Yo maybe someone can help me
I bought a Android Head unit widths Canbus
I installed everything and it goes on everything fine
But after around 10 Minutes of Driving the Head Unit just turns Off
I removed the Canbus and now it just in Standby Mode 24/7 so that isn’t the solution cause it’s draining the Battery
What could be the issue?
I am Driving a Volkswagen Golf Mk5 from 2006
Is it MTCD post Android system information including MCU version
Related
Hey, i have a wondefoo PX-5 Android Headunit 8.0, everything was working great but someday suddendly the WIFI didn't turn on (when turning the car on).
Since then, every now and then the WIFI won't turn on after the car was shut down, the problem is solved only if I restart the HeadUnit several times until the WIFI will come on.
I tried searching online but didn't find a problem as close to mine.. The WIFI does work but as I said only if I restart the HeadUnit.
When it's not working i just try to "flick" the switch from the OFF to ON position and it automatically returns to OFF (won't stay on the ON position for even a second).
Looking forward for your help,
Thanks, in advanced.
Same problem
I have a Dicola android 8.0 PX5 4GB/32GB head unit for my Audi A3.
I have the same problem as you discribe. The seller advised me to update the device but that had no effect.
I saw on Google more problems with those PX5 units. I seems to be the Wifi/BT module what causses the defect. Especially the low tempeture could cuase the defect. Not sure if this is the case but you are not the only one.
Hi All,
I need to find some info for the Can adapter so i can fix my issue and help other people with similar problems too .Owner of an MTCD PX5 unit, specific for Mercedes ML (W164) that came with the Can adapter.
From day one the steer wheel buttons worked (vol up/down, phone) and reverse camera out of the box BUT i had no vehicle info at all (door opened, fuel level, temperature, parking sensors etc) as many of the users especially on VW units have. The car is a 2010 model therefore the canbus info should be plenty. Tried all the combinations of CanBus under the extra settings with no luck.
One think i noticed is that i had NO Vehicle.apk or microntek apk and MTCCanbus.apk installed on the unit. I tried to install but installation was failing for both. Even copying to system/app/** didn't worked.
Any idea ?
BTW Anyone knows what is the Knob Mode under extra settings ? Mine is set to : 2 10k/20K ADC Ports
Details:
Unit: MTCD PX5
MCU: MTCE_GS_V3.00_3
ROM: Halk9 Mod 3.1 (Android 8)
Can Adapter : GS 10280514 / HW:V2 SW:V3
Can adapter Setting: 23 Benz_B200(simple)
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
zollaki said:
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
Click to expand...
Click to collapse
Good to know that this is a generic issue and not specific to my unit and car. It seems a lot of people with Mercedes cars have similar problems. I wonder if this is related with the cheap implementation of the Chinese Can adapters or related with the car.
Will keep searching
Another thread is open with more technical details for similar issue, more HW oriented though here > https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development
I have the same car w164 and px5 android 8
The same problem.
No I have more problems the canbas stop working no reverse camera no Wheel key vol working and no led light on unit key, I think my canbus dead ?
Hi, quick question.. is there anybody out there who can enable this option on his Android HU? Who has working DRL on Peugeot 407?
tnx..
Hi, I have the same problem, in the night, lights automatically turn on, but during day I must always manually turn on daylight lights
Maverickky said:
Hi, I have the same problem, in the night, lights automatically turn on, but during day I must always manually turn on daylight lights
Click to expand...
Click to collapse
I'm working with DRL problem all 2 months of this android multimedia.
I'm turned on DRL in PP2000 and it works with original peugeot radio. Multimedia turns it off.
I guess this is Canbus problem and it seems that today it is still not solved.
MGoris said:
I'm working with DRL problem all 2 months of this android multimedia.
I'm turned on DRL in PP2000 and it works with original peugeot radio. Multimedia turns it off.
I guess this is Canbus problem and it seems that today it is still not solved.
Click to expand...
Click to collapse
No solution yet?
gratnak said:
No solution yet?
Click to expand...
Click to collapse
Is it an MTCD/E unit.
The ptoblem is in canbus decoder see thes:
[PX3] Peugeot 407 - Factory parking sensors - steering wheel buttons
Hello All, From few days I'm owner of PX3 device for my Peugeot 407. I've go two issues which I'cant solve. I'm using original ROM Factory parking sensor It doesn't work with delivered CAN Bus (BAGOO PSA-BG-02 SW: V002) In product...
forum.xda-developers.com
Post:#148
plamenangelov said:
The ptoblem is in canbus decoder see thes:
[PX3] Peugeot 407 - Factory parking sensors - steering wheel buttons
Hello All, From few days I'm owner of PX3 device for my Peugeot 407. I've go two issues which I'cant solve. I'm using original ROM Factory parking sensor It doesn't work with delivered CAN Bus (BAGOO PSA-BG-02 SW: V002) In product...
forum.xda-developers.com
Post:#148
Click to expand...
Click to collapse
Hi,
is there a verified CANBUS that works well with 407?
I have following one:
PA-SS-07 20191229 SW:V1.00.012BYPS P/N:1814600028
used with PX5 9.0 4+64
rk3368-userdebug 9 PI 20200103.122402 test-keys Kernel 4.4.167 #193 Fri Dec 13 17:27:06 CST 2019 MCU version MTCE_MX_V3.41_1 Nov 15 2019 12:50:10 Octa-core Cortex-A53 @ 1.5G memory 3940 MB
I don't have parking sensors, so no issue there, the problems I observed are:
- no DRL (lights stopped switching on automatically, options in the Android app don't have any result)
- temperature not shown, I see no options to activate that in radio
- HU doesn't turn on on ignition ON every time, sometimes it's needed to start the engine first
- climate temperatures seem to be wrong - in the original controls it defaulted to 21 deg when turning on ignition (Webasto parking heater resets it), on the Android device it shows 23 deg, I don't know if 23 is equivalent to 21.
vorek22 said:
Hi,
is there a verified CANBUS that works well with 407?
I have following one:
PA-SS-07 20191229 SW:V1.00.012BYPS P/N:1814600028
used with PX5 9.0 4+64
rk3368-userdebug 9 PI 20200103.122402 test-keys Kernel 4.4.167 #193 Fri Dec 13 17:27:06 CST 2019 MCU version MTCE_MX_V3.41_1 Nov 15 2019 12:50:10 Octa-core Cortex-A53 @ 1.5G memory 3940 MB
I don't have parking sensors, so no issue there, the problems I observed are:
- no DRL (lights stopped switching on automatically, options in the Android app don't have any result)
- temperature not shown, I see no options to activate that in radio
- HU doesn't turn on on ignition ON every time, sometimes it's needed to start the engine first
- climate temperatures seem to be wrong - in the original controls it defaulted to 21 deg when turning on ignition (Webasto parking heater resets it), on the Android device it shows 23 deg, I don't know if 23 is equivalent to 21.
Click to expand...
Click to collapse
Hello, see this
[PX3] Peugeot 407 - Factory parking sensors - steering wheel buttons
Hello All, From few days I'm owner of PX3 device for my Peugeot 407. I've go two issues which I'cant solve. I'm using original ROM Factory parking sensor It doesn't work with delivered CAN Bus (BAGOO PSA-BG-02 SW: V002) In product...
forum.xda-developers.com
Hello I have a Joying JY-UQS03N4G-B Head Unit with Android 10.0
Joying Android 10.0 HD 7 inch Single din Car Radio 4GB/64GB Head Unit with DSP
SKU: JY-UQS03N4G-BShip From: Chinese/EU WarehouseOS: Android 10.0CPU: Octa Core 1.8GHz. 64-bit high-performance processorRam:LPDDR4 4GB Storage: Samsung 64GB1). Use Android Auto and Carplay voice commands to make phone calls, control navigation, listen to music and access messages.2). 16 band...
www.joyingauto.eu
If my Ignition is on after that I and starting my Engine my Head Unit goes for a short moment into sleep mode. With my old Head Unit the solution was: User Settings -> Delay Power Off When Acc Off > 5s
With this delay time my old head unit stayed on.
With my new Joying the value is not getting saved.
Does someone know how to fix that by myself?
Update agreement software
I have this issue as well. Do you mean update to latest firmware ?
I have a JY-VQD10N4G-DA in a 2019 VW T6 and use the latest FW. The value doesn't get saved either once the radio talks to Canbus - but even on the next day or so it comes back on within a second or so and showing the last screen. So I don't have to fiddle with that setting, in particular since the max 5min that can be set would be way less than what I get now. I thought that maybe the setting becomes redundant / ignored once Canbus is available.
i spoke to Joying and they said as i don't have canbus then it won't work. Sometimes it reboots straight away and other it starts from fresh for me, either way not a major issue
I found a solution. I bought an cable with an voltage stabilizer on the ignition power wire
It's a solution for cars with start stopp automatic but it also helps with my problem
RAK ISO Spannungsstabilisator Start / Stopp: Amazon.de: Elektronik & Foto
RAK ISO Spannungsstabilisator Start / Stopp: Amazon.de: Elektronik & Foto
www.amazon.de
For my purposes this is enough. I read that some cars/radios need a better stabilizer that also stabilizes the permanent power wire. This one:
Phonocar 5146 Spannungs-Stabilisator 12V ISO für Fahrzeuge Start-Stopp-System 8020065051467 | eBay
Entdecken Sie Phonocar 5146 Spannungs-Stabilisator 12V ISO für Fahrzeuge Start-Stopp-System in der großen Auswahl bei eBay. Kostenlose Lieferung für viele Artikel!
www.ebay.de
If I start my engine from ignition state now my radio stays on and If I turn off my engine my radio will stay on for 15-20 s until it turns off.
Hello from France,
I meet the following problem. Randomly it goes out while I'm driving my vehicle and I have to stop to switch off the ignition and then restart ?
Off course is when I use my GPS (Waze) and it's boring.
MCU : MTCE_HA_V3.71_1
Build : rk3399-userdebug 10
I hope your help and I would like to know if this problem is frequent.
BR
Jean-Claude
For the volkswagen concern up to 2009, this error is caused by the old gateway, it must be replayed. If you have a canbus decoder connected, it may be faulty, try to test the radio without it, preferably on a source on the table. Overheating can also occur, measure the temperature of the processor under load, if it gets too hot, replace the paste on the cooling plate, or add a passive or active cooler. Disassemble the device and check the connections and seating of the processor board. Or try updating the MCU and firmware. There may be more, you have a long way to go.