PX5 backup camera. - MTCD Android Head Units Q&A

Hi, I bought the camera from this link
{Mod edit: Affiliate spam link removed. Oswald Boelcke, Senior Moderator} How to check if my px5 supports ahd?
There is no "Backcar Setting" in factory settings.

rafix095 said:
Hi, I bought the camera from this link
{Mod edit: Affiliate spam link removed. Oswald Boelcke, Senior Moderator} How to check if my px5 supports ahd?
There is no "Backcar Setting" in factory settings.
Click to expand...
Click to collapse
Is it an MTCD type unit, post Android system information including MCU version

marchnz said:
Is it an MTCD type unit, post Android system information including MCU version
Click to expand...
Click to collapse
System android 10 hal9k v5, mcu mtce_gs_v3.62

Any solutions ? I have also a dasaita px5 4gb octa core 10.2” ips for vw cars and nothing found in factory settings for backcar / front camera input settings , i want to install an ahd1080p wide angle camera but i don’t know if my unit supports this format and resolutions

Related

anyone can download me two files from russian 4PDA?

Hi guys
anyone with an account in 4pda, can go here Mod edit: Link removed.
and download the MCU marked as revision 3 and post it here
Mod edit: Link removed.
also here, post 23, there is the MCU and system files named ALL WINNER R16.zip, but i also cant download it. anyone can do that?i think the ALL WINER MCU .ZIP that contains system might be what i need to unbrick my android head unit.
thanks in advance
bump
nosidefcp said:
Hi guys
anyone with an account in 4pda, can go here Mod edit: Link removed.
and download the MCU marked as revision 3 and post it here
Mod edit: Link removed.
also here, post 23, there is the MCU and system files named ALL WINNER R16.zip, but i also cant download it. anyone can do that?i think the ALL WINER MCU .ZIP that contains system might be what i need to unbrick my android head unit.
thanks in advance
Click to expand...
Click to collapse
4PDA is a competing site and the discussion or use of files on XDA is prohibited.
Thread closed.

Question Joying firmware factory/developer password

I have a mekede M600s, recently I flashed joying's firmware from joying website, everything works fine, but I cannot get the password for factory settings, I've tried 3368, 126 and a bunch of others. no luck, even joying's website says it should be 3368.
can you guys give some me some help?
Thanks.
I had a similar problem in 2020 with a FYT based firmware, I tried 123456 and it worked, give it a try maybe ?
mariodantas said:
I had a similar problem in 2020 with a FYT based firmware, I tried 123456 and it worked, give it a try maybe ?
Click to expand...
Click to collapse
It didn’t work for me, it only allow maximum 4 digits
8086 ?
mariodantas said:
8086 ?
Click to expand...
Click to collapse
didn't work, Im wondering if there's a way to set the password before flashing the firmware.
Finally figured out:
besides changing "ro.build.fytmanufacturer", "ro.fyt.uiid" also need to be set.
in my case, I have mekede m600s, I need to set:
ro.build.fytmanufacturer=116
ro.fyt.uiid=4
with these 2 parameters set, then 3368 works for me.
Great information, thanks for that !, Also happy for you, now everything works fine
mariodantas said:
Great information, thanks for that !, Also happy for you, now everything works fine
Click to expand...
Click to collapse
Thanks for your help as well. really glad it works out.
hzn942 said:
I have a mekede M600s, recently I flashed joying's firmware from joying website, everything works fine, but I cannot get the password for factory settings, I've tried 3368, 126 and a bunch of others. no luck, even joying's website says it should be 3368.
can you guys give some me some help?
Thanks.
Click to expand...
Click to collapse
Hello friend, can you give me the step by step of your firmware change what do you think is better than Mekede, can you help me to make my change?
[email protected] said:
Hello friend, can you give me the step by step of your firmware change what do you think is better than Mekede, can you help me to make my change?
Click to expand...
Click to collapse
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com
Solvin said:
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com
Click to expand...
Click to collapse
But what did you think of the change, compensated, superior quality among other things?

UIS7862 with YIN MCU, no firmware available

Hi, I just bought a chinese Android Radio, I was looking for MCU updates or rooting it but after hours of searching for a fitting MCU i couldnt find anything. I dont have any expierence with Android Head units, so maybe im looking in the wrong places. I was hoping someone on here could help me out.
Edit: CPU says it is a UIS7862 if it helps
Requested moderator move to FYT forum.
I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?
Why MCU update. It's discussed in the forum, and you the a very up to date version - more recent than mine. Are you confusing MCU to Android?
hynnes said:
I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?
Click to expand...
Click to collapse
Check your FYT version with https://github.com/hvdwolf/JoyingBinRepo/raw/master/HWGet_info/HWGetInfo.apk . Read "ro.build.fytmanufacturer=" . YIN is normally 116.
Then read full post #1 and #2 of @surfer63 here
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com
bluemask69 said:
Check your FYT version with https://github.com/hvdwolf/JoyingBinRepo/raw/master/HWGet_info/HWGetInfo.apk . Read "ro.build.fytmanufacturer=" . YIN is normally 116.
Then read full post #1 and #2 of @surfer63 here
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com
Click to expand...
Click to collapse
This awnserd a lot of my questions, thank you
I also need this MCU (YIN). Does any friend have a new one to provide
hynnes said:
Hi, I just bought a chinese Android Radio, I was looking for MCU updates or rooting it but after hours of searching for a fitting MCU i couldnt find anything. I dont have any expierence with Android Head units, so maybe im looking in the wrong places. I was hoping someone on here could help me out.
Edit: CPU says it is a UIS7862 if it helps
Click to expand...
Click to collapse
Hello, do you have the file of your MCU
Can you provide it if any?
Jerry ming said:
Hello, do you have the file of your MCU
Can you provide it if any?
Click to expand...
Click to collapse
What do you mean? Do you need the Android firmware or the low-level MCU firmware? And if you need the low-level firmware: what is your manufacturer id?
And don't put your email address in if you don't want to get spammed by all kind of mail bots. Besides: a 1.3 GB firmware can't be sent via email anyway.
Jerry ming said:
Hello, do you have the file of your MCU
Can you provide it if any? [email protected]
Click to expand...
Click to collapse
choose the firmware according to the type of radio screen you have, I had flashed it by mistake on my radio which is a FYT NOR and not a FYT YIN (and on restarting the radio a warning green bar indicated that it was only for YIN).
Support / Software Download Address
7862 7inch/8inch
7862/9" 10"
7862-9"-10"-360
The latest MCU is required
surfer63 said:
What do you mean? Do you need the Android firmware or the low-level MCU firmware? And if you need the low-level firmware: what is your manufacturer id?
And don't put your email address in if you don't want to get spammed by all kind of mail bots. Besides: a 1.3 GB firmware can't be sent via email anyway.
Click to expand...
Click to collapse
Jerry ming said:
View attachment 5770659The latest MCU is required
Click to expand...
Click to collapse
On 4pda they have more MCU firmares, but it is not allowed to put links in XDA to 4pda.
surfer63 said:
On 4pda they have more MCU firmares, but it is not allowed to put links in XDA to 4pda.
Click to expand...
Click to collapse
Hey, i tried backing up my firmware with the guide you gave in your post, i plugged in my usb stick which does not have any other files than the backup files. Rebooted the thing, but it just startet like normal. Do i need to select a boot via usb stick ?
hynnes said:
Hey, i tried backing up my firmware with the guide you gave in your post, i plugged in my usb stick which does not have any other files than the backup files. Rebooted the thing, but it just startet like normal. Do i need to select a boot via usb stick ?
Click to expand...
Click to collapse
No, it should immediately work.
Can you do a listing of your USB-stick and show it here?
hynnes said:
I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?
Click to expand...
Click to collapse
Add a clean data file to upgrade. The file name updatecfg is

Upgrade Android 9->10. PX6 10.1 RK3399 MTCE_KSP. HELP - Various Issues.

*Belsee Android 9 headunit. (PX6 RK3399 10.1" 1024x600 Screen with the MCU MTCE_KSP and BTWQ_BC6)*
Hi Guys, I've been plugging away doing my own researching trying stuff etc. Just wanted to jot down my experience and see if anyone wants to chime in on a few things to help.
I ended up upgrading from my unknown version of Android 9 PQ2A to Android 10 CHS2 IMG -> Download Here
Updating my MCU Firmware from version 3.04 to 3.54 -> Download Here
I tried a number of different images, some not booting, some having a error on the screen MCU doesn't match type stuff. Tried those fixes but they didn't work. Tried the different mod packs but to be honest so many are so ugly.
But OK so I've settled on Android 10, everything works generally OK but I have two issues.
1. My sound used to be alot louder so I presume I had a patched MCU previously. How can I get this patched (file shortcut above)? The android amp mod software doesn't work.
2. My WIFI while it works is generally problematic compared to my Android 9. Is there any patch for Android 10 to fix WIFI related issues?
3. Is there any other Android versions I could update to? That may work with my KSP MCU version? Android 11 or 12 with the same styling as my CHS2.
4. Rooting the headunit seems to be an impossible task, mines not rooted but the mod packs available on here look horrible so I have just left it stock, anyone know of a better way?
But yeah looking for the MCU Sound Patch for my version which isn't available anywhere on the forums and the tools seem to have been removed, and if there's any root or other versions of Android etc.
Files generally sourced from Yandex -> Found here
SoundPatched only works on non-DSP devices, if you want a newer one you need to ask cs-x(RU) to adjustmentit , send him a private message:
[MOD][MCU] cs-x Mod MTCD/E MCU firmware (SoundPatched)
Modified firmware MCU MTCD/MTCE in the part of the presets of the sound processor (Sound Patched) thanks to the esteemed Hal9k_ for advice on creating a topic on the forum for English-speaking users and respected typos1 and Wadzio for their help...
forum.xda-developers.com
You can find the older version here, you can still downgrade the MCU:
[MOD][MCU] MTCB/C/D/E MCU SoundPatched Mod by cs-x - download links only
This is topic where I will put newest files from cs-x, downloaded from his 4pda.ru topic. This is made because cs-x stopped posting here and many people have problems registering or downloading from 4pda. All credits go to cs-x, he made it all...
forum.xda-developers.com
25.95 MB folder on MEGA
154 files
mega.nz
If you want to try a newer one, here's the MCU update without SoundPatched:
dmcu MTCE_KSP_V3.71.rar
drive.google.com
If there are problems with WIFI, you can also try third-party updates, you can find them here, but you already know:
Яндекс
Найдётся всё
disk.yandex.ru
You can try the German M.I.C. he released the latest update in November to fix more problems, I haven't tested it personally, maybe it will help with wifi:
HCT2_RK3399_10.0_ota(2020/08/08) SYCH/M.I.C
Android 10.0 version from SYCH/M.I.C for PX6 Head Units. Day/Night Theme is included! Enjoy :) Download: Fast --> Download build.prop: # begin common build properties # autogenerated by build/make/tools/buildinfo_common.sh...
forum.xda-developers.com
HCT2_PX6_10.0_ota(20221129)M.I.C.rar
drive.google.com
If you need root, the thread is here:
Root for Android 10 PX6 MTCE
I tested this on my Dasaita px6 mtce head unit once I installed Android 10 (thanks Diavol for the tip) I know that there are other ways to do this, but this is how I accomplished it. ****************DO THIS AT YOUR OWN...
forum.xda-developers.com
I personally use Hal9k paid mod 5.2.0 and have no problems, but other users report both bluetooth and wifi problems, mostly with the WQ_RF210 driver, probably a general problem with the latest android 10 updates. They report the same problem on Dasaita. Same problem with bluetooth, also has android 11, so until they release a fix, all I have to do is try older updates. Good luck.

Question no brand uis 7862 FYT, need firmware

hi please help me this is my FYT no brand android player the android feels buggy , the side button cannot be calibrate, the screen also . Is there any updated firmware or factory firmware that I can reinstall ? my seller cannot help because he just a reseller .
AHMD92 said:
hi please help me this is my FYT no brand android player the android feels buggy , the side button cannot be calibrate, the screen also . Is there any updated firmware or factory firmware that I can reinstall ? my seller cannot help because he just a reseller .
Click to expand...
Click to collapse
You can install a Joying or Mekede firmware that have early 2023 updates (Mekede) or late 2022 updates (Joying). Do NOT flash Teyes firmware.
But you have to check some properties on your unit and tweak them in the new firmware.
After having flashed one of these full firmwares, you might want to flash @mariodantas kernel.
But first read thread "General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware" post #1 for general info and post #2 for flashing firmware (before asking any questions like "where .." or "how ..." or "can anyone tell ..")
@surfer63 always impressed me, by his fully attention to the community members, he points members ALWAYS trough the right way, like "Yes do it BUT before read ....." to keep them as much adviced as possible.
You must be surely a project manager in your live or someone with a fully responsability Job (minimum, a team Manager, maybe Director).
I let fall my hat in front of your @surfer63 , you're a PRO
Sorry for the out of scope here, but feel the need of sharing this photos with you, after all, for me you're ALL my friends:
Look what the man did to my car, he literally destroyed it :
My sadness, now in penal court !
surfer63 said:
You can install a Joying or Mekede firmware that have early 2023 updates (Mekede) or late 2022 updates (Joying). Do NOT flash Teyes firmware.
But you have to check some properties on your unit and tweak them in the new firmware.
After having flashed one of these full firmwares, you might want to flash @mariodantas kernel.
But first read thread "General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware" post #1 for general info and post #2 for flashing firmware (before asking any questions like "where .." or "how ..." or "can anyone tell ..")
Click to expand...
Click to collapse
tq mate very helpful , btw any tips on how to boot into recovery ? i tried many way still no luck.

Categories

Resources