hi please help me this is my FYT no brand android player the android feels buggy , the side button cannot be calibrate, the screen also . Is there any updated firmware or factory firmware that I can reinstall ? my seller cannot help because he just a reseller .
AHMD92 said:
hi please help me this is my FYT no brand android player the android feels buggy , the side button cannot be calibrate, the screen also . Is there any updated firmware or factory firmware that I can reinstall ? my seller cannot help because he just a reseller .
Click to expand...
Click to collapse
You can install a Joying or Mekede firmware that have early 2023 updates (Mekede) or late 2022 updates (Joying). Do NOT flash Teyes firmware.
But you have to check some properties on your unit and tweak them in the new firmware.
After having flashed one of these full firmwares, you might want to flash @mariodantas kernel.
But first read thread "General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware" post #1 for general info and post #2 for flashing firmware (before asking any questions like "where .." or "how ..." or "can anyone tell ..")
@surfer63 always impressed me, by his fully attention to the community members, he points members ALWAYS trough the right way, like "Yes do it BUT before read ....." to keep them as much adviced as possible.
You must be surely a project manager in your live or someone with a fully responsability Job (minimum, a team Manager, maybe Director).
I let fall my hat in front of your @surfer63 , you're a PRO
Sorry for the out of scope here, but feel the need of sharing this photos with you, after all, for me you're ALL my friends:
Look what the man did to my car, he literally destroyed it :
My sadness, now in penal court !
surfer63 said:
You can install a Joying or Mekede firmware that have early 2023 updates (Mekede) or late 2022 updates (Joying). Do NOT flash Teyes firmware.
But you have to check some properties on your unit and tweak them in the new firmware.
After having flashed one of these full firmwares, you might want to flash @mariodantas kernel.
But first read thread "General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware" post #1 for general info and post #2 for flashing firmware (before asking any questions like "where .." or "how ..." or "can anyone tell ..")
Click to expand...
Click to collapse
tq mate very helpful , btw any tips on how to boot into recovery ? i tried many way still no luck.
Related
Hey guys! Been out of the rooting game for a while now. All these locked bootloader nowadays has that effect. Thank God for the Chinese! I just ordered a android head unit for the car from Amazon :
Volsmart 7 inch Android 5.1.1 Car Stereo Lollipop Quad Core 1024600 Capacitive Touch Screen without DVD Player support GPS Navigation Radio Bluetooth OBD2 USB SD WiFi ScreenMirror Backup Camera https://www.amazon.com/dp/B01FVV8U2M/ref=cm_sw_r_other_apa_5jF5xbJ1VW5C8
And I'm wondering what the root process is like for one of these. I'm not sure sure if I should be looking for this specific device, or just something generic based on the software version for instructions. Can anyone point me in the right direction?
I have Volsmart 5.1 Mtcd-kgl mcu version 1.75_1. If your Mcu version is older, you can ask the seller to give you the latest firmware.
You can use Malaysk MTCD ROM.
I used Malaysk Rom v5 and then upgraded to V6. My HU is running without issue. Malaysk ROM is a pre rooted ROM.
Make sure that you know how to get to recovery menu of the head unit.
Right after upgrading to Makaysk ROM, it is hard to get to recovery to clear cache and data. Keep trying several times, you will be able to. After this, getting to the recovery is normal.
If you don't want to use Malaysk ROM, use Kingo Root, just follow the Xposed LP thread under MTCB development. I did try it successfully before I used Malaysk ROM.
So basically it's just as simple as flashing a different rom, eh? Sounds a little too easy lol
Got it all installed over the weekend. Working great!
Volsmart firmware
Hi guys
I bougth a head unit Volsmart android 5.1.1 for my Toyota Corolla 2009 at Amazon.com. I wrote directly to the vendor and they sent me an update with MCU 1.92.a1 dated in 10/16/2016, I let the link here. By the way I could not intall Malaysk because after doing the manual reset the head unit never found the Dupdate.img in the GPS car, I do not know why.
I'm sorry i could not write the link here because i'm new in the Forum
Thanks Ariel.
arielo2014 said:
Hi guys
I bougth a head unit Volsmart android 5.1.1 for my Toyota Corolla 2009 at Amazon.com. I wrote directly to the vendor and they sent me an update with MCU 1.92.a1 dated in 10/16/2016, I let the link here. By the way I could not intall Malaysk because after doing the manual reset the head unit never found the Dupdate.img in the GPS car, I do not know why.
I'm sorry i could not write the link here because i'm new in the Forum
Thanks Ariel.
Click to expand...
Click to collapse
Do you have a link for the latest mcu update? The people at Volsmart have not been very helpful with my inquiries.
---------- Post added at 07:08 AM ---------- Previous post was at 07:00 AM ----------
cemotech said:
Do you have a link for the latest mcu update? The people at Volsmart have not been very helpful with my inquiries.
Click to expand...
Click to collapse
Sorry, after some more searching I found it here. http://forum.xda-developers.com/and...k3188-mtcd-t3366561/post69468247#post69468247
arielo2014 said:
Hi guys
I bougth a head unit Volsmart android 5.1.1 for my Toyota Corolla 2009 at Amazon.com. I wrote directly to the vendor and they sent me an update with MCU 1.92.a1 dated in 10/16/2016, I let the link here. By the way I could not intall Malaysk because after doing the manual reset the head unit never found the Dupdate.img in the GPS car, I do not know why.
I'm sorry i could not write the link here because i'm new in the Forum
Thanks Ariel.
Click to expand...
Click to collapse
Ariel please share de link
Hey, i'm a lucky owner of my Seicane Head Unit for my old Honda Jazz.
I'm looking for a MCU file of my HU.
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
If anyone can help with MCU file (or provide a list of file which is fully complatible with current one) i will really appreciate it.
LordBel said:
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
Click to expand...
Click to collapse
mmm... MTCP? not MTCE?
Compatibility with MTCD/MTCE (this forum section) is not very clear...
BTW, this section is for the software development... you should ask in the general sections...
themissionimpossible said:
mmm... MTCP? not MTCE?
Click to expand...
Click to collapse
Yes, MTCP. As far as i understand P - is for 8-channel audio. Maybe there are some other differences, but this is the one i'm aware of.
Can you please share what you have? i will try to check if it can be flashed on my HU.
Thanks!
I have a MTCE_HF with MCU v. 3.30 (the latest known on the net), but I suspect it's not compatible with your HU, but anyway you have already a v 3.30, even if it's a v. 3.30_1 (for MTCP?).
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
Hello
Many years ago I bought s160 head unit for my hyundai i30
Today after 5 years i desided to install it not too late I guess
Any way it’s android os 4.4 not supported for most apps
Can someone help me to update it at-least to android 5
I will be thankful for you
You have to find a Custom Recovery that's suitable to phone & you have to find a Custom ROM that's suitable to phone.
If both found then in 1st step flash the Custom Recovery, and if success, then in 2nd step flash the Custom ROM by means of the Custom Recovery.
jwoegerbauer said:
You have to find a Custom Recovery that's suitable to phone & you have to find a Custom ROM that's suitable to phone.
If both found then in 1st step flash the Custom Recovery, and if success, then in 2nd step flash the Custom ROM by means of the Custom Recovery.
Click to expand...
Click to collapse
Thanks for replay
Where i can find this specific rom
Most articles talking about roadnav website but this site is not working
Sorry i am not an expert with that this first time i am trying to update a car head unit
Can you show me the way? Where should I start?
Do a Google search for both a Custom Recovery and a Custom ROM suitable to your phone: can't be so difficult, IMO.
jwoegerbauer said:
Do a Google search for both a Custom Recovery and a Custom ROM suitable to your phone: can't be so difficult, IMO.
Click to expand...
Click to collapse
Thanks i did that
It’s so easy for mobile but for car head unite it’s very complicated
As I understand
Rom has to match the model number
Build number the chip type
I didn’t find that custom rom that match with all of them
Any way will keep trying
thank you again
jwoegerbauer said:
Do a Google search for both a Custom Recovery and a Custom ROM suitable to your phone: can't be so difficult, IMO.
Click to expand...
Click to collapse
I mean it’s not difficult to find rom for phone
But it’s difficult for car navigation system that’s what happened with me
Stargovic said:
Hello
Many years ago I bought s160 head unit for my hyundai i30
Today after 5 years i desided to install it not too late I guess
Any way it’s android os 4.4 not supported for most apps
Can someone help me to update it at-least to android 5
I will be thankful for you
Click to expand...
Click to collapse
Hi,
Unfortunately S160 RoadNav units are restricted to Android 4.4.4
I have a slightly newer Firmware available but get used to your existing Head Unit Firmware first.
Regards, Leigh
Leigh63 said:
Hi,
Unfortunately S160 RoadNav units are restricted to Android 4.4.4
I have a slightly newer Firmware available but get used to your existing Head Unit Firmware first.
Regards, Leigh
Click to expand...
Click to collapse
I have S160 (M294-2) is there any new rom for it, roadnav site not opening for me !
Hi,
Roadnav.com is permanently closed.
However, I should be able to help you.
Please post a photo (or list) of your About Device Screens.I need to see which versions that you have now.
Regards, Leigh
Leigh63 said:
Hi,
Roadnav.com is permanently closed.
However, I should be able to help you.
Please post a photo (or list) of your About Device Screens.I need to see which versions that you have now.
Regards, Leigh
Click to expand...
Click to collapse
Thank you for your reply
Sad to hear about closing roadnav, is there any other official site?
Device info:
Leigh63
Leigh63 said:
Hi,
Roadnav.com is permanently closed.
However, I should be able to help you.
Please post a photo (or list) of your About Device Screens.I need to see which versions that you have now.
Regards, Leigh
Click to expand...
Click to collapse
Maybe you can help me too.
I have a winca s160 rk3188. It was impossible for me to find a new firmware.
Thank you very much in advance
Hi,
can someone you please upgrading s160 rk3188 (M231).
Thanks
I too am looking for this software roadnav S160 unfortunately the roadnav site is closed
Hello all, anyone got a customized ROM for Winca 160 with Android version higher than 4 yet? if so kindly guide to a link or something, thank you.
I have a mekede M600s, recently I flashed joying's firmware from joying website, everything works fine, but I cannot get the password for factory settings, I've tried 3368, 126 and a bunch of others. no luck, even joying's website says it should be 3368.
can you guys give some me some help?
Thanks.
I had a similar problem in 2020 with a FYT based firmware, I tried 123456 and it worked, give it a try maybe ?
mariodantas said:
I had a similar problem in 2020 with a FYT based firmware, I tried 123456 and it worked, give it a try maybe ?
Click to expand...
Click to collapse
It didn’t work for me, it only allow maximum 4 digits
8086 ?
mariodantas said:
8086 ?
Click to expand...
Click to collapse
didn't work, Im wondering if there's a way to set the password before flashing the firmware.
Finally figured out:
besides changing "ro.build.fytmanufacturer", "ro.fyt.uiid" also need to be set.
in my case, I have mekede m600s, I need to set:
ro.build.fytmanufacturer=116
ro.fyt.uiid=4
with these 2 parameters set, then 3368 works for me.
Great information, thanks for that !, Also happy for you, now everything works fine
mariodantas said:
Great information, thanks for that !, Also happy for you, now everything works fine
Click to expand...
Click to collapse
Thanks for your help as well. really glad it works out.
hzn942 said:
I have a mekede M600s, recently I flashed joying's firmware from joying website, everything works fine, but I cannot get the password for factory settings, I've tried 3368, 126 and a bunch of others. no luck, even joying's website says it should be 3368.
can you guys give some me some help?
Thanks.
Click to expand...
Click to collapse
Hello friend, can you give me the step by step of your firmware change what do you think is better than Mekede, can you help me to make my change?
[email protected] said:
Hello friend, can you give me the step by step of your firmware change what do you think is better than Mekede, can you help me to make my change?
Click to expand...
Click to collapse
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com
Solvin said:
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com
Click to expand...
Click to collapse
But what did you think of the change, compensated, superior quality among other things?
Hi, I just bought a chinese Android Radio, I was looking for MCU updates or rooting it but after hours of searching for a fitting MCU i couldnt find anything. I dont have any expierence with Android Head units, so maybe im looking in the wrong places. I was hoping someone on here could help me out.
Edit: CPU says it is a UIS7862 if it helps
Requested moderator move to FYT forum.
I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?
Why MCU update. It's discussed in the forum, and you the a very up to date version - more recent than mine. Are you confusing MCU to Android?
hynnes said:
I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?
Click to expand...
Click to collapse
Check your FYT version with https://github.com/hvdwolf/JoyingBinRepo/raw/master/HWGet_info/HWGetInfo.apk . Read "ro.build.fytmanufacturer=" . YIN is normally 116.
Then read full post #1 and #2 of @surfer63 here
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com
bluemask69 said:
Check your FYT version with https://github.com/hvdwolf/JoyingBinRepo/raw/master/HWGet_info/HWGetInfo.apk . Read "ro.build.fytmanufacturer=" . YIN is normally 116.
Then read full post #1 and #2 of @surfer63 here
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com
Click to expand...
Click to collapse
This awnserd a lot of my questions, thank you
I also need this MCU (YIN). Does any friend have a new one to provide
hynnes said:
Hi, I just bought a chinese Android Radio, I was looking for MCU updates or rooting it but after hours of searching for a fitting MCU i couldnt find anything. I dont have any expierence with Android Head units, so maybe im looking in the wrong places. I was hoping someone on here could help me out.
Edit: CPU says it is a UIS7862 if it helps
Click to expand...
Click to collapse
Hello, do you have the file of your MCU
Can you provide it if any?
Jerry ming said:
Hello, do you have the file of your MCU
Can you provide it if any?
Click to expand...
Click to collapse
What do you mean? Do you need the Android firmware or the low-level MCU firmware? And if you need the low-level firmware: what is your manufacturer id?
And don't put your email address in if you don't want to get spammed by all kind of mail bots. Besides: a 1.3 GB firmware can't be sent via email anyway.
Jerry ming said:
Hello, do you have the file of your MCU
Can you provide it if any? [email protected]
Click to expand...
Click to collapse
choose the firmware according to the type of radio screen you have, I had flashed it by mistake on my radio which is a FYT NOR and not a FYT YIN (and on restarting the radio a warning green bar indicated that it was only for YIN).
Support / Software Download Address
7862 7inch/8inch
7862/9" 10"
7862-9"-10"-360
The latest MCU is required
surfer63 said:
What do you mean? Do you need the Android firmware or the low-level MCU firmware? And if you need the low-level firmware: what is your manufacturer id?
And don't put your email address in if you don't want to get spammed by all kind of mail bots. Besides: a 1.3 GB firmware can't be sent via email anyway.
Click to expand...
Click to collapse
Jerry ming said:
View attachment 5770659The latest MCU is required
Click to expand...
Click to collapse
On 4pda they have more MCU firmares, but it is not allowed to put links in XDA to 4pda.
surfer63 said:
On 4pda they have more MCU firmares, but it is not allowed to put links in XDA to 4pda.
Click to expand...
Click to collapse
Hey, i tried backing up my firmware with the guide you gave in your post, i plugged in my usb stick which does not have any other files than the backup files. Rebooted the thing, but it just startet like normal. Do i need to select a boot via usb stick ?
hynnes said:
Hey, i tried backing up my firmware with the guide you gave in your post, i plugged in my usb stick which does not have any other files than the backup files. Rebooted the thing, but it just startet like normal. Do i need to select a boot via usb stick ?
Click to expand...
Click to collapse
No, it should immediately work.
Can you do a listing of your USB-stick and show it here?
hynnes said:
I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?
Click to expand...
Click to collapse
Add a clean data file to upgrade. The file name updatecfg is