Hello ,
My h950 running 5.1.1 PR rooted would not open apps , i restarted the phone and it got stuck at lg logo . i pressed both volume keys and power button but nothing happened . i then pressed volume down and power and the phone restarted to fastboot mode . it gets detected by "fastboot devices" but "fastboot reboot" does not work .
i pulled the battery cable , pressed power and it booted straight to fastboot mode .
press volume up and plug in pc cable , it boots to download mode . if i remove the cable , it goes to fastboot mode again
any ideas ? i would like to avoid a factory reset with kdz .
please help
Deleted
you'll have to ask for someone to backup up partitions or extract them from the KDZ and flash them directly through fastboot.
Lucky you you have FASTBOOT and not QHUSB_BULK alias Hard Brick alias QUALCOMM 9008
Alex_XV6700 said:
you'll have to ask for someone to backup up partitions or extract them from the KDZ and flash them directly through fastboot.
Lucky you you have FASTBOOT and not QHUSB_BULK alias Hard Brick alias QUALCOMM 9008
Click to expand...
Click to collapse
i found a similar problem on the G3 forums and extracted the laf and boot partitions from the 15aPR kdz . the problem is that fastboot cant send commands to my phone .
it cant even reboot it
Sir, I installed Twrp recovery and then my mobile phone got stuck in Fastboot after erasing the whole recovery, Aboot, boot and laf I rebooted the LG G2 Mobile and it doesn't show any thing then i used SRK 2.1 tool and bring it back to the fastboot mode but now it doesnot showed any phone in Device manager and it showed
[2127180] fastboot mode stared
any after pluging usb Cable it gives the message
[2127180] fastboot: processing commands
so what i can do to recover my mobile phone which doesn't go to download mode. any is not shown by computer.
Hey there... I was trying to get my OnePlus 7 -That I just bought - to a rooted Android 10, updating was the easy part but while trying to "fastboot flash boot twrp.img" I think I somehow got myself stuck making the bootloader (aka fastboot mode ) as my main thing the phone load into and now when I turn on the phone it goes straight to fastboot mode I go and try to "fastboot flash boot twrp.img" it says OKAY twice but I can't load into recovery it takws me back to the fast boot again.... Idk what to do... Help
More into:
I got to the twrp before once during the process and idk why dumb me rebooted when I couldn't access my phone files from pc I wanted to put the image of OOS on a flash drive and via OTG but once I restarted by mistake after that whatever choice I make on the fastboot screen will quickly restart and get back to the same screen, so I can do "fastboot flash boot twrp.img" successfully but I can't load to it I hit reboot to recover or Start or Reboot Bootloader nothing takes me to twrp,
Also when I try "fastboot flash recovery twrp.img"
It says sending recovery okay, writing recovery failed, (remote: (recovery_b) no such partition)
I hope to get any help and I'm sorry if it's an obvious thing I couldn't notice, I'm not the sharpest between my brothers. Momma says. ? with me. I'll appreciate it I promise.
Have you tried this Fastboot ROMS?
Use this:
https://forum.xda-developers.com/oneplus-7/how-to/unbrick-tool-oneplus-7-msmtool-hydrogen-t3953240
After that just put offical Rom zip for your region on internal memory and after that install update. voila
Unbrick tool also available for OxygenOS pie https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325 :good:
Help
same issue with me...whenever i try to recover using fastboot method,it gives an error like product name is sdm845 and required is msmnile
and when i use the msm tool , it gives an error of sahara server....
any help is highly appreciated.
sourabhone said:
same issue with me...whenever i try to recover using fastboot method,it gives an error like product name is sdm845 and required is msmnile
and when i use the msm tool , it gives an error of sahara server....
any help is highly appreciated.
Click to expand...
Click to collapse
"sahara server" problem : disable driver signature / update drivers
https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
Qualcomm dr: https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/
you must to press power button at the same time you plug in usb cable.....keep trying and your computer will start installing drivers for Port 9008
(you can use Google Search for more Info about "sahara" problem)
First of all twrp.img is a recovery image. You would normally use fastboot flash recovery twrp.img.
Secondly, you aren't supposed to flash twrp.img but use fastboot boot twrp.img and then boot to twrp and flash the twrp installer. If you can boot into fastboot, type fastboot boot twrp.img(twrp.70 for android q) and then flash twrp installer and oos. And if you can't boot into recovery you will have to use the msm tool.
daitalos said:
"sahara server" problem : disable driver signature / update drivers
Qualcomm dr:
you must to press power button at the same time you plug in usb cable.....keep trying and your computer will start installing drivers for Port 9008
(you can use Google Search for more Info about "sahara" problem)
Click to expand...
Click to collapse
Thanks daitalos for the reply..
the drivers for 9008 are installed as visible in device manager...
the msm tool shows the phone as connected, when i start the process, it waits for loading firehose binary and waits there for 10 sec.....after that throws error of sahara communication failed (FH:258)
i again tried the volume up + power button combo but to no avail...
also there is no red led light on the phone while charging
sourabhone said:
Thanks daitalos for the reply..
the drivers for 9008 are installed as visible in device manager...
the msm tool shows the phone as connected, when i start the process, it waits for loading firehose binary and waits there for 10 sec.....after that throws error of sahara communication failed (FH:258)
i again tried the volume up + power button combo but to no avail...
also there is no red led light on the phone while charging
Click to expand...
Click to collapse
In device manager you can see "Qualcomm HS -USB QDLoader 9008 (com3 for example) ?
You tried another usb port (?)
in windows 10 it is better for the computer to have the "developer mode" enabled
Close any antivirus temporarily..
Run msm tool as Administrator ofcourse..
(I don't know but If you try with msm tool from here : https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
you should see the models it supports (GM1900, GM1901, GM1903, GM1905)
_I think the problem is on the computer and the communication with the device...
sry for english
Thanks
daitalos said:
In device manager you can see "Qualcomm HS -USB QDLoader 9008 (com3 for example) ?
You tried another usb port (?)
in windows 10 it is better for the computer to have the "developer mode" enabled
Close any antivirus temporarily..
Run msm tool as Administrator ofcourse..
(I don't know but If you try with msm tool from here : h t tp s: // forum . xda-developers . com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
you should see the models it supports (GM1900, GM1901, GM1903, GM1905)
_I think the problem is on the computer and the communication with the device...
sry for english
Click to expand...
Click to collapse
Thank you so much daitalos.
At last i was able to recover my phone from being a paperweight.Used my other laptop and it worked perfectly first time.Maybe my 1st laptop was having some issues.
hi community
i hope someone is still active in this nubia x section, because i hope for some help.
i flashed twrp to my nubia x with using Minimal ADB and Fastboot.
with twrp i flashed the new rom 3.21.
as i tried also to flash gaps i got in the "your device is corrupt. it can't be trusted and will not boot g.com/abh" error.
but because i still was able to flash files with Minimal ADB and Fastboot i flashed all the *.img files i found in the NX616J-update.zip to the phone.
so i was able to boot the recovery mode and flashed the original rom 3.21 with otg from usb stick.
then the nubia x booted normal to the original rom, but because the playstore wasn't working, i flashed again twrp with Minimal ADB and Fastboot.
in twrp i used all swipe and format functions because i thinked i want clean what i can to start from the beginning.
sorry i dont remeber exactly all the steps i did.
and now my problem is the phone only boot to the fastboot menu.
Minimal ADB and Fastboot seems to still work normal, i can unlock the device and flash twrp.
but after reboot i am still in the fastboot menu.
only boot do edload don't boot to fastboot, and if i boot edload i can connect the phone to my pc and with the qfil-tool i see connect:
"Qualcomm HS-USB QDLoader 9008 (COM4)
But to use qfil to flash i think i need a "MetaBuild Configuration (contents.xml)", and i can't find this file for nubia x.
i hope someone has an idea how i get my phone out of this fastboot-loop and share it here.
thanks and kind regards
hoitschau
i found the solution, thanks to rcsj.
https://forum.xda-developers.com/nubia-x/help/install-rom-stock-3-18-gapps-support-t4108715
flashing the file vbmetaDISABLED.img from the google drive with fastboot was my rescue.
I tried deleting some system app through my pc after successfully deleting the app I went to recovery mode to reboot the phone but got a message saying encryption error that I should reboot the phone, after rebooting I got still got the same message.
I downloaded the firmware through this link:https://firmwarefile.com/gionee-m7-power-t0065.
I followed some steps i found on a website using qfil from qpst to flash the phone but it loaded between seconds and wrote successfully but my phone was still the same tried it again, same thing but this time i can't switch on my phone or boot to recovery mode but when connected to a pc it shows Qualcomm hs USB diagnostics 900e. i updated to qualcoom hs usb qdloader 9008 but i keep getting download failed Sahara failed error trying to flash it using qfil.pls i need help.
am new to this forum