After finally unlocking the bootloader, installed TWRP 3.6.0 and rotted with Magisk v23.0. Lets find a custom ROM that suits this phone - WRONG!
I have tried many types of ROM and so far it ends in soft brick. Need advise if you have any. My aim is to install a basic custom ROM , install pico or nano GAPP, and only install like 4 apps on it. phone, sms, navigation, music player etc.
I have tried the following ROM:
Phhusson-treble AOSP andriod version 9, 11 & 12.
GSI arm64 ab ROM
a so call stock ROM
I also tried installing the vendor.img as described here
I would like to use LineageOS but there doesn't seem to be one for this phone
I am now resorting to installing the stock firmware to make the phone work again, instruction here
If anyone has sucessfully rooted this phone using a basic ROM and GAPP please share how you did it and where your download was.
Why did phhuson fail ? That's the basic gsi, every other gsi are build on top of that. If that doesn't work, nothing will.
Fytdyh said:
Why did phhuson fail ? That's the basic gsi, every other gsi are build on top of that. If that doesn't work, nothing will.
Click to expand...
Click to collapse
I install - system-arm64 –ab
I did some research that the Doogee n20 is a arm64 and a+b .... Unless I got the wrong information.
I suspect there maybe some stock firmware files that needs to be installed as well to make it work properly.
A post said it needs vendor.img, I might try sourcing another copy.
Follow up - I got it un-bricked with the stock firmware (android 9) (link in my original post) .... Back to square one .
jackjack1885 said:
I install - system-arm64 –ab
I did some research that the Doogee n20 is a arm64 and a+b .... Unless I got the wrong information.
I suspect there maybe some stock firmware files that needs to be installed as well to make it work properly.
A post said it needs vendor.img, I might try sourcing another copy.
Follow up - I got it un-bricked with the stock firmware (android 9) (link in my original post) .... Back to square one .
Click to expand...
Click to collapse
Search treble info, it will tell you exactly any treble related information.
Fytdyh said:
Search treble info, it will tell you exactly any treble related information.
Click to expand...
Click to collapse
Many thanks, didn't do that step.
Did it now, it shows it needs system-arm64-ab
I got the right one. Not sure about the VNDK 28.0 doesn't really say on the webpage.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tried android 9 (the phones original version) 11, and 12..... No luck.
follow advices from this https://forum.xda-developers.com/t/doogee-n20-twrp.4136331/
and this https://forum.xda-developers.com/t/...loop-after-any-custom-rom-doogee-n20.4357313/
Hey man, did you get it fixed?
Actually this device is A-only, but you should use Gsis A/B.
Most Phh based Gsi works almost perfectly for me.
You can try this:
- Download and install Twrp 3.6.1 here
- Download LineageOS 18.1 (lir) here Choose "arm64 bvZ" version
- Download stock rom here or Y9Plus variant here
- Extract the Gsi, and the vendor image from the stock rom
- I restarted in Twrp, go to wipe and select system, data, cache...
- Go install and flash the Gsi as system image, and vendor as vendor image
-reboot
AtS17 said:
Hey man, did you get it fixed?
Actually this device is A-only, but you should use Gsis A/B.
Most Phh based Gsi works almost perfectly for me.
You can try this:
- Download and install Twrp 3.6.1 here
- Download LineageOS 18.1 (lir) here Choose "arm64 bvZ" version
- Download stock rom here or Y9Plus variant here
- Extract the Gsi, and the vendor image from the stock rom
- I restarted in Twrp, go to wipe and select system, data, cache...
- Go install and flash the Gsi as system image, and vendor as vendor image
-reboot
Click to expand...
Click to collapse
Thanks for the links!
Are you able to add this old firmware please? https://cloud.mail.ru/public/mCzU/5PX4cKPfH
I can't download it, i found it on 4pda (Mod Action: Link removed)
I'm trying to delete the red "TEE key not write" message.
Related
I'm not responsible for whatever damage this could possibly cause to your device.
If you appreciate the work i have done, Feel free to buy me a cup of coffee @paypal
Welcome to GSI For Galaxy M20 ONLY FOR M205F/M205G
Some information you should know..
Full TREBLE Documentation here : https://source.android.com/devices/architecture
Generic System Image (GSI) Documentation here : https://source.android.com/setup/build/gsi
Make sure you install TWRP : https://forum.xda-developers.com/galaxy-m20/development/recovery-twrp-3-2-3-galaxy-m20-t3906705
If any bugs you face, Report them to the appropriate Threads of the GSI you installed or github issues section, as those are not mine to fix i only provide Guide that allows GSIs to run on.
- VENDOR FEATURES:
Wi-Fi & Hotspot
Telephony & Ril (Mobile Data, Calls, SMS, MMS)
NFC
Camera
Bluetooth
GPS
All Sensors
- STEPS FOR INSTALLING GSIs:
Download the desired GSI (it MUST be A-only_arm64 Variant)
unpack it if it wasn't in .IMG format
Go to TWRP , Install , Install IMAGE
Pick your GSI and select SYSTEM IMAGE
Reboot to TWRP Recovery
Flash "GSI_Fix_boot.zip"
- STEPS FOR INSTALLING GAPPS
Download the appropriate OpenGapps.org
Go to TWRP , Install
Pick your OpenGapps.zip
Reboot to System
- FOR INSTALLING FIXES:
Camera Fix (Flash only on NON Working GSIs)
- KNOWN BUGS:
Fingerprint
Bluetooth calls are broken
No Network bars (Calls/data works)
May be more, Let me know
Downloads. F.A.Qs below
XDA:DevDB Information
Guide on How to flash GSI, ROM for the Samsung Galaxy M20
Contributors
prashantp01
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Testing
Current Stable Version: v1
Created 2019-03-05
Last Updated 2019-03-05
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Come hang with us on our chat : Telegram
----------------------------------------------------------------
Generic System Image (GSI) : Github
Treble folder : Gdrive
---------------------------------------------------------------
Bugs :
1- some users might face SDCard issues
If you did , back up its data and format it in GSI.
2- If you face "Error 70: Insufficient storage space available in the system partition" while flashing Gapps
If you get do this : Wipe > Advanced Wipe > select system > Repair or Change File System > Resize File System
Go back and flash Gapps
amazing.
Awesome Bro. Nic work. Keep it up.
VoLTE is not working
harsinghal said:
VoLTE is not working
Click to expand...
Click to collapse
It will not work on any gsi
It work with m205fn?
kofa01 said:
It work with m205fn?
Click to expand...
Click to collapse
yes, it should work
prashantp01 said:
yes, it should work
Click to expand...
Click to collapse
it doesn't work, in TWRP i pres flash img and chosse system.img GSI but TWRP failed with errot 255...
maybe i doing wrong?
kofa01 said:
it doesn't work, in TWRP i pres flash img and chosse system.img GSI but TWRP failed with errot 255...
maybe i doing wrong?
Click to expand...
Click to collapse
On which gsi?
prashantp01 said:
On which gsi?
Click to expand...
Click to collapse
This is a problem with ROM. I tried to put the Pixel Experience, it started without problems.
But not work NFC.
On which ROM the NFC will work?
kofa01 said:
This is a problem with ROM. I tried to put the Pixel Experience, it started without problems.
But not work NFC.
On which ROM the NFC will work?
Click to expand...
Click to collapse
report it to pixel experience developer, with proper logs
T
This work on sm-m205g ?
isnu harajuku said:
This work on sm-m205g ?
Click to expand...
Click to collapse
yes it should work
AOSP and treble both did not work in the m205f version. It gets stuck in blootloder
My phone is stuck in boot screen after flashing the rom, can someone help me fix this issue? I flashed Phh-Treble 9.0
My phone model No. M205F
lifehacker03 said:
AOSP and treble both did not work in the m205f version. It gets stuck in blootloder
Click to expand...
Click to collapse
your M20 is already a trebled device
rafsun.khan said:
My phone is stuck in boot screen after flashing the rom, can someone help me fix this issue? I flashed Phh-Treble 9.0
My phone model No. M205F
Click to expand...
Click to collapse
take logcats and report to phh-treble developer
prashantp01 said:
take logcats and report to phh-treble developer
Click to expand...
Click to collapse
Any guide to get a logcat when the device is stuck at the android boot logo? Nothing shows up when I "adb devices" from PC.
Thanks but its official update original for m20
I'm mean wait to comes out the originally Android 9...
Or not coming.
Or update This Help me
Did someone sucsessfully install gsi rom on m20 ?
I tryed a couple of roms, allways bootloop
Hello guys today i will show you how to download Bliss rom with android pie on Lenovo K9 (L30843)
Download TWRP first: https://mega.nz/#!tFcm1IYb!nN6H210DoyYqjL0WEnI-I9skClDPEO0gl82H5My-gq4
if you have not unlocked the bootloader: https://www.howtoapps.info/how-to-unlock-bootloader-lenovo-k9/
Bliss rom link: https://mega.nz/#!FMlyGaxS!jUYIAfcyZkIyN4UDeZ_-CDcEyrieGYCWs7q7bIwm7Tc
First step: Go to the TWRP.If you have internal storage (0mb),Go to wipe/advanced wipe/mark data/repair or change file system/change flie system/EXT4 and you're done
I recommend you save your rom to sd card not have thousands of quarrels
Second step: Go to micro sd card/install image/your recorded bliss rom/mark system image/slipe to confirm flash
Third step: gapps link: https://mega.nz/#!9dFkWY5I!JKX80Udn2ZmTgRuGiwgcdRLQXEBssowK7xUOvL2wW4E
Install zip/mark open_gapps-arm64-9.0....../swipe to confirm flash/reboot system now
the rom leaves without a logo,shows its original logo of Lenovo,And after a while the inscriptions orange state are removed,and rom starts and says that there is an internal problem, do not be afraid, do not create problems,wait until the screen is a little darker and press ok.
Mention below in the comments if there are bugs!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks for the guidance, but it shows dm-verify error after exit twrp. keeping ask me Volume up EIO mode: or Volume down: restart mode
Do not worry.
This happens to me too.
You just push the power up and you're done.
Appreciated your reply. But the press of volume up will go back to twrp. Btw, I guess the problem may be my previous OS is 8.1 not Pie you mentioned. I will try to flash to Pie before your solution. thanks!
nakaconsan said:
Appreciated your reply. But the press of volume up will go back to twrp. Btw, I guess the problem may be my previous OS is 8.1 not Pie you mentioned. I will try to flash to Pie before your solution. thanks!
Click to expand...
Click to collapse
restore your system with stock rom drop your phone and it will send you to original android recovery,and you'll fix the problem there.
And then again you download twrp and everything from the article.
The same thing happened to me.
nakaconsan said:
Appreciated your reply. But the press of volume up will go back to twrp. Btw, I guess the problem may be my previous OS is 8.1 not Pie you mentioned. I will try to flash to Pie before your solution. thanks!
Click to expand...
Click to collapse
https://translate.googleusercontent.../file&usg=ALkJrhhPKYKHeAfpo2xmD7CW9PcuAW8K8A#!
link to stock rom on lenovo K9
https://spflashtool.com/download/
download the latest version of sp flash tool
nakaconsan said:
Appreciated your reply. But the press of volume up will go back to twrp. Btw, I guess the problem may be my previous OS is 8.1 not Pie you mentioned. I will try to flash to Pie before your solution. thanks!
Click to expand...
Click to collapse
Open the sp flash tool.
On scatter-loading file you press choose.
Find the folder where it is saved firmware.
You are going to Frimware flolder and you choose MT6765_Android_scatter.
Turn off your phone completely.
Press download in sp flash tool.
Pressing the volume down button connects to the usb phone and the download starts.
call network / other gsi roms
Hi, I would like to ask if the call network is working on this rom and if I can use other GSI Roms such as erfanoabdi roms or Lineage OS etc. and if other files like permissiver_v2.zip or magisk need to be flashed to boot these roms. Thank you for your response.
(Can i must use custom boot.img or stock oreo boot.img ?)
Samuel Ladziansky said:
Hi, I would like to ask if the call network is working on this rom and if I can use other GSI Roms such as erfanoabdi roms or Lineage OS etc. and if other files like permissiver_v2.zip or magisk need to be flashed to boot these roms. Thank you for your response.
Click to expand...
Click to collapse
Yes, you can download other gsi roms. Choose arm64 a-only. If you want to download gsi rom with android 10, you need to flash Start_treble.zip
,,Start_treble.zip" link: https://mega.nz/file/dJcxiADQ#_iSoctWQ36K1JL3t9qGP0I_HwuHd43iC6e-0TbwZOKA
The Best Gamer said:
Yes, you can download other gsi roms. Choose arm64 a-only. If you want to download gsi rom with android 10, you need to flash Start_treble.zip
,,Start_treble.zip" link: https://mega.nz/file/dJcxiADQ#_iSoctWQ36K1JL3t9qGP0I_HwuHd43iC6e-0TbwZOKA
Click to expand...
Click to collapse
Thanks very much :good:
not booting
hello I have problem I flash gsi android 9 aosp and when I reboot on screen show orange state after 5seconds dm-verity error when I hit volume up phone reboots and nothing. idk whats wrong Iam doing
all works perfect
help
I need help I flash stockrom and I lost baseband I need frimware L38043_ROW_OPEN_USER_M6762_O_MTK_4G_S301_18 and i dont know where to download.:crying:
Iam repaired with this http://x1grand.blogspot.com/2017/07/permanent-imei-nvram-fix-for-mtk.html for somebody usesful
My try to dont make ROM for K9
Hello can I use this ROM https://forum.xda-developers.com/redmi-6/development/rom-bootleggersrom-4-3-xiaomi-redmi-6-t4011719 on K9 when I swap kernel in boot.img from stock ROM to this ROM? Because I try GSI ROMs and not boot any off them. :crying:
nothing happend
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CherishOS is an AOSP based rom focusing on Unique and Smooth UI with handy features. CherishOS is a reborn of pie based Dot-ExtendedOS.
DON'T FLASH!!! MOBILE DATA DOESN'T WORK! WORKING ON IT.
Disclaimer
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
"This is a user-friendly thread, all your suggestions are important to us and will be taken into consideration.."
Features
ROM Features: all Evolution X features + some more customizations
What's Working:
Spoiler: Show
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Face unlock
NFC
Lights
Sound / vibration
Known Issues
USB Tethering
VoLTE (won't be fixed unless LG releases its source code)
Downloads
Android File Host
Installation
1.Boot into FASTBOOT. If you can't, wipe laf_a and laf_b through QFIL.
2.fastboot boot <drag and drop ofox_universal.img over the cmd>
3.Format Data (Main Menu - Trash Can icon - Format Data - type "yes")
3 .Flash the rom using adb sideload
(Optional) 4. Flash ofox zip the same way through adb sideload,
(Optional) 5.flash Magisk (if you want to root your device as well)
DO NOT FLASH GAPPS， ALREADY INCLUDED!
Credits
CherishOS Website
CherishOS Source
Device tree, kernel and blobs by @EmanuelCN
Other Information
Android Version: 11
Kernel Version: Linux 4.x
Based on: AOSP
Last Updated: May 17, 2021
USE 30F FIRMWARE OR YOU WON'T ABLE TO HEAR SOUND IN CALLS
Hi,
Missignal_dev,
I have just installed your great rom on my, LMG710EM and it is,
AMMAZING
I have just spent the last week struggling to get my banking/loyalty cards (TESCOS Pay+ & Google Pay) also Samsung wearable app to function correctly using a different android 11 rom, I tried 15+ attempts, with different combinations, with/without magisk, clean/dirty install .
I then installed your ROM and it,
smashed it "YEH".
How i installed your rom below.
1. Using LG-UP: install, G710EM30f_00_OPEN_EU_OP_1124.kdz
2. Using Qfil: replace, Boot-A, Boot-B slots with, ofox_1.9_boot.img
3. Once in Ofox recovery install: Cherish-OS-v2.5-20210517-1626-judyln-UNOFFICIAL-GApps
4. From Ofox recovery, install: Magisk-v23.zip only (No .APK)
5. from Ofox recovery: using the dustbin icon, Format Data, by typing (YES) .
With installing, CherishOS Rom, my banking apps work great and my Samsung watch is working perfectly.
This Rom is a very smooth, the only missing things are,
Full Ofox recovery,
Mobile Data,
but as i use a PAYG sim, this is not a issue,
If you love your G7 as much as i do,
then you should embrace this great rom,
Many thanks,
Johnr64
johnr64 said:
Hi,
Missignal_dev,
I have just installed your great rom on my, LMG710EM and it is,
AMMAZING
I have just spent the last week struggling to get my banking/loyalty cards (TESCOS Pay+ & Google Pay) also Samsung wearable app to function correctly using a different android 11 rom, I tried 15+ attempts, with different combinations, with/without magisk, clean/dirty install .
I then installed your ROM and it,
smashed it "YEH".
How i installed your rom below.
1. Using LG-UP: install, G710EM30f_00_OPEN_EU_OP_1124.kdz
2. Using Qfil: replace, Boot-A, Boot-B slots with, ofox_1.9_boot.img
3. Once in Ofox recovery install: Cherish-OS-v2.5-20210517-1626-judyln-UNOFFICIAL-GApps
4. From Ofox recovery, install: Magisk-v23.zip only (No .APK)
5. from Ofox recovery: using the dustbin icon, Format Data, by typing (YES) .
With installing, CherishOS Rom, my banking apps work great and my Samsung watch is working perfectly.
This Rom is a very smooth, the only missing things are,
Full Ofox recovery,
Mobile Data,
but as i use a PAYG sim, this is not a issue,
If you love your G7 as much as i do,
then you should embrace this great rom,
Many thanks,
Johnr64
Click to expand...
Click to collapse
Is yours Dual-SIM model? Seems like Dual-SIM models will have one working SIM slot..
(NVM, I misread your message, thought you have Mobile Data working...)
Many thanks again for your great Rom,
my G7 is a Single sim version, originally locked to 02 UK,
model number: LMG710EMAEUABK,
with a Official LG unlocked Bootloader,
thanks again,
Johnr64
This ROM its AMMAZING.
Thanks to developer for the great work
Hi guys. I am new here. I have lg g7 software version g710ulm30d android 10. i don't know this is original or cross flashed. can someone please guide me how can i unlock bootloader or whatever to do install twrp and custom roms. Thanks.
kingkhan2843 said:
Hi guys. I am new here. I have lg g7 software version g710ulm30d android 10. i don't know this is original or cross flashed. can someone please guide me how can i unlock bootloader or whatever to do install twrp and custom roms. Thanks.
Click to expand...
Click to collapse
Here's a guide: https://forum.xda-developers.com/t/...y-g7-thinq-except-g710tm-with-photos.4168771/
Anyone using this rom?
CheckVizoR said:
Anyone using this rom?
Click to expand...
Click to collapse
This has been discontinued, although I've figured out how to fix the mobile data issue. If you are looking for a custom ROM, maybe you would like to try the AOSPK 12.
Missignal_Dev said:
This has been discontinued, although I've figured out how to fix the mobile data issue. If you are looking for a custom ROM, maybe you would like to try the AOSPK 12.
Click to expand...
Click to collapse
Thank you for answer.
Is there any link for try?
CheckVizoR said:
Thank you for answer.
Is there any link for try?
Click to expand...
Click to collapse
Emanuel's Hub for LG SDM845
Roms channel: https://t.me/LGG7V40Customs
t.me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Compatible with Lineage Modded 18.1 only!
Instructions
1. Download TWRP image
2. fastboot boot twrp-3.5.2_11.0-2-nio.img
3. Enter Passcode if you have to decrypt /sdcard
4. adb push twrp-3.5.2_11.0-2-nio.img /sdcard
5. Click Backup -> Only Select Boot and Swipe to Backup
6. Go back to Main Menu, -> Advanced -> Install Recovery Ramdisk
7. Find and Select twrp-3.5.2_11.0-2-nio.img -> Swipe to Install
8. Done! If any issues, restore the backup made before.
Downloads
https://build.lolinet.com/file/twrp/nio/twrp-3.5.2_11.0-2-nio.img
Donations
https://paypal.me/electimon
Contributors
@Electimon, betaxab
Version Information
SourceCode: https://github.com/ixmoe/android_device_motorola_nio_twrp/tree/twrp-11.0
Version Information
Status: Stable
Release Date: July-9-2021
Last Updated: July-9-2021
That's great! Waiting for the fixes and the TWRP Installer.
Nice work Dev ! I will test with Lineage Modded later today , thanks a lot .
Lineage modded is not distributed as an OTA package.
Everything working so far with LOS Modded on The G100 Model. Thanks dev !
Will there be a version compatible with stock ROM?
gewe said:
Will there be a version compatible with stock ROM?
Click to expand...
Click to collapse
When I figure out how todo it yes
Electimon said:
When I figure out how todo it yes
Click to expand...
Click to collapse
Is recovery somehow tied to the ROM? I thought recovery can be anything regardless of what the ROM is, as long as bootloader is unlocked.
Tried while stock rom was installed. Its fine when booted from fastboot. But if installed, touchscreen doesn't work.
Will try on lineage modded and see.
Edit: it works with a mouse. So touchscreen doesn't work, yet to try on lineage modded.
can't start adb sideload mode .
failed reason unkown.
lsusb shows no device presented while enter the sideload mode.
i flashed it directly, like this:
Code:
fastboot flash boot twrp-3.5.2_11.0-2-nio.img
is this ok ?
Hello,
What's going on with TWRP? twrp-3.5.2_11.0-3-nio.img just flashes and won't work and twrp-3.5.2_11.0-2-nio.img isn't booting on my G100 any ideas?
Thanks
Hello,
Finally was able to get this installed on my Moto G100 but it's essentially useless. I can't access the internal flash on the unit from Windows in MTP mode after formatting flash to wipe so I can install lineageOS and Gapps. Essentially have to get LOSrecovery installed and then do sideload because I can't do what I need to with this. The newer version just flashes the screen. Are we going to get one that actually works?
Thanks!
marcusah123 said:
Hello,
Finally was able to get this installed on my Moto G100 but it's essentially useless. I can't access the internal flash on the unit from Windows in MTP mode after formatting flash to wipe so I can install lineageOS and Gapps. Essentially have to get LOSrecovery installed and then do sideload because I can't do what I need to with this. The newer version just flashes the screen. Are we going to get one that actually works?
Thanks!
Click to expand...
Click to collapse
Yes I have a beta version that has that functionaility working already, just working on slot switching bugs.
Hello,
Awesome!!!! Cannot wait to give it a go. You're doing great work and I hope to use this along with LineageOS and have this as my new phone to use!! WOOOHOO!
Thanks and sorry if I came across as rude!
Additionally I can't sideload gapps as it says there isn't enough room... uhg these two slot phones essentially suck a lot... the DooGee S95 Pro I have is so much simpler!
ETA? Oh yea sorry don't ask for ETAs ever!
Oh I just hope it's soon so I can start using the phone. Do you need some bug spray?
Anyhow I'll use whatever version you have A/B switching aside because you can switch from A to B easily with fastboot, while you work out the last bugs.
Thanks and appreciate your work.
And then I ask for an update!
Any updates or development of this?
funciona para moto g 100?
Hi
When I try to flash GSI Android 13 it keeps doing an infinite boot loop, I tried looking at some tutorials and they show me that I should wipe System
But the system option is not available on my Samsung A125F/DS. Only system Image is available and doesn't allow wiping
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I found the image below on the internet to show you what I'm talking about
The screenshot below is what happens when I try to wipe System Image
Just don't wipe it.
Wipe data and install gsi
No need wipe system,
First go to factory reset in twrp and second
just wipe data, cache and dalvik/art cache only.
Then flash your GSI image, choose SYSTEM to flash your GSI...
NOTE:
FIRST: choose correct GSI image for your phone. If wrong gsi that flash in your phone, it can cause boot loop or always restart...
To check your compatible GSI. Download TREBLE CHECK on playstore..
SECOND: if your phone is android 12 version, downgrade your phone into android 11 version, because GSI is not compatible in samsung a12 A125F/DS android 12 version... There's a bug and boot loop on android 12... Android 11 is stable for GSI...
Download GSI in this site
Generic System Image (GSI) list - phhusson
Here are some frequently asked questions and answers about Generic System Image (GSI):
magiskzip.com
I wish, i solve your problem....
If your phone is looks like this photo... Your phone is compatible in ARM64 GSI or ARM64-ab gsi,
my phone is samsung a12 A125F/DS, i already try to flash all compatible gsi in my phone successfully...
guideness08 said:
No need wipe system,
First go to factory reset in twrp and second
just wipe data, cache and dalvik/art cache only.
Then flash your GSI image, choose SYSTEM to flash your GSI...
NOTE:
FIRST: choose correct GSI image for your phone. If wrong gsi that flash in your phone, it can cause boot loop or always restart...
To check your compatible GSI. Download TREBLE CHECK on playstore..
SECOND: if your phone is android 12 version, downgrade your phone into android 11 version, because GSI is not compatible in samsung a12 A125F/DS android 12 version... There's a bug and boot loop on android 12... Android 11 is stable for GSI...
Download GSI in this site
Generic System Image (GSI) list - phhusson
Here are some frequently asked questions and answers about Generic System Image (GSI):
magiskzip.com
I wish, i solve your problem....
If your phone is looks like this photo... Your phone is compatible in ARM64 GSI or ARM64-ab gsi,
my phone is samsung a12 A125F/DS, i already try to flash all compatible gsi in my phone successfully...
Click to expand...
Click to collapse
Can you downgrade back to android 11 if it has a different binary number
Allehandro said:
Can you downgrade back to android 11 if it has a different binary number
Click to expand...
Click to collapse
No
Allehandro said:
Can you downgrade back to android 11 if it has a different binary number
Click to expand...
Click to collapse
No... Just download firmware that same binary number and same CSC as yours phone...