I got a Samsung Galaxy Tab (GT-P5110) of which the tablet did not startup anymore, and know nothing about the prehistory.
I downloaded stock firmware from samsung site: http://samsung-updates.com/device/?id=GT-P5110
and downloaded the latest EUR version named : P5110XXDMI1_P5110OXXDMJ1_HOME.tar.md5
With Odin 3.07 I installed that image in download mode with default options left on. After that I got the following screen message on the tablet:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Probably something went wrong. Then I downloaded Kies from samsung site, installed it with all extra drivers and I got the problem that Kies never recognized the tablet. Reinstalled many times, tried different options, but the problem persisted (took me 8 hours totally). Battery of the tablet was fully loaded and before this problem I saw that it was loading correctly.
Then I read this excellent document : http://forum.xda-developers.com/showthread.php?t=1652398
Tried again with Odin 3.07 and 1.85 and could install the image with only the reboot option on in Odin, flashed successfully the image, but still the problem:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I do not have much options left to look for. I was thinking about:
- driver issue
- wrong image
- wrong method
Can somebody help me to have this problem fixed ? I am willing to reinstall Windows 7 on this laptop.
Really nobody knows ?
never had problems here on Windows 8.
Maybe try flashing using Heimdall
But will I need a Heimdall image for that, because it does not accept the samsung image.
proconsoles said:
But will I need a Heimdall image for that, because it does not accept the samsung image.
Click to expand...
Click to collapse
But will I need a Heimdall image for that, because it does not accept the samsung image.
But when I use Odin 3.07 it looks like everything went fine:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5110XXDMI1_P5110OXXDMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> MLO
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But when I disconnect the usb cable after that, and hold the power button for a couple of seconds I still see:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
What could be the cause of this ?
proconsoles said:
But will I need a Heimdall image for that, because it does not accept the samsung image.
But when I use Odin 3.07 it looks like everything went fine:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5110XXDMI1_P5110OXXDMJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> MLO
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But when I disconnect the usb cable after that, and hold the power button for a couple of seconds I still see:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
What could be the cause of this ?
Click to expand...
Click to collapse
I am located in The Netherlands, and downloaded the specific image for the Netherlands, region PHN, used Odin 3.07 to install it, but still the same problem.
What can I do, wait for somebody who can give me a hint ? This is the first time I do a recovery of a Samsung tablet, and don't know how to continue with it.
Your help will be very much appreciated.
Maybe not the ideal situation, but try installing a custom recovery and a custom rom
If this works, it's no hardware problem.
You can use this guide to install a custom recovery
Joery360 said:
Maybe not the ideal situation, but try installing a custom recovery and a custom rom
If this works, it's no hardware problem.
You can use this guide to install a custom recovery
Click to expand...
Click to collapse
I got still the same problem, did exactly this procedure : http://forum.xda-developers.com/showpost.php?p=50174804&postcount=3
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.4.7_Swipe-Edition.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
Even reinstalled the drivers, but the problem remains the same, still keeping the message:
Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again.
proconsoles said:
I got still the same problem, did exactly this procedure : http://forum.xda-developers.com/showpost.php?p=50174804&postcount=3
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.4.7_Swipe-Edition.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
Even reinstalled the drivers, but the problem remains the same, still keeping the message:
Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again.
Click to expand...
Click to collapse
Do you think that this problem is hardware related ??
Nobody knows ?
Same for me
I'm dealing with almost the same issue, except for my ODIN flashes it doesn't even succeed. I know this happened to it after I tried to use heimdall to update my CWM, but I have had no success getting anything to work. I've been without a tablet for like a week now, doing everything I can think of or find a walk through for. I mean for me, I wouldn't mind going back to stock as long as it works again. Here's what my ODIN is doing:
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm about to try the TWRP someone recommended above, I'll let you know how it goes
---------- Post added at 08:25 PM ---------- Previous post was at 08:20 PM ----------
I tried flashing a different version of TWRP and it looked like it was going to do something, but it isn't going. Here's what it did this time:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_TWRP_2.7.0.1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Forgot to mention that I'm using Odin 3.09 on a p5113. Not that it makes huge difference.
Two things to try:
If you can boot into recovery, try the factory reset.
If not, have you tried Kies recovery mode?
The problem is that I can only boot into the special download mode, if I could get into recovery I think I could figure it out. I have tried the kies recovery, but it won't even read the device.
Maybe because Samsung / KIES Process running in background on your PC?
A Case of bad partitions
Deucethehero said:
The problem is that I can only boot into the special download mode, if I could get into recovery I think I could figure it out. I have tried the kies recovery, but it won't even read the device.
Click to expand...
Click to collapse
Try flashing with .pit file, partitioning set to on. Should correct partition problems. Somebody might have installed a non-android OS that botched. Look for a .pit file around the forum, you should find one. Good luck.
Thank you
Thanks for the tip, I'll give it a shot and post back with results!
Sorry for the late reply
Hey guys, I could have sworn that I posted back on Friday, but it's not here. Anyway, it's been a crazy few days for me traveling and school starting and all that.
About the tablet, I downloaded a pit file and it looked like it was going to work, but unfortunately it did not. I'm working on getting the tablet charged and set up to try again because I got a zip that had 2 pit files, so I'll try the other one soon. I'll post the results when I get them, thanks again for all the help!
Still not working, but I think some progress
Sorry to take so long responding, it's been a busy week.
So I just attempted to flash the .pit again, and it failed. Here's what Odin gave:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
It says, "There is no PIT," but that's what I'm trying to flash, right? I'm a little confused, but I hope someone knows what that means.
Thanks for all the help guys!
New info!
So today I was messing around with the .pit file that I had, and I used an editor to make it exactly the same as one I found in another forum. After Odin told me that it failed, I went to reset the tablet, and it showed me the Galaxy Tab 2 screen, which it has not done for a few weeks now. Then I plugged it in and it shows the battery charging symbol. Currently it is a 18%, so I'm going to let it charge and then try booting it up again and see what I get. Hopefully all is well now, but we shall see here in a few hours.
I also was not aware that I needed to flash the system along with the pit, and once I had that going it made a little more sense to me.
I'm going to try to post that pit here if anyone wants it. Hopefully it will help someone else in the future.
Odin Flashed, but failed
So I got into normal old download mode on the device using that .pit file. Yay! However upon attempting to flash the stock os back on Odin gave me this:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5113UEBLH3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm going to look into other avenues, but this did set me back to the "Firmware upgrade encountered an issue... blah blah"
Idk whats going on I used the odin3 download stock firmware to try to restore the phone after boot loop I tried to install TWRP custom recovery it didnt reboot into and so i tried to restore through odin3 and stock frimware and it says failed. Any ideas thanks
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
make sure re-partition is unchecked from the options tab.
Sent from my SM-G920I using Tapatalk
Try :
1. Using a different USB cable or USB port.
2. Redownload again your ROM as download errors can cause flash failures.
3. Lastly, consider bringing your S6 back to Samsung for warranty repair. Its free within your warranty period.
I hope this helps.
hi, i tried to install offcial firmware on my galaxy s6, but odin shows this message:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOCV_G920FH3G1AOC1_G920FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
plz help if you know what to do to fix it
dED
Ceca
up
up
Hello,
what version of android do you actually have and what do you want to have? For example you cant downgrade 5.1.1 to 5.0.2. What do you have ticked in odin?
Thanks..
i have stock 6.0.1 but its rooted, i want to get back to official firmware and just noticed that i downloaded 5.1.1. i have ticked auto reboot and f.reset time
Try another usb cable and another usb port. Sounds stupid but ODIN is known for failing for stupid crap like that. Also might want to try another version of ODIN and try another computer as a last resort.
Hi all!
I recently got a used S6 from the UK and it was lagging and crashing all the time. So I decided to install the original ROM again. Got it from Sammobile and Odin failed:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> cm.bin
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Now I'm starting to think that it's maybe not from the UK but I guess it's to late to use the codes to get my CSC or even region/operator information, since I have the light blue notification about using Smart Switch on the PC to restore the device. The Smart Switch tells me that S6 is not supported Kies 3 does the same. I decided to simply get another FW from sammobile but the problem comes to as to which one to download since I have no notification about the phone.
Any ideas? To answer before; I cannot go into download mode or anything like that.
I have majorly screwed up. I rooted my Samsung Galaxy s6 without any problems, it worked out fine. Today I wanted to go back to stock so I could upgrade to 6.0.1....Now I am screwed.
I unrooted my phone through the SuperSU app, which probably wasn't the best idea. It rebooted but stuck at the Samsung Galaxy S6 screen and wouldn't proceed.
I then went online to SamMobile and found the stock firmware for my phone. Halfway through, Odin crashed, wirst off with some sort of Write Error...I left it for 10 minutes or so, nothing else happened.
I rebooted my phone, it kept going into that same screen and wouldn't let me proceed.
I tried flashing again, now I have an error saying "No PIT partition detected"
Rebooted my phone once more, I now have a screen says "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software"
I tried again, that the info below is my latest result in which it states that some NAND Write operation has failed....
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU3BOJ7_G920W8OYA3BOJ7_G920W8VLU3BOJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!