I'm not responsible for whatever damage this could possibly cause to your device.
If you appreciate the work i have done, Feel free to buy me a cup of coffee @paypal
Welcome to GSI For Galaxy M20 ONLY FOR M205F/M205G
Some information you should know..
Full TREBLE Documentation here : https://source.android.com/devices/architecture
Generic System Image (GSI) Documentation here : https://source.android.com/setup/build/gsi
Make sure you install TWRP : https://forum.xda-developers.com/galaxy-m20/development/recovery-twrp-3-2-3-galaxy-m20-t3906705
If any bugs you face, Report them to the appropriate Threads of the GSI you installed or github issues section, as those are not mine to fix i only provide Guide that allows GSIs to run on.
- VENDOR FEATURES:
Wi-Fi & Hotspot
Telephony & Ril (Mobile Data, Calls, SMS, MMS)
NFC
Camera
Bluetooth
GPS
All Sensors
- STEPS FOR INSTALLING GSIs:
Download the desired GSI (it MUST be A-only_arm64 Variant)
unpack it if it wasn't in .IMG format
Go to TWRP , Install , Install IMAGE
Pick your GSI and select SYSTEM IMAGE
Reboot to TWRP Recovery
Flash "GSI_Fix_boot.zip"
- STEPS FOR INSTALLING GAPPS
Download the appropriate OpenGapps.org
Go to TWRP , Install
Pick your OpenGapps.zip
Reboot to System
- FOR INSTALLING FIXES:
Camera Fix (Flash only on NON Working GSIs)
- KNOWN BUGS:
Fingerprint
Bluetooth calls are broken
No Network bars (Calls/data works)
May be more, Let me know
Downloads. F.A.Qs below
XDA:DevDB Information
Guide on How to flash GSI, ROM for the Samsung Galaxy M20
Contributors
prashantp01
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Testing
Current Stable Version: v1
Created 2019-03-05
Last Updated 2019-03-05
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Come hang with us on our chat : Telegram
----------------------------------------------------------------
Generic System Image (GSI) : Github
Treble folder : Gdrive
---------------------------------------------------------------
Bugs :
1- some users might face SDCard issues
If you did , back up its data and format it in GSI.
2- If you face "Error 70: Insufficient storage space available in the system partition" while flashing Gapps
If you get do this : Wipe > Advanced Wipe > select system > Repair or Change File System > Resize File System
Go back and flash Gapps
amazing.
Awesome Bro. Nic work. Keep it up.
VoLTE is not working
harsinghal said:
VoLTE is not working
Click to expand...
Click to collapse
It will not work on any gsi
It work with m205fn?
kofa01 said:
It work with m205fn?
Click to expand...
Click to collapse
yes, it should work
prashantp01 said:
yes, it should work
Click to expand...
Click to collapse
it doesn't work, in TWRP i pres flash img and chosse system.img GSI but TWRP failed with errot 255...
maybe i doing wrong?
kofa01 said:
it doesn't work, in TWRP i pres flash img and chosse system.img GSI but TWRP failed with errot 255...
maybe i doing wrong?
Click to expand...
Click to collapse
On which gsi?
prashantp01 said:
On which gsi?
Click to expand...
Click to collapse
This is a problem with ROM. I tried to put the Pixel Experience, it started without problems.
But not work NFC.
On which ROM the NFC will work?
kofa01 said:
This is a problem with ROM. I tried to put the Pixel Experience, it started without problems.
But not work NFC.
On which ROM the NFC will work?
Click to expand...
Click to collapse
report it to pixel experience developer, with proper logs
T
This work on sm-m205g ?
isnu harajuku said:
This work on sm-m205g ?
Click to expand...
Click to collapse
yes it should work
AOSP and treble both did not work in the m205f version. It gets stuck in blootloder
My phone is stuck in boot screen after flashing the rom, can someone help me fix this issue? I flashed Phh-Treble 9.0
My phone model No. M205F
lifehacker03 said:
AOSP and treble both did not work in the m205f version. It gets stuck in blootloder
Click to expand...
Click to collapse
your M20 is already a trebled device
rafsun.khan said:
My phone is stuck in boot screen after flashing the rom, can someone help me fix this issue? I flashed Phh-Treble 9.0
My phone model No. M205F
Click to expand...
Click to collapse
take logcats and report to phh-treble developer
prashantp01 said:
take logcats and report to phh-treble developer
Click to expand...
Click to collapse
Any guide to get a logcat when the device is stuck at the android boot logo? Nothing shows up when I "adb devices" from PC.
Thanks but its official update original for m20
I'm mean wait to comes out the originally Android 9...
Or not coming.
Or update This Help me
Did someone sucsessfully install gsi rom on m20 ?
I tryed a couple of roms, allways bootloop
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is Project Treble?
Everything is explained here!
What's working:
Boots
Wifi
Bluetooth
Camera ( Videos And Photos )
Video Playback
Audio ( Record and Playback )
Sensors
GPS
RIL
VoLTE
What's not working:
Selinux is permissive
You tell me
Generic System Images:
Here
How to flash:
Use a TWRP with /vendor support
Wipe cache, dalvik-cache, system, vendor and data
Flash the required firmware
Flash the treble_lithium-xxxxxxxx-xxxx.zip
Select "Flash Image"
Flash a Generic System Image in system partition (arm64, A only)
Reboot
Special thanks:
Tranquilitysmile for testing and debugging
XDA:DevDB Information
Project Treble for the Xiaomi Mi Mix
Contributors
Psy_Man
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: 8.8.30
Based On: AOSP
Version Information
Status: Stable
Created 2018-05-01
Last Updated 2018-09-12
Screenshots:
Excellent looking forward to this
Add this line to build prop to enable navbar
Code:
qemu.hw.mainkeys=0
Great job, thanks
02.05.2018 build:
- Forced enable navigation bar (thanks @EvangelineDEV for pointing this out)
- Moved listen_platform_info.xml to /vendor
- Merged changes from LineageOS
Download build
This is awesome!
Thanks Pepsy!!!
Earphone does not work, is it a common problem ?
Great work!
woha, thanks @Psy_Man !
since this took me somewhat by surprise: how will the flashing-process with treble roms differ from the traditional way? after flashing the treble-zip (and doing a factory reset) for the first time, will it be possible to switch the generic system images without a factory reset every time like when switching a "traditional" rom? will you still continue your Pixel Experience rom or is Treble the way to go? and which TWRP meets the /vendor requirement? the TWRP-thread is a bit chaotic...
sorry for all those questions, really appreciate your work!
doumer said:
woha, thanks @Psy_Man !
since this took me somewhat by surprise: how will the flashing-process with treble roms differ from the traditional way? after flashing the treble-zip (and doing a factory reset) for the first time, will it be possible to switch the generic system images without a factory reset every time like when switching a "traditional" rom? will you still continue your Pixel Experience rom or is Treble the way to go? and which TWRP meets the /vendor requirement? the TWRP-thread is a bit chaotic...
sorry for all those questions, really appreciate your work!
Click to expand...
Click to collapse
I believe factory reset and wiping system and data are still needed between GSI's... But it should be tried...
Twrp by raupe-lunden.... Find it linked in most oreo roms threads op's I think.
For flashing generic procedure the instructions are linked right here in Psy_Man's OP
Using RR image, stuck at white android logo. Cannot go into OS, trying format data wipe all, result still same
Fusionist said:
Using RR image, stuck at white android logo. Cannot go into OS, trying format data wipe all, result still same
Click to expand...
Click to collapse
I cannot see logcat here. Ignored.
Psy_Man said:
I cannot see logcat here. Ignored.
Click to expand...
Click to collapse
I still dont know how people want us to solve these problems , if they dont provide logcat we cannot make magic and say OH this is!!!!!!! lol . Thanks Psy_Man for your treble work.
Psy_Man said:
I cannot see logcat here. Ignored.
Click to expand...
Click to collapse
Yup.
I also couldn't boot RR or AOKP... Will try and get logcats from the bootloop and share here a pastebin or the likes.
This treble advances for lithium I believe are awesome and undoubtedly the way to go.
Thanks again Psy_Man.
Psy_Man said:
I cannot see logcat here. Ignored.
Click to expand...
Click to collapse
Sorry for not provided logcat, I dont know how to getting logcat when my phone stuck at boot animation ? How can I get the logcat when stuck at boot?
Fusionist said:
Sorry for not provided logcat, I dont know how to getting logcat when my phone stuck at boot animation ? How can I get the logcat when stuck at boot?
Click to expand...
Click to collapse
If I recall correctly, running
Code:
adb -d logcat>mylogfile.txt
before the phone boots should wait until the phone boots and connects to the computer, provide you with a logcat, and save it to a file. (You won't see the output in the terminal, but the log file should be there. There's more information on this here.)
This looks great, good work! I'll try it in a bit and report back on how it works. Thanks again!
NLivingstonAP said:
If I recall correctly, running before the phone boots should wait until the phone boots and connects to the computer, provide you with a logcat, and save it to a file. (You won't see the output in the terminal, but the log file should be there. There's more information on this here.)
This looks great, good work! I'll try it in a bit and report back on how it works. Thanks again!
Click to expand...
Click to collapse
Many thanks ! I'll try it again
Hello i want to ask what is the benefit using the treble based custom rom? From what i know is the update is faster for oem eg samsung, lg or oem that used treble, but what is benefit using this on custom rom?
billyliem said:
Hello i want to ask what is the benefit using the treble based custom rom? From what i know is the update is faster for oem eg samsung, lg or oem that used treble, but what is benefit using this on custom rom?
Click to expand...
Click to collapse
You flash the treble compatible and then any GSI out there, that are cooked and usable for any treble enabled device. You don't need an aokp (or any other) cooked specifically for lithium.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for DeviceName [RMX1911]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 9.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
NFC
Lights
Sound / vibration
Facelock
Known issues
You Tell
DON'T FLASH GAPPS, ALREADY INCLUDED
Download
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 9.0.0_r46
Security patch level: December 2019
Build author/Device Maintainer: @iamlordutkarsh
Kernel Source code: https://github.com/realme-kernel-opensource/realme5-kernel-source
Device Tree: https://github.com/Realme-RMX1911/device_realme_RMX1911
Vendor Tree: https://github.com/Realme-RMX1911/vendor_realme_RMX1911
Source code: https://github.com/PixelExperience
ROM Developer: iamlordutkarsh
Bugs Found
1. CTS Failing
3. Aux Camera Support
2. Selinux Permissive
Hoping To Get Fixed Soon
mizdrake7 said:
Bugs Found
1. CTS Failing
3. Aux Camera Support
2. Selinux Permissive
Hoping Hoping To Get Fixed Soon
Click to expand...
Click to collapse
1. Use magisk props hide to fix it
2. I haven't found a workaround too, so F.
3. Yup, it's still a WIP
but overall it's already stable enough to use as an daily driver.
mizdrake7 said:
Bugs Found
1. CTS Failing
3. Aux Camera Support
2. Selinux Permissive
Hoping Hoping To Get Fixed Soon
Click to expand...
Click to collapse
CTS can be fixed via Magisk Module !
Other 2 we will look in future updates
I have a locked bootloader.. stock rom..
Please can anyone mention the steps to flash this ROM?
Unlock Bootloader First
Jaiii said:
I have a locked bootloader.. stock rom..
Please can anyone mention the steps to flash this ROM?
Click to expand...
Click to collapse
https://c.realme.com/in/post-details/1184729509568446464
Follow This Guide
I jave locked bootloader i can't root my device and can't flash twrp
What about lockscreen and fingerprint.?
iamlordutkarsh said:
CTS can be fixed via Magisk Module !
Other 2 we will look in future updates
Click to expand...
Click to collapse
how to flash this rom from realme ui
Please develop Android 10 rom
How to installing ?
wil fingerprint and face unlock work ?
Bug:
Can't connect to hidden wifi.
finally i done
i try many time but i cant, i unlock bootloader and flash TWRP and wipe all and Flash rom and restart but not thing heppen, What i miss
sseevaja said:
i try many time but i cant, i unlock bootloader and flash TWRP and wipe all and Flash rom and restart but not thing heppen, What i miss
Click to expand...
Click to collapse
Well, since this is a Custom ROM, I have noticed that some of them require you to flash a patched Vendor image just before flashing the ROM itself. Could this ROM be similar?
But, just so we're clear, the following are the steps you can follow (generally speaking):
Flash latest TWRP
Boot into your recovery
Wipe cache, dalvik cache, system,data, vendor, internal storage (if you're encrypted)
Flash Vendor image
Flash ROM
Flash Gapps (optional)
Reboot and wait for ROM to start
Hey guys!
I'm liking the ROM, but I just had a few questions:
1. Dark mode in settings isn't system-wide on my installation.
2. Photos aren't deleting. I delete them (tried with Camera app, Google Photos, and even File manager). But they're not deleting. It says deleted but they're still visible on phone. This photos issue I also experienced on Lineage 16.
Anybody have some ideas as to what I could do? I'd appreciate any help. Thanks!
boydee said:
Well, since this is a Custom ROM, I have noticed that some of them require you to flash a patched Vendor image just before flashing the ROM itself. Could this ROM be similar?
But, just so we're clear, the following are the steps you can follow (generally speaking):
Flash latest TWRP
Boot into your recovery
Wipe cache, dalvik cache, system,data, vendor, internal storage (if you're encrypted)
Flash Vendor image
Flash ROM
Flash Gapps (optional)
Reboot and wait for ROM to start
Click to expand...
Click to collapse
Vendor?
plss provide vendor link
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lineage os by @AndyYan
[DISCONTINUED][GSI][10] LineageOS 17.x GSI (all archs)
Background: This is a natural continuation/extension of the LineageOS 16.0 GSIs I've been making since March 2019. If you clicked in here, I bet you know what LineageOS is already, but just to fill the blank: LineageOS is a free, community built...
forum.xda-developers.com
Havoc os official GSI
Havoc-OS - Browse /arm64-aonly at SourceForge.net
sourceforge.net
Bliss os
TrebleGSI - Browse /BLESS/2020.10.15 at SourceForge.net
sourceforge.net
Pixel Experience by ExpressLuke
https://sourceforge.net/projects/expressluke-gsis/files/PixelExperience/Ten/20200328/PixelExperience-10.0-20200328-GSI-ARM64-Aonly.img.xz/download
Installing this one is a little tricky
First remove data encryption
[GUIDE] How to remove data encryption/password in TWRP for mediatek devices
Your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before...
forum.xda-developers.com
Install magisk 20.3 phh not 20.4 phh
https://sourceforge.net/projects/expressluke-gsis/files/Extras/phh-magisk-ten/Magisk-v20.3-15bd2da8-phh.zip/download
If changing from pixel experience to any other gsi, just restore boot.img and vendor.img or else you will face bugs like battery drain.
- Install TWRP (ported by me)
[twrp] [v3. 3.1] [micromax infinity n12] [treble recovery] Micromax Infinity n12 TWRP
Long wait over! Finally working TWRP for Micromax Infinity N12 - Full Treble Support -Capability to flash all GSI -ADB fully working - Latest version 3.1.1 - MTP - Encryption ( can be fixed but causes problems...
forum.xda-developers.com
- Transfer to SD card
- Wipe system, cache, format data
- Flash the image to system image
- Complete first boot. Then to root install magisk 20.4 phh. Not ordinary magisk.
Magisk-v20.4-phh-aonly.zip | by younes_bfd for Galaxy J6
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
- Restore stock boot.img before switching GSIs
All the GSIs are based on @phhusson work so the bugs will be similar
- Volte (bad news for jio users)
- Browser media player (Only on pixel experience)
None of these GSIs are made by me. I have just provided the guide. Thanks to
@phhusson for phh treble gsi
@AndyYan for lineage os gsi
@SKULSHADY for havoc os gsi
Developer Luke for pixel experience
Bliss roms team for Bliss os GSI
Only pixel experience worked for me.
But no volte, so I downgraded my android.
But you guys are superb
Thanks
Voolyo said:
Only pixel experience worked for me.
But no volte, so I downgraded my android☹.
But you guys are superb
Thanks
Click to expand...
Click to collapse
Did you restore stock boot.img before flashing? If it still doesn't boot try restoring vendor
Tab E said:
Did you restore stock boot.img before flashing? If it still doesn't boot try restoring vendor
Click to expand...
Click to collapse
Tab E said:
Did you restore stock boot.img before flashing? If it still doesn't boot try restoring vendor
Click to expand...
Click to collapse
Actually am a noob,but I will try it.
Thanks for the reply
Tab E said:
Did you restore stock boot.img before flashing? If it still doesn't boot try restoring vendor
Click to expand...
Click to collapse
What does this restoring means?
Voolyo said:
What does this restoring means?
Click to expand...
Click to collapse
Check the phone firmware for vendor.img
Transfer it to your phone and flash it with TWRP
Can you please explain the steps.
Voolyo said:
Can you please explain the steps.
Click to expand...
Click to collapse
1. Install stock rom
2. Install TWRP
3. Open twrp
4. Wipe data system
5.select falsh image
6. Select the downloaded GSI
Roboot
Thanks
Nothing happened always stuck at fastboot mode
Voolyo said:
Nothing happened always stuck at fastboot mode
Click to expand...
Click to collapse
Are you having TWRP Running?
Tab E said:
Are you having TWRP Running?
Click to expand...
Click to collapse
Is there anyway to enable VoLTE.
Voolyo said:
Is there anyway to enable VoLTE.
Click to expand...
Click to collapse
No. Unfortunately, android 11 devices have a funny bug. It boots, but the screen keeps moving up and down. Whole screen glitches. You can't even unlock the phone to enable developer options to take logs
Tab E said:
No. Unfortunately, android 11 devices have a funny bug. It boots, but the screen keeps moving up and down. Whole screen glitches. You can't even unlock the phone to enable developer options to take logs
Click to expand...
Click to collapse
Ok thanks
After finally unlocking the bootloader, installed TWRP 3.6.0 and rotted with Magisk v23.0. Lets find a custom ROM that suits this phone - WRONG!
I have tried many types of ROM and so far it ends in soft brick. Need advise if you have any. My aim is to install a basic custom ROM , install pico or nano GAPP, and only install like 4 apps on it. phone, sms, navigation, music player etc.
I have tried the following ROM:
Phhusson-treble AOSP andriod version 9, 11 & 12.
GSI arm64 ab ROM
a so call stock ROM
I also tried installing the vendor.img as described here
I would like to use LineageOS but there doesn't seem to be one for this phone
I am now resorting to installing the stock firmware to make the phone work again, instruction here
If anyone has sucessfully rooted this phone using a basic ROM and GAPP please share how you did it and where your download was.
Why did phhuson fail ? That's the basic gsi, every other gsi are build on top of that. If that doesn't work, nothing will.
Fytdyh said:
Why did phhuson fail ? That's the basic gsi, every other gsi are build on top of that. If that doesn't work, nothing will.
Click to expand...
Click to collapse
I install - system-arm64 –ab
I did some research that the Doogee n20 is a arm64 and a+b .... Unless I got the wrong information.
I suspect there maybe some stock firmware files that needs to be installed as well to make it work properly.
A post said it needs vendor.img, I might try sourcing another copy.
Follow up - I got it un-bricked with the stock firmware (android 9) (link in my original post) .... Back to square one .
jackjack1885 said:
I install - system-arm64 –ab
I did some research that the Doogee n20 is a arm64 and a+b .... Unless I got the wrong information.
I suspect there maybe some stock firmware files that needs to be installed as well to make it work properly.
A post said it needs vendor.img, I might try sourcing another copy.
Follow up - I got it un-bricked with the stock firmware (android 9) (link in my original post) .... Back to square one .
Click to expand...
Click to collapse
Search treble info, it will tell you exactly any treble related information.
Fytdyh said:
Search treble info, it will tell you exactly any treble related information.
Click to expand...
Click to collapse
Many thanks, didn't do that step.
Did it now, it shows it needs system-arm64-ab
I got the right one. Not sure about the VNDK 28.0 doesn't really say on the webpage.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tried android 9 (the phones original version) 11, and 12..... No luck.
follow advices from this https://forum.xda-developers.com/t/doogee-n20-twrp.4136331/
and this https://forum.xda-developers.com/t/...loop-after-any-custom-rom-doogee-n20.4357313/
Hey man, did you get it fixed?
Actually this device is A-only, but you should use Gsis A/B.
Most Phh based Gsi works almost perfectly for me.
You can try this:
- Download and install Twrp 3.6.1 here
- Download LineageOS 18.1 (lir) here Choose "arm64 bvZ" version
- Download stock rom here or Y9Plus variant here
- Extract the Gsi, and the vendor image from the stock rom
- I restarted in Twrp, go to wipe and select system, data, cache...
- Go install and flash the Gsi as system image, and vendor as vendor image
-reboot
AtS17 said:
Hey man, did you get it fixed?
Actually this device is A-only, but you should use Gsis A/B.
Most Phh based Gsi works almost perfectly for me.
You can try this:
- Download and install Twrp 3.6.1 here
- Download LineageOS 18.1 (lir) here Choose "arm64 bvZ" version
- Download stock rom here or Y9Plus variant here
- Extract the Gsi, and the vendor image from the stock rom
- I restarted in Twrp, go to wipe and select system, data, cache...
- Go install and flash the Gsi as system image, and vendor as vendor image
-reboot
Click to expand...
Click to collapse
Thanks for the links!
Are you able to add this old firmware please? https://cloud.mail.ru/public/mCzU/5PX4cKPfH
I can't download it, i found it on 4pda (Mod Action: Link removed)
I'm trying to delete the red "TEE key not write" message.
Welcome guys ! Today want share this guide, particularly since this tablet model had a issues flashing GSI ROMS. In my case and other people's, the Audio don't work (In my BAH2-W19 8.0.0.322 Or 8.0.0.371(OCEC605). However thanks to @AltairFR the which developt a new patch and was possible create fix it.
I going to quote and modify the post of @AltairFR -> LeaOS18.1 by Iceows for this guide.
Pre-requisite :
You must have TWRP installed, use this one (make sure to have the unofficial Android 11 one ! ). To install follow this guide "How to unlock Huawei P8 ligt 2017 (en).pdf" or french version "How to unlock Huawei P8 ligt 2017 (fr).pdf"
Installation (crypt or uncrypt)
Download file : “LeaOS-PRA Vanilla lastest" in this case I've used LeaOS-18.1-20221115-iceows-pra. Download and extract img file (DOWNLOAD THE PRA FOR THIS TABLET BAH2)
run:
Code:
fastboot flash system <drag system.img here>
boot to TWRP
Wipe cache, dalvik/art cache, internal storage and data
resize system
flash this file (VERY IMPORTANT OR COULD GET A BOOTLOOP) 1-Huawei-DataPrep-DeCrypt-A-v1.0-signed.zip (For this tablet I've tested only DeCrypt version) to not-allow data encryption or this file 1-Huawei-DataPrep-Crypt-A-v1.0-signed.zip to allow it
(optional) flash patches :
0 - Magisk: Magisk Lastest Version For this case I've Downloaded Magisk-v25.2.apk (Rename as .zip to be flash, and keep as APK to install) FLASH (Optional STEP)
1 - MicroG (is a Google FOSS Alternative): MinMicroG NoGooLag Version or Google Apps lite : [RECOVERY]LiteGapps_arm64_11.0_v2.6_official.zip
2 - Enable AGPS : 7-AGPS-FIX-AltairVendor-v3.6-signed.zip (I've not tested it in my tablet BAH2, i dont use maps)
3 - Huawei-BAH2-FixAudio-v1.0-signed (FLASH ONLY IF YOU DONT HAVE AUDIO SOUND - Download in the Attach Files)
4 - Huawei-BAH2-FixPreav-A-v1.1-signed (Its for DRM and Netflix problems - Download in the Attach Files)
reboot to System and set up the phone with Lineage first start assistant. You can also add most user
Enjoy !!!
Update (crypt or uncrypt)
Download file : “LeaOS-PRA lastest" in this case I've used LeaOS-18.1-20221115-iceows-pra Download and extract img file
run:
Code:
fastboot flash system <drag system.img here>
boot to TWRP
Wipe cache, dalvik/art cache
resize system
(optional) flash patches :
0 - Reflash Magisk: Magisk Lastest Version For this case I've Downloaded Magisk-v25.2.apk (Rename as .zip to be flash, and keep as APK to install) FLASH (Optional STEP)
1 - Reflash MicroG (is a Google FOSS Alternative): MinMicroG NoGooLag Version or Google Apps lite : [RECOVERY]LiteGapps_arm64_11.0_v2.6_official.zip
2 - Enable AGPS : 7-AGPS-FIX-AltairVendor-v3.6-signed.zip (I've not tested it in my tablet BAH2, i dont use maps)
3 - Huawei-BAH2-FixAudio-v1.0-signed (FLASH ONLY IF YOU DONT HAVE AUDIO SOUND - Download in the Attach Files)
4 - Huawei-BAH2-FixPreav-A-v1.1-signed (Download in the Attach Files)
reboot to System
Enjoy !!!
Source Code:
https://github.com/Iceows
ROM OS Version: Android 11
ROM Kernel: Linux 4.4.x (stock 4.4.23+)
ROM Firmware Required: EMUI 8
Based On: LineageOS (AndyGCYan)
Credits:
@DarkJoker360
@hamido
@AndyCGYan
@PHH
@eremitein
@RakinTheGreat (GCam)
@TureX (Kernel)
And all the others who tested my patches and helped me improve this ROM
[Fix] Font BLURif you have problem like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
You could solve easily
Go to System > Display > LiveDisplay > Color Calibration
Now you can set in 99% a color like Blue. See image:
Click to expand...
Click to collapse
In this moment the blur font should had been fixed
Special Thanks to the Iceows (@AltairFR) for dedicates to helping us and build these codes
If need help, ask in the Telegram Group
LeaOS official group
Release channel: @leaos_group
Amazing work good sir!!
After some problems the installation worked.
Can i also use a A12 GSI-Rom with this workaround?
Netflix ist not working, error (5.0).
SERGE4NT said:
After some problems the installation worked.
Can i also use a A12 GSI-Rom with this workaround?
Click to expand...
Click to collapse
A12 Need other things, for this model is not tested and for similar like m5 works very bad.
SERGE4NT said:
Netflix ist not working, error (5.0).
Click to expand...
Click to collapse
What is you model device? Do you flash the FixPreav? you need also pass safety. Please check in the telegram group!.
Milor123 said:
What is you model device? Do you flash the FixPreav? you need also pass safety. Please check in the telegram group!.
Click to expand...
Click to collapse
My model is BAH2-W19 8.0.0.371(OCEC432)
I tried it with and without FixPreav. I have not rooted. On Stock-rom, netflix is working.
SERGE4NT said:
My model is BAH2-W19 8.0.0.371(OCEC432)
I tried it with and without FixPreav. I have not rooted. On Stock-rom, netflix is working.
Click to expand...
Click to collapse
I will try report it to @AltairFR in telegram group, please go and keep seen the conversation. please go to group and send screenshots, can you share a logcat?
Milor123 said:
I will try report it to @AltairFR in telegram group, please go and keep seen the conversation. please go to group and send screenshots, can you share a logcat?
Click to expand...
Click to collapse
@AltairFR or @iceows ?
AltairFR said:
@AltairFR or @iceows ?
Click to expand...
Click to collapse
@iceows in telegram and @AltairFR Here hahah :3 thanks bro
Ok, I read in the Group, that we have to use Netflix.6.26.1.apk. I will try it.
SERGE4NT said:
Ok, I read in the Group, that we have to use Netflix.6.26.1.apk. I will try it.
Click to expand...
Click to collapse
With emui8 use only Netflix 6.26
With emui9 with safetynet ok, you can use the last version of Netflix 8
Now, Netflix 6.26 works.
Wow this worked! Thank you so much!!! It's breathed life into this older, but perfectly functional, tablet.
Does anyone have a guidance then can give me on how to set the kernel to 'permissive'?
PHH Treble settings >>Huawei Features >> Enable fingerprint gestures. this function doesnt work. turning it on or off doesnt allow using the implemented fingerprint gesture
Will this ROM work if I format data as f2fs?
Yes