Database Info

Seicane PX5 MTCP_HF MCU file wanted

Hey, i'm a lucky owner of my Seicane Head Unit for my old Honda Jazz.
I'm looking for a MCU file of my HU.
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
If anyone can help with MCU file (or provide a list of file which is fully complatible with current one) i will really appreciate it.

LordBel said:
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
Click to expand...
Click to collapse
mmm... MTCP? not MTCE?
Compatibility with MTCD/MTCE (this forum section) is not very clear...
BTW, this section is for the software development... you should ask in the general sections...

themissionimpossible said:
mmm... MTCP? not MTCE?
Click to expand...
Click to collapse
Yes, MTCP. As far as i understand P - is for 8-channel audio. Maybe there are some other differences, but this is the one i'm aware of.
Can you please share what you have? i will try to check if it can be flashed on my HU.
Thanks!

I have a MTCE_HF with MCU v. 3.30 (the latest known on the net), but I suspect it's not compatible with your HU, but anyway you have already a v 3.30, even if it's a v. 3.30_1 (for MTCP?).

Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk

Anyone tried loading the new MCU version 3.80 or 3.83 GS for MTCH headunits into an MTCD or E unit?

As title. Was scouting around for updates and general info when I came across these MCU on a Russian site. I wondered if any of the coders here knew if they would be compatible?
Cheers

I have the same question..
I flashed MTCE from MTCD without issue but now the MTCH v3.80 (108kb) is half the size of the latest MTCE v3.79 (209kb) so if anyone can tell if it is recommended to upgrade of if its just compatible... if there are issues...

up... anyone..

Source 4pda, thread author and admin: MCU Firmware: cs-x:
You are trying to update the MCU firmware of your radio on the MTCE platform with firmware from another MTCH platform so know that these platforms are closely related from the same developer but still different (MCU microcontrollers are different and MCU firmware is different) , if you are lucky the update will fail otherwise the inclusion will stop working. The MCU may be repaired only with the help of a programmer.

Thanks understood

Question Joying firmware factory/developer password

I have a mekede M600s, recently I flashed joying's firmware from joying website, everything works fine, but I cannot get the password for factory settings, I've tried 3368, 126 and a bunch of others. no luck, even joying's website says it should be 3368.
can you guys give some me some help?
Thanks.

I had a similar problem in 2020 with a FYT based firmware, I tried 123456 and it worked, give it a try maybe ?

mariodantas said:
I had a similar problem in 2020 with a FYT based firmware, I tried 123456 and it worked, give it a try maybe ?
Click to expand...
Click to collapse
It didn’t work for me, it only allow maximum 4 digits

8086 ?

mariodantas said:
8086 ?
Click to expand...
Click to collapse
didn't work, Im wondering if there's a way to set the password before flashing the firmware.

Finally figured out:
besides changing "ro.build.fytmanufacturer", "ro.fyt.uiid" also need to be set.
in my case, I have mekede m600s, I need to set:
ro.build.fytmanufacturer=116
ro.fyt.uiid=4
with these 2 parameters set, then 3368 works for me.

Great information, thanks for that !, Also happy for you, now everything works fine

mariodantas said:
Great information, thanks for that !, Also happy for you, now everything works fine
Click to expand...
Click to collapse
Thanks for your help as well. really glad it works out.

hzn942 said:
I have a mekede M600s, recently I flashed joying's firmware from joying website, everything works fine, but I cannot get the password for factory settings, I've tried 3368, 126 and a bunch of others. no luck, even joying's website says it should be 3368.
can you guys give some me some help?
Thanks.
Click to expand...
Click to collapse
Hello friend, can you give me the step by step of your firmware change what do you think is better than Mekede, can you help me to make my change?

[email protected] said:
Hello friend, can you give me the step by step of your firmware change what do you think is better than Mekede, can you help me to make my change?
Click to expand...
Click to collapse
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com

Solvin said:
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com
Click to expand...
Click to collapse
But what did you think of the change, compensated, superior quality among other things?

UIS7862 with YIN MCU, no firmware available

Hi, I just bought a chinese Android Radio, I was looking for MCU updates or rooting it but after hours of searching for a fitting MCU i couldnt find anything. I dont have any expierence with Android Head units, so maybe im looking in the wrong places. I was hoping someone on here could help me out.
Edit: CPU says it is a UIS7862 if it helps

Requested moderator move to FYT forum.

I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?

Why MCU update. It's discussed in the forum, and you the a very up to date version - more recent than mine. Are you confusing MCU to Android?

hynnes said:
I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?
Click to expand...
Click to collapse
Check your FYT version with https://github.com/hvdwolf/JoyingBinRepo/raw/master/HWGet_info/HWGetInfo.apk . Read "ro.build.fytmanufacturer=" . YIN is normally 116.
Then read full post #1 and #2 of @surfer63 here
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com

bluemask69 said:
Check your FYT version with https://github.com/hvdwolf/JoyingBinRepo/raw/master/HWGet_info/HWGetInfo.apk . Read "ro.build.fytmanufacturer=" . YIN is normally 116.
Then read full post #1 and #2 of @surfer63 here
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com
Click to expand...
Click to collapse
This awnserd a lot of my questions, thank you

I also need this MCU (YIN). Does any friend have a new one to provide

hynnes said:
Hi, I just bought a chinese Android Radio, I was looking for MCU updates or rooting it but after hours of searching for a fitting MCU i couldnt find anything. I dont have any expierence with Android Head units, so maybe im looking in the wrong places. I was hoping someone on here could help me out.
Edit: CPU says it is a UIS7862 if it helps
Click to expand...
Click to collapse
Hello, do you have the file of your MCU
Can you provide it if any?

Jerry ming said:
Hello, do you have the file of your MCU
Can you provide it if any?
Click to expand...
Click to collapse
What do you mean? Do you need the Android firmware or the low-level MCU firmware? And if you need the low-level firmware: what is your manufacturer id?
And don't put your email address in if you don't want to get spammed by all kind of mail bots. Besides: a 1.3 GB firmware can't be sent via email anyway.

Jerry ming said:
Hello, do you have the file of your MCU
Can you provide it if any? [email protected]
Click to expand...
Click to collapse
choose the firmware according to the type of radio screen you have, I had flashed it by mistake on my radio which is a FYT NOR and not a FYT YIN (and on restarting the radio a warning green bar indicated that it was only for YIN).
Support / Software Download Address
7862 7inch/8inch
7862/9" 10"
7862-9"-10"-360

The latest MCU is required
surfer63 said:
What do you mean? Do you need the Android firmware or the low-level MCU firmware? And if you need the low-level firmware: what is your manufacturer id?
And don't put your email address in if you don't want to get spammed by all kind of mail bots. Besides: a 1.3 GB firmware can't be sent via email anyway.
Click to expand...
Click to collapse

Jerry ming said:
View attachment 5770659The latest MCU is required
Click to expand...
Click to collapse
On 4pda they have more MCU firmares, but it is not allowed to put links in XDA to 4pda.

surfer63 said:
On 4pda they have more MCU firmares, but it is not allowed to put links in XDA to 4pda.
Click to expand...
Click to collapse
Hey, i tried backing up my firmware with the guide you gave in your post, i plugged in my usb stick which does not have any other files than the backup files. Rebooted the thing, but it just startet like normal. Do i need to select a boot via usb stick ?

hynnes said:
Hey, i tried backing up my firmware with the guide you gave in your post, i plugged in my usb stick which does not have any other files than the backup files. Rebooted the thing, but it just startet like normal. Do i need to select a boot via usb stick ?
Click to expand...
Click to collapse
No, it should immediately work.
Can you do a listing of your USB-stick and show it here?

hynnes said:
I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?
Click to expand...
Click to collapse
Add a clean data file to upgrade. The file name updatecfg is

Question no brand uis 7862 FYT, need firmware

hi please help me this is my FYT no brand android player the android feels buggy , the side button cannot be calibrate, the screen also . Is there any updated firmware or factory firmware that I can reinstall ? my seller cannot help because he just a reseller .

AHMD92 said:
hi please help me this is my FYT no brand android player the android feels buggy , the side button cannot be calibrate, the screen also . Is there any updated firmware or factory firmware that I can reinstall ? my seller cannot help because he just a reseller .
Click to expand...
Click to collapse
You can install a Joying or Mekede firmware that have early 2023 updates (Mekede) or late 2022 updates (Joying). Do NOT flash Teyes firmware.
But you have to check some properties on your unit and tweak them in the new firmware.
After having flashed one of these full firmwares, you might want to flash @mariodantas kernel.
But first read thread "General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware" post #1 for general info and post #2 for flashing firmware (before asking any questions like "where .." or "how ..." or "can anyone tell ..")

@surfer63 always impressed me, by his fully attention to the community members, he points members ALWAYS trough the right way, like "Yes do it BUT before read ....." to keep them as much adviced as possible.
You must be surely a project manager in your live or someone with a fully responsability Job (minimum, a team Manager, maybe Director).
I let fall my hat in front of your @surfer63 , you're a PRO

Sorry for the out of scope here, but feel the need of sharing this photos with you, after all, for me you're ALL my friends:
Look what the man did to my car, he literally destroyed it :
My sadness, now in penal court !

surfer63 said:
You can install a Joying or Mekede firmware that have early 2023 updates (Mekede) or late 2022 updates (Joying). Do NOT flash Teyes firmware.
But you have to check some properties on your unit and tweak them in the new firmware.
After having flashed one of these full firmwares, you might want to flash @mariodantas kernel.
But first read thread "General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware" post #1 for general info and post #2 for flashing firmware (before asking any questions like "where .." or "how ..." or "can anyone tell ..")
Click to expand...
Click to collapse
tq mate very helpful , btw any tips on how to boot into recovery ? i tried many way still no luck.