Related
Bought JAFWM yesterday and here is what I have found:
-Tried flashing New Jamin Rom
Result-Stuck in perpetual reset mode most of the time
When I did manage to get out of the automatic reset loop here is what I found:
1. Radio rom was not installed (=no phone, wifi, bluetooth functionality
2. device had incredibly poor response to any commands (severe lag issues)
3. Basic functionality (even without phone) was very bad
-Tried flashing Qtek Rom
Result-similar as imate (listed above)
1. No radio rom
2. device had better response than imate rom but still poor
Flashed back to shipped dopod 818 pro rom
-Thank God my device returned to normal (radio rom was installed this time)
Conclusion:
I don't think JAFWM can unlock CID (based on my exerience)
If their are any JAFWM experts out there please let me know if there is a way to get the radio rom installed with the new ROMS (ie. QTEK,IMATE)
If JAFWM can't unlock the CID than there is no advantage to using this device other than it's user friendly interface (which is quite easy for unexperienced rom flashers)
Still waiting for Dopod's new rom (that seems to be my only answer for AKU2)
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Re: JAFWM-May not be the answer to flashing difficult prophe
rcnomad said:
Bought JAFWM yesterday and here is what I have found:
-Tried flashing New Jamin Rom
Result-Stuck in perpetual reset mode most of the time
When I did manage to get out of the automatic reset loop here is what I found:
1. Radio rom was not installed (=no phone, wifi, bluetooth functionality
2. device had incredibly poor response to any commands (severe lag issues)
3. Basic functionality (even without phone) was very bad
-Tried flashing Qtek Rom
Result-similar as imate (listed above)
1. No radio rom
2. device had better response than imate rom but still poor
Flashed back to shipped dopod 818 pro rom
-Thank God my device returned to normal (radio rom was installed this time)
Conclusion:
I don't think JAFWM can unlock CID (based on my exerience)
If their are any JAFWM experts out there please let me know if there is a way to get the radio rom installed with the new ROMS (ie. QTEK,IMATE)
If JAFWM can't unlock the CID than there is no advantage to using this device other than it's user friendly interface (which is quite easy for unexperienced rom flashers)
Still waiting for Dopod's new rom (that seems to be my only answer for AKU2)
Click to expand...
Click to collapse
Thanks for the feedback, in case JAFWM have some bug, your post will help me to debug it. It would help me also if you could post here your JAFWMLOG.txt , you can find it in same dir JAFWM.exe is located.
But I will check it also myself and will post result here, but sofar i know there are not any problems known until now. However, i have no NEO i will buy one at monday and play little bit. Maybe os not match bootloader or whatever, but let see after i have my NEO.
JAFWM-CAN FLASH DIFFICULT PROPHETS>>>IT REALLY WORK
Thanks TA_mobile
I did as you recommended and it worked!
JAFWM does what it is supposed to do...
Re: JAFWM-CAN FLASH DIFFICULT PROPHETS>>>IT REALLY
Today played little bit with my Qtek s200. I flashed it with with follow roms:
JAMin_WWE_ 2130923_21309112_020720_ship
RUU_Prophet_1001321_10013102_11320_DopodAsia_Ship
I did not unlock any CID before and all functions was normal. I did it with skipped and witout skipped bootloader flash. If any one have any problem with a secific rom, plz tell me and i will test it.
All this tests we has done with the new version (1.3beta) released today. You can download from http://forums.phone-tools.cn/showthread.php?t=9411 and try it.
ta_mobile said:
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Click to expand...
Click to collapse
Hello ta_mobile,
After flashing Dopod ROM into my Xda Neo using JAF without skip IPL/SPL, I got IPL=1.0 and SPL=2.09 and the device stucked at the bootloader mode with 3 colors and could not load the OS. I then flashed Neo with Qtek ROM 2.09 skiping IPL/SPL. My Neo works fine but now I have IPL 1.0 and SPL 2.09, I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????
Thanks
Tamagochi said:
ta_mobile said:
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Click to expand...
Click to collapse
Hello ta_mobile,
After flashing Dopod ROM into my Xda Neo using JAF without skip IPL/SPL, I got IPL=1.0 and SPL=2.09 and the device stucked at the bootloader mode with 3 colors and could not load the OS. I then flashed Neo with Qtek ROM 2.09 skiping IPL/SPL. My Neo works fine but now I have IPL 1.0 and SPL 2.09, I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????
Thanks
Click to expand...
Click to collapse
But what is the reason you want upgrade or downgrade your bootloader? I can not get it :?
Tamagochi said:
...I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????...
Click to expand...
Click to collapse
Hello,
i have an German O2 Neo and sometimes Problems with CID unlocking for Flashing. Start aWizard an use the option "e". Then show on youre XDA and start the enablerapi.cab on youre XDA. At next use aWizard with the option unlockCID and test flashing!
With this Method i can backup my Neo with aWizard and flash the new Jamin ROM, the Qtek ROM not. Rebackup to German ROM also OK but only the OS, the BootScreen (SplashScreen) not.
Sry for my miserable english!
HI all
i have a qtek_S200(HTC Prophet) which is :
IPL 2.09.0001
SPL 2.15.0001
OS 2.15.13.24
GSM 02.17.21
now,i have experienced a big problem like this:
i wanted to change the ROM of my phone to English..then i download a shiped Rom to flash it...
the shiped Rom i used was RUU_Prophet_1001321_100013102_11320_DopodAsia_shiped.exe....
But everytime i tried to Flash, the program said "ERROR(300):invalid update tool..this update utility cannot be used for your PDA phone.please get newer update utillity" when the phone proceeded to a reseting and turned to three colour mode....
So, that is way? someone plz help me..
ThX
jimmy
2nd problem
the qtek S200 is CHT now, coz it ought to be ENG originallly, so it must be CID unlocked sometime ago...
unfortunlly, when i try to backup its Rom to SD card using MTTY by the code" r2sd all", like backing up a wizard' rom....but it said "you don't get the proper security level to download a specific image"..
Then i use the MachinaGod' lokiwizi and RapiUnlocker trying to unlock the CID, but it displays error and seems fail ..
so, guys plz help me ..
THX
jimmy
UP
Guys please help me
another: HOw to dump a ROM of Qtek s200(prophet)?
Hi,guys..
HOw to dump a ROM of Qtek s200(prophet)?
i tried to dump it's Rom using a MTTY, the code i input was " r2sd all", but it said that
Code:
r2sd all
*****user area size=0x77E0000 Bytes
R2SDBackup0-Download type=5
usTotalBlock=1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
So it is fail......
i want to backup it's Rom, then flash it onto other Prophet ...
Anyone pLz teach me how to do...
THX
jimmy
try to awizard 1.2 tool (It's on FTP in wizard folder or upload folder).
thefamous said:
try to awizard 1.2 tool (It's on FTP in wizard folder or upload folder).
Click to expand...
Click to collapse
i have tried but it is no use..
Jimmy:
You will need to downgrade the device to 1.x os.
See my comment here:
http://forum.xda-developers.com/viewtopic.php?p=283140#283140
I will add this to the wiki shortly.
I managed to successfully use the r2sd command after unlocking.
Let me know if you need anymore information.
Thanks
Pete
Rymez2K said:
Jimmy:
You will need to downgrade the device to 1.x os.
See my comment here:
http://forum.xda-developers.com/viewtopic.php?p=283140#283140
I will add this to the wiki shortly.
I managed to successfully use the r2sd command after unlocking.
Let me know if you need anymore information.
Thanks
Pete
Click to expand...
Click to collapse
hi ..thx for your help.
but..how to downgrade to JAMin_WWE_1000925_10009114_11420_ship.exe ? and what a hacked version of the rom update utility i can use? i mean expect JMFWM(the one need money.i don't like it).
can you please show me the detail steps...thank you very much.!
jimmy
jimmy80,
Have you try as discussed in this thread: http://forum.xda-developers.com/viewtopic.php?t=49298
While i was Cid unlocking the device at step 7 when i reset my phone. the screen is stuck at the welcome screen which indicates:
IPL: 1.00
SPL: 2.13.0000
GSM: 02.20.21
OS: 1.0.13.21
i tried to hard reset but it didnt work, please any suggestions?
Put your device into bootloader mode and reflash the WM5 ROM you have, like Qtek 2.20 WWE or O2 2.15, e.g.!
i tried but it would give errors.
anyway's here's so solution in case somebody had a similar problem (took me damned 5 hours to solve it!)
tried so many different things, the fastest and easiest is to enter bootloader.
and install this Rom RUU_Prophet_220734_2207114_024721_NVID.exe
and it Works!
for some reason the official Rom didnt work...
where can get RUU_Prophet_220734_2207114_024721_NVID.exe ?
where can get RUU_Prophet_220734_2207114_024721_NVID.exe ????
tommytao said:
where can get RUU_Prophet_220734_2207114_024721_NVID.exe ????
Click to expand...
Click to collapse
on google
it won't bite you
its posted here somwhere on the forum search for it.
or try jesterz 2.2 ROM
hi everyone, i install the new rom TNT.19199 the installation was succesfull but now the boot screen(this screen show the version of spl,gms, etc.) is freeze and the pc detect in manage device "PocketPC USB Sync".
Please i need help
i dont have money foy buy other
thank to all
hernanjhv said:
hi everyone, i install the new rom TNT.19199 the installation was succesfull but now the boot screen(this screen show the version of spl,gms, etc.) is freeze and the pc detect in manage device "PocketPC USB Sync".
Please i need help
i dont have money foy buy other
thank to all
Click to expand...
Click to collapse
its stuck on bootloaders ,Perhaps its not CID unlocked,did you get it CID unlocked before upgrading to wm6 TNT.19199 ? if not download and reflash back the official stock rom and downgrade to ipl/spl 1.xx,use lokiwiz02b to sim/cid unlock the phone and upgrade to ipl/spl 2.xx and then upgrade to any wm6 roms.
Btw,what IPL/SPL...? it displays at the moment ?
Cheers!
hey there, hope anybody got a hind or something in charge...
i like to flash another rom and unlock my device but in case of warranty issues i wish to be able to restore oem status (os, rom, spl, whatever).
i have already read about restoring but t-mobile didnt released an official software update yet and i couldnt find anything on the net.
i would be gratful on every help
i sent you a message
Bluntastic said:
hey there, hope anybody got a hind or something in charge...
i like to flash another rom and unlock my device but in case of warranty issues i wish to be able to restore oem status (os, rom, spl, whatever).
i have already read about restoring but t-mobile didnt released an official software update yet and i couldnt find anything on the net.
i would be gratful on every help
Click to expand...
Click to collapse
Would love to know the same. Any help?
Thanks
You can dump a ROM using itsme's utils: http://forum.xda-developers.com/showthread.php?t=334680
And re-construct it using jcespi2005's guide: http://forum.xda-developers.com/showthread.php?t=337066
Then re-flash it to your phone.
Thanks
Dave
But you can't dump the original bootloader with this method!
I don't know if the t-mobile bootloader is modfied in any way, but actually the original HTC bootloader should work.
Does anyone know, if there are differences between the bootloader of t-mobile and the original HTC bootloader? (which has to be used for restoring, because there is no dump of the shipped t-mobile bootloader)
floeti said:
But you can't dump the original bootloader with this method!
I don't know if the t-mobile bootloader is modfied in any way, but actually the original HTC bootloader should work.
Does anyone know, if there are differences between the bootloader of t-mobile and the original HTC bootloader? (which has to be used for restoring, because there is no dump of the shipped t-mobile bootloader)
Click to expand...
Click to collapse
If the versions of the SPL are the same then they will be the same.
If you have the Orginal T-Mobile ROM from there website you can dump the SPL using this method: http://forum.xda-developers.com/showthread.php?t=335568
Ta
Dave
http://www.t-mobile.de/fremdcontent/1,2790,123254,00.html
here you will find the official update to 6.1 (3.31.111.4) with a 1.70.18.2 radio
the rgb-screen tells me following:
KAIS130
SPL-1.56.0000
CPLD-8
i dont have any clue about risking warranty by flashing an extracted spl of the htc original rom...
the page adviced by first-test seems to be the one of choice thanks, dude just wondering why i did not found this before
does somebody knows about possible differences between the bootloader contained in this link and the one that came with the device?