Database Info

JAFWM-May not be the answer to flashing difficult prophets

Bought JAFWM yesterday and here is what I have found:
-Tried flashing New Jamin Rom
Result-Stuck in perpetual reset mode most of the time
When I did manage to get out of the automatic reset loop here is what I found:
1. Radio rom was not installed (=no phone, wifi, bluetooth functionality
2. device had incredibly poor response to any commands (severe lag issues)
3. Basic functionality (even without phone) was very bad
-Tried flashing Qtek Rom
Result-similar as imate (listed above)
1. No radio rom
2. device had better response than imate rom but still poor
Flashed back to shipped dopod 818 pro rom
-Thank God my device returned to normal (radio rom was installed this time)
Conclusion:
I don't think JAFWM can unlock CID (based on my exerience)
If their are any JAFWM experts out there please let me know if there is a way to get the radio rom installed with the new ROMS (ie. QTEK,IMATE)
If JAFWM can't unlock the CID than there is no advantage to using this device other than it's user friendly interface (which is quite easy for unexperienced rom flashers)
Still waiting for Dopod's new rom (that seems to be my only answer for AKU2)

I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR

Re: JAFWM-May not be the answer to flashing difficult prophe
rcnomad said:
Bought JAFWM yesterday and here is what I have found:
-Tried flashing New Jamin Rom
Result-Stuck in perpetual reset mode most of the time
When I did manage to get out of the automatic reset loop here is what I found:
1. Radio rom was not installed (=no phone, wifi, bluetooth functionality
2. device had incredibly poor response to any commands (severe lag issues)
3. Basic functionality (even without phone) was very bad
-Tried flashing Qtek Rom
Result-similar as imate (listed above)
1. No radio rom
2. device had better response than imate rom but still poor
Flashed back to shipped dopod 818 pro rom
-Thank God my device returned to normal (radio rom was installed this time)
Conclusion:
I don't think JAFWM can unlock CID (based on my exerience)
If their are any JAFWM experts out there please let me know if there is a way to get the radio rom installed with the new ROMS (ie. QTEK,IMATE)
If JAFWM can't unlock the CID than there is no advantage to using this device other than it's user friendly interface (which is quite easy for unexperienced rom flashers)
Still waiting for Dopod's new rom (that seems to be my only answer for AKU2)
Click to expand...
Click to collapse
Thanks for the feedback, in case JAFWM have some bug, your post will help me to debug it. It would help me also if you could post here your JAFWMLOG.txt , you can find it in same dir JAFWM.exe is located.
But I will check it also myself and will post result here, but sofar i know there are not any problems known until now. However, i have no NEO i will buy one at monday and play little bit. Maybe os not match bootloader or whatever, but let see after i have my NEO.

JAFWM-CAN FLASH DIFFICULT PROPHETS>>>IT REALLY WORK
Thanks TA_mobile
I did as you recommended and it worked!
JAFWM does what it is supposed to do...

Re: JAFWM-CAN FLASH DIFFICULT PROPHETS>>>IT REALLY
Today played little bit with my Qtek s200. I flashed it with with follow roms:
JAMin_WWE_ 2130923_21309112_020720_ship
RUU_Prophet_1001321_10013102_11320_DopodAsia_Ship
I did not unlock any CID before and all functions was normal. I did it with skipped and witout skipped bootloader flash. If any one have any problem with a secific rom, plz tell me and i will test it.
All this tests we has done with the new version (1.3beta) released today. You can download from http://forums.phone-tools.cn/showthread.php?t=9411 and try it.

ta_mobile said:
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Click to expand...
Click to collapse
Hello ta_mobile,
After flashing Dopod ROM into my Xda Neo using JAF without skip IPL/SPL, I got IPL=1.0 and SPL=2.09 and the device stucked at the bootloader mode with 3 colors and could not load the OS. I then flashed Neo with Qtek ROM 2.09 skiping IPL/SPL. My Neo works fine but now I have IPL 1.0 and SPL 2.09, I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????
Thanks

Tamagochi said:
ta_mobile said:
I tried flash my Dopod 818 pro to any rom such as Jamin or Qtek S200 by JAFWM and all run well.
You should know when to keep the bootloader and when to skip it.
If you want to play ROM JAMIN in your Dopod 818 pro, do like I did:
1. Use JAFWM downgrade bootloader to 1.0 by flashing Dopod818pro_WWE_1001321_10013102_11320_Ship without skip bootloader.
2. Unlock CID by aWizard. JAFWM will have function unlock soon be sure.
3. If you want to play ROM JAMIN with OS 2.0 do: use JAFWM flash RUU_Prophet_2100728_21007109_020720_QtekDAN_Ship without skip bootloader. Then flash JAMin_WWE_2130923_21309112_020720_ship. Cos as I know, only Qtek Rom can upgrade both IPL and SPL. And Dopod Rom can downgrade both. JAMin can not.
And if you just need to upgrade your radio only, you have to dump it to nba file, then use aWizard burn it to you phone. Cos the package of Prophet ROM always exits with 1 file nk.nbf.
If you use JAFWM mobility with other software, it'll greatly help.
That's my experience, hope your PDA work well
BR
Click to expand...
Click to collapse
Hello ta_mobile,
After flashing Dopod ROM into my Xda Neo using JAF without skip IPL/SPL, I got IPL=1.0 and SPL=2.09 and the device stucked at the bootloader mode with 3 colors and could not load the OS. I then flashed Neo with Qtek ROM 2.09 skiping IPL/SPL. My Neo works fine but now I have IPL 1.0 and SPL 2.09, I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????
Thanks
Click to expand...
Click to collapse
But what is the reason you want upgrade or downgrade your bootloader? I can not get it :?

Tamagochi said:
...I could not unlock CID using aWizard. Is there any way to get SPL 1.0 and do CID unlock????...
Click to expand...
Click to collapse
Hello,
i have an German O2 Neo and sometimes Problems with CID unlocking for Flashing. Start aWizard an use the option "e". Then show on youre XDA and start the enablerapi.cab on youre XDA. At next use aWizard with the option unlockCID and test flashing!
With this Method i can backup my Neo with aWizard and flash the new Jamin ROM, the Qtek ROM not. Rebackup to German ROM also OK but only the OS, the BootScreen (SplashScreen) not.
Sry for my miserable english!

My JAMIN not Working??

Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me

Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?

mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you

You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.

Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)

wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device

First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks

Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all

Vox Italian official ROM needed - Vox Bricked.

Hi All,
I need an Italian Official VOX ROM or instruction how-to flash unsigned ROM.
Please note that I have flashed a wrong ROM and Activesync does not work, I can access only though bootloader.
Can anyone help me?
Thanks

Here is something you could try : http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Try naming the VOXIMG.nbh instead of HERMIMG.nbh.
but I really don't know if this can work. most likely not in fact since I haven't seen it described for the vox on these forums..
Sorry I have really no experience in bricked devices. Well I bricked mine several times but usb connection still worked through bootloader, so I could start ruu updater when in bootloader mode and it worked fine.

I have bricked my Vox making custom roms, but have found that even though i can get into the bootloader and run up the RUU updater, every time i go to flash a rom i get errors saying wrong VendorID etc... this is because the rom i flashed had different ID's to the original HTC ROMS. Maybe you are signing them different to me?
Please help!

Hi Doctor,
it does not work with VOX.

iceberg2403 said:
I have bricked my Vox making custom roms, but have found that even though i can get into the bootloader and run up the RUU updater ...
Please help!
Click to expand...
Click to collapse
i`ve made the same mistake (flashed a ROM cooked by me) ... but prior to flash my phone i was lucky enough to use USPL 1.16 to permanently flash my SPL to 1.16 (i`ve used both archives Vox USPL-CID BYPASS.zip and Vox-USPL-RUU.zip) instead of 1.27 (original, vendor locked).
On the XDA ftp is a italian ROM if i`m not mistaking, did you try it ?
try this ... i`m not sure it will work.
Make sure you have disabled the USB connection in ActiveSync:
File --> Connection settings --> uncheck "allow USB connections"
1. get into booloader mode
2. connect with mtty
3. write password BsaD5SeoA
4. try to run the USPL 1.16 now ... (i`m just guessing)
if it doens`t work reset the phone and repeat step 1. and 2. and continue with:
3. write password BsaD5SeoA after that ruurun 0
4. try to run the USPL 1.16 now ... (i`m just guessing)
alternatively instead of USPL you can try to run the italian rom from the ftp.
i`ve managed to save my phone doing steps 1, 2, and 3 (not sure which one worked) from above and then flashed with ARA ROM ... but keep in mind my SPL was 1.16.
hope this helps

I'm italian could I help you...
Hi i'm italian and i'm totally nwe on those things...eheheh i haven't yet underrstand what those cooked roms are..but I have an italian s710 with the original rom...with some software on it..If i could help.... let me know..maybe send me a PM or a mail through the forum mail system..
ciao ciao fammi sapere
bye bye just let'me know

with TheBo`s help the problem is almost solved :d

My intention was just to ask if a backup of my original HTC VOX (unbranded) could help...sorry...next time I will not do the same mistake.

SPL
Hi,
unfortunately this does not help because my VOX is CID locked “g_cKeyCardSecurityLevel = FF” and Activesync does not work, for this reason I’m not able to flash any unsigned rom.
My SPL is 1.27.
I have tried to flash 1.16 but the procedure does not work.
It is a way to CID unlock my VOX from bootloader?
Can anyone cook a signed Italian ROM?
Thanks.

maybe TheBo`s ROM will work for you

Nop,
it does not help until my VOX is unlocked...

alllof said:
Nop,
it does not help until my VOX is unlocked...
Click to expand...
Click to collapse
if the Vendor ID is the same it will work
my Y! ID is maxtry80, TheBo and alllof contact me there, maybe i can help you

If you would to help us you can try to cook a signed rom from the dump in ftp://xda:[email protected]/Vox/ (file name: s710 rom 1.15.408.2 (italian + uk eng + us eng).rar) or give to us instructions how to do it.
Thanks for your help.
Regards.

i`ll try to help you ... i`ll be back in couple of hours with results

Thanks for your help!

check you pm!

did it work?

i tried the method posted a while back with no positive results .... yet
I was just wondering, i looked at the bootloader and it says Vox SPL 1.15 so this is the version i am using and it doesnt let me flash another vendor id rom...

VOX Briched.
Nop,
it does not work. I have sent my device to HTC...

Can you tell me how it works out?? I am hesitant to send mine to HTC (i had to import this phone) which will mean i have to pay heaps for shipping... and even then i dont expect them to replace it because the last rom i flashed had a different splash screen (silly me ) this will be obvious to them and therefore wont replace mine because i tampered with the rom.

Prblem during update to new ROM of Vodafone

Hi everyone,
my PDA (VPA Compact 2) is shutting down during every updateprocess (at 80%).
I try it a few time, but everytime the same problem.
WM5 ist not starting.
Everything I can see is the bootloader.
IPL 1.05
SPL 2.21
Can somebody help me?
What can I do?
Best regards
chicksor

chicksor said:
Hi everyone,
my PDA (VPA Compact 2) is shutting down during every updateprocess (at 80%).
I try it a few time, but everytime the same problem.
WM5 ist not starting.
Everything I can see is the bootloader.
IPL 1.05
SPL 2.21
Can somebody help me?
What can I do?
Best regards
chicksor
Click to expand...
Click to collapse
Custom build rom will not flash as your phone has IPL 1.xx,it must have IPL 2.xx and it shud be CID unlocked.Wm5 will not boot up as the original Bootloaders have changed,when you flashed Buttons rom to downgrade.
Now reflash Button's Rom 1.05 again in bootloaders and use lokiwiz02b to SIM/CID unlock the phone,after SIM/CID unlocking,upgrade to IPL/SPL 2.xx by flashing T-mobile 2.26,only after that it'll upgrade to any wm6 or 6.1 rom.But if you want to flash official vodaphone rom,download the official rom and flash it in Bootloaders.
Cheers !

[Q] Install RSPL on HTC 7 Pro

hi @all
my english is not so good.
But i try it and hope you can help me.
I have tryed to Jailbreak my Phone and install RSPL for installing the Freedom Rom.
This DFT-Tool said it´s all ok. Congrantulation. My Phone will Restart in RSPL Mode. But my Phone do nothing.
Now i dont know what i have to do. I cant update the Phone on Mango because i see an Error in Zune and i cant install an other Rom too.
Here you have the dates from my HTC 7 Pro.
Bootloader:SPL - 1.7.2250.0
MID: PC921000
my current Windows Phone 7 Version: 7.0.7392.0
I have searched in google but i cant find my Bootloader version.
When i Start my Phone i see in the upper left corner my Bootloader version an Modem.
you can see it in my Attachment.
Hope you can help me because the German Forums can´t do this.
Thx

Can noboddy help me?
I need Mango to use Whats app
I don´t wont a jailbreak anymore.

Cfire said:
Can noboddy help me?
I need Mango to use Whats app
I don´t wont a jailbreak anymore.
Click to expand...
Click to collapse
Hi
my English is not the same very good
I think that you can help this way the firmware
It's not too hard and all you can do at home
http://forum.xda-developers.com/showthread.php?t=893152
This way you can put absolutely any firmware

your bootloader is SPL version 1.7
simple try change to HSPL 1.7 (if supported or try use closest to your)
http://forum.xda-developers.com/showthread.php?t=1195647
after instaling HSPL, use only Mango custom ROM's with disabled Zune update (this is important to prevent (H)SPL damage and halfbrick device).... custom ROM also is full unlocked. after upgrade to Mango, do hard reset and your device is fully ready to use (and also can use custom cab files for customization's)
http://forum.xda-developers.com/showthread.php?p=17396493#post17396493

You can try do downgrade to official preNoDo or NoDo version from that topic: http://forum.xda-developers.com/showthread.php?t=1013810 or http://forum.xda-developers.com/showthread.php?t=995999 If you install these ROM you change SPL to 1.22 or 1.24 and you can install HSPL and DFT ROM.

Thank´s
i will try the second way from Budniu at first.
I hope it works.
--edit--
So i install the first version from Budniu. Now im on 7.0.7004.0.
But my SPL is the same as before.
@dxdy
i can´t install HSPL. Thats my problem.
When i try to start RSPL to install HSPL, it say´s "Congrantulations" but my device is not boot in RSPL.
"On screen you should see "RSPL" instead "SPL-"
No i don´t see it. My Device stays on SPL.

Sorry for this second Post.
I Think this information can be important to find a possible solution.
Indifferent what Version is installed, i have every time these four apps on my device.
But i never downloadet this apps.
Thanks for your effort .

Cfire said:
@dxdy
i can´t install HSPL. Thats my problem.
When i try to start RSPL to install HSPL, it say´s "Congrantulations" but my device is not boot in RSPL.
Click to expand...
Click to collapse
try few times... unfortunately i cant install R/HSPL to my demo 7 Pro but on friends Mozart also dont want run RSPL and tried few times and worked...

Will it work on Windows XP?
Because i have tryed it mutch times.
--edit--
So i try it with windows 7 too but it works not
I see everytime the congrantulations screen only and the phone do not restart in RSPL i´ve try with 1.22 and 2.10 both versions brings the same result.

Ok I think your device is branded. I don't know what is your operator ? T-Mobile or o2. You have to read: http://forum.xda-developers.com/showthread.php?t=1307542, maybe one ROM from these help to you.

ohhh sorry i fortgotten to say this detail.
Yes my device is o2 Brandet.

And you must try ...
Budniu said:
Ok I think your device is branded. I don't know what is your operator ? T-Mobile or o2. You have to read: http://forum.xda-developers.com/showthread.php?t=1307542, maybe one ROM from these help to you.
Click to expand...
Click to collapse

great job thank you

hi @ all
all your roms can´t help me to update my Phone.
So i send it in to repair and now it works with Mango.
Thank you all at the same.

Cfire said:
Can noboddy help me?
I need Mango to use Whats app
I don´t wont a jailbreak anymore.
Click to expand...
Click to collapse
Upgrade SPL to SPL_Signed.nbh from Ansar 1.22 Europe ROM by GoldCard (ROM O2 1.24 version contains SPL 1.07 too!). I had 1.07 after unbrick too, now I have HSPL applicable 1.22. M.

I had the same problem and created a different thread (not realising it was the same)
the solution is here http://forum.xda-developers.com/showthread.php?t=1505047
in effect, you need to flash a 1.22 rom, like, RUU_Gold_HTC_Europe_1.22.401.01_Radio_5.63.09.13_3a_22.36.50.15U_by_ansar
onto your device before you can then use the dft tool and then flash a custom rom.
Although it may be that there was no 1.22 rom for your german device at the time you posted...

感谢分享！！！