file, go to OFFSET 2C0019C and write clipboard data with CTRL+B
7. save Imate_WWE_1.12_1.13_1.12.131.nb1 and follow Install steps
If anything goes wrong, please let me know. Good luck. John
im going to try it....
(idem to tam šupnúť...)
i believe i will be able to do it, becouse i was not able to do before with dumped rom on ftp...
Hi
I made a SD card as You wrote.
When I make a HR, I have clear dark screen with "Serial" on the top and "v 1.00" on the booteom of the screen.
What is wrong?
Thanks for help.
howto
@all,
please aid a novice:
-How do I mount "your own extrom" in total commander???
-What and how can I make changes then????
Thanks in advance
kavalir said:
1. download NB1 file http://dc.live61.com/mda/Imate_WWE_1.12_1.13_1.12.131.nb1
Click to expand...
Click to collapse
Recently got a M500 and trying your rom but the link posted my be dead. Can you upload it again. Thanks.
how to upgrade only Radio 1.13 ? i downloaded from ftp
MagicianRadio_1.13.00_maupgrade
currently, i using Qtek1.12ROM for o2mini..
Can i just run the setup file ? then do upgrade only radio part.
Is there a newest rom than mine ?
hi,
i just bought a mda compact with t mobile few day ago,
it look like this
ROM Version = 1.12.00 WWE
ROM Date 05/28/05
Radio version 1.12.00
Protocol version 1337.42
ExtRom 1.12.152 WWE
is anything that can be upgraded ?
and how can i get the 02 active GUI on it ?
or remove the Tmobile one ?
I did try to find the answers elswere but seam to be a tiny bit complex to find out. (probably my english
i used to be able to surf the internet over GPRS for free with the o2 payand go sim card, i still do with the 02 montly thought.
any one know more about it ?
Hi
Problably lots of people already asked this. Believe it or not, I searched the forum and i didnt sow that many information about it. I have a mda compact customized with t-mobile software. Basacly I want to take the T-mobile Stuff out, it dosnt even let me set up a gprs account for another operator.
Any help would be thankfull
Ivo
your best bet would be to get the device unlokcke, ( see the unlock tool in the general section of the forun for the unkocl all in one tool) and then upgrade the rom with that of an imate's or qtek's
hope that helps
Jim
Hi
thanks for quick reply.
I unlocked it already. Its just the t-mob crap i want to get rid off. where about can i donload the roms ?
thanks
found the solution ...
just upgraded it with an original firmware and the no_id file
thanks for the help
Ivo
...and where can i find the original firmware and the no_id file? :?:
I would like to have my Orange m500 clean too! Only with the applications i'd like to use.
Can this only be done with installing those extendedRoms? Its very difficult for me to find a clear tutorial about this.
regards
The ext-rom brands your magician. When you want to get rid of it just
- make a backup of calendar, contacts, tasks etc.
- hard-reset
- folow initialize procedure on screen
- soft-reset as soon as you get the standard WM background & before the customizatiin (=branding) starts.
You need to do this last step after every hard-reset unless you go for BIG Storage & completely wipe-out the ext-rom & get a storage folder of 27Mb instead of 7Mb.
Instructions for BS are to be found on the forum. No need to search for a special rom, you can do it with your current rom.
Cheers, M
thnx @ oltp
I'll give it a try
When I try to upgrade my i-mate JAM to a new special ROM from Kichen after a step this masage apears "Cannot execute the remote comunication program. Plese make sure that the USB/Serial cable is properly connected.
so guys plz help me urgent
Does the same error come up when you flash with a shipped-rom which hasn't been changed?
Does your device respond to any commands from the update program? If so, what happens on your device?
And what did you change in the rom?
As you probably guessed: I don't know an answer to this & i'm trying to figure out what is different in your setup compared to a regular update.
Regards, M
Thanx 2 reply
No dear every thing is OK When I try to update with shiped ROM it works 100% no problem. When I click in my computer the device is located and opens software installs nothing abnormal every thing is as usual, But when I try to update it with special ROM (got from Kichen that I like very much) the folowing masage appears
I guess that romkitchen isn't compatible with magician :-(. You can try to put in the GetDeviceDara.exe from a shipped-rom in the appropriate romkitchen folder, maybe it helps. Cause I love to see this working.
Good luck, M
Let me do it
The rom I got is for windows 2003 SE so I think it should work, now let me act your advise then i'll inform you.
regards
The same problem i have
I try to update one of my friends i-mate JAM in a dfrent PC but the same problem I got. I think the rom is not compatible with JAM. Do you know another ROM to work on my JAM like available in Kitchen???
Well I haven't experimented with RomKitchen & don't know what you want to achieve with it. Ext-roms can be edited with bal666's tool too & there are loads of different (not edited) ext-roms @ the ftp.
& of course there's the BIG Storage hack, with which you trade in the ext-rom for an enlarged internal Storage folder.
Haven't seen anyone yet who really edited the CE image :-(
M
Yes I tried but...
I tried big ROM but in 3rd stage the folowing masage appears "card incilize error" When it tries to back up ROM on SD card. I have MMC not SD Now may be this is cause or somthing other. Have you updated your device with big storage rom & is it OK???
If so I'll try again
I downloaded the ROM form this site http://www.romkitchen.de I updated one of my friends PPC from this site's Rom its performance is 50% increased. but mine (JAM) is not going to update
I did it with a patched shipped-rom :!: Follow this link & I think you should be able to manage http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
RomKitchen is also on this forum, but I think it's for other devices. You can find it in the wiki.
Cheers, M
Ok let me do it
Thanks dear let me download and check it. One thing that my JAM is from i-mate & there is T-mobie ROM, but its for Magician so should I do it no problem? Will I be able to reload its shiped ROM that I have already. sorry for my broken english
Yes it's no problem to use another magician rom, use maupgradeut_noid.exe to bypass country id error. To flash your current shipped-rom back just follow the same procedure.
Be carefull to backup your current ext-rom cabs though, they do contain some operator specific settings for eg gprs, voicemail etc. You need to install some of them instead of the TMO ones present in the TMO 1.13WWE rom. You can use WinCE cabmanager (available on trial) to have a look inside the cabs & decide wich ones to use.
This is my list of the Dutch TMO 1.13WWE ext-rom cabs anyway:
BlueTooth patch:
BTHUSB_PATCH_AKU26.CAB
MMS:
CAB-Acrosoft-MMS-2.5.0.28-ENU-MagicianAKU2.6-13May06.CAB
Needed in combi with MMS (does contain Dutch T-Mobile specific settings though)
CAB-Customization-Magician-TMONL-03Jun05.CAB
Certificates:
CAB-Certificate-TMO-16Sep05.CAB
Email wizard:
CAB-EmailWiz-2.0.0.6-PPC-TMNL-ENU-09Aug05.CAB
Java support (midlet manager):
CAB-TaoJava-10.1.2.76-PPC-ENU-17Aug05.CAB
Caller ID:
Caller_ID_Magician_T-Mobile_WWE_RC22.CAB
Camera & album:
Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB
To hide the ext-rom:
Delete_vdisk_shortcut_WWE.sa.CAB
IntelliDialer (with T-Mobile colors, other skins avalaible on the forum):
IntelliDialer_Magician_T-Mobile_WWE_RC20.CAB
IntelliPad (T9 for Slovak, Polish, Hungarian, German, English, Dutch, Czech):
IntelliPad_Magician_T-Mobile_WWE_RC20.CAB
Remove current PIE favorites:
Remove_Favorites_MA_TMONL_112187.CAB
New battery.dll & wavedr:
THB_MDA_COMPACT.CAB
T-Mobile sim toolkit, theme, sounds, carrierlogo etc.:
TMNL_Customize_113125.sa.CAB
SIM manager:
TMNL_OperatorName_MA112178.sa.CAB
UserAgent settings:
UA_Profile_TMO_Compact1.1.sa.CAB
Start menu customization, Today plugin settings & T-zones:
UXC_Magician_T-Mobile_WWE_NL_RC25.CAB
Set the version to 1.13WWE
Version_WWE.CAB
Zip support:
Zip_Magician_T-Mobile_WWE_RC20.CAB
Success, M
thanx
Ok thanks a lot
regards
Hi everyone, I just got my first smartphone, an AT&T Tilt (HTC 8925) a couple of days ago. I'm happy with it except that I wish it to display Chinese when browsing webpages. I don't need the interface to be Chinese, nor do I need to input Chinese. I just wish when I visit a Chinese website, I'm not seeing blocks.
Don't know if this makes a difference, but either traditional or simplified Chinese would work (I read both).
Searching the whole forum didn't give me much. Probably people had some discussions before, just I didn't find them yet.
I'm totally new on smartphones. Any help is very much appreciated.
info on the phone:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I just flashed the SPL to Kaiser-HardSPL-3.56 following instructions. BTW, which version should I use, 3.56 or 3.29/28?
I did not flash the ROM, b/c I'd like to find out more on Chinese language support.
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Be sure to backup your device before you try. I am not responsible for any data lost. Your might need a hard reset if it failed... But it is the cab that I have been using for English roms for many devices and it will likely work for you too
you shoud find a chinese font file'ttf',and repair reg
try this websit
www.ioicn.com.cn
well.. this is what i use only...
http://www.studiokuma.com/wm/?section=support
1. CE Star chinese
2. Monster chinese
3. Many font + wince.nls + registry mentioned above.
4. My rom (see signature below)
Thank you very much.
I'm now downloading and trying the ways you pointed out.
Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
ctrc said:
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
Click to expand...
Click to collapse
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
jackleung said:
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
Click to expand...
Click to collapse
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
This is what I use to read Chinese website
http://forum.xda-developers.com/attachment.php?attachmentid=37342&d=1176792242
This is what I use to type Chinese
http://www.a4user.com/\A4_down_sip.asp
It doesnt support chinese hand writing input though. If you know of an SIP that supports hand writing input please post here
ctrc said:
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
Click to expand...
Click to collapse
It's hidden file under \Windows. Therefore, must use "show all file" in order to display it.
cproaudio, all listed below support Chinese writing
http://www.studiokuma.com/wm/?section=support
CE star
Monster
I tried installing CE-Star 2.8 Chinese support on the shipped ROM and it worked.
I then flashed the ROM to Jack's cooked ROM and it works great now. Thank you, Jack.
Thank everyone. This forum is great.
Instructions to migrate ATT WM6.1 to Jack 2.6 confirmation
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
mmtea said:
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
Click to expand...
Click to collapse
Wiki is your good friend here: http://wiki.xda-developers.com/index.php?pagename=KaiserIntroductionToROM_Flashing
Hi Jack:
I had already unlock the ATT tilt using unlock code ...Do I still need to run step one below?
1. CID-unlock your device by following the instructions at pof's HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)-thread
BTW, I did get the "white screen" on this phone ... and follow the instructions to :
- 1a. download the 5 attached files
1b. pull out the battery, REMOVE SIM and SD CARDS !! and reinsert battery (this step *is* important)
1c. connect your PC to phone with a USB cable
2. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Thx
White Screen Issue
Hi Jack:
JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
Are these JumpSPL1.56 or JumpSPL1.93 run from PC or the terminal device itself ? How do I run these two ".exe" files in the device ?
Why am I getting White Screen and others devices dont get white screen ?
Thx
mmtea said:
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Click to expand...
Click to collapse
Anywhere. I would copy it to the top level (\). Even if you took your sim out, you can close the phone page (which complaints about sim) by tapping the top right corner or the hardware red button (hang up). Then use "File Explorer", locate the exe files that you copied and click on it.
Hi Jack,
I am new to the Tilt. How do I get to "File Explorer" ? I dont see it on the menu when I open either the "setting" or "programs" ?
BTW, when I run the JumpSPL1.56-KAIS.exe, do I also need to run the Kaiser Hard-SPL v1 again ? what's the right sequence ?
Thx
RESET
Hi Jack:
Is the rest pwer+camera+ "navigation" at the same time to get Tri-colour ?
if NOT, which three at the same time can "reset" ?
Thx