Database Info

(resolved) Seicane unit keeps rebooting/powering off

*******Edit: I was able to resolve most of the issues I've been experiencing with my Android Unit. *******
Incorrect Time- I needed to update my firmware, as suggested by users in the forum. The seller was able to send me an updated version at the time.
SWC- My resolution mentioned down below. I may change it back to CAN key and see if the CANBUS connection issue I had was the real culprit.
Random Power cycling- User error. I didn't realize I didn't plug the power cable completely into the unit.
A/C Display- I have @brettf to thank for this. I initially switched cables like he mentioned below, but found they didn't work THE FIRST TIME I did this, so I switched the cables back to their original [incorrect] positions. The second time around, ie. yesterday, I decided to try it again, but this time, I took into account my CANBUS settings. I changed the CANBUS controls to the last ACCORD_7(Chan........) setting and it finally worked for my system. So, now I understand what most users have been talking about in regards to the temperature only being in Celsius. If there's a fix for this that I may have missed, I'd highly appreciate it.
GPS signal- Lol unintentional user error this time, without realizing I even made a mistake. My unit wasn't labeled with which SMA connector was which for the GPS antenna or Bluetooth antenna, so I had accidentally switched them around during my initial installation. I decided to actually take a look at the diagram on AliBaba's seller page and lo and behold, they were indeed switched around. Previously, it would take over 5 minutes for a signal to be fixed and there was no guarantee it would be stable even on a clear day, but after the switch, the GPS signal is strong and fixes immediately to a signal now.
Bluetooth - Even though I'm not an audiophile, the music played from A2DP sounds even better following the aforementioned sma switch around. Tbh, I'm not tech savvy enough to understand how either the GPS or bluetooth have been working at all after all this time since my initial installation, but it works like it's supposed to now.
Mic- I ordered another external mic, so whenever it comes in, I'll try to update and see if there are any improvements with the quality, as I've realized my old mic sounded "distant" before when it was connected to my iSimple device.
Initial issue mentioned below:
Hello. I recently purchased this Seicane unit:
[Alibaba (**dot**) com/product/62132856562/10-1-Inch-Android-9-0.html?tracelog=null
I've been having the usual issues that I kind of anticipated with these Chinese head units *(ie. time was not set correctly when I initially installed it but I was able to fix it with an update, steering wheel controls no longer work(fixed), climate settings I press on the unit do not display on the screen but the A/C still works (fixed), just to name a few examples). But one problem I didn't anticipate was, my unit continuously reboots/powers off after I turn on the car and/or the screen may not come on unless I turn the ignition on and off again (fixed). With that being said, the Bluetooth cuts in and out as well and microphone quality is subpar at best, even after using an external mic from a previous isimple unit used with my original navigation unit.
So far, I honestly like this Seicane unit and I don't have buyer's remorse, but these little annoyances are starting to add up. Is there anyway I can fix these issues, especially the annoying rebooting? Thank you.
I recorded what I'm talking about earlier after work today:
youtu (**dot**) be/VvQnOBJGmWM

Anything at all?

chewybits95 said:
Anything at all?
Click to expand...
Click to collapse
Have you tried returning it, or lodging a dispute with the reseller?

marchnz said:
Have you tried returning it, or lodging a dispute with the reseller?
Click to expand...
Click to collapse
I didn't want to go that route yet until I troubleshoot it myself. Plus, shipping to China is expensive, so that'll be my last ditch solution if I'm not able to figure out these menial issues.

Others here have experienced these problems you should be able to find their threads. From what I've read before the rebooting was linked to the HU losing internet access but those were units with a SIM card port. Setting airplane mode helped when they had no SIM and/or were connected to the phone hotspot. But if there's a problem with a SIM in relocating the antennas was needed otherwise the unit needs repair.
For the HVAC display you need a CANbus decoder specific to your car. It's not unusual for a seller to not include it unless you told them you need it. You have to be very literal and specific with them. One guy received the wrong one and only fixed it by convincing another seller (Dasaita) to sell him one. In your case it worked before and no more after the update then you may need to try different settings in the CANbus menu. Did you get your update from Seicane? If not you should ask them for one.

nic2k said:
...
For the HVAC display you need a CANbus decoder specific to your car. It's not unusual for a seller to not include it unless you told them you need it. You have to be very literal and specific with them. One guy received the wrong one and only fixed it by convincing another seller (Dasaita) to sell him one. In your case it worked before and no more after the update then you may need to try different settings in the CANbus menu. Did you get your update from Seicane? If not you should ask them for one.
Click to expand...
Click to collapse
I don't think this is the case here. I have the same unit as OP.
Check this thread regarding the Climate Control display issue: https://forum.xda-developers.com/an...1-android-8-2003-accord-t3923783/post79786553

brettf said:
I don't think this is the case here. I have the same unit as OP.
Check this thread regarding the Climate Control display issue: https://forum.xda-developers.com/an...1-android-8-2003-accord-t3923783/post79786553
Click to expand...
Click to collapse
How would I go about actually changing the wires around though? Do I just pull them out of the harness? Lol, I'm not an electrician, so I would prefer not to break the unit.

I may have figured out the rebooting issue: when I went back to finally check the back of the unit, I found the power cable with the blue harness wasn't completely connected to the unit. Whoops, lol!
I'll test it out whenever I drive my accord again and see if this definitely fixed the rebooting issue.

chewybits95 said:
How would I go about actually changing the wires around though? Do I just pull them out of the harness? Lol, I'm not an electrician, so I would prefer not to break the unit.
Click to expand...
Click to collapse
Just pop them out of the connector. There's a little tab on the metal bit inside the connector. If you press it and pull the wire softly, it will pop out.

brettf said:
Just pop them out of the connector. There's a little tab on the metal bit inside the connector. If you press it and pull the wire softly, it will pop out.
Click to expand...
Click to collapse
I was able to pop them out like you mentioned, but no changes. Luckily the a/c still works, so I guess I'll just leave it as is for now... Thank you for the guidance.

Follow up- so I was able to diagnose and fix the majority of the issues I listed thanks to you guys.
In terms of the steering wheel controls, Seicane's engineers failed to switch the steering wheel control settings in the factory settings to "SWC keys" before shipping it out. I found this setting only after attempting to install a universal SWC remote myself, so now I was able to retain both my original controls and the newly installed remote, which is a nice addition now. If you guys ever have issues with the car's original SWC settings when installing your unit, check your settings by going to:
CAR (Driving, navigation some settings) -> Factory Settings (passcode 126) -> Other -> Steering wheel keys assign -> ***Switch to SWC Keys if it's set to Can key***
Note- I'm not sure if the settings will differ per android software, but my unit is Android 9.0

chewybits95 said:
I was able to pop them out like you mentioned, but no changes. Luckily the a/c still works, so I guess I'll just leave it as is for now... Thank you for the guidance.
Click to expand...
Click to collapse
You should also make sure your car profile is "116 Accord 7" under factory settings - canbus

chewybits95 said:
*******Edit: I was able to resolve most of the issues I've been experiencing with my Android Unit. *******
Incorrect Time- I needed to update my firmware, as suggested by users in the forum. The seller was able to send me an updated version at the time.
SWC- My resolution mentioned down below. I may change it back to CAN key and see if the CANBUS connection issue I had was the real culprit.
Random Power cycling- User error. I didn't realize I didn't plug the power cable completely into the unit.
A/C Display- I have @brettf to thank for this. I initially switched cables like he mentioned below, but found they didn't work THE FIRST TIME I did this, so I switched the cables back to their original [incorrect] positions. The second time around, ie. yesterday, I decided to try it again, but this time, I took into account my CANBUS settings. I changed the CANBUS controls to the last ACCORD_7(Chan........) setting and it finally worked for my system. So, now I understand what most users have been talking about in regards to the temperature only being in Celsius. If there's a fix for this that I may have missed, I'd highly appreciate it.
GPS signal- Lol unintentional user error this time, without realizing I even made a mistake. My unit wasn't labeled with which SMA connector was which for the GPS antenna or Bluetooth antenna, so I had accidentally switched them around during my initial installation. I decided to actually take a look at the diagram on AliBaba's seller page and lo and behold, they were indeed switched around. Previously, it would take over 5 minutes for a signal to be fixed and there was no guarantee it would be stable even on a clear day, but after the switch, the GPS signal is strong and fixes immediately to a signal now.
Bluetooth - Even though I'm not an audiophile, the music played from A2DP sounds even better following the aforementioned sma switch around. Tbh, I'm not tech savvy enough to understand how either the GPS or bluetooth have been working at all after all this time since my initial installation, but it works like it's supposed to now.
Mic- I ordered another external mic, so whenever it comes in, I'll try to update and see if there are any improvements with the quality, as I've realized my old mic sounded "distant" before when it was connected to my iSimple device.
Initial issue mentioned below:
Hello. I recently purchased this Seicane unit:
[Alibaba (**dot**) com/product/62132856562/10-1-Inch-Android-9-0.html?tracelog=null
I've been having the usual issues that I kind of anticipated with these Chinese head units *(ie. time was not set correctly when I initially installed it but I was able to fix it with an update, steering wheel controls no longer work(fixed), climate settings I press on the unit do not display on the screen but the A/C still works (fixed), just to name a few examples). But one problem I didn't anticipate was, my unit continuously reboots/powers off after I turn on the car and/or the screen may not come on unless I turn the ignition on and off again (fixed). With that being said, the Bluetooth cuts in and out as well and microphone quality is subpar at best, even after using an external mic from a previous isimple unit used with my original navigation unit.
So far, I honestly like this Seicane unit and I don't have buyer's remorse, but these little annoyances are starting to add up. Is there anyway I can fix these issues, especially the annoying rebooting? Thank you.
I recorded what I'm talking about earlier after work today:
youtu (**dot**) be/VvQnOBJGmWM
Click to expand...
Click to collapse
Glad I could help!

chewybits95 said:
Follow up- so I was able to diagnose and fix the majority of the issues I listed thanks to you guys.
In terms of the steering wheel controls, Seicane's engineers failed to switch the steering wheel control settings in the factory settings to "SWC keys" before shipping it out. I found this setting only after attempting to install a universal SWC remote myself, so now I was able to retain both my original controls and the newly installed remote, which is a nice addition now. If you guys ever have issues with the car's original SWC settings when installing your unit, check your settings by going to:
CAR (Driving, navigation some settings) -> Factory Settings (passcode 126) -> Other -> Steering wheel keys assign -> ***Switch to SWC Keys if it's set to Can key***
Note- I'm not sure if the settings will differ per android software, but my unit is Android 9.0
Click to expand...
Click to collapse
IF i switch to SWC Key, i cant assign the keys anymore
Solutions?

EGOiST1991 said:
IF i switch to SWC Key, i cant assign the keys anymore
Solutions?
Click to expand...
Click to collapse
Switch it back to Can Key and see if it you assign the key configurations.
SWC worked before I figured out the two CANBUS wires needed to be switched around but I don't feel the need to test if this will work in my car, so see if that may help.
Sent from my LM-V350 using Tapatalk

CanBus works fine. Every Function works on the 78 Protokoll. Only the Steering Wheel buttons get a "double Input" but i only press once.
And if i switch to protokoll 46 the Steering Wheel Button works perfect but everything else from canbus does not work (Settings for the car)

chewybits95 said:
*******Edit: I was able to resolve most of the issues I've been experiencing with my Android Unit. *******
Incorrect Time- I needed to update my firmware, as suggested by users in the forum. The seller was able to send me an updated version at the time.
SWC- My resolution mentioned down below. I may change it back to CAN key and see if the CANBUS connection issue I had was the real culprit.
Random Power cycling- User error. I didn't realize I didn't plug the power cable completely into the unit.
A/C Display- I have @brettf to thank for this. I initially switched cables like he mentioned below, but found they didn't work THE FIRST TIME I did this, so I switched the cables back to their original [incorrect] positions. The second time around, ie. yesterday, I decided to try it again, but this time, I took into account my CANBUS settings. I changed the CANBUS controls to the last ACCORD_7(Chan........) setting and it finally worked for my system. So, now I understand what most users have been talking about in regards to the temperature only being in Celsius. If there's a fix for this that I may have missed, I'd highly appreciate it.
GPS signal- Lol unintentional user error this time, without realizing I even made a mistake. My unit wasn't labeled with which SMA connector was which for the GPS antenna or Bluetooth antenna, so I had accidentally switched them around during my initial installation. I decided to actually take a look at the diagram on AliBaba's seller page and lo and behold, they were indeed switched around. Previously, it would take over 5 minutes for a signal to be fixed and there was no guarantee it would be stable even on a clear day, but after the switch, the GPS signal is strong and fixes immediately to a signal now.
Bluetooth - Even though I'm not an audiophile, the music played from A2DP sounds even better following the aforementioned sma switch around. Tbh, I'm not tech savvy enough to understand how either the GPS or bluetooth have been working at all after all this time since my initial installation, but it works like it's supposed to now.
Mic- I ordered another external mic, so whenever it comes in, I'll try to update and see if there are any improvements with the quality, as I've realized my old mic sounded "distant" before when it was connected to my iSimple device.
Initial issue mentioned below:
Hello. I recently purchased this Seicane unit:
[Alibaba (**dot**) com/product/62132856562/10-1-Inch-Android-9-0.html?tracelog=null
I've been having the usual issues that I kind of anticipated with these Chinese head units *(ie. time was not set correctly when I initially installed it but I was able to fix it with an update, steering wheel controls no longer work(fixed), climate settings I press on the unit do not display on the screen but the A/C still works (fixed), just to name a few examples). But one problem I didn't anticipate was, my unit continuously reboots/powers off after I turn on the car and/or the screen may not come on unless I turn the ignition on and off again (fixed). With that being said, the Bluetooth cuts in and out as well and microphone quality is subpar at best, even after using an external mic from a previous isimple unit used with my original navigation unit.
So far, I honestly like this Seicane unit and I don't have buyer's remorse, but these little annoyances are starting to add up. Is there anyway I can fix these issues, especially the annoying rebooting? Thank you.
I recorded what I'm talking about earlier after work today:
youtu (**dot**) be/VvQnOBJGmWM
Click to expand...
Click to collapse
The chassis was touching bare wires for random **** I didn't have so it kept resetting. Took me an hour to figure it out. You don't need to spend money just get some tape and make sure all the wires are connected or covered

Ahardyg93 said:
The chassis was touching bare wires for random **** I didn't have so it kept resetting. Took me an hour to figure it out. You don't need to spend money just get some tape and make sure all the wires are connected or covered
Click to expand...
Click to collapse
Lol 420 tho I was smoking too

hello friends, I was wondering if you can help me, my CANbus looks like its working and the steering wheel works too, however, the stereo reboots every 3-4 minutes... the thing is that if I connect something it gets frozen, and a couple of seconds it reboots, if I open an app it gets frozen, if I click on any button of the stereo it will work one or three times but then it gets frozen and reboots it again, I'm not able to listen to anything because the stereo reboots all the time many times... I tried with android 9 same error I updated to android 10 still the error, please can you help me with some ideas, I really believe it is a hardware issue and not software. regards

Is it possible to use the built in TPMS apps for USB-receiver?

Head unit: PX6 4/64 GB with Hal9k Android 9.
I have no separate connection for TPMS on the back of my unit, so I ordered a USB TPMS-receiver. The included app on a USB-stick is quite new (202002) but I have only problems with it. So I tried StoreBao from Play Store, the connection works better but I can't stop it from autostarting every time the unit wakes from sleep, tried the USB-settings in the Hal9k mod settings, but no difference.
In the factory settings I have six different choices for TPMS, which enables built in TPMS-apps, and they have nice design and are also translated to the language of the head unit. I have tried all six, restarted in between, and while I do not get any error messages, they just don't seem to recognize the USB-receiver. Maybe there is a "fix" for this?
I am very thankful for any help to get it working, or maybe if someone has another solution for his?

Dasaita makes one for their units and it plugs in directly to the back using a special connector and with use the installed TPMS App. So you can't use this, see Pic.
I have a USB app you could try. I got it when I got my first unit and works fine. I have had it on different units as well and no issues. If you still need it send me a PM.

bsavoir22 said:
Dasaita makes one for their units and it plugs in directly to the back using a special connector and with use the installed TPMS App. So you can't use this, see Pic.
I have a USB app you could try. I got it when I got my first unit and works fine. I have had it on different units as well and no issues. If you still need it send me a PM.
Click to expand...
Click to collapse
Thanks, I will send PM.

@bsavoir22 Hi. Do you know if it is possible to use another tpms system that is from another brand, such as this one, in a dasaita unit?
https://a.aliexpress.com/_BPa9Qx

PX6 MX MCU update failed

Hi there
So i downloaded from here MCU MX v3.71 as i have v3.60_1 at the moment.
Formatted a 4GB USB stick as FAT32, default allocation list and copied dmcu.img on the root of the USB
Then, inserted the stick into HU USB port, clicked on MCU update, it was found, system restarted.
next ? surprise: Android green guy dead, and "no command" on the screen.
I shut down the car for 5 mins to let the unit go to sleep and when i put the ignition on, the unit started fine, but still having old MCU
next, i plugged the USB stick into my computer and surprise: "this disc needs to be formatted".
Somehow, android unit didn't update the MCU but damaged the USB stick filesystem.
Did anyone have the same issue ? I am afraid now to use a different USB and repeat the process because my reset button is inside the screen and i need to dismantle half the dashboard to reach that button.
I have an AOTSR PX6 RK3399 unit with Android 10 and HCT2 kernel (firmware), MCU is MX v3.60
Thanks

tox2k4 said:
Hi there
So i downloaded from here MCU MX v3.71 as i have v3.60_1 at the moment.
Formatted a 4GB USB stick as FAT32, default allocation list and copied dmcu.img on the root of the USB
Then, inserted the stick into HU USB port, clicked on MCU update, it was found, system restarted.
next ? surprise: Android green guy dead, and "no command" on the screen.
I shut down the car for 5 mins to let the unit go to sleep and when i put the ignition on, the unit started fine, but still having old MCU
next, i plugged the USB stick into my computer and surprise: "this disc needs to be formatted".
Somehow, android unit didn't update the MCU but damaged the USB stick filesystem.
Did anyone have the same issue ? I am afraid now to use a different USB and repeat the process because my reset button is inside the screen and i need to dismantle half the dashboard to reach that button.
I have an AOTSR PX6 RK3399 unit with Android 10 and HCT2 kernel (firmware), MCU is MX v3.60
Thanks
Click to expand...
Click to collapse
What issue do you think will be resolved by updating the MCU? The MCU isn't Android.

my Waze app keeps crashing... i know that this issue might be from the firmware but i have a 2 unit pieces for Opel Astra J, it has a original fitting HU with DVD player which connects with 2 lots of pin cables to the display, and no reset button or hole. So is not a 1 unit Android, is 2 pieces. All main cables come from the big HU which sits instead of the original HU
I am really afraid to put another Android 10 firmware as i don't know how to enter recovery if something goes wrong

tox2k4 said:
my Waze app keeps crashing... i know that this issue might be from the firmware but i have a 2 unit pieces for Opel Astra J, it has a original fitting HU with DVD player which connects with 2 lots of pin cables to the display, and no reset button or hole. So is not a 1 unit Android, is 2 pieces. All main cables come from the big HU which sits instead of the original HU
I am really afraid to put another Android 10 firmware as i don't know how to enter recovery if something goes wrong
Click to expand...
Click to collapse
You've confused MCU with Android. At that point, I agree, leave it as is.

tox2k4 said:
Hi there
So i downloaded from here MCU MX v3.71 as i have v3.60_1 at the moment.
Formatted a 4GB USB stick as FAT32, default allocation list and copied dmcu.img on the root of the USB
Then, inserted the stick into HU USB port, clicked on MCU update, it was found, system restarted.
next ? surprise: Android green guy dead, and "no command" on the screen.
I shut down the car for 5 mins to let the unit go to sleep and when i put the ignition on, the unit started fine, but still having old MCU
next, i plugged the USB stick into my computer and surprise: "this disc needs to be formatted".
Somehow, android unit didn't update the MCU but damaged the USB stick filesystem.
Did anyone have the same issue ? I am afraid now to use a different USB and repeat the process because my reset button is inside the screen and i need to dismantle half the dashboard to reach that button.
I have an AOTSR PX6 RK3399 unit with Android 10 and HCT2 kernel (firmware), MCU is MX v3.60
Thanks
Click to expand...
Click to collapse
hi, i have same AOTSR headunit, can you please post the url where you have downloaded MCU MX v3.71, thanks

tox2k4 said:
my Waze app keeps crashing... i know that this issue might be from the firmware but i have a 2 unit pieces for Opel Astra J, it has a original fitting HU with DVD player which connects with 2 lots of pin cables to the display, and no reset button or hole. So is not a 1 unit Android, is 2 pieces. All main cables come from the big HU which sits instead of the original HU
I am really afraid to put another Android 10 firmware as i don't know how to enter recovery if something goes wrong
Click to expand...
Click to collapse
same here, Waze keep crashing randomly

vralvi said:
hi, i have same AOTSR headunit, can you please post the url where you have downloaded MCU MX v3.71, thanks
Click to expand...
Click to collapse
No, search for it.

vralvi said:
same here, Waze keep crashing randomly
Click to expand...
Click to collapse
here is thread: https://forum.xda-developers.com/t/...ith-mx-or-mx2-to-use-it.3913654/post-84413769
I only wanted to update the MCU because it is the last version, but this does not manage applications, it's the ROM that does that, as marchnz said.
You may need to ask from your seller support a newer version of the ROM you are running. I did the same but the language barrier is huge, i did not solve anything OR install a custom rom such as Malaysk ROM. I read somewhere here that Waze app needs to be downloaded from Aptoide and has to be a specific version for it to work but i cannot recall which thread was it.

tox2k4 said:
here is thread: https://forum.xda-developers.com/t/...ith-mx-or-mx2-to-use-it.3913654/post-84413769
I only wanted to update the MCU because it is the last version, but this does not manage applications, it's the ROM that does that, as marchnz said.
You may need to ask from your seller support a newer version of the ROM you are running. I did the same but the language barrier is huge, i did not solve anything OR install a custom rom such as Malaysk ROM. I read somewhere here that Waze app needs to be downloaded from Aptoide and has to be a specific version for it to work but i cannot recall which thread was it.
Click to expand...
Click to collapse
thank you

tox2k4 said:
here is thread: https://forum.xda-developers.com/t/...ith-mx-or-mx2-to-use-it.3913654/post-84413769
I only wanted to update the MCU because it is the last version, but this does not manage applications, it's the ROM that does that, as marchnz said.
You may need to ask from your seller support a newer version of the ROM you are running. I did the same but the language barrier is huge, i did not solve anything OR install a custom rom such as Malaysk ROM. I read somewhere here that Waze app needs to be downloaded from Aptoide and has to be a specific version for it to work but i cannot recall which thread was it.
Click to expand...
Click to collapse
MCU MX v3.71 worked on my unit, i upgraded from 3.60 with no issues

Question CC3 Skoda Superb 3 Model 2016

Hi at all.
I have recently built in a CC3 device.
And I have some questions about hardware and software. Maybe someone can help.
1: why is it, that the screen for air-conditioning, temperature etc. spontaneously pops up and don't dissappear by itself?
2: why is there only beep sounds from the parking distance control and no car symbol with colored waves (green to red)
3: why can't I choose YouTube as music widget, as described in teyes installation videos
4: can I change the widgets at all? New functions like whether forecast or GPS status instead of radio stations
Thanks in advance.
Greets, Sebastian

Hi i have similar problems with a skoda superb 3 2017, i am trying to find a good canbus configuration. Now i can see all car settings, cannot see call log, microphone is low, no graphics and beeps from rear sensors, volum from drive wheel is reversed.
I have tried both with rzc canbus and hi world canbus.
I have installed the aditional mic still same,
If i install the sim i can used only for data,
Please advise if i have to update it or anything to make it better, so far i want to uninstall it and use oem.

Hi Sebytech, I didn't found any solution so far. I am in contact with the support from AU and waiting for an answer. And still waiting for my MOST adapter. Have no sound at all.
But my vol. button is working.

No sound? Can you show me a few pics with what you have? And the settings of the canbus? I personally purchased another adapter and stereo sound inhave fromthe one purchased from au. My volume works from steering wheel is just upside down. Not sure if i need to do mcu update

Sebytech said:
Hi i have similar problems with a skoda superb 3 2017, i am trying to find a good canbus configuration. Now i can see all car settings, cannot see call log, microphone is low, no graphics and beeps from rear sensors, volum from drive wheel is reversed.
Click to expand...
Click to collapse
Volume reverse is a setting: Factory -> Reversal Volume.
Same for reversal previous-next. Factory -> Reversal previous next
And if you have a CC3, why don't you read and watch the instructions and instruction videos: https://cc3.teyes.ru/en/index.html

Sebytech said:
No sound? Can you show me a few pics with what you have? And the settings of the canbus? I personally purchased another adapter and stereo sound inhave fromthe one purchased from au. My volume works from steering wheel is just upside down. Not sure if i need to do mcu update
Click to expand...
Click to collapse
I have no sound, because I have a built in canton sound system and digital amplifier. My quadlock connector has therefore no cables to each respective speaker. The sound is transfered to the amplifier by lightwire. When I ordered the CC3 I didn't know much about this and there was no hint on the order page. Due to a German skoda superb forum, someone told me about the need of an MOST adapter. Teyes has such an adapter in their store. I still waiting for it.
What else I am wondering about, is that the pins in my quadlock adapter is no respectively not the same as in the adapter from Teyes and some pins go nowhere. So I think, some functions are missing from the beginning.

I had a little research but, this last pic looks like a power right ? the harness, everything is the same as i have except that plug, anything else related to the amp ?

surfer63 said:
Volume reverse is a setting: Factory -> Reversal Volume.
Same for reversal previous-next. Factory -> Reversal previous next
And if you have a CC3, why don't you read and watch the instructions and instruction videos: https://cc3.teyes.ru/en/index.html
Click to expand...
Click to collapse
Thank you, i will check that, i have check everything that is on the website, instructions are minimal, not everything is plug and play, any idea how to download the latest software? i have the latest mcu firmware but it always says invalid serial it.
thank you

SchaafBaeh said:
I have no sound, because I have a built in canton sound system and digital amplifier. My quadlock connector has therefore no cables to each respective speaker. The sound is transfered to the amplifier by lightwire. When I ordered the CC3 I didn't know much about this and there was no hint on the order page. Due to a German skoda superb forum, someone told me about the need of an MOST adapter. Teyes has such an adapter in their store. I still waiting for it.
What else I am wondering about, is that the pins in my quadlock adapter is no respectively not the same as in the adapter from Teyes and some pins go nowhere. So I think, some functions are missing from the beginning.
Click to expand...
Click to collapse
apologize, did you meant optical fiber?

Sebytech said:
apologize, did you meant optical fiber?
Click to expand...
Click to collapse
Oh, sorry. Your right. I wasn't so sure about the coorect term to translate it from German to English.

Sebytech said:
I had a little research but, this last pic looks like a power right ? the harness, everything is the same as i have except that plug, anything else related to the amp ?
Click to expand...
Click to collapse
No, this plug is the optical fiber plug. For this I purchased the Teyes Most 25 adapter. Hope, it will soon arrive.

SchaafBaeh said:
No, this plug is the optical fiber plug. For this I purchased the Teyes Most 25 adapter. Hope, it will soon arrive.
Click to expand...
Click to collapse
Yes i had a look on the web for some adapters..not really much about them.
Any idea about how to download latest software ?
Have you tested yours with phone calls ?

Sebytech said:
Yes i had a look on the web for some adapters..not really much about them.
Any idea about how to download latest software ?
Have you tested yours with phone calls ?
Click to expand...
Click to collapse
My sim card and wlan are working fine. So I opened the app Futo and checked for new versions (automatic updater) . After download and installation I opened teyes and downloaded the latest versions of all other apps.
Because I have no sound so far, I could no test it with sound. But as I received a phone call (phone was connected via BT) the CC3 showed me all needed buttons know for accepting/cancelling and ending a call.

I think i have a old version on mine, cannot find FOTA.

Can't you download it from their website?

SchaafBaeh said:
Can't you download it from their website?
Click to expand...
Click to collapse
I have spent the last few days to find all kinds of info in regards canbus, settings, mic settings, bluetooth settings, anything on their website is useless. either they have sold me a diff unit.. don`t know yet..took me a month to make it work..bad company

Sebytech said:
I have spent the last few days to find all kinds of info in regards canbus, settings, mic settings, bluetooth settings, anything on their website is useless. either they have sold me a diff unit.. don`t know yet..took me a month to make it work..bad company
Click to expand...
Click to collapse
Oh, ok. That's bad. And the support named Dan can't help you?

SchaafBaeh said:
Oh, ok. That's bad. And the support named Dan can't help you?
Click to expand...
Click to collapse
I am not sure, i do not know him and takes days for support to answer, i am not sure about this forum if anybody will help, but be aware about the following issue you might have with yours. Bluetooth connection will show phone but no dial list on dash, on the cc3 while on call the dial conversation stays on top..you need external mic, apparently will not use the oem one ..hopefully you will have better luck than me, i am almost there to go back to oem and just leave it...sim with lte its only for data only no phone calls. what is the point to have just data ? would have been nice to connect with the canbus and show on dash as cc3 and be able to make phone calls. Also why have a mic on the unit ? mic has to be close to u and well protected..
update me when you have setup.

Ok. I will. Have a nice day anyway.

Sebytech said:
Thank you, i will check that, i have check everything that is on the website, instructions are minimal, not everything is plug and play, any idea how to download the latest software? i have the latest mcu firmware but it always says invalid serial it.
thank you
Click to expand...
Click to collapse
Email Teyes directly and ask them for support. They have your data.
Only try via Dan if you purchased via Dan.

General AA on Chinese head unit

Hi, I have a Chinese android head unit, I've fitted it in my van, all good apart from the one thing I wanted...Android Auto. Allegedly it's come with Android Auto installed. My phone and cable work fine in my car, and Auto connect to Android Auto, but not on this Android head unit I've fitted. I naively thought I could plug my phone in and it automatically start up but nothing happens, everything else on the head unit, I've worked out, and is fine. It's probably a set up problem, I'm wondering about an APL file, but I just don't know what to do and the instructions that came with it are not much help, I would appreciate a point in the right direction pls

Scrapman326 said:
Hi, I have a Chinese android head unit, I've fitted it in my van, all good apart from the one thing I wanted...Android Auto. Allegedly it's come with Android Auto installed. My phone and cable work fine in my car, and Auto connect to Android Auto, but not on this Android head unit I've fitted. I naively thought I could plug my phone in and it automatically start up but nothing happens, everything else on the head unit, I've worked out, and is fine. It's probably a set up problem, I'm wondering about an APL file, but I just don't know what to do and the instructions that came with it are not much help, I would appreciate a point in the right direction pls
Click to expand...
Click to collapse
I meant APK file, I've seen them but don't know what to do (if that is the issue)

Is it an FYT unit. Post Android system information including MCU version

@marchnz is right. Tell us what you have. There are a lot of different units.
Scrapman326 said:
I meant APK file, I've seen them but don't know what to do (if that is the issue)
Click to expand...
Click to collapse
It does not work automatically on these Chinese head utnits.
You first have to pair it to bluetooth.
Then you connect it via USB.
Then you start the z-link or carlink app, whatever it is called on your unit (and that is why we need to know what your unit is).
Then it should work.

surfer63 said:
@marchnz is right. Tell us what you have. There are a lot of different units.
It does not work automatically on these Chinese head utnits.
You first have to pair it to bluetooth.
Then you connect it via USB.
Then you start the z-link or carlink app, whatever it is called on your unit (and that is why we need to know what your unit is).
Then it should work.
Click to expand...
Click to collapse
Thanks, I’ll find the Android version and MCU (whatever that is), bare with me, thanks for the response, Bluetooth is paired, I can make calls via the head unit that way, and I connect via USB just as I do in my car, I haven’t seen a link for zlink or the android auto logo ?, all my phone does when I plug in is charge, there are two usb sockets on the back of the unit, 4 wire and five wire, my DAB aerial is plugged in the 4 wire and is working ok, my phone is in the five wire USB, I did swap them round , it made no difference, I’ll come back with MCU and Android version, thanks again, it’s a Brosmartek XRC-T3 06FuTe (that’s exactly what’s on the box) if that helps. I’ve found previously that purchases such as this come with very, very basic instructions, virtually zero.

If I search on your Brosmartek XRC-T3, the adds say you need to download the EasyConnect.apk. Did you do that?

surfer63 said:
@marchnz is right. Tell us what you have. There are a lot of different units.
It does not work automatically on these Chinese head utnits.
You first have to pair it to bluetooth.
Then you connect it via USB.
Then you start the z-link or carlink app, whatever it is called on your unit (and that is why we need to know what your unit is).
Then it should work.
Click to expand...
Click to collapse
Hi, I got it sorted, I hot spotted the unit off my phone and updated it, then I thought about z-link that you mentioned and recalled seeing Tlink5 ... I went into settings and changed from Google maps to the mysterious Tlink5 and hey presto...Tlink5 is required for Carplay and Android Auto. Everything is good now, such a shame that it's not in the instructions, then again what little instructions there was , was no help. Thanks for all your help, it was the Z-link mention that just got me wondering. "Tlink5"... who would have thought it.