Windows 10/11 explorer hangs can't import photos - General Questions and Answers

Hello everyone, I've noticed that when I connect my galaxy s8 to my PC with the OEM original cable to my windows 10 and windows 11 desktop pc, the entire computer slows down and lags. Windows 10/11 explorer hangs and loads files/folders very slowly. Sometimes USB connection looses power and connection and no pictures show inside the android folder. When I disconnect the USB cable, then everything starts to function normally and windows 10/11 explorer speeds up and displays error messages that didn't either didn't show up before or were extremely slow to load. This leads to me assume there is something going on with android 9.0 and windows 10/11. Does anyone have suggestions or things we can try ? How can I resolve this ?
Thanks!!

thats not normal computer behavior. what are your computer specifications ? maybe that windows 10/11 is too much for it

Fytdyh said:
thats not normal computer behavior. what are your computer specifications ? maybe that windows 10/11 is too much for it
Click to expand...
Click to collapse
I know its not normal and I've been trying to find a way to see a log or something of what the entire process is contributing to so much lag/overhang. I am currently using Dell optiplex 9020 small form factor with:
cpu Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz
gpu Intel(R) HD Graphics 4600
motherboard 0xcr8d
RAM 16 gb
Windows 11 Pro 21H2
OS build 22000.918
Experience Windows Feature Experience Pack 1000.22000.918.0
BIOS Dell A25
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[email protected] said:
I know its not normal and I've been trying to find a way to see a log or something of what the entire process is contributing to so much lag/overhang. I am currently using Dell optiplex 9020 small form factor with:
cpu Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz
gpu Intel(R) HD Graphics 4600
motherboard 0xcr8d
RAM 16 gb
Windows 11 Pro 21H2
OS build 22000.918
Experience Windows Feature Experience Pack 1000.22000.918.0
BIOS Dell A25
View attachment 5706041
Click to expand...
Click to collapse
Maybe it's because windows 11 is still new. Missing drivers, not stable enough. On windows 10 I did not encounter such problems. See if there are updates pending. Or reinstall the drivers for your phone.

Fytdyh said:
Maybe it's because windows 11 is still new. Missing drivers, not stable enough. On windows 10 I did not encounter such problems. See if there are updates pending. Or reinstall the drivers for your phone.
Click to expand...
Click to collapse
I have also tested it out on windows 10 enterprise with all updates installed, even everything from the microsoft store. Same problem

IMO ist's an USB problem.

xXx yYy said:
IMO ist's an USB problem.
Click to expand...
Click to collapse
But I've tried with 2 cables - one that is OEM and another that is a generic brand called Nupower that my cellphone service provider gave me when my original boxed USB cable that came inside the s8 box got worn out. Both of these cables have the same problem. After a while it seems like either the phone or the USB can't transmit or sustain stable connection after an hour or so

The tansfer speed isn't related to USB-cable used but to USB-version the USB-port supports.
BTW;
Windows Explorer doesn't transfer files between devices.
The main function of Windows Explorer is to provide a graphic interface to navigate the Windows computer's hard drive and display the contents of the sub folders and folders used to organize files on the hard disk. It also allows users to copy, move, delete, rename and generally perform tasks relating to those folders and files

xXx yYy said:
The tansfer speed isn't related to USB-cable used but to USB-version the USB-port supports.
BTW;
Windows Explorer doesn't transfer files between devices.
The main function of Windows Explorer is to provide a graphic interface to navigate the Windows computer's hard drive and display the contents of the sub folders and folders used to organize files on the hard disk. It also allows users to copy, move, delete, rename and generally perform tasks relating to those folders and files
Click to expand...
Click to collapse
so you are saying that its the USB port (either USB 2.0 and USB 3.0 SS on the back of the computer) that's incompatible with the OEM USB cable from samsung experience store?

Related

Windows doesn't find my S710?

Hey guys,
I'm having a little (big) problem with my HTC S710 (Windows Mobile 6.1).
I used to put MP3's, CABs and AVI's on my mobile through a USB-cable. Whenever I put a USB-cable in my phone everything worked right away, and an 'Removable Device' was found on my PC.
However, now when I put the cable in my phone (and PC) nothing happens (the phone starts to charge, but my PC acts like nothing happens, it doesn't even say 'New Hardware has been found').
I'm running Windows 7 (people reported Windows Mobile Device Center having issues with Windows 7, but it used to work on Windows 7 so that's not the problem).
Things I tried:
2 different cables
Reinstalling Windows Mobile Device Center
Updating Windows Mobile Device Center (to latest version, 6.1)
Unticking 'Enable advanced Network functionality' in Settings
Manually run ActiveSync on my mobile (and PC)
Restarting the PC (doh)
Restarting the phone (doh)
Looking in my phone-settings, couldn't find anything strange
Booting in safe-mode
My laptop doesn't have Bluetooth so that's not an option.
I tried all kind of things from the internet, but just nothing seems to work. It's not a problem with my USB, because whenever I put my digital camera in my laptop everything works just fine (with the same cable).
I hope someone can help me here...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It looks like you were using WM5torage, didn't you? And now it is disabled. Because standardly your device is not shown as removable drive. I should be wrong, because I don't know, how W7 are working.
Try to pair your device via WMDC and you will see, if it will work.
Can you give me instructions on how to do that?
Thanks in advance
Sorry, I can't, because I don't have W7.
But I have Windows Mobile Device Center for Windows Vista installed so it should be the same
Then it might be same as in Vista. You have to connect your device with USB cable and everything should be done automatically. If not, you might try this two things:
1) Open WMDC and click on connection settings (I am not sure in this english translation, because I have czech one). Check, if USB cable is allowed. If yes, go to step 2
2) You might try disabling advanced USB functionality via settings->connections->more->usb to pc and uncheck box on your device (not computer)
Now, your device and computer should pair with no problem and you can browse your device with no problems.
I can't help you with WM5torage, because I am not using it.
Thanks for your help, but:
@1: The checkbox was already ticked
@2: As stated in my first post, I already tried that (without any luck )
Thats all weird. Just one thing. When you start ActiveSync on your device and open connections. Do you have checkbox ticked and USB selected?
And second thing. You wrote, that you have W7. Did you have your device paired on that same configuration and W7 build and just lost your connection? Or you had your device paired on oldest build of W7 or Vista?
torrentonly said:
Thats all weird. Just one thing. When you start ActiveSync on your device and open connections. Do you have checkbox ticked and USB selected?
And second thing. You wrote, that you have W7. Did you have your device paired on that same configuration and W7 build and just lost your connection? Or you had your device paired on oldest build of W7 or Vista?
Click to expand...
Click to collapse
The checkbox is ticked, yes.
It was paired on previous build of Windows 7, but I already removed those synchronisation profiles on my S710, so it's now paired with 0 computers..
So in your device, there is no paired computer and in computer is no paired device?
Exactly
That is really weird. Maybe some W7 bug? WMDC bug? I have no ideas how to solve that...
I have no idea too, someone else?
PS Thanks for your help
Here how i solved it...
I had the same problem until i did a new search for driver on a unknown device in the device manager. My problem was that the driver that windows 7 tried to install didnt work but after a new search it found a better one and after that it worked perfectly! Good luck!

[PC][Windows] Android Free Universal PC Suites

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- PREQUEL -
Click to expand...
Click to collapse
Mobile device management has historically been a business concern. Companies all over the globe require levels of control which determine what an employee can and cannot do on their smartphone. With smartphones acting like mini computers, desktop software is also demanded by personal users. We present you a range of free device management software, each enabling varying levels of control over your Android smartphone. ​
- ELABORATION -
Click to expand...
Click to collapse
- SNAP PEA PC Suite -
Click to expand...
Click to collapse
FEATURES
Download and install apps on Android device from the PC
Manage media files
Backup and restore information on the phone
Write text messages using PC keyboard
Connect to the phone via WiFi
DOWNLOAD SNAP PEA PC SUITE
- 91 PC Suite -
Click to expand...
Click to collapse
FEATURES
Import/Export contacts
Back up call logs/SMS
Download wallpapers, ringtones, themes and software
Convenient and practical RSS subscription
Log off and Reboot
Good UI performance
Phone process and system registry management
Software installation, uninstallation and management
Calendar and schedule management
Caller location inquiry
DOWNLOAD 91 PC SUITE
- ANDROID SYNC MANAGER PC Suite -
Click to expand...
Click to collapse
​
DOWNLOAD ANDROID SYNC MANAGER PC SUITE
- MOBILedit PC Suite -
Click to expand...
Click to collapse
FEATURES
DOWNLOAD MOBILEDIT PC SUITE
- MOBOROBO PC Suite -
Click to expand...
Click to collapse
FEATURES
DOWNLOAD MOBOROBO PC SUITE
- MOBO GENIE PC Suite -
Click to expand...
Click to collapse
FEATURES
​
DOWNLOAD MOBO GENIE PC SUITE
- CONCLUSION -
Click to expand...
Click to collapse
Android PC Suites are very important tools if you wants to better operate your Android Smartphones and Tablets with your PC.
Without Android PC Suite, after connecting your Android Device to PC, you will only able to transfer data in your Device’s internal memory or the Storage card available inside the device.
But generally, we wants to do other more important things like Managing contacts, messages, upgrading bulk software, backup phone’s content, installing apps from PC, connecting to internet from Android devices etc.
For this, you need to install Android PC Suite on your computer that can help you in doing all these above mentioned tasks along with many other useful tasks.
MY SUBJECTIVE OPINION IS THE BEST ANDROID UNIVERSAL PC SUITE IS
- MOBOROBO PC SUITE -
ENJOY !!!​​
If You Need Help With USB Drivers For Your Android Check In My Signature 2 Threads With Android PC Drivers.
ghetto_thug said:
If You Need Help With USB Drivers For Your Android Check In My Signature 2 Threads With Android PC Drivers.
Click to expand...
Click to collapse
Thank you, wick suite do you reccomend?
MoboRobo - It's Written In Conclusion Of OP.
First Page Updated:
Added - Mobo Genie PC Suite - Recommended -
please help me
hi Friends idont know this place is a right place for my Cuastion or not
i have problem and i think here i can found my answer
i use many PC Suites all of them had same problem for me
when i connect many android devices in PC Suites
PC Suites sign out them and i cant use it for Multitype android device ( i cant instal program to many device in same time )
i want have pc suite like itunes when i connect many divice dont sign out them
i think i must found god pc suit or goood pc mother boards with different control chipset or power full control chipset for usb ports
becuse i connect same device and theme have same driver when i conect them to my usb ports pc suite sign out my devices
i want buy new pc healp me for choice good motherboard
some times when i flash samsung or sony or ....... smart phone i cant flash them i read in google use different usb port
becuase it i think i most buy good pc and good mother board
at the end forgive me for bad writing and thanks for read it
Android PC suite
That mobo genie is not working these days. ?

Cannot Unlock Phone - Cannot Update USB Driver - Resolved

I've read other posts, applied some of the suggestions, but have not been able to solve this issue. I have the current Mi Flash, I have added my account to Developer options, enabled USB debugging. added Mi account to Mi Unlock status, and oem unlock, I have turned off wifi and am using cell data. My Mi account is OK, Sim accepted. I hear the Windows notification when I plug in the phone. I don't see the phone in Explorer when I'm in bootloader. I do when the phone is not in bootloader. I have logged into Mi Account with my phone # and email address - same error either way.
Issue, I start Mi Flash and after signing in, this message briefly appears on the screen, "Checking if your Mi Account has permissions". This message disappears and then Mi Flash goes to the next screen. I follow the instructions to the letter and finally plug my phone (several times) in (it is bootloader). The Unlock button on the bottom stays grey.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I wait and wait and it doesn't change. I open settings, I click the button to install the drive - I get an error:
At this point I'm stuck. I'm not sure its a driver error - the phone connects to my laptop OK and I have been able to transfer files. MTP is set default to "Transfer Files" vs charging.
As an update, I found the Poco in Device Manager, Portable devices with the following driver:
I'm guessing that this might not be the correct driver, but am not sure.
I would appreciate help with this problem. I hate the bloat Miui serves up and would like to move on to a ROM that it simple and safe. Thanks
I can't unlock too
I'm still trying to figure this out and need help. I connect to the phone through USB OK. I can access it via file explorer as a drive labelled Poco X3 NFC. I can add files via explorer and search through the phone. However, I installed Mi Suite to check drivers and with the phone connected Mi Suite pops a screen that says connect to device to usb. It already is, but I unplug and plug back in anyways, same error then it changes to this:
So its odd that it connects to the PC but does not seem to connect to the internet or Mi Suite. Is there a better USB driver to use for this. I found a Qualcom driver V1 and an adb driver R-13 Windows.
Well you have the needed Windows driver than.
Check Windows app/system error messages for clues. You may be missing a MS library or such.
blackhawk said:
Well you have the needed Windows driver than.
Check Windows app/system error messages for clues. You may be missing a MS library or such.
Click to expand...
Click to collapse
Thanks for your response. Can you be more specific? Where would I find these messages.
jjcdennis said:
Thanks for your response. Can you be more specific? Where would I find these messages.
Click to expand...
Click to collapse
I'm on W7x64. Goggle it. It you use Windows you should have discovered this important system app within you first year.
Example:
Side by side errors used to be common; missing x64 MS library (you need 2, one for 32 bit and one for x64). Sometime the apk developer fails to included in their app software; they don't need as it was needed to code the app. To run the app and get full functionality on a 64 bit system you need both libraries; a simple download from MS.
Perhaps they are now included in the 64 bit OS's unlike the XPx64 days however it's also possible the file got corrupted or deleted if so.
This is the kind of critical information MS Event Viewer can show you. It records App/System/Security events with a time stamp.
OK, this is solved. This time I went through the unlock process on my wife's Win 10 laptop. Drivers loaded, windows setup the Poco. Same thing, greyed out unlock button. I clicked on the button to install the driver and this time the driver install completed, versus the error I posted above. The screen popped back to the Unlock screen, with the Unlock button live. I clicked on one confirmation screen after the other until I got the confirmation to wait 143 hours to unlock. Glad this frustrating event is over. Hope it works at 143 hours too. Of note, I did turn off wifi and used data to unlock. I read somewhere to do do that. No idea if it made a difference.
Yay! Windows can get funny about loading drivers sometimes. You just need to play with it a bit many times to resolve the issue.
Keep Event Viewer in mind though as it can show you errors that are slowing your system down, security issues and more.

[USB & FLASHING DRIVERS] ADB FASTBOOT AND Flashing Drivers (QDloader, MTK, SPD, Samsung and others) Collection!

A collection of ADB Fastboot and Chipset based like Qualcomm, Mediatek, Spreadtrum and others flashing drivers Collection!
Most of the drivers listed here are signed drivers so you may not need to disbale driver signature enforcement.
1. 15 Seconds ADB installer
Thanks to Snoop05 (Senior XDA member).
2. LG Mobile Driver v4.8.0
3. MTK_USB_All_v1.0.8
4. Nokia_USB_Driver_v1.4.0
5. QDLoader HS-USB Driver_32_64bit_Setup
6. SAMSUNG_USB_Driver_for_Mobile_Phones
7. Sony Xperia Drivers
8. SPD_Driver_R4.20.4201
- SPRD_NPI_USB_Driver_v1.4
9. Motorola_Mobile_Drivers_v6.4.0
- MotorolaDeviceManager_2.5.4
Credits: Various sources on the Internet.
Please tell me if I have missed something or request any drivers you required or how to install guide here in the post and I will help you out.
I have uploaded all the necessary or almost universal drivers that should support most of devices and vendors.
If no OEM and Google's driver fails try some universal... mine is one option...
Yet Another Universal ADB Driver Package
Yet Another Universal ADB Driver Package and adbupdater for Windows
I made this installer as a kind of "update" the old driver package I had made for Ainol and Actions before. While at it I added those two tools usually used, that is adb and fastboot. Based on batch scripts, so it's open source. Self Signed, not...
forum.xda-developers.com
Is anyone familiar with interfacing by usb with a mediatek mt9612 hisense 43a6h android 11 google tv?
chris1892006 said:
Is anyone familiar with interfacing by usb with a mediatek mt9612 hisense 43a6h android 11 google tv?
Click to expand...
Click to collapse
Well that's little tricky because I don't think we can connect USB through normal ways. You would need to open up TV and then find the VCC, GND, D+ and D- pins on the motherboard and then with your soldering skill you would have to solder a USB cable to it and then connect it your computer to see how it goes.
mvikrant97 said:
Well that's little tricky because I don't think we can connect USB through normal ways. You would need to open up TV and then find the VCC, GND, D+ and D- pins on the motherboard and then with your soldering skill you would have to solder a USB cable to it and then connect it your computer to see how it goes.
Click to expand...
Click to collapse
Is it on one side? Thx
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
chris1892006 said:
Is it on one side? Thx
View attachment 5852913
View attachment 5852915
Click to expand...
Click to collapse
I cannot see the picture clear when I zoom in.
Can you please upload this picture in high quality to somewhere else and share link here. Maybe like Google Drive.
@mvikrant97 this board is like mine but i dont have a good camera or tools to pull the mainboard. Hopefully this helps https://www.shopjimmy.com/hisense-43a65h-complete-led-tv-repair-parts-kit-see-note/
chris1892006 said:
@mvikrant97 this board is like mine but i dont have a good camera or tools to pull the mainboard. Hopefully this helps https://www.shopjimmy.com/hisense-43a65h-complete-led-tv-repair-parts-kit-see-note/
Click to expand...
Click to collapse
Thankyou for the image but I still couldn't find any such points on the main board or the daughter boards. You will have to figure it out yourselves.
You may refer to USB specifications for more information.
USB 2.0 Specification | USB-IF
www.usb.org
I'm in a facility right now that i cannot do these solding things so i guess i won't be able to do it unless i can hack the software or force the tv into USB interface debugging mode so I can first backup the rom but i don't think i can anyway because no one is telling me anything about the Mediatek MT9612 chip. I'd love to root this tv for many different reasons.
By the way do you know how to override the maximum resolution of my Google TV from 1920x1920 to 3840x2160 so i can watch 4k videos natively rather than downscaled garbage?
Thanks
chris1892006 said:
I'm in a facility right now that i cannot do these solding things so i guess i won't be able to do it unless i can hack the software or force the tv into USB interface debugging mode so I can first backup the rom but i don't think i can anyway because no one is telling me anything about the Mediatek MT9612 chip. I'd love to root this tv for many different reasons.
By the way do you know how to override the maximum resolution of my Google TV from 1920x1920 to 3840x2160 so i can watch 4k videos natively rather than downscaled garbage?
Thanks
Click to expand...
Click to collapse
I would really loved to help you but I never had a Google TV so I cannot help you. Please wait for someone else to answer.
Thankyou.
Those three connectors circled in red are HDMI connectors.
What are the two black connectors at the bottom?

Question [Resolved] How Does One Transfer Photos from Windows 10 to a P7P?

I can transfer from the P7P to my Windows 10 computer but cannot figure out how to do the reverse.
You can't just copy and paste when you have your phone connected to the PC?
Anyway, maybe try Nearby Share.
I tried dragging a JPG from my computer to the
but get this message: "
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Skuddle said:
I can transfer from the P7P to my Windows 10 computer but cannot figure out how to do the reverse.
Click to expand...
Click to collapse
Read this news : Nearby Share Beta for Windows Release
I use it and you can send and receive without problem
Sib64 said:
Read this news : Nearby Share Beta for Windows Release
I use it and you can send and receive without problem
Click to expand...
Click to collapse
How's the transfer speed? Last time I used it it was using bluetooth for the transfer and it barely broke 100kbps lol
Ripthulhu said:
How's the transfer speed? Last time I used it it was using bluetooth for the transfer and it barely broke 100kbps lol
Click to expand...
Click to collapse
Its insane quick
Ripthulhu said:
How's the transfer speed? Last time I used it it was using bluetooth for the transfer and it barely broke 100kbps lol
Click to expand...
Click to collapse
I admit I didn't look at the speed, but I regularly send files to my PC or vice versa from my PC to my P7P and it is almost instantaneous.
Really fast
I read the news report about Nearby Share Beta for Windows Release...
It's a beta release. I don't do betas. To me, a beta release is nothing but bugs and trouble, and being neither a cellphone nor a computer geek, I don't need the aggravation.
Also, I haven't started to figure out Blue Tooth.
It appears that I therefore won't be able to copy files to my P7P but...
somewhere along the line my P7P has a photo that I must have transferred from my PC, so I need to take a look at that.
Sounds like your cord or port isn't working correctly, try a different cord and/or port. This happened to me and I just plugged into a different port and never had a problem since.
I finally figgered out how to transfer files back and forth between my computer and the P7P. Then I wrote down the exact procedure so I won't forget.
And you're not going to share what worked, in case someone else has a similar problem?
Oops - forgot the procedure
I wanted to include images in this, but I haven't gotten that far with my P7P yet. So here is how I set my P7P up and how I transfer photos back and forth:
TRANSFERING FILES BETWEEN COMPUTER AND PIXEL 7
Configure the P7P:
Turn the phone and the computer on.
Using a 24-pin USB-C cable, connect the P7P to any USB-2 or USB-3 port on the computer. Be sure all 24 connector pins are present at each end of the cable. Not all USB-C cables have 24 wires. If the computer does not have a USB-C connector, use a USB-C to USB-2 adapter.
From the P7P Home screen, tap "Settings". A "Settings" menu should appear.
Tap "Connected devices". A "Connected devices" menu should appear.
Under "Other devices", tap "USB /file Transfer". If "USB - Charging this device" appears, you can tap that. A USB Preferences menu appears with "USB" centered on the next line.
NOTE: "USB File transfer" may appear instead of "USB - Charging this device". In that case, just tap "USB File transfer".
A "USB Preferences" menu should appear.
Under "USB controlled by" tap "This device". Under "Use USB for", tap "File transfer / Android Auto".
Now open Windows Explorer on the computer. You should see "Pixel 7" or "Pixel 7 Pro" and a cellphone icon along with the drive list. You can now transfer files using the following procedure.
Transfer the Files:
Start the computer, open Windows Explorer, connect the USB-C cable to the computer, and start the P7P. You should hear the usual "bloop-de-bloop" from the computer, and the P7P's Home screen should appear.
In Windows Explorer, double-click the blue "Pixel 7 Pro" icon. A menu should appear and you can now move/copy files back and forth.
I transfer between Windows Explorer and "Pixel 7 Pro\Internal shared storage\DCIM".
If you enable developer options you can set default usb to file transfer and skip a few steps.

Categories

Resources