Database Info

no boot CMW, Only Download Mode

I commented that from one day to the other my phone stopped responding while booted and my logo appears Telephony (CLARO ARGENTINA) keeps the samsung logo and does not start over. The tests were to raise the custom recovery, but does not start the screen stays black, so I decided to install nuevamante, but throws the following error:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
and leave it there for about 1 hour and nothing.
I said well you reinstall the system 0, from the unbranded of course, but throws the following:
<ID:0/005> Added!! <OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBDLJ2_I9300UBDLI2_I9300UVCDLJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
The issue is that the light equipment, ie load the logo of the company, and the samsung logo stays long.
The thing is that I load the cwm, there cyanogem install any rom or another by. Tar.md5 than the original?
another that occurred to me is whether it is possible to install the CMW from a Micro SD, and lift the OS from there!
Just probe with CWM-Recovery-LTE-SGS3-v5.tar.md5, pass and shoot, but do not lift the CWM
*
*
Added <ID:0/007>!
<OSM> Enter CS for MD5 ..
<OSM> Check MD5 .. Do not unplug the cord ..
<OSM> Please wait ..
<OSM> CWM-Recovery-LTE-SGS3-v5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully ..
<OSM> Leave CS ..
<ID:0/007> Odin v.3 engine (ID: 7) ..
<ID:0/007> File analysis ..
<ID:0/007> SetupConnection ..
<ID:0/007> Initialzation ..
<ID:0/007> Get PIT for mapping ..
<ID:0/007> Firmware update start ..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
RQT_CLOSE <ID:0/007>!
RES <ID:0/007> OK!!
Removed <ID:0/007>!
Remain <ID:0/007> Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Exactly, only between DW mode, then to not enter recovery mode, but the strange thing is that the phone starts but is labeled in the samsung logo.
Also try to get into safe mode by pressing the home, but does not start the key vibration.
It's a case sooo weird.
*
Thanks for everything!

Norwegian S6 Bricked

Hi, i have a Norwegian Samsung Galaxy S6 and tried to root it using the SM-G920F files from CF-Auto-Root but it didnt work and now my phone wont start with the message: "Recover is not seandroid enforcing" where it says "Samsunng Galaxy S6
Powered by Android". I have tried all the SM-G920F Stock firmwares here but unable to install them, maybe my device should have been rooted before this? Is there i way i can fix my phone now? I cant even shut it down anymore :/
I have tried to follow this guide: autoroot.chainfire but it didnt work and now i have tried to use the UK/spain/Every-Stock-Firmware-for-the-G920F-i-Can-Find.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOCZ_G920FVFG1AOC4_G920FXXU1AOCW_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
On the phone itself it says "SW REV. CHECK FAIL. DEVICE:2 BINARY:1
With red text.
Is what ODIN3 v3.10 is saying.

To shut down S6 from download mode press volume down + power button at the same time and hold until screen turns off.
After this you have an option to:
1. Bring your S6 bacck to Samsung for warranty repair.
2. Use a different USB cable or try a different USB port then reflash again.
I hope this helps.

roydok said:
To shut down S6 from download mode press volume down + power button at the same time and hold until screen turns off.
After this you have an option to:
1. Bring your S6 bacck to Samsung for warranty repair.
2. Use a different USB cable or try a different USB port then reflash again.
I hope this helps.
Click to expand...
Click to collapse
It Says KNOX warranty void 1, this means that warranty is broken? I am going to get my original samsung s6 USB cable tomorrow to try.

Install twrp and port any costum room and you will fix your s6...
Or download newest version in sammobile of g920f stock firmware. You are failing at sboot. That mean bootloader in the phone os newer than the one you trying to install

Now it does not fail right away, but it still fails after a short while. Will the process fail if i don't do anything on the device itself? Because now it starts doing something in Odin, but returns fail after a while, but i am not with the phone as it is home right now.

This is what ODIN says now:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU2BOFL_G920FOJV2BOEE_G920FXXU2BOFJ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Try redownloading your ROM. There might be errors in the file resulting from the download.

[Help] Galaxy S 6 G920W8 stuck on SAMSUNG logo during boot

So I have a samsung Galaxy S 6 (G920W8) that I cannot get to boot into Android.
I was able to get the device into recovery and download mode, and I'm able to install TWRP on the device, boots into that with zero problems.
I've been able to use TWRP to install custom ROMs and kernels, and I can use an older version of ODIN to flash the correct carrier ROM to the phone, but newer version fail on the NAND WRITE step. TWRP gives no errors when attempting to flash, and I have access to the whole memory of the device.
Is there any hope for this device?

Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU3BOL1_G920W8OYA3BOL1_G920W8VLU3BOL1_HOME.tar.md5 is invalid.
<OSM> End...
<Accidentally tried adding file before it was done unzipping>
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
That's the result in Odin after trying to flash that carrier ROM with Odin3 v3.10.7. Now the device is still boot looping. I don't understand what's wrong.

DisturbenChamp said:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU3BOL1_G920W8OYA3BOL1_G920W8VLU3BOL1_HOME.tar.md5 is invalid.
<OSM> End...
<Accidentally tried adding file before it was done unzipping>
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
That's the result in Odin after trying to flash that carrier ROM with Odin3 v3.10.7. Now the device is still boot looping. I don't understand what's wrong.
Click to expand...
Click to collapse
Boot into recovery and factory reset.
Sent from my SM-G925F

Rosli59564 said:
Boot into recovery and factory reset.
Sent from my SM-G925F
Click to expand...
Click to collapse
I have tried that. The device continues to boot loop, even when wiped through official recovery or TWRP recovery.

DisturbenChamp said:
I have tried that. The device continues to boot loop, even when wiped through official recovery or TWRP recovery.
Click to expand...
Click to collapse
Try to reinitialize the phone with smart switch. Maybe it's the firmware you flashed with odin.
Sent from my SM-G925F

Rosli59564 said:
Try to reinitialize the phone with smart switch. Maybe it's the firmware you flashed with odin.
Sent from my SM-G925F
Click to expand...
Click to collapse
Smart Switch nor Kies will connect to the device., but odin and MTP via TWRP both work. I've attempted a 5.0.2 and 5.1.1 ROM from the carrier, the ROMs are from Sam-Firmware, and I am currently downloading a 6.0.1 file to attempt and flash..
Sometimes in Download mode it displays the following error:
Code:
SW REV CHECK FAIL. DEVICE: 3, BINARY: 1
OR
SW REV CHECK FAIL. DEVICE: 3, BINARY: 2

help

Phone : Samsung Galaxy S6 Edge +
Model Name : SM-G928C
Phone Country : United Arab Emirates
Product Code : XSG
PDA : QA5
What happened? : my mother always turning off the phone if she's not using it so there's a running update on this phone then she turn off the phone while updating (note she's not techy so she didnt know what she was doing) so thats why.
(this phone is not rooted)
What i do : the first i tried to fix this phone is download any firmware that i see in sammobile on g928c then my phone turn to blue screen and a message "an error has occurred while updating the device software use the emergency recovery function in the smart switch pc software", Then i tried the smart switch i press MORE>EMERGENCY SOFTWARE RECOVERY AND INSTALLATION>DEVICE INITIALIZATION> i entered model name and my s/n number then > ok > set up my phone in to download mode then click okay and wait to finish the installation then after that my phone back to samsung logo boot loop now i tried to install the main firmware i see in smartswitch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i downloaded it in sammobile and used it in odin but the results is the same bootloop on samsung logo and i tried odin v3.09, odin3_v3.10.6, odin3_v3.10.7 and the latest 12.3 its just the same issue (note: i tried samsung kies too but its just the same on smartswitch)
Main Problem :
- Stuck on samsung logo / Boot loop on samsung logo
- can't enter to recovery mode
- FRP LOCK : On
any solution for this?

Read https://forum.xda-developers.com/showpost.php?p=71478246&postcount=3

dinamo1975 said:
Read https://forum.xda-developers.com/showpost.php?p=71478246&postcount=3
Click to expand...
Click to collapse
is it required the custom rom for me? its on the steps on the thread you gave

chibisan14 said:
is it required the custom rom for me? its on the steps on the thread you gave
Click to expand...
Click to collapse
If you have already installed the TRWP Recovery, yes you can install the custom ROM! Otherwise, you must flash the original / stock firmware.

dinamo1975 said:
If you have already installed the TRWP Recovery, yes you can install the custom ROM! Otherwise, you must flash the original / stock firmware.
Click to expand...
Click to collapse
i tried but the odin error, cant enter to settings to change the frp lock only download mode i can access
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

chibisan14 said:
i tried but the odin error, cant enter to settings to change the frp lock only download mode i can access
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
thx to @forumber2
You must follow this procedure:
1. Download this program LINK
2. Extract it to a new folder and open it
3. Enter the parameters like attached picture (1) and wait to download the firmware
4. Extract the firmware (use winrar/winzip/ 7zip) in a new folder and you will have 4 files like attached picture (2)
5. Open Odin and put these 4 file accordingly in Odin (BL to BL, AP to AP, CP to CP, CSC to CSC) like attached picture (3) and flash them (press START).

is there any other link you provided to download that 2088 MB because its always interrupted and make me download it again from the start using samfirm

chibisan14 said:
is there any other link you provided to download that 2088 MB because its always interrupted and make me download it again from the start using samfirm
Click to expand...
Click to collapse
SamFirm program himself make the download!

dinamo1975 said:
If you have already installed the TRWP Recovery, yes you can install the custom ROM! Otherwise, you must flash the original / stock firmware.
Click to expand...
Click to collapse
dinamo1975 said:
thx to @forumber2
You must follow this procedure:
1. Download this program LINK
2. Extract it to a new folder and open it
3. Enter the parameters like attached picture (1) and wait to download the firmware
4. Extract the firmware (use winrar/winzip/ 7zip) in a new folder and you will have 4 files like attached picture (2)
5. Open Odin and put these 4 file accordingly in Odin (BL to BL, AP to AP, CP to CP, CSC to CSC) like attached picture (3) and flash them (press START).
Click to expand...
Click to collapse
dinamo1975 said:
SamFirm program inself make the download!
Click to expand...
Click to collapse
Checking CRC32...
Error: CRC does not match. Please redownload the file.
thats why i redownload it again and start to 1% but thanks trying to download it again

Checking CRC32...
Error: CRC does not match. Please redownload the file.
downloading again for the 4th time

chibisan14 said:
Checking CRC32...
Error: CRC does not match. Please redownload the file.
downloading again for the 4th time
Click to expand...
Click to collapse
Download from HERE

dinamo1975 said:
Download from HERE
Click to expand...
Click to collapse
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> userdata.img
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
i passed the odin but still the same issue stuck on samsung logo boot loop

chibisan14 said:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> userdata.img
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
i passed the odin but still the same issue stuck on samsung logo boot loop
Click to expand...
Click to collapse
After you done this procedure, extract hidden.img from CSC file, rename it to hidden.img.tar, enter in Downloading Mode and flash it in AP on Odin.
After reboot, wait cca 10 - 15min!

<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
done and still not working

any solution for this?

Manual enter to recovery and perform wipe data.
Reboot and wait few minutes afterwards

punktnet said:
Manual enter to recovery and perform wipe data.
Reboot and wait few minutes afterwards
Click to expand...
Click to collapse
can't enter to recovery (vol up + home + power) only download mode and samsung logo bootloop only i can access

chibisan14 said:
done and still not working
Click to expand...
Click to collapse
After you flash "hidden.img.tar" Odin says "PASS" and your phone reboot?
Note that, hidden.img.tar must be rename it by changing the file extension! Is not just an "usual rename" !
Try again the whole procedure.
Otherwise, read this: https://forum.xda-developers.com/s6-edge-plus/help/samsung-galaxy-s6-edge-sm-g928c-twrp-t3192532

dinamo1975 said:
After you flash "hidden.img.tar" Odin says "PASS" and your phone reboot?
Note that, hidden.img.tar must be rename it by changing the file extension! Is not just an "usual rename" !
Try again the whole procedure.
Otherwise, read this: https://forum.xda-developers.com/s6-edge-plus/help/samsung-galaxy-s6-edge-sm-g928c-twrp-t3192532
Click to expand...
Click to collapse
yes it's says pass and phone reboot then coming to boot loop again
yes i change the file extension using 7-zip to tar
tried the link you gaved but its fail got the same issue again "Custom Binary(RECOVERy) blocked by frp lock" in download mode i guess i cant flash twrp recovery anymore because of the frp is on.
is there a solution to off the recovery in download mode?

I think you should try reflash a new image with PIT file from the beginning. Mind you should use a new version with same bootloader as your previous one. Different bootloaders won't install.

Phone stuck and wont boot

Hi, I recently fixed my note edge by installing 4.4 kitkat. A few days later I realized it was really slow and so I plugged it in and tried to flash marshmallow stock. This didn't work and now my phone goes automatically to download mode and every time I try to re-flash it it either insta fails or says aboot fused 2 binary 1. Also, I think i got twrp installed because it passed on odin but if I try to boot recovery it Says "Could not do normal boot and ddi: mmc_read failed". Thanks for the help!

https://forum.xda-developers.com/note-4-tmobile/general/ddi-mmcread-failed-boot-error-fix-t3434335

Bordo_Bereli51 said:
https://forum.xda-developers.com/note-4-tmobile/general/ddi-mmcread-failed-boot-error-fix-t3434335
Click to expand...
Click to collapse
Thanks for the link but the files included in the guide are listed for the note 4 so how do I use that in note edge thanks for help

UPDATE
I have got phone into download/ odin mode but still need help as my flash fails in odin\
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!

Same thing...
Here's my odin log.
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008>
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
P.s I have the AT&T model.

UPDATE
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N915AUCS2DQD1_CL8932341_QB13132575_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N915AUCS2DQD1_CL8932341_QB13132575_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N915AUCS2DQD1_CL8932341_QB13132575_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N915AATT2DQD1_CL8932341_QB13132575_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img.ext4
<ID:0/008> FAIL! (Write)
<OSM> All threads completed. (succeed 0 / failed 1)
It failed half way through on the phone it says
"ODIN : flash write failure"

1) ODIN 3.09
2) Get N915A 5.0.1 Modem
3) Get N915A 6.0.1 Firmware Stock (the AP file)
4) Get N915A 6.0.1 Modem
1)Place phone in DOWNLOAD MODE (volume down + home + power button)
2) Open ODIN 3.09
3) Place file N915A 5.0.1 Modem in CP
4) Place file N915A 6.0.1 Firmware.tar in AP box
5) Once ODIN is finished flashing the files power off your phone and go back into DOWNLOAD MODE, dont boot.
6) Place file N915A 6.0.1 Modem in CP box
7) Once the file is flashed your phone will be mmc error free and you will have a 100% working phone again.

thejug786 said:
Hi, I recently fixed my note edge by installing 4.4 kitkat. A few days later I realized it was really slow and so I plugged it in and tried to flash marshmallow stock. This didn't work and now my phone goes automatically to download mode and every time I try to re-flash it it either insta fails or says aboot fused 2 binary 1. Also, I think i got twrp installed because it passed on odin but if I try to boot recovery it Says "Could not do normal boot and ddi: mmc_read failed". Thanks for the help!
Click to expand...
Click to collapse
Tell me, how could you return to 4.4.4? I also have n915a on marshmallow, but I would like to return to kitkate. Tell me how you did it ??

"A few days later I realized it was really slow" tells us maybe that this is a emmc failure problem
https://www.sammobile.com/forum/showthread.php?t=30686
In this forum, this guy has the same problem like you. He tried different attempts. Even though he flashed succesfully and booted up, his phone was very slow and had freezing problem. A while later he got again the "Could not do normal boot and ddi: mmc_read failed" problem.