Database Info

Seicane PX5 MTCP_HF MCU file wanted

Hey, i'm a lucky owner of my Seicane Head Unit for my old Honda Jazz.
I'm looking for a MCU file of my HU.
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
If anyone can help with MCU file (or provide a list of file which is fully complatible with current one) i will really appreciate it.

LordBel said:
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
Click to expand...
Click to collapse
mmm... MTCP? not MTCE?
Compatibility with MTCD/MTCE (this forum section) is not very clear...
BTW, this section is for the software development... you should ask in the general sections...

themissionimpossible said:
mmm... MTCP? not MTCE?
Click to expand...
Click to collapse
Yes, MTCP. As far as i understand P - is for 8-channel audio. Maybe there are some other differences, but this is the one i'm aware of.
Can you please share what you have? i will try to check if it can be flashed on my HU.
Thanks!

I have a MTCE_HF with MCU v. 3.30 (the latest known on the net), but I suspect it's not compatible with your HU, but anyway you have already a v 3.30, even if it's a v. 3.30_1 (for MTCP?).

Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk

Question Which unit do I have and Which roms for it. Uis7862.

Hi.
I recently bought a Nissan qashqai j11 2017 facelift.
Bought a new radio avpst19xtnxt for it. Trough a site audiovolt.nl. it supports 360 camera DAB+ and tire pressure(doesn't work).
I am new to the car radio modding and want to change the launchers and hardware steering buttons. But first I need to know which unit or rom I currently have. Who can help me start identify this unit and help me start modding.

It's an FYT based unit.

Thank you. So I can install any FYT based rom?

You could read General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips

Tengo el mismo problema...

@chechuabuelo : Wrong forum. You have a TS10. Look in https://forum.xda-developers.com/f/android-head-units.4267/

surfer63 said:
@chechuabuelo : Foro equivocado. Tienes un TS10. Busque en https://forum.xda-developers.com/f/android-head-units.4267/
Click to expand...
Click to collapse
thanks for your answer

Not an FYT Device. Use report button to ask moderator to move to ( android head units) forum, and search on [TS10]

MTCE Head Unit resolution problem, no usb, how to change DPI

Hi All,
I have a MTCE unit in my car.
With some tinkering I've managed to unlock its potential, Swapping the launcher, customizing a bit and so on.
The only thing that bothers me a lot is that the units DPI or resolution is ridiculous, every app is barely usable everything is huge.
the units screen is 800x600
and this is its info:
Code:
Model
A-MEDIA AUTO (800x480 O)
Android version
6.0.1
Core version
3.10.0
[email protected] #1320
Build number
px5-userdebug 6.0.1 MXC89L user.hct 20180130.142324 test-keys
MCU version
MTCE_HZC_V2.75b_1
CPU
8 core 64-bit CPU Cortex-A53 @ 1.5G
Memory
2000 MB
after searching the forum and the internet:
there is no obvoius usb connection for ADB, or wireless ADB
only 2 sd slots and a mini usb connector that apparently doesnt even work
no root.
no secret menus with passwords in settings
is there any way I can change the DPI on this thing?
any help would be greatly appreciated.

Your question is much better posted here: https://forum.xda-developers.com/f/mtcd-software-development.7379/
I´ll ask a mod to move it to there. May be have a look around there.
BTW: You really need to upgrade your unit to at least Android 9.

rigattoni said:
Your question is much better posted here: https://forum.xda-developers.com/f/mtcd-software-development.7379/
I´ll ask a mod to move it to there. May be have a look around there.
BTW: You really need to upgrade your unit to at least Android 9.
Click to expand...
Click to collapse
Thanks for the reply, how can I know if it will work ok with android 10, android 6 is old and the unit is old will it have enough umph..?

AlexShu said:
Thanks for the reply, how can I know if it will work ok with android 10, android 6 is old and the unit is old will it have enough umph..?
Click to expand...
Click to collapse
It has a bit issues with the Memory, but I think it would work fine... and you would be able to root, or use a custom ROM with it.

The resolution is changed using the dmcu.ext file. Choose the resolution of your inclusion, copy dmcu.ext to the sd card and update the MCU.
Яндекс
Найдётся всё
disk.yandex.ru
If you decide to update to Android 9 or 10, check if you have suitable bluetooth, you can find all the information here:
[MTCD/E] Android 10 upgrade using official Free tools
To upgrade a MTCD/E PX3, PX5, PX6 from Android 6+ on using official Rockchip free tools - a reminder, bringing together multiple threads. First note - if coming from Android 6 - early versions of Realtek dual BT/WIFI (type 2) are not supported...
forum.xda-developers.com

Pavel-71 said:
The resolution is changed using the dmcu.ext file. Choose the resolution of your inclusion, copy dmcu.ext to the sd card and update the MCU.
Яндекс
Найдётся всё
disk.yandex.ru
If you decide to update to Android 9 or 10, check if you have suitable bluetooth, you can find all the information here:
[MTCD/E] Android 10 upgrade using official Free tools
To upgrade a MTCD/E PX3, PX5, PX6 from Android 6+ on using official Rockchip free tools - a reminder, bringing together multiple threads. First note - if coming from Android 6 - early versions of Realtek dual BT/WIFI (type 2) are not supported...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank you pavel, is there a some detailed info about how to do the resolution change?

AlexShu said:
Thank you pavel, is there a some detailed info about how to do the resolution change?
Click to expand...
Click to collapse
nevermind, i figured it out.
so if my unit is HZC i go to HZC and pick the last one ?
Яндекс
Найдётся всё
disk.yandex.ru

AlexShu said:
nevermind, i figured it out.
so if my unit is HZC i go to HZC and pick the last one ?
Яндекс
Найдётся всё
disk.yandex.ru
Click to expand...
Click to collapse
If you want to update the MCU, then yes. Before updating, save the settings in the dmcu.cfg file, it is a backup of your settings, in case of problems with dmcu.cfg, you update the MCU and everything will return to the original settings. Factory settings/126/EXPORT, you can find the file in the root directory, take good care of it, save it to external storage.

UIS7862 with YIN MCU, no firmware available

Hi, I just bought a chinese Android Radio, I was looking for MCU updates or rooting it but after hours of searching for a fitting MCU i couldnt find anything. I dont have any expierence with Android Head units, so maybe im looking in the wrong places. I was hoping someone on here could help me out.
Edit: CPU says it is a UIS7862 if it helps

Requested moderator move to FYT forum.

I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?

Why MCU update. It's discussed in the forum, and you the a very up to date version - more recent than mine. Are you confusing MCU to Android?

hynnes said:
I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?
Click to expand...
Click to collapse
Check your FYT version with https://github.com/hvdwolf/JoyingBinRepo/raw/master/HWGet_info/HWGetInfo.apk . Read "ro.build.fytmanufacturer=" . YIN is normally 116.
Then read full post #1 and #2 of @surfer63 here
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com

bluemask69 said:
Check your FYT version with https://github.com/hvdwolf/JoyingBinRepo/raw/master/HWGet_info/HWGetInfo.apk . Read "ro.build.fytmanufacturer=" . YIN is normally 116.
Then read full post #1 and #2 of @surfer63 here
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com
Click to expand...
Click to collapse
This awnserd a lot of my questions, thank you

I also need this MCU (YIN). Does any friend have a new one to provide

hynnes said:
Hi, I just bought a chinese Android Radio, I was looking for MCU updates or rooting it but after hours of searching for a fitting MCU i couldnt find anything. I dont have any expierence with Android Head units, so maybe im looking in the wrong places. I was hoping someone on here could help me out.
Edit: CPU says it is a UIS7862 if it helps
Click to expand...
Click to collapse
Hello, do you have the file of your MCU
Can you provide it if any?

Jerry ming said:
Hello, do you have the file of your MCU
Can you provide it if any?
Click to expand...
Click to collapse
What do you mean? Do you need the Android firmware or the low-level MCU firmware? And if you need the low-level firmware: what is your manufacturer id?
And don't put your email address in if you don't want to get spammed by all kind of mail bots. Besides: a 1.3 GB firmware can't be sent via email anyway.

Jerry ming said:
Hello, do you have the file of your MCU
Can you provide it if any? [email protected]
Click to expand...
Click to collapse
choose the firmware according to the type of radio screen you have, I had flashed it by mistake on my radio which is a FYT NOR and not a FYT YIN (and on restarting the radio a warning green bar indicated that it was only for YIN).
Support / Software Download Address
7862 7inch/8inch
7862/9" 10"
7862-9"-10"-360

The latest MCU is required
surfer63 said:
What do you mean? Do you need the Android firmware or the low-level MCU firmware? And if you need the low-level firmware: what is your manufacturer id?
And don't put your email address in if you don't want to get spammed by all kind of mail bots. Besides: a 1.3 GB firmware can't be sent via email anyway.
Click to expand...
Click to collapse

Jerry ming said:
View attachment 5770659The latest MCU is required
Click to expand...
Click to collapse
On 4pda they have more MCU firmares, but it is not allowed to put links in XDA to 4pda.

surfer63 said:
On 4pda they have more MCU firmares, but it is not allowed to put links in XDA to 4pda.
Click to expand...
Click to collapse
Hey, i tried backing up my firmware with the guide you gave in your post, i plugged in my usb stick which does not have any other files than the backup files. Rebooted the thing, but it just startet like normal. Do i need to select a boot via usb stick ?

hynnes said:
Hey, i tried backing up my firmware with the guide you gave in your post, i plugged in my usb stick which does not have any other files than the backup files. Rebooted the thing, but it just startet like normal. Do i need to select a boot via usb stick ?
Click to expand...
Click to collapse
No, it should immediately work.
Can you do a listing of your USB-stick and show it here?

hynnes said:
I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?
Click to expand...
Click to collapse
Add a clean data file to upgrade. The file name updatecfg is

Question no brand uis 7862 FYT, need firmware

hi please help me this is my FYT no brand android player the android feels buggy , the side button cannot be calibrate, the screen also . Is there any updated firmware or factory firmware that I can reinstall ? my seller cannot help because he just a reseller .

AHMD92 said:
hi please help me this is my FYT no brand android player the android feels buggy , the side button cannot be calibrate, the screen also . Is there any updated firmware or factory firmware that I can reinstall ? my seller cannot help because he just a reseller .
Click to expand...
Click to collapse
You can install a Joying or Mekede firmware that have early 2023 updates (Mekede) or late 2022 updates (Joying). Do NOT flash Teyes firmware.
But you have to check some properties on your unit and tweak them in the new firmware.
After having flashed one of these full firmwares, you might want to flash @mariodantas kernel.
But first read thread "General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware" post #1 for general info and post #2 for flashing firmware (before asking any questions like "where .." or "how ..." or "can anyone tell ..")

@surfer63 always impressed me, by his fully attention to the community members, he points members ALWAYS trough the right way, like "Yes do it BUT before read ....." to keep them as much adviced as possible.
You must be surely a project manager in your live or someone with a fully responsability Job (minimum, a team Manager, maybe Director).
I let fall my hat in front of your @surfer63 , you're a PRO

Sorry for the out of scope here, but feel the need of sharing this photos with you, after all, for me you're ALL my friends:
Look what the man did to my car, he literally destroyed it :
My sadness, now in penal court !

surfer63 said:
You can install a Joying or Mekede firmware that have early 2023 updates (Mekede) or late 2022 updates (Joying). Do NOT flash Teyes firmware.
But you have to check some properties on your unit and tweak them in the new firmware.
After having flashed one of these full firmwares, you might want to flash @mariodantas kernel.
But first read thread "General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware" post #1 for general info and post #2 for flashing firmware (before asking any questions like "where .." or "how ..." or "can anyone tell ..")
Click to expand...
Click to collapse
tq mate very helpful , btw any tips on how to boot into recovery ? i tried many way still no luck.