I tried deleting some system app through my pc after successfully deleting the app I went to recovery mode to reboot the phone but got a message saying encryption error that I should reboot the phone, after rebooting I got still got the same message.
I downloaded the firmware through this link:https://firmwarefile.com/gionee-m7-power-t0065.
I followed some steps i found on a website using qfil from qpst to flash the phone but it loaded between seconds and wrote successfully but my phone was still the same tried it again, same thing but this time i can't switch on my phone or boot to recovery mode but when connected to a pc it shows Qualcomm hs USB diagnostics 900e. i updated to qualcoom hs usb qdloader 9008 but i keep getting download failed Sahara failed error trying to flash it using qfil.pls i need help.
am new to this forum
Related
after Install qualcomm drivers ver 1.1 and connecting Dead Yuphoria Via Usb Windows Stucks ..(tried xp,7,8,8.1,10)
No Port Detected In QFil Tool
PORT Gets Detected in Safe mode but says "cannot connect to comport"
SDCARD Dumb Doesn't Boot up download mode ... Helpp.....
after Install qualcomm drivers ver 1.1 and connecting Dead Yuphoria Via Usb Windows Stucks ..(tried xp,7,8,8.1,10)
No Port Detected In QFil Tool
PORT Gets Detected in Safe mode but says "cannot connect to comport"
SDCARD Dumb Doesn't Boot up download mode ... Helpp.....
I have done fastboot erase aboot before and restored Yuphoria by flashing stock firmware through QPST .
But Now i done a mistake of,
fastboot erase config
fastboot erase aboot
in one go , and tried to flash stock firmware through QPST. But while the device got detected as Qualcomm HSUSB QDLOADER 9008 , device manager continuously refreshes and pc gets hanged soo hardly that i have to unplug the power source to reboot the pc. Everytime i connect the device to pc in this mode, PC gets hanged the same way. QPST doesnt detect the port either (even though device manager shows QDLOADER and continuously refreshing with pc hang) .
I have tried the external sd card boot option, and that didnt give me fastboot mode access.
Is there any chance that i can restore the device before giving it in a service center ?
Hey there... I was trying to get my OnePlus 7 -That I just bought - to a rooted Android 10, updating was the easy part but while trying to "fastboot flash boot twrp.img" I think I somehow got myself stuck making the bootloader (aka fastboot mode ) as my main thing the phone load into and now when I turn on the phone it goes straight to fastboot mode I go and try to "fastboot flash boot twrp.img" it says OKAY twice but I can't load into recovery it takws me back to the fast boot again.... Idk what to do... Help
More into:
I got to the twrp before once during the process and idk why dumb me rebooted when I couldn't access my phone files from pc I wanted to put the image of OOS on a flash drive and via OTG but once I restarted by mistake after that whatever choice I make on the fastboot screen will quickly restart and get back to the same screen, so I can do "fastboot flash boot twrp.img" successfully but I can't load to it I hit reboot to recover or Start or Reboot Bootloader nothing takes me to twrp,
Also when I try "fastboot flash recovery twrp.img"
It says sending recovery okay, writing recovery failed, (remote: (recovery_b) no such partition)
I hope to get any help and I'm sorry if it's an obvious thing I couldn't notice, I'm not the sharpest between my brothers. Momma says. ? with me. I'll appreciate it I promise.
Have you tried this Fastboot ROMS?
Use this:
https://forum.xda-developers.com/oneplus-7/how-to/unbrick-tool-oneplus-7-msmtool-hydrogen-t3953240
After that just put offical Rom zip for your region on internal memory and after that install update. voila
Unbrick tool also available for OxygenOS pie https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325 :good:
Help
same issue with me...whenever i try to recover using fastboot method,it gives an error like product name is sdm845 and required is msmnile
and when i use the msm tool , it gives an error of sahara server....
any help is highly appreciated.
sourabhone said:
same issue with me...whenever i try to recover using fastboot method,it gives an error like product name is sdm845 and required is msmnile
and when i use the msm tool , it gives an error of sahara server....
any help is highly appreciated.
Click to expand...
Click to collapse
"sahara server" problem : disable driver signature / update drivers
https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
Qualcomm dr: https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/
you must to press power button at the same time you plug in usb cable.....keep trying and your computer will start installing drivers for Port 9008
(you can use Google Search for more Info about "sahara" problem)
First of all twrp.img is a recovery image. You would normally use fastboot flash recovery twrp.img.
Secondly, you aren't supposed to flash twrp.img but use fastboot boot twrp.img and then boot to twrp and flash the twrp installer. If you can boot into fastboot, type fastboot boot twrp.img(twrp.70 for android q) and then flash twrp installer and oos. And if you can't boot into recovery you will have to use the msm tool.
daitalos said:
"sahara server" problem : disable driver signature / update drivers
Qualcomm dr:
you must to press power button at the same time you plug in usb cable.....keep trying and your computer will start installing drivers for Port 9008
(you can use Google Search for more Info about "sahara" problem)
Click to expand...
Click to collapse
Thanks daitalos for the reply..
the drivers for 9008 are installed as visible in device manager...
the msm tool shows the phone as connected, when i start the process, it waits for loading firehose binary and waits there for 10 sec.....after that throws error of sahara communication failed (FH:258)
i again tried the volume up + power button combo but to no avail...
also there is no red led light on the phone while charging
sourabhone said:
Thanks daitalos for the reply..
the drivers for 9008 are installed as visible in device manager...
the msm tool shows the phone as connected, when i start the process, it waits for loading firehose binary and waits there for 10 sec.....after that throws error of sahara communication failed (FH:258)
i again tried the volume up + power button combo but to no avail...
also there is no red led light on the phone while charging
Click to expand...
Click to collapse
In device manager you can see "Qualcomm HS -USB QDLoader 9008 (com3 for example) ?
You tried another usb port (?)
in windows 10 it is better for the computer to have the "developer mode" enabled
Close any antivirus temporarily..
Run msm tool as Administrator ofcourse..
(I don't know but If you try with msm tool from here : https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
you should see the models it supports (GM1900, GM1901, GM1903, GM1905)
_I think the problem is on the computer and the communication with the device...
sry for english
Thanks
daitalos said:
In device manager you can see "Qualcomm HS -USB QDLoader 9008 (com3 for example) ?
You tried another usb port (?)
in windows 10 it is better for the computer to have the "developer mode" enabled
Close any antivirus temporarily..
Run msm tool as Administrator ofcourse..
(I don't know but If you try with msm tool from here : h t tp s: // forum . xda-developers . com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
you should see the models it supports (GM1900, GM1901, GM1903, GM1905)
_I think the problem is on the computer and the communication with the device...
sry for english
Click to expand...
Click to collapse
Thank you so much daitalos.
At last i was able to recover my phone from being a paperweight.Used my other laptop and it worked perfectly first time.Maybe my 1st laptop was having some issues.
Redmi note 5 boot loader locked stuck in mi logo boot loop
two things i want
1. how to recover data
2. how to start my phone
phone is starting in fastboot mode earlier it was opening in recovery mode from there i deleted data and tried to restart the phone but it didnot
Now its not starting in recovery mode its only starting in fastboot mode..
I have opened my set for edl mode also found points and qualcomm drivers also but mi flash not detecting my phone in edl mode but qualcom drivers are showing in device manager ....
amrittech said:
Redmi note 5 boot loader locked stuck in mi logo boot loop
two things i want
1. how to recover data
2. how to start my phone
phone is starting in fastboot mode earlier it was opening in recovery mode from there i deleted data and tried to restart the phone but it didnot
Now its not starting in recovery mode its only starting in fastboot mode..
I have opened my set for edl mode also found points and qualcomm drivers also but mi flash not detecting my phone in edl mode but qualcom drivers are showing in device manager ....
Click to expand...
Click to collapse
First go to fastboot mode and then connect your phone with original mi usb cable(must n should original cable reqired) please check your pc weather phone is detected or not.if not connected then check device manager in pc and check if there any warning signs found on your driver or not. And also check in mi flash.,there is an option to install driver/check drivers.please install that if you didn"t install.
brother my bootloader is locked so i think only option is edl what you think
chinmay ml said:
First go to fastboot mode and then connect your phone with original mi usb cable(must n should original cable reqired) please check your pc weather phone is detected or not.if not connected then check device manager in pc and check if there any warning signs found on your driver or not. And also check in mi flash.,there is an option to install driver/check drivers.please install that if you didn"t instal
Click to expand...
Click to collapse
Hi , yesterday I was flashing the MIUI official rom via the Spflash Tool and I unplugged it accidentally , after that I tried to reconnect it and it appear "Unknown USB Device (Descriptor Request Failed)" in the device manager. Is this fixable with software such as hydra , spflash tool or reinstalling the drivers? (Sorry for my bad English.)
phone is booting to OS or did you brick it?
yaro666 said:
phone is booting to OS or did you brick it?
Click to expand...
Click to collapse
I guess its bricked , I was flashing the miui 12 via the spflash tool but I unplugged the cable accidentally so now it became Unknown USB Device in the device management.
does it boot to fastboot?
yaro666 said:
does it boot to fastboot?
Click to expand...
Click to collapse
no , it even can't boot to the MediaTek mode (the mode which uses spflash tool).
then you bricked it. try edl or seqrch for someone with box
Okay so now the unknown usb device problem is fixed but theres a new problem. When I use the MediaTek EDL mode to flash the MIUI , it appeared a error "ext ram expectioned". It stucked at the "Download DA" process and after 60s the device disconnected from my pc and appeared that error.