Hello I have a Joying JY-UQS03N4G-B Head Unit with Android 10.0
Joying Android 10.0 HD 7 inch Single din Car Radio 4GB/64GB Head Unit with DSP
SKU: JY-UQS03N4G-BShip From: Chinese/EU WarehouseOS: Android 10.0CPU: Octa Core 1.8GHz. 64-bit high-performance processorRam:LPDDR4 4GB Storage: Samsung 64GB1). Use Android Auto and Carplay voice commands to make phone calls, control navigation, listen to music and access messages.2). 16 band...
www.joyingauto.eu
If my Ignition is on after that I and starting my Engine my Head Unit goes for a short moment into sleep mode. With my old Head Unit the solution was: User Settings -> Delay Power Off When Acc Off > 5s
With this delay time my old head unit stayed on.
With my new Joying the value is not getting saved.
Does someone know how to fix that by myself?
Update agreement software
I have this issue as well. Do you mean update to latest firmware ?
I have a JY-VQD10N4G-DA in a 2019 VW T6 and use the latest FW. The value doesn't get saved either once the radio talks to Canbus - but even on the next day or so it comes back on within a second or so and showing the last screen. So I don't have to fiddle with that setting, in particular since the max 5min that can be set would be way less than what I get now. I thought that maybe the setting becomes redundant / ignored once Canbus is available.
i spoke to Joying and they said as i don't have canbus then it won't work. Sometimes it reboots straight away and other it starts from fresh for me, either way not a major issue
I found a solution. I bought an cable with an voltage stabilizer on the ignition power wire
It's a solution for cars with start stopp automatic but it also helps with my problem
RAK ISO Spannungsstabilisator Start / Stopp: Amazon.de: Elektronik & Foto
RAK ISO Spannungsstabilisator Start / Stopp: Amazon.de: Elektronik & Foto
www.amazon.de
For my purposes this is enough. I read that some cars/radios need a better stabilizer that also stabilizes the permanent power wire. This one:
Phonocar 5146 Spannungs-Stabilisator 12V ISO für Fahrzeuge Start-Stopp-System 8020065051467 | eBay
Entdecken Sie Phonocar 5146 Spannungs-Stabilisator 12V ISO für Fahrzeuge Start-Stopp-System in der großen Auswahl bei eBay. Kostenlose Lieferung für viele Artikel!
www.ebay.de
If I start my engine from ignition state now my radio stays on and If I turn off my engine my radio will stay on for 15-20 s until it turns off.
Related
I just bought a new January 2019 Head Unit from Sygav China Took 8 days to arrive by USPS
This Unit for any Toyota Rav4 2013-2017
Manufacturer: Hot-Audio / Dasaita
Sold in US by: SYGAV via eBay
Sold in China by: Dasaita via Aliexpress
Pure Android 8.0 Oreo Operation System
- CPU Processor: Rockchip PX5 Octa-Core ,64-Bit Coretex A53
- RAM Space: SAMSUNG DDR3, 4GB
- Memory: 32GB
I have 4 questions.
The Factory Backup Camera on this Rav4 Hybrid 2017 is 1080p,
The firmware from this PX5 Unit only allows to display 420p for backing up display and not the true 1080p
The firmware from this unit as strange AM Radio increments and doesnt allow to show 1130AM
The firmware doesnt allow to install newly Google Playstore apps like Netflix
I was able to install Netflix older version 4.16 which i hate because on the New current Netflix Version, it allow you to download movies and tv shows to play and watch later when there is no wifi.
Is there a newer Firmware for this so its fixes the backup camera headunit software resolution
Is there a better radio software for the unit that has the am frequency fix so i can listen to the news and traffic radio report
Is there a Firmware that addresses and fixed Am radio frequency that allows people to manually input the channel by digits or find 1130am
Is there a Firmware that allows me to install the current new Netflix APK?
Is there a Firmware that allows me to set the display brightness to a higher brightness?
besides that above issues, This is really a huge upgrade from the Toyota factory HDradio that is a piece of **** and useless Entune.
This stereo sounds just as great as a Kenwood and Alpine new stereo, Sound is a Huge improvement and bettter bass.
Love the android features including able to set it the way i like and has a better GPS Map than Toyota **** hole Nav Maps.
I dont have any lag or pause issues, responds quickly with my apps APK
any help from the community here would be greatly helpful, its runs on the PX5 platform
love to know how to get 1130am, the FM and Am radio scan is terrible as it just passes all the high signal stations and cant seem to get 1130am , the slider is useless as it skips channels frequencies also .
Mal in Vancouver Canada
here is the unit i bought from Ebay, if anyone bought the same one and has the fix . the Ebay item is 202266435549
Hi All,
I need to find some info for the Can adapter so i can fix my issue and help other people with similar problems too .Owner of an MTCD PX5 unit, specific for Mercedes ML (W164) that came with the Can adapter.
From day one the steer wheel buttons worked (vol up/down, phone) and reverse camera out of the box BUT i had no vehicle info at all (door opened, fuel level, temperature, parking sensors etc) as many of the users especially on VW units have. The car is a 2010 model therefore the canbus info should be plenty. Tried all the combinations of CanBus under the extra settings with no luck.
One think i noticed is that i had NO Vehicle.apk or microntek apk and MTCCanbus.apk installed on the unit. I tried to install but installation was failing for both. Even copying to system/app/** didn't worked.
Any idea ?
BTW Anyone knows what is the Knob Mode under extra settings ? Mine is set to : 2 10k/20K ADC Ports
Details:
Unit: MTCD PX5
MCU: MTCE_GS_V3.00_3
ROM: Halk9 Mod 3.1 (Android 8)
Can Adapter : GS 10280514 / HW:V2 SW:V3
Can adapter Setting: 23 Benz_B200(simple)
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
zollaki said:
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
Click to expand...
Click to collapse
Good to know that this is a generic issue and not specific to my unit and car. It seems a lot of people with Mercedes cars have similar problems. I wonder if this is related with the cheap implementation of the Chinese Can adapters or related with the car.
Will keep searching
Another thread is open with more technical details for similar issue, more HW oriented though here > https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development
I have the same car w164 and px5 android 8
The same problem.
No I have more problems the canbas stop working no reverse camera no Wheel key vol working and no led light on unit key, I think my canbus dead ?
Hello, all good people, professionals, beginners. I am Slovak for the introduction and therefore your language is not my natural so I apologize in advance. What i can't write, translate in google.
I have audi a3 12.2009 sportback gen2. My original radio 8P0035186P.
Air condition 8P0820043BH
Central electrics 8P0907279N
Gateway 1K0907951
Parking assitance 8P0919475B
Steering assistance 1K0909144C
Dashboard 8P0920931T
I buy android head unit px5 1024x600 rk3368 A10 octa core cortex-a53 2gb ram 32gb rom. (mtce_chs_v3.67_1 Nov 7 2020) (core 4.19.111+ Nov 23 2020) Canbus decoder CHS 20201201 A3/A4/TT HW:v3 SW:v1.
What works: steering wheel control, day / night mode change via sensor, battery/alt voltage - that is all. Used CANBUS protocol audi A3 simple 1/2 gen in factory settings.
I have the following problems and questions: The car does not communicate with the radio at all. Radio does not display vehicle management, applications or something for any communication between the vehicle and the unit. When I change the canbus protocol to golf7 or high class audi in factory settings, will be displayed after restart - vehicleapp and controlsettingsapp. When I run the application in canbus golf, turns on but everything is unavailable. As a layman i tried to pull the app from canbus golf7 to my audi a3 simple canbus and install. The application will install, but stop immediately. What I'm doing wrong or where I should look for a mistake according to you? Why I don't have these applications there at canbus a3 simple?
I called Audi support and I asked them supports my vehicle these things: Parking radar/assistant, open doors, air conditioning, tpms and more.. They said yes but only if you have rns-e radio. Rns-e dont have bluetooth and other good staff so i buy this and I am unhappy. I use obdeleven when I turn on a function, for example parking ilustration the function will disappear from my dashboard and for me logically sends the sensor control to the radio. But no and why? it's radio too waste or audi just can't do it? I will answer every question by attaching any file ask anything.
Hi everyone
I have a facelift 2010 Lexus IS250 F Sport, I've had some large success installing this XTRONS head unit for it and I am largely satisfied with it. I am however having an issue with getting Steering Wheel Controls to work with the head unit.
Lexus | Various | Android 10 | Octa Core | 4GB RAM & 64GB ROM | Integrated 4G Solution | PMA10ISLS
XTRONS PMA10ISLS is a 10.1" large screen car stereo with customized face panel and optimized CANbus Decoding for Lexus. It supports CarAutoPlay, built-in DSP, PIP mode enabled ,Dual Theme, Instant Rear Vision and so on.
xtrons.co.uk
Lexus| Various | ISO Wiring Harness | MOST
This ISO Wiring Harness is compatible with XTRONS custom fit units PSP10ISL,PMA10ISL etc. If your car is Lexus IS250/IS300/IS350 Convertible (2-door)with original navigation or fibre amplfier system,you need this cable to aid for the installation.
xtrons.co.uk
This is the unit I purchased, alongside a special wiring harness so that I could use it with my vehicle as its a facelift Navi.
With the default CANbus setting on my head unit, only Volume control seems to work and the phone call buttons and voice command buttons are mapped to functions like Radio and Hey Google but I cannot programme these on the app. With an alternative CANbus setting I get skip track functionality but I get different AC Controls and lose access to my factory amp settings.
The original wiring harness I got for the headhunt has not been used at all as I was instructed to usr the special harness, and that original harness had a CANBUS decoder. XTRONS claim that I am unable to programme the SWC due to the CANBUS needing to decode it, although I have played around with the settings and selected various different CANBUS settings.
Would anyone be able to advise me on how I can get the SWC working, would it involve plugging the CANbus decoder into the head unit? There is a 12 pin connection spare at the back but I am unsure if that would make the difference or not.
Yo maybe someone can help me
I bought a Android Head unit widths Canbus
I installed everything and it goes on everything fine
But after around 10 Minutes of Driving the Head Unit just turns Off
I removed the Canbus and now it just in Standby Mode 24/7 so that isn’t the solution cause it’s draining the Battery
What could be the issue?
I am Driving a Volkswagen Golf Mk5 from 2006
Is it MTCD post Android system information including MCU version