I'm currently on AOSPA-L and it does not work properly with Android Auto and Pioneer NEX-4100. It looks to be pixel density output problem. The head unit text looks big and I can't get pass the first screen. Does anyone know which ROMs have had success with Android Auto?
Thanks!
I ordered this TV box, really a great device. However, the remote control worked only once, then it was dead. New batteries and the camera test with the Smartphone brought no results. Factory mistake? I get a new one from the seller. But would like to know what the problem is and whether it is known?
I can not make satellite settings without the original remote control, because the red, yellow, blue and green buttons are required for this box.
Or is there a solution for this?
Hey guys, I'm totally new in android development.
I hope my questions are one the right point here.
My Setup:
1) LED light stripe controlled by Bluetooth with apps called "Flux Bluetooth" or "Magic Light".
2) Ticwatch E with latest Wear OS
My idea:
I want to control the LED by easily hitting a button on my Ticwatch. For the start an on/off switch would be great.
I tried some stuff like MacroDroid, but that didn't do the job.
Do you guys have any idea how i could get to the target?
I appreciate you help. Thx in advance. :victory:
Try with ifttt.com
The LED is confirmed by Motorola. I asked them a question and got an answer.
My question:
" This little dot on the right side of the flash in front is what it is then? You can see it in good lighting (moto g6). "
Response from the Motorola:
" Thanks for asking, that's interesting. The little dot on the right side part of the front flash is a sign of life LED light. It would only show/activate when the battery is deeply discharged and it's plugged into the charger. "
There is hope that in unofficial rom you will be able to use it.
Woah, woah, woah, hold up. It had an LED the entire time? So, why can't we use it? Unless it's a single color LED.
JoeGatto said:
Woah, woah, woah, hold up. It had an LED the entire time? So, why can't we use it? Unless it's a single color LED.
Click to expand...
Click to collapse
Probably all Moto G6 variants have this. Unfortunately, I can not find anywhere information whether it is a single-color LED. Motorola is pursuing a strange policy, the previous models also had a hidden diode and hardly anyone knew about it.
kemoti said:
The LED is confirmed by Motorola. I asked them a question and got an answer.
My question:
" This little dot on the right side of the flash in front is what it is then? You can see it in good lighting (moto g6). "
Response from the Motorola:
" Thanks for asking, that's interesting. The little dot on the right side part of the front flash is a sign of life LED light. It would only show/activate when the battery is deeply discharged and it's plugged into the charger. "
There is hope that in unofficial rom you will be able to use it.
Click to expand...
Click to collapse
I just saw this light turn on when I rebooted after flashing the OPW27.113-45 from this website
HTML:
https://www.getdroidtips.com/opw27-113-45-april-moto-g6-plus/#Firmware_Details
. Maybe it already works somehow in default ROM?
Controwl said:
...Maybe it already works somehow in default ROM?
Click to expand...
Click to collapse
For now I do not see newer firmware and update system for Moto G6, I do not know how it is with the Plus version. This diode is useless. You have to wait for effective solutions from unofficial developers. Probably all you need is a well-functioning root and the right application to add functionality to this diode.
EX Kernel Manager can trigger the led to do things, I have root to it works. I've got it blinking on charge and solid when done.
Bluemgt06 said:
EX Kernel Manager can trigger the led to do things, I have root to it works. I've got it blinking on charge and solid when done.
Click to expand...
Click to collapse
I can also confirm this works through EX Kernel Manager on my Moto G6 Play XT1922-7 Boost Mobile variant, I'm using the "Battery charging blink full solid full" option in the app, this is pretty neat lol! :good:
Edit: The LED is to the left of the camera on my G6 Play
Can also confirm using ex kernel manager with xt1922-7 boost variant that it does allow the led to work with charging. As well as a few other options lol just which we could choose more than one led option. Would be nice to have it for charging AND notifications lol
Maybe contacting the dev or if someone knows how that works can build an app to control it?
After installing root on my moto g6, I launched this application:
https://play.google.com/store/apps/details?id=br.com.itsmeton.motoledenabler&hl=en
https://play.google.com/store/apps/details?id=cyb.satheesh.lednotify
The diode works!
We need someone who will do a more polished application for our phones.
kemoti said:
After installing root on my moto g6, I launched this application:
https://play.google.com/store/apps/details?id=br.com.itsmeton.motoledenabler&hl=en
https://play.google.com/store/apps/details?id=cyb.satheesh.lednotify
The diode works!
We need someone who will do a more polished application for our phones.
Click to expand...
Click to collapse
We know the diode works, we already confirmed that with EX Kernel Manager.
Hi! I recently rooted my G6 Plus in order to use this charging LED. My goal is to make it blink softly when a notification arrives. I tried using Tasker according to this guide, but it didn't really work: I got it to ascend the brightness level, but it won't descend at all, even when running the second while-loop separately. After this, I can't even manage to change the brightness level until reboot. Strangely though, the script works as intended when run from adb shell. I started using "echo 1 > /sys/class/leds/charging/blink" when a notification arrives and 0 when the screen is unlocked. However, this is not ideal since the default blink is not very soft and the maximum brightness is too high. How could I make the bash script work properly in Tasker?
@pake10
You will not change the brightness or color of this diode (it's one color) so do not get tired. It's a waste of your time.
@kemoti
Thanks for answering — however, I did manage to change the brightness and make it "blink" with the script. The color can't be changed and that's okay. It seems that my problem is with Tasker since it works fine from adb Shell.
EDIT: I got it working by creating my own application, for some reason Tasker and other similar applications didn't execute the bash script properly.
hahah motorola has been putting this led on every phone i eventually had bought. the first moto g had it for notifications but g4 plus and g6 play have is as a sign of life
I got the diode working via the Resurrection Kernel when my phone is charging, but the diode is so small that you can't even see that there's anything going on. The capability is still a nice touch though.
pake10 said:
Hi! I recently rooted my G6 Plus in order to use this charging LED. My goal is to make it blink softly when a notification arrives. I tried using Tasker according to this guide, but it didn't really work: I got it to ascend the brightness level, but it won't descend at all, even when running the second while-loop separately. After this, I can't even manage to change the brightness level until reboot. Strangely though, the script works as intended when run from adb shell. I started using "echo 1 > /sys/class/leds/charging/blink" when a notification arrives and 0 when the screen is unlocked. However, this is not ideal since the default blink is not very soft and the maximum brightness is too high. How could I make the bash script work properly in Tasker?
Click to expand...
Click to collapse
Thanks--your hint worked for me!
I have a G6 with Nov , 2018 patch (OPSS27.104-92-2), I can control the LED from tasker with:
Code:
echo 1 > /sys/class/leds/charging/brightness # turn on
echo 0 > /sys/class/leds/charging/brightness # turn off
Hi guys I'm new on here, i do apologise if i have posted on the wrong area , i have a Chinese 10.1 inch android SPRD head unit with android 10 installed. I have fallen out with the guy i bought it off as there was a lot of miss advertisements on advert which did not match when i got the unit.
However thats another story and wont get into it, what i want to know and if anyone can help me i will really appreciate it as iv tried everything and getting no where. So here are my problems :-
1, Upgrading android 10 to android 11.. there seems to be no menu that has the upgrade option, so how can i upgrade to android 11 or twelve? And How do i upgrade mcu version?
2, im having problems with GPS when car is on i loose gps signal to like half of one bar.. when car/ignition is turned off GPS comes alive and get good signal and catches satellites.. what does this happen? Whats the solution?
3, i cant change the icons on home screen, cant change/add on tool bar, no bluetooth button to turn on and off on bar on top of screen.. but blue tooth is there works fine when connecting phone and bluetooth icon shows on top bar when connected..
4, the android version seems very limited on this unit, even in developer settings there dont seem to be many adjustments options to turn on or off.. i have a meter display shows cars rom gauge and speedometer its all im KM and there is no options anywhere to change this..
5, system does not shut down when car ignition goes off, i have to manually shut it down, even tho in settings its set to shut down when acc off! Any suggestions?
I have attached pictures of GPS ignition off and one of ignition on.. also all the build software info pictures too..
Any help would be appreciated
1. There's is no upgrade to Android 11 or 12.
These FYT 7862 units only go as high as Android 10. That may change in the future (maybe not) but any that you see say Android 11 or 12 it is fake (like mine, fake Android 11).
2. Are you using a GPS receiver that you got with the head unit or are you using your cars original GPS sensor? Where is it placed? Need more info to answer this
3. I don't know what home screen launcher is installed on your unit so cannot answer. Some launchers cannot change the icons, some can. A photo of the home launcher might help.
j0hn83 said:
1. There's is no upgrade to Android 11 or 12.
These FYT 7862 units only go as high as Android 10. That may change in the future (maybe not) but any that you see say Android 11 or 12 it is fake (like mine, fake Android 11).
2. Are you using a GPS receiver that you got with the head unit or are you using your cars original GPS sensor? Where is it placed? Need more info to answer this
3. I don't know what home screen launcher is installed on your unit so cannot answer. Some launchers cannot change the icons, some can. A photo of the home launcher might help.
Click to expand...
Click to collapse
1, thank you for clarifying
2, cars gps is connected as well as the external gps sensor. As it it dual system (can access cars original system as well as switch to android) cars gps on the car system works fine. The android gps is acting starnge, currently it is behind the dash right behind the head unit mounted on a metal plate top of antenna facing north…
3, i will up load picture shortly of my launcher screen
Thabk you
j0hn83 said:
1. There's is no upgrade to Android 11 or 12.
These FYT 7862 units only go as high as Android 10. That may change in the future (maybe not) but any that you see say Android 11 or 12 it is fake (like mine, fake Android 11).
2. Are you using a GPS receiver that you got with the head unit or are you using your cars original GPS sensor? Where is it placed? Need more info to answer this
3. I don't know what home screen launcher is installed on your unit so cannot answer. Some launchers cannot change the icons, some can. A photo of the home launcher might help.
Click to expand...
Click to collapse
Thats my current launcher john
Update :- problem solved i moved the gps antenna and stuck it behind the head lining restarted system and voila its working now. I had it behind the dash and on top of dash but looks like too much interference for it to work there.