Hi, I have a Chinese android head unit, I've fitted it in my van, all good apart from the one thing I wanted...Android Auto. Allegedly it's come with Android Auto installed. My phone and cable work fine in my car, and Auto connect to Android Auto, but not on this Android head unit I've fitted. I naively thought I could plug my phone in and it automatically start up but nothing happens, everything else on the head unit, I've worked out, and is fine. It's probably a set up problem, I'm wondering about an APL file, but I just don't know what to do and the instructions that came with it are not much help, I would appreciate a point in the right direction pls
Scrapman326 said:
Hi, I have a Chinese android head unit, I've fitted it in my van, all good apart from the one thing I wanted...Android Auto. Allegedly it's come with Android Auto installed. My phone and cable work fine in my car, and Auto connect to Android Auto, but not on this Android head unit I've fitted. I naively thought I could plug my phone in and it automatically start up but nothing happens, everything else on the head unit, I've worked out, and is fine. It's probably a set up problem, I'm wondering about an APL file, but I just don't know what to do and the instructions that came with it are not much help, I would appreciate a point in the right direction pls
Click to expand...
Click to collapse
I meant APK file, I've seen them but don't know what to do (if that is the issue)
Is it an FYT unit. Post Android system information including MCU version
@marchnz is right. Tell us what you have. There are a lot of different units.
Scrapman326 said:
I meant APK file, I've seen them but don't know what to do (if that is the issue)
Click to expand...
Click to collapse
It does not work automatically on these Chinese head utnits.
You first have to pair it to bluetooth.
Then you connect it via USB.
Then you start the z-link or carlink app, whatever it is called on your unit (and that is why we need to know what your unit is).
Then it should work.
surfer63 said:
@marchnz is right. Tell us what you have. There are a lot of different units.
It does not work automatically on these Chinese head utnits.
You first have to pair it to bluetooth.
Then you connect it via USB.
Then you start the z-link or carlink app, whatever it is called on your unit (and that is why we need to know what your unit is).
Then it should work.
Click to expand...
Click to collapse
Thanks, I’ll find the Android version and MCU (whatever that is), bare with me, thanks for the response, Bluetooth is paired, I can make calls via the head unit that way, and I connect via USB just as I do in my car, I haven’t seen a link for zlink or the android auto logo ?, all my phone does when I plug in is charge, there are two usb sockets on the back of the unit, 4 wire and five wire, my DAB aerial is plugged in the 4 wire and is working ok, my phone is in the five wire USB, I did swap them round , it made no difference, I’ll come back with MCU and Android version, thanks again, it’s a Brosmartek XRC-T3 06FuTe (that’s exactly what’s on the box) if that helps. I’ve found previously that purchases such as this come with very, very basic instructions, virtually zero.
If I search on your Brosmartek XRC-T3, the adds say you need to download the EasyConnect.apk. Did you do that?
surfer63 said:
@marchnz is right. Tell us what you have. There are a lot of different units.
It does not work automatically on these Chinese head utnits.
You first have to pair it to bluetooth.
Then you connect it via USB.
Then you start the z-link or carlink app, whatever it is called on your unit (and that is why we need to know what your unit is).
Then it should work.
Click to expand...
Click to collapse
Hi, I got it sorted, I hot spotted the unit off my phone and updated it, then I thought about z-link that you mentioned and recalled seeing Tlink5 ... I went into settings and changed from Google maps to the mysterious Tlink5 and hey presto...Tlink5 is required for Carplay and Android Auto. Everything is good now, such a shame that it's not in the instructions, then again what little instructions there was , was no help. Thanks for all your help, it was the Z-link mention that just got me wondering. "Tlink5"... who would have thought it.
Related
Hi All,
I've just gotten a car with native Android Auto support and I was looking forward to using this.
During the test drive in October 2015 (still on 5.1.1) I managed to get it working but sadly in my new car it's not working.
Due to the great number of variables I'd like to hear your experiences as well. I've tried Noble Rom and Extrestolite with similar results. The android auto app setup screen appears very briefly and then crashes back to the home screen.
I've also tried multiple USB cords to make sure this isn't the problem.
My car is a Skoda Superb with the Columbus infotainment system. This same system is used in various Volkswagen, Skoda and Seat cars.
I would really like to hear if you managed to get Android Auto working, on what radio / head unit and what rom and Android version.
If you had to do any extra steps to get it to work, please let me know too.
Thanks!
rajackar said:
Hi All,
I've just gotten a car with native Android Auto support and I was looking forward to using this.
During the test drive in October 2015 (still on 5.1.1) I managed to get it working but sadly in my new car it's not working.
Due to the great number of variables I'd like to hear your experiences as well. I've tried Noble Rom and Extrestolite with similar results. The android auto app setup screen appears very briefly and then crashes back to the home screen.
I've also tried multiple USB cords to make sure this isn't the problem.
My car is a Skoda Superb with the Columbus infotainment system. This same system is used in various Volkswagen, Skoda and Seat cars.
I would really like to hear if you managed to get Android Auto working, on what radio / head unit and what rom and Android version.
If you had to do any extra steps to get it to work, please let me know too.
Thanks!
Click to expand...
Click to collapse
did you try updating the software in the car it maybe an older version which not compatible with the app on your phone.
Cosmic Blue said:
did you try updating the software in the car it maybe an older version which not compatible with the app on your phone.
Click to expand...
Click to collapse
Thanks for the help. In the end the solution was both simple and insane.
Turns out it was a problem with the time setting. Even though my car had the correct time set I had to go into the settings of the car and set it to Auto (GPS) and set the correct time zone.
After that it started working and has been working consistently.
So I can't seem to get this to work. I downloaded Rock Scout, plugged my U11 in plugged it in, it shows "Use USB for MirrorLink" so I switch to file transfer usb and I get a new notification saying "MirrorLink Active", but my "MirrorLink" icon doesn't activate. I know the Legacy has MirrorLink v1.1, does anybody know if I have to do anything else to make MirrorLink work?
Also has anyone gotten MirrorLink to work on any car HU?
I posted a reply b4 didn't seem to work. To mirror htc u11 to a car head unit.
1. turn head unit on select mirror
2. have phone on a homepage
3. swipe up with three fingers this turns on mirroring.
4. select car entertainment system or whatever comes up on your phone.
That should mirror across it worked for me and my kenwood head unit I just installed.
remember every time you leave mirror to listen to music or directions or anything. to get back to mirroring you need to follow the steps again.
Hope that works for you as I said it worked for me. Good luck Chatto
I checked on cert.mirrorlink.com if your htc has mirrorlink and it is not showing up.
if you go on your phone settings at device connection or network connection (i don't remember exactly) can you see MirrorLink service there?
I think Subaru's mirror link version is not compatible with their crap head unit? I don't know. Yes I see "MirrorLink connection" in the USB connection settings. When plugged in, the phone thinks it's on, it just seems like Subaru's implementation doesn't recognize it, and of course a lot if not all the 2018 Subarus come with Android Auto. Guess they got tired of everyone complaining MirrorLink was foobar'd.
I stopped caring/trying. A bit of a shame actually.
What's the benefit of MirrorLink vs just bluetooth pairing? I just use bluetooth with my Kenwood, though I don't think it supports MirrorLink, and the Subi we have is a 2013, which also doesn't support MirrorLink that I know of, but also has good old bluetooth. Is there some secret i'm out of the loop about, or is it more or less trivial prefrence?
Well mirrorlink could let me use, say Waze on my headunit display instead of buying a mount and mounting my phone. The gist of mirrorlink is basically you can get your phone display on the headunit. But yes bluetooth works.
Anyway for those interested in what I see and the "version" of software on my headunit:
Settings showing mirrorlink active: http://imgur.com/a/cNymR
Notifications saying mirrorlink is on: http://imgur.com/a/TYMfM
my headunit version info: http://imgur.com/a/5cl14
Maybe its a version issue and I need an update, but bottom line is, if Subaru says they have it, and my phone has it, it should work. However judging by the feedback around the internet, it would appear Subaru is at fault here somehow. So shame on them for choosing poor technology and/or having engineers implement it poorly.
Double post. Sorry
seba.olah said:
I checked on cert.mirrorlink.com if your htc has mirrorlink and it is not showing up.
if you go on your phone settings at device connection or network connection (i don't remember exactly) can you see MirrorLink service there?
Click to expand...
Click to collapse
You are correct, I didn't see it on there either. But it's clearly on the device. Check my post above. Maybe it has 1.2 on it and Subaru only supports 1.1. (They had the same issue with 1.0 and 1.1). I sent HTC a question about it so we'll see.
Hi,
I just installed few days ago a PX5 MTCE_MX_V2.92_1 in my Peugeot 508 with JBL Sound system.
It went all almost ok (except the seller didn't understand I had to activate "With Amplifier" in the Factory settings, or I had absolutely no sound).
I have one problem : There is sound when I put radio, Ad2p music, usb stick music, phone call... but absolutely no sound when I try to read a CD or a DVD with the DVD app that came installed on the system.
I tried the MyTunerRadio app, and also no sound.
Do the stock apps (radio, bluetooth, usb stick) have something special to output audio differently, or am I missing something?
Does anyone also know any other app on the play store that can read the CD/DVD from inside the Unit?
Thanks
Hi again,
I received a new Canbus today from the seller, I don't understand why... and since we have trouble communicating, I'm asking you guys.
The one I got with the head unit, with for Peugeot 407 (I have a 508), the Android is starting, and all is working "more or less" ok.
The one I received today has two plugs, on each side of the decoder. And when I plug one side, well, Android is not turning on... which seems logical to me.
Any idea? do I need a new cable to connect the new decoder?
Thanks
Any Idea on this? I got a carplay dongle but also no sound...
do u solve it? i have 508 with JBL also..installed android device..no sound at all
Same here
Hi, same for me on my 508 with JBL amplifier.
Bluetooth Ad2p audio, radio and USB music works nice.
But no audio from CD, DVD, and the worse: from Bluetooth calls.
I am checking with the reseller and if can't help I'll ask for a refund. Or I hope you guys will get luckier and get an answer
Edit: I am under MTCE_MX_V2.91.
A weird thing is that if i want sound from basic apps, I first need to play music from USB, pause it, then I can hear the sound from the other app suddenly (but still not from CD, DVD, YouTube app). As the original poster wrote, there must be something with the way some apps output sound. I really hope it's easy to fix.
Solution
Guys, I have the solution!
Hopefully, this works for you too.
After a week of fighting about that with my seller (Autostereo), he finally provided me with a solution (I had opened dispute with agreed half refund so it motivated him I believe, to help me more...).
So, I updated my PX5 (manufacturer: MX / Witson - octacore, 4gb RAM) to a very last version "mx4_PX5_8.0(20181122)". The seller also sent me an update for the MCU but I didn't deploy it because it was working already with the PX5 upgrade. I give you here both files. Again, it was enough for me to just do the PX5 update; it all started to work suddenly (among other improvements), so I am more than satisfied.
At the time I am writing this post, there are 6 days left for the files: we.tl/t-A8ysf9ggAp EDIT: changed the link on Dec. 27, 2018
If needed, I can later upload them somewhere else (GDrive or something).
Can you send to me. I have the same problem. I would be very gratefull for your help.
@Perle123 check on the link I provided
?.Did you unzip them after download, or put them straight on to usb. How did you install.
Perle123 said:
.Did you unzip them after download, or put them straight on to usb. How did you install.
Click to expand...
Click to collapse
I could answer you "search on the forum" because that's what I had to do the first time, I had no clue how to update But it's easy:
1. Format a USB key to FAT32 file system (quick format is enough).
2. Unpack the mx4_PX5_8.0(20181122).zip
3. From the mx4_PX5_8.0(20181122).zip, copy the file update.zip (do not unpack it!) to the USB key.
4. Plug the USB key into your car unit, Android should recognize it straight and allow you to upgrade.
5. Click OK to upgrade, it will do the job (5 minutes for me), restart with updated PX5 (and sound working in all applications, DVD, CD, YouTube, DI.FM, etc.).
Note 1 : it asked me if I wanted to wipe data or not; I chose no.
Note 2: I recommend you do it with engine running in case the upgrade takes longer, to avoid safe consumption energy cut during the upgrade.
Note 3: I didn't have to reconfigure anything, not even CANBUS. I let it to amplifier mode "with amplifier".
Additional note for @ifoul: I have the same CANBUS as you exactly. I mean the original one, not the one the seller sent you again. And I think you should remain with the original one, it is configured for JBL. It is originally for Peugeot 408 (not 407 as you wrote), a model mostly sold only in China and that has similar commands as the 508; that's why it works with the 508.
Hope this helps!
Hi All,
Sorry for the long delay, turns out I didn't get thread notifications on my email.. so I forgot a bit about this thread.
It's funny because I also received two days ago (after long battling with seller DADAgps ? ) a new DMCU 3.00 MX and firmware from 20181122, and It's working correctly since two days.
I first did the DMCU upgrade, was not working, and then firmware upgrade ,and working.
So I can confirm it's definitely the Firmware.
the CarPlay dongle is finally useful (main reason why I bought the Android Head Unit).
If needed I can host the files online, just ask.
@slovinco, Yes, I stayed with the original Canbus, the other doesn't even start the android.
Also I have another Canbus on the way, they were sending it last week, before knowing about the new firmware.
ifoul said:
Hi All,
Sorry for the long delay, turns out I didn't get thread notifications on my email.. so I forgot a bit about this thread.
It's funny because I also received two days ago (after long battling with seller DADAgps ) a new DMCU 3.00 MX and firmware from 20181122, and It's working correctly since two days.
I first did the DMCU upgrade, was not working, and then firmware upgrade ,and working.
So I can confirm it's definitely the Firmware.
the CarPlay dongle is finally useful (main reason why I bought the Android Head Unit).
If needed I can host the files online, just ask.
@slovinco, Yes, I stayed with the original Canbus, the other doesn't even start the android.
Also I have another Canbus on the way, they were sending it last week, before knowing about the new firmware.
Click to expand...
Click to collapse
Perfect then Probably the manufacturer sent a FW upgrade to all sellers, seeing that a few os us have problems. Still, we must not be a lot with JBL and Android unit
Now finally we can fully enjoy this delicious unit.
Yes, not that many, for sure ?
From which country are you?
Now I need to install the camera that I received... that will be fun to put all the cables from the trunk to the Android!
ifoul said:
Yes, not that many, for sure
From which country are you?
Now I need to install the camera that I received... that will be fun to put all the cables from the trunk to the Android!
Click to expand...
Click to collapse
According to the photo of your radio app and the radio station names, maybe from the same country as you
I also installed rear camera for backup. It was not funny at all, especially taking down the plastic parts and putting them back. My hands still hurt. And also the wireless version is not very stable so I ordered cables to make it better. That means I'll have again to take down the plastic parts.
FYI, I bought this: aliexpress.com/item/For-Peugeot-301-308-408-508-2013-2014-Citroen-C5-C4-Car-CCD-Night-Vision-4LED/32598855986.html
But that's also another topic When I finish all this (I will also install headrest monitors), I will publish some articles on some Peugeot blog, because I quite enjoy doing this all!
Well, let's keep in English, in case it's useful for other people.
I ordered a similar one from amazon : https://www.amazon.fr/gp/product/B079NX178V/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
because I found that the one I got for free from the aliexpress seller was hanging a bit too low. ( https://www.aliexpress.com/item/Wat...ml?spm=2114.10010108.1000023.9.6681277dXMa7AN )
Before you make your blog posts, do you maybe have some photos you took during install, to see how to remove the parts?
Small question regarding the camera.
Which cables did you take for the alimentation?
That was hard unboxing the trunk, but good thing I found all those PDFs from Peugeot https://www.forum-peugeot.com/Forum/threads/schema-pour-démontage-garniture-hayon-sw.34967/
Will answer you in private message as this is off topic
Thank you for your help. It worked for me too. The only thing that dosnt work is the front parking sensor and not all the steering wheel buttons. Can you assign the buttons in your meny, becourse i can not
sent to me also
Perle123 said:
Thank you for your help. It worked for me too. The only thing that dosnt work is the front parking sensor and not all the steering wheel buttons. Can you assign the buttons in your meny, becourse i can not
Click to expand...
Click to collapse
I don't have those issues, sorry for you. Make sure you have at least the proper canbus set up.
One thing though, the Wheel key study application does not work for me either. So even if all buttons work ok for me, I am not able to change their settings.
---------- Post added at 12:28 PM ---------- Previous post was at 12:26 PM ----------
scoponoc said:
sent to me also
Click to expand...
Click to collapse
You mean "send" maybe? In that case, how about a little "please" with that?
Anyway, read again my previous posts...
*******Edit: I was able to resolve most of the issues I've been experiencing with my Android Unit. *******
Incorrect Time- I needed to update my firmware, as suggested by users in the forum. The seller was able to send me an updated version at the time.
SWC- My resolution mentioned down below. I may change it back to CAN key and see if the CANBUS connection issue I had was the real culprit.
Random Power cycling- User error. I didn't realize I didn't plug the power cable completely into the unit.
A/C Display- I have @brettf to thank for this. I initially switched cables like he mentioned below, but found they didn't work THE FIRST TIME I did this, so I switched the cables back to their original [incorrect] positions. The second time around, ie. yesterday, I decided to try it again, but this time, I took into account my CANBUS settings. I changed the CANBUS controls to the last ACCORD_7(Chan........) setting and it finally worked for my system. So, now I understand what most users have been talking about in regards to the temperature only being in Celsius. If there's a fix for this that I may have missed, I'd highly appreciate it.
GPS signal- Lol unintentional user error this time, without realizing I even made a mistake. My unit wasn't labeled with which SMA connector was which for the GPS antenna or Bluetooth antenna, so I had accidentally switched them around during my initial installation. I decided to actually take a look at the diagram on AliBaba's seller page and lo and behold, they were indeed switched around. Previously, it would take over 5 minutes for a signal to be fixed and there was no guarantee it would be stable even on a clear day, but after the switch, the GPS signal is strong and fixes immediately to a signal now.
Bluetooth - Even though I'm not an audiophile, the music played from A2DP sounds even better following the aforementioned sma switch around. Tbh, I'm not tech savvy enough to understand how either the GPS or bluetooth have been working at all after all this time since my initial installation, but it works like it's supposed to now.
Mic- I ordered another external mic, so whenever it comes in, I'll try to update and see if there are any improvements with the quality, as I've realized my old mic sounded "distant" before when it was connected to my iSimple device.
Initial issue mentioned below:
Hello. I recently purchased this Seicane unit:
[Alibaba (**dot**) com/product/62132856562/10-1-Inch-Android-9-0.html?tracelog=null
I've been having the usual issues that I kind of anticipated with these Chinese head units *(ie. time was not set correctly when I initially installed it but I was able to fix it with an update, steering wheel controls no longer work(fixed), climate settings I press on the unit do not display on the screen but the A/C still works (fixed), just to name a few examples). But one problem I didn't anticipate was, my unit continuously reboots/powers off after I turn on the car and/or the screen may not come on unless I turn the ignition on and off again (fixed). With that being said, the Bluetooth cuts in and out as well and microphone quality is subpar at best, even after using an external mic from a previous isimple unit used with my original navigation unit.
So far, I honestly like this Seicane unit and I don't have buyer's remorse, but these little annoyances are starting to add up. Is there anyway I can fix these issues, especially the annoying rebooting? Thank you.
I recorded what I'm talking about earlier after work today:
youtu (**dot**) be/VvQnOBJGmWM
Anything at all?
chewybits95 said:
Anything at all?
Click to expand...
Click to collapse
Have you tried returning it, or lodging a dispute with the reseller?
marchnz said:
Have you tried returning it, or lodging a dispute with the reseller?
Click to expand...
Click to collapse
I didn't want to go that route yet until I troubleshoot it myself. Plus, shipping to China is expensive, so that'll be my last ditch solution if I'm not able to figure out these menial issues.
Others here have experienced these problems you should be able to find their threads. From what I've read before the rebooting was linked to the HU losing internet access but those were units with a SIM card port. Setting airplane mode helped when they had no SIM and/or were connected to the phone hotspot. But if there's a problem with a SIM in relocating the antennas was needed otherwise the unit needs repair.
For the HVAC display you need a CANbus decoder specific to your car. It's not unusual for a seller to not include it unless you told them you need it. You have to be very literal and specific with them. One guy received the wrong one and only fixed it by convincing another seller (Dasaita) to sell him one. In your case it worked before and no more after the update then you may need to try different settings in the CANbus menu. Did you get your update from Seicane? If not you should ask them for one.
nic2k said:
...
For the HVAC display you need a CANbus decoder specific to your car. It's not unusual for a seller to not include it unless you told them you need it. You have to be very literal and specific with them. One guy received the wrong one and only fixed it by convincing another seller (Dasaita) to sell him one. In your case it worked before and no more after the update then you may need to try different settings in the CANbus menu. Did you get your update from Seicane? If not you should ask them for one.
Click to expand...
Click to collapse
I don't think this is the case here. I have the same unit as OP.
Check this thread regarding the Climate Control display issue: https://forum.xda-developers.com/an...1-android-8-2003-accord-t3923783/post79786553
brettf said:
I don't think this is the case here. I have the same unit as OP.
Check this thread regarding the Climate Control display issue: https://forum.xda-developers.com/an...1-android-8-2003-accord-t3923783/post79786553
Click to expand...
Click to collapse
How would I go about actually changing the wires around though? Do I just pull them out of the harness? Lol, I'm not an electrician, so I would prefer not to break the unit.
I may have figured out the rebooting issue: when I went back to finally check the back of the unit, I found the power cable with the blue harness wasn't completely connected to the unit. Whoops, lol!
I'll test it out whenever I drive my accord again and see if this definitely fixed the rebooting issue.
chewybits95 said:
How would I go about actually changing the wires around though? Do I just pull them out of the harness? Lol, I'm not an electrician, so I would prefer not to break the unit.
Click to expand...
Click to collapse
Just pop them out of the connector. There's a little tab on the metal bit inside the connector. If you press it and pull the wire softly, it will pop out.
brettf said:
Just pop them out of the connector. There's a little tab on the metal bit inside the connector. If you press it and pull the wire softly, it will pop out.
Click to expand...
Click to collapse
I was able to pop them out like you mentioned, but no changes. Luckily the a/c still works, so I guess I'll just leave it as is for now... Thank you for the guidance.
Follow up- so I was able to diagnose and fix the majority of the issues I listed thanks to you guys.
In terms of the steering wheel controls, Seicane's engineers failed to switch the steering wheel control settings in the factory settings to "SWC keys" before shipping it out. I found this setting only after attempting to install a universal SWC remote myself, so now I was able to retain both my original controls and the newly installed remote, which is a nice addition now. If you guys ever have issues with the car's original SWC settings when installing your unit, check your settings by going to:
CAR (Driving, navigation some settings) -> Factory Settings (passcode 126) -> Other -> Steering wheel keys assign -> ***Switch to SWC Keys if it's set to Can key***
Note- I'm not sure if the settings will differ per android software, but my unit is Android 9.0
chewybits95 said:
I was able to pop them out like you mentioned, but no changes. Luckily the a/c still works, so I guess I'll just leave it as is for now... Thank you for the guidance.
Click to expand...
Click to collapse
You should also make sure your car profile is "116 Accord 7" under factory settings - canbus
chewybits95 said:
*******Edit: I was able to resolve most of the issues I've been experiencing with my Android Unit. *******
Incorrect Time- I needed to update my firmware, as suggested by users in the forum. The seller was able to send me an updated version at the time.
SWC- My resolution mentioned down below. I may change it back to CAN key and see if the CANBUS connection issue I had was the real culprit.
Random Power cycling- User error. I didn't realize I didn't plug the power cable completely into the unit.
A/C Display- I have @brettf to thank for this. I initially switched cables like he mentioned below, but found they didn't work THE FIRST TIME I did this, so I switched the cables back to their original [incorrect] positions. The second time around, ie. yesterday, I decided to try it again, but this time, I took into account my CANBUS settings. I changed the CANBUS controls to the last ACCORD_7(Chan........) setting and it finally worked for my system. So, now I understand what most users have been talking about in regards to the temperature only being in Celsius. If there's a fix for this that I may have missed, I'd highly appreciate it.
GPS signal- Lol unintentional user error this time, without realizing I even made a mistake. My unit wasn't labeled with which SMA connector was which for the GPS antenna or Bluetooth antenna, so I had accidentally switched them around during my initial installation. I decided to actually take a look at the diagram on AliBaba's seller page and lo and behold, they were indeed switched around. Previously, it would take over 5 minutes for a signal to be fixed and there was no guarantee it would be stable even on a clear day, but after the switch, the GPS signal is strong and fixes immediately to a signal now.
Bluetooth - Even though I'm not an audiophile, the music played from A2DP sounds even better following the aforementioned sma switch around. Tbh, I'm not tech savvy enough to understand how either the GPS or bluetooth have been working at all after all this time since my initial installation, but it works like it's supposed to now.
Mic- I ordered another external mic, so whenever it comes in, I'll try to update and see if there are any improvements with the quality, as I've realized my old mic sounded "distant" before when it was connected to my iSimple device.
Initial issue mentioned below:
Hello. I recently purchased this Seicane unit:
[Alibaba (**dot**) com/product/62132856562/10-1-Inch-Android-9-0.html?tracelog=null
I've been having the usual issues that I kind of anticipated with these Chinese head units *(ie. time was not set correctly when I initially installed it but I was able to fix it with an update, steering wheel controls no longer work(fixed), climate settings I press on the unit do not display on the screen but the A/C still works (fixed), just to name a few examples). But one problem I didn't anticipate was, my unit continuously reboots/powers off after I turn on the car and/or the screen may not come on unless I turn the ignition on and off again (fixed). With that being said, the Bluetooth cuts in and out as well and microphone quality is subpar at best, even after using an external mic from a previous isimple unit used with my original navigation unit.
So far, I honestly like this Seicane unit and I don't have buyer's remorse, but these little annoyances are starting to add up. Is there anyway I can fix these issues, especially the annoying rebooting? Thank you.
I recorded what I'm talking about earlier after work today:
youtu (**dot**) be/VvQnOBJGmWM
Click to expand...
Click to collapse
Glad I could help!
chewybits95 said:
Follow up- so I was able to diagnose and fix the majority of the issues I listed thanks to you guys.
In terms of the steering wheel controls, Seicane's engineers failed to switch the steering wheel control settings in the factory settings to "SWC keys" before shipping it out. I found this setting only after attempting to install a universal SWC remote myself, so now I was able to retain both my original controls and the newly installed remote, which is a nice addition now. If you guys ever have issues with the car's original SWC settings when installing your unit, check your settings by going to:
CAR (Driving, navigation some settings) -> Factory Settings (passcode 126) -> Other -> Steering wheel keys assign -> ***Switch to SWC Keys if it's set to Can key***
Note- I'm not sure if the settings will differ per android software, but my unit is Android 9.0
Click to expand...
Click to collapse
IF i switch to SWC Key, i cant assign the keys anymore
Solutions?
EGOiST1991 said:
IF i switch to SWC Key, i cant assign the keys anymore
Solutions?
Click to expand...
Click to collapse
Switch it back to Can Key and see if it you assign the key configurations.
SWC worked before I figured out the two CANBUS wires needed to be switched around but I don't feel the need to test if this will work in my car, so see if that may help.
Sent from my LM-V350 using Tapatalk
CanBus works fine. Every Function works on the 78 Protokoll. Only the Steering Wheel buttons get a "double Input" but i only press once.
And if i switch to protokoll 46 the Steering Wheel Button works perfect but everything else from canbus does not work (Settings for the car)
chewybits95 said:
*******Edit: I was able to resolve most of the issues I've been experiencing with my Android Unit. *******
Incorrect Time- I needed to update my firmware, as suggested by users in the forum. The seller was able to send me an updated version at the time.
SWC- My resolution mentioned down below. I may change it back to CAN key and see if the CANBUS connection issue I had was the real culprit.
Random Power cycling- User error. I didn't realize I didn't plug the power cable completely into the unit.
A/C Display- I have @brettf to thank for this. I initially switched cables like he mentioned below, but found they didn't work THE FIRST TIME I did this, so I switched the cables back to their original [incorrect] positions. The second time around, ie. yesterday, I decided to try it again, but this time, I took into account my CANBUS settings. I changed the CANBUS controls to the last ACCORD_7(Chan........) setting and it finally worked for my system. So, now I understand what most users have been talking about in regards to the temperature only being in Celsius. If there's a fix for this that I may have missed, I'd highly appreciate it.
GPS signal- Lol unintentional user error this time, without realizing I even made a mistake. My unit wasn't labeled with which SMA connector was which for the GPS antenna or Bluetooth antenna, so I had accidentally switched them around during my initial installation. I decided to actually take a look at the diagram on AliBaba's seller page and lo and behold, they were indeed switched around. Previously, it would take over 5 minutes for a signal to be fixed and there was no guarantee it would be stable even on a clear day, but after the switch, the GPS signal is strong and fixes immediately to a signal now.
Bluetooth - Even though I'm not an audiophile, the music played from A2DP sounds even better following the aforementioned sma switch around. Tbh, I'm not tech savvy enough to understand how either the GPS or bluetooth have been working at all after all this time since my initial installation, but it works like it's supposed to now.
Mic- I ordered another external mic, so whenever it comes in, I'll try to update and see if there are any improvements with the quality, as I've realized my old mic sounded "distant" before when it was connected to my iSimple device.
Initial issue mentioned below:
Hello. I recently purchased this Seicane unit:
[Alibaba (**dot**) com/product/62132856562/10-1-Inch-Android-9-0.html?tracelog=null
I've been having the usual issues that I kind of anticipated with these Chinese head units *(ie. time was not set correctly when I initially installed it but I was able to fix it with an update, steering wheel controls no longer work(fixed), climate settings I press on the unit do not display on the screen but the A/C still works (fixed), just to name a few examples). But one problem I didn't anticipate was, my unit continuously reboots/powers off after I turn on the car and/or the screen may not come on unless I turn the ignition on and off again (fixed). With that being said, the Bluetooth cuts in and out as well and microphone quality is subpar at best, even after using an external mic from a previous isimple unit used with my original navigation unit.
So far, I honestly like this Seicane unit and I don't have buyer's remorse, but these little annoyances are starting to add up. Is there anyway I can fix these issues, especially the annoying rebooting? Thank you.
I recorded what I'm talking about earlier after work today:
youtu (**dot**) be/VvQnOBJGmWM
Click to expand...
Click to collapse
The chassis was touching bare wires for random **** I didn't have so it kept resetting. Took me an hour to figure it out. You don't need to spend money just get some tape and make sure all the wires are connected or covered
Ahardyg93 said:
The chassis was touching bare wires for random **** I didn't have so it kept resetting. Took me an hour to figure it out. You don't need to spend money just get some tape and make sure all the wires are connected or covered
Click to expand...
Click to collapse
Lol 420 tho I was smoking too
hello friends, I was wondering if you can help me, my CANbus looks like its working and the steering wheel works too, however, the stereo reboots every 3-4 minutes... the thing is that if I connect something it gets frozen, and a couple of seconds it reboots, if I open an app it gets frozen, if I click on any button of the stereo it will work one or three times but then it gets frozen and reboots it again, I'm not able to listen to anything because the stereo reboots all the time many times... I tried with android 9 same error I updated to android 10 still the error, please can you help me with some ideas, I really believe it is a hardware issue and not software. regards
Head unit: PX6 4/64 GB with Hal9k Android 9.
I have no separate connection for TPMS on the back of my unit, so I ordered a USB TPMS-receiver. The included app on a USB-stick is quite new (202002) but I have only problems with it. So I tried StoreBao from Play Store, the connection works better but I can't stop it from autostarting every time the unit wakes from sleep, tried the USB-settings in the Hal9k mod settings, but no difference.
In the factory settings I have six different choices for TPMS, which enables built in TPMS-apps, and they have nice design and are also translated to the language of the head unit. I have tried all six, restarted in between, and while I do not get any error messages, they just don't seem to recognize the USB-receiver. Maybe there is a "fix" for this?
I am very thankful for any help to get it working, or maybe if someone has another solution for his?
Dasaita makes one for their units and it plugs in directly to the back using a special connector and with use the installed TPMS App. So you can't use this, see Pic.
I have a USB app you could try. I got it when I got my first unit and works fine. I have had it on different units as well and no issues. If you still need it send me a PM.
bsavoir22 said:
Dasaita makes one for their units and it plugs in directly to the back using a special connector and with use the installed TPMS App. So you can't use this, see Pic.
I have a USB app you could try. I got it when I got my first unit and works fine. I have had it on different units as well and no issues. If you still need it send me a PM.
Click to expand...
Click to collapse
Thanks, I will send PM.
@bsavoir22 Hi. Do you know if it is possible to use another tpms system that is from another brand, such as this one, in a dasaita unit?
https://a.aliexpress.com/_BPa9Qx