Database Info

[Guide][Updated 2016] Install CM12.1 (Android 5.1.1 Lollipop) on GT-S7582

Hey Guys,
Many People are confused how to install CM 12.1 (lollipop) ROM on our device.
So, here's a brief Guide.
Part 1: Installing Recovery
1. Download TWRP Recovery From the Link: https://www.androidfilehost.com/?fid=24407100847293110
2. Download ODIN From this link. http://odindownload.com/download/Odin3_v3.10.7.zip
3. Install Samsung USB Drivers. http://androidhost.org/XIVsA
4. Extract Odin and run odin.exe on your pc.
5. Shut Down your Phone and Press Volume down + power button + home button simultaneously.
6. Press Continue.
7. Open Odin on your pc and select AP and browse to the recovery file you downloaded.
8. It shows port no in ID:COM section. Dont touch any other thing and press start.
9. Now, Your Phone will automatically rebooted.
Part 2 : Installing ROM
10. Download these stuff and copy them to ur microsd card.
CM 12.1 - 6 March Update - https://www.androidfilehost.com/?fid=24438995911971793
GAPPS (For Play Store) - https://www.androidfilehost.com/?w=files&flid=31528
11. Shut Down your Phone and press Volume Up + Power + Home at same time.
12. TWRP Recovery will now open.
Note:When entering TWRP Recovery, it will ask you if you want to keep system partition Read only, check the box "Never show this screen during boot again" and swipe the lock bar, else you can't modify system partition in TWRP like install ROM, root...
13. Select Wipe and wipe cache, dalvik cache, system, internal storage,data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
14. Select Install and select the rom file and install it. (it may take some time)
15. Now Select Install again and select gapps zip and reboot system and you are all done.
Hit Thanks if this is useful for you.
Leave your FeedBack
use same procedure for flashing cm11 as well but obviously download cm11 rom and gapps for android 4.4.4

Thank you

i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?

did it get completed on odin? Try changing usb cable and usb port

Will it work with cwm
And also is it necessary to download (gapps)

Does it have to be stock frimware so the rom could be installed?

Thank's DEV @SandPox for this nice ROM and for the effort to do for all bugs.
__________ OFFICCIAL _________
http://forum.cyanogenmod.org/topic/...galaxy-trend-plus-s-duos-2-gt-s7580-gt-s7582/

please help
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap

How to fix deadlock or headset problem...
Experimental kernel
https://www.androidfilehost.com/?fid=24269982087004359
Code:
Note for who don't know how to upgrade kernel:
This zip file are not supposed to be flash in recovery
extract it 1 time, you'll get modules/ and kernel.tar
kernel.tar flash by odin or extract it to get boot.img and flash it by any method you want
modules/* copy to /system/lib/modules/, old file must be delete and copy new file to there (remember to backup old modules)
this kernel are supposed to not have any deadlock or headset problem, report to me if anything gone wrong
remember to backup your old kernel
know problem: incall make phone crash, will fix later
damn.. i forgot to fix RIL for s7582, RIL will not work for s7582
surprise: I just know how to fix dialer lag, our phone kernel set the limit to 60fps maximum frame rate, I tried to increase it to 70fps and dialer lag is gone xD
Credits:
Sandpox

Its not installing . I tried it . Showing an error but gaaps is working.

rahulhanda20 said:
Will it work with cwm
And also is it necessary to download (gapps)
Click to expand...
Click to collapse
Try CWM..
Gapps is for play store and framework

munthir said:
Does it have to be stock frimware so the rom could be installed?
Click to expand...
Click to collapse
Not necessary but recomended

alay shah said:
I have s duos 2 -7580 with cm 11 i am currently using. whwn i flash cm 12.1 with twrp it shown E:\Unable to mount System.Please give me solution of this problem...asap
Click to expand...
Click to collapse
i think u have selected read only whenu opened twrp first time...
Install TWRP again and uncheck read only check on dont ask again and continue...and it will work

Light Hope said:
Its not installing . I tried it . Showing an error but gaaps is working.
Click to expand...
Click to collapse
What Error u got

Mohned said:
i got a propleme.. TWRP doesn't open at all .. like it's not even intalled.. can you help please ?
Click to expand...
Click to collapse
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:

tried that solution but still it shows same error... e unable to mount system

For this do we need to be on CM 11 ????

Light Hope said:
For this do we need to be on CM 11 ????
Click to expand...
Click to collapse
It doesnt matter whether u are on cm11 or stock unless u wipe everything (except external sd) before install

abbi339 said:
Even I also faced the same situation... I flashed twrp but it's directly going into android recovery not to twrp recovery...But i got a solution from Xda-developers... I used odin to flash twrp into my mobile while doing i unchecked the auto reboot option in odin. after flashing its working.......:good:
Click to expand...
Click to collapse
Thanks alot for replying me^^ .. i'll try this and tell you the results later ..oh and sorry for my bad English

Wow!
It works, no problem.
Can u please tell me how could I root now?
Last time I use I-root but, now its not working.
Give me a instruction please.

Alpha ROM (AOSP Android 11)

New Android 11 GSI ROM based on Phhusson's AOSP . Really good, stable enough to be used as your daily driver. No major bugs. Preinstalled SuperUser, Android Auto, smart "Keep Notes" etc...
Bored during quarantine? Try this great ROM!
Note: Tested on 9.1.0.132.
Credits: @berkay-gsi
Requirements: basically full stock EMUI 9.1, with stock recovery.
IMPORTANT! Before booting up the ROM, you will need to perform a factory reset in stock recovery!
1. Download system-alpha ROM
ROM
2. Extract the .img file from the compressed file.
3. Flash extracted system.img from fastboot , use command
fastboot flash system (file_name).img
4. Run command 'fastboot reboot', unplug your phone, when on the screen appears yellow warning, press and hold for 3 sec Volume Up . In eRecovery select 'Wipe data/factory reset'. Reboot .
NFC:
- Download NFC Patch
- Install
TWRP
over eRecovery (it makes things easier) - follow this
guide
- In TWRP unmount all except SD Card , Vendor and System (unmount and mount again)
- Flash nfc_universal_patch.zip
- From TWRP menu reboot into recovery and perform factory reset .
Note: you can flash NFC patch before booting up the ROM
How?
Tip: use "Simple Gallery"
download
Enjoy !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Some banking apps refuse to work on rooted devices, is it possible to use those on that rom?

CrystalCase said:
Some banking apps refuse to work on rooted devices, is it possible to use those on that rom?
Click to expand...
Click to collapse
-Alf- said:
Preinstalled SuperUser,
Click to expand...
Click to collapse

Thanks for the information! I do not want to break anything so I would like to follow a more detailed 'tutorial'. I did search for some, but I am not sure which I can use to install this particular rom. Is there one you can recommend? Like somthing for beginners?

CrystalCase said:
Thanks for the information! I do not want to break anything so I would like to follow a more detailed 'tutorial'. I did search for some, but I am not sure which I can use to install this particular rom. Is there one you can recommend? Like somthing for beginners?
Click to expand...
Click to collapse
No flashing instructions for beginners are offered, sorry. If you're here in this section, you should know what you're doing. More detailed guide can be found here and here .
Read the instructions carefully and completely, check unfamiliar terminology by google or xda.
The instructions do not perform, if you do not know what you're doing.
P.S.: keep in mind, that this ROM is rooted with build-in SuperUser , and you cannot turn off SuperUser!

-Alf- said:
No flashing instructions for beginners are offered, sorry. If you're here in this section, you should know what you're doing. More detailed guide can be found here and here .
Read the instructions carefully and completely, check unfamiliar terminology by google or xda.
The instructions do not perform, if you do not know what you're doing.
P.S.: keep in mind, that this ROM is rooted with build-in SuperUser , and you cannot turn off SuperUser!
Click to expand...
Click to collapse
Okay thanks. I kinda know what I am doing, at least I know what I want. My last time is some years ago on samsung devices so I am not into the new phoes but I will read some and go for it.

Hi Alf! Is always me ahaha.
Anyway I wanted to ask you if it makes sense to switch from LineageOS 18.1 to this one here, or they are the same (especially in terms of stability). I also would like to know if there is a way to avoid loosing the unlocked bootloader when I have to switch to stock firmware. Thank you

Anonymousxx said:
Hi Alf! Is always me ahaha.
Anyway I wanted to ask you if it makes sense to switch from LineageOS 18.1 to this one here, or they are the same (especially in terms of stability). I also would like to know if there is a way to avoid loosing the unlocked bootloader when I have to switch to stock firmware. Thank you
Click to expand...
Click to collapse
Hello, what about your exams stage? O.K.?

-Alf- said:
Hello, what about your exams stage? O.K.?
Click to expand...
Click to collapse
What do you mean? ahahah

Anonymousxx said:
Hi Alf! Is always me ahaha.
Anyway I wanted to ask you if it makes sense to switch from LineageOS 18.1 to this one here, or they are the same (especially in terms of stability). I also would like to know if there is a way to avoid loosing the unlocked bootloader when I have to switch to stock firmware. Thank you
Click to expand...
Click to collapse
Can anyone more polite answer me please? Thank you

-Alf- said:
New Android 11 GSI ROM based on Phhusson's AOSP . Really good, stable enough to be used as your daily driver. No major bugs. Preinstalled SuperUser, Android Auto, smart "Keep Notes" etc...
Bored during quarantine? Try this great ROM!
Note: Tested on 9.1.0.132.
Credits: @berkay-gsi
Requirements: basically full stock EMUI 9.1, with stock recovery.
IMPORTANT! Before booting up the ROM, you will need to perform a factory reset in stock recovery!
1. Download system-alpha ROM
ROM
2. Extract the .img file from the compressed file.
3. Flash extracted system.img from fastboot , use command
fastboot flash system (file_name).img
4. Run command 'fastboot reboot', unplug your phone, when on the screen appears yellow warning, press and hold for 3 sec Volume Up . In eRecovery select 'Wipe data/factory reset'. Reboot .
NFC:
- Download NFC Patch
- Install
TWRP
over eRecovery (it makes things easier) - follow this
guide
- In TWRP unmount all except SD Card , Vendor and System (unmount and mount again)
- Flash nfc_universal_patch.zip
- From TWRP menu reboot into recovery and perform factory reset .
Note: you can flash NFC patch before booting up the ROM
How?
Tip: use "Simple Gallery"
download
Enjoy !
View attachment 5214123View attachment 5214125View attachment 5214127View attachment 5214129View attachment 5214131View attachment 5214133View attachment 5214137View attachment 5214139
Click to expand...
Click to collapse
any new updates and changes for this rom out yet?

lucsol said:
any new updates and changes for this rom out yet?
Click to expand...
Click to collapse
I don't know bro, but try looking here:
berkai-gsi

Development [RECOVERY][UNOFFICIAL] TWRP 3.5.2 for Moto Edge S

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Compatible with Lineage Modded 18.1 only!
Instructions
1. Download TWRP image
2. fastboot boot twrp-3.5.2_11.0-2-nio.img
3. Enter Passcode if you have to decrypt /sdcard
4. adb push twrp-3.5.2_11.0-2-nio.img /sdcard
5. Click Backup -> Only Select Boot and Swipe to Backup
6. Go back to Main Menu, -> Advanced -> Install Recovery Ramdisk
7. Find and Select twrp-3.5.2_11.0-2-nio.img -> Swipe to Install
8. Done! If any issues, restore the backup made before.
Downloads
https://build.lolinet.com/file/twrp/nio/twrp-3.5.2_11.0-2-nio.img
Donations
https://paypal.me/electimon
Contributors
@Electimon, betaxab
Version Information
SourceCode: https://github.com/ixmoe/android_device_motorola_nio_twrp/tree/twrp-11.0
Version Information
Status: Stable
Release Date: July-9-2021
Last Updated: July-9-2021

That's great! Waiting for the fixes and the TWRP Installer.

Nice work Dev ! I will test with Lineage Modded later today , thanks a lot .

Lineage modded is not distributed as an OTA package.

Everything working so far with LOS Modded on The G100 Model. Thanks dev !

Will there be a version compatible with stock ROM?

gewe said:
Will there be a version compatible with stock ROM?
Click to expand...
Click to collapse
When I figure out how todo it yes

Electimon said:
When I figure out how todo it yes
Click to expand...
Click to collapse
Is recovery somehow tied to the ROM? I thought recovery can be anything regardless of what the ROM is, as long as bootloader is unlocked.

Tried while stock rom was installed. Its fine when booted from fastboot. But if installed, touchscreen doesn't work.
Will try on lineage modded and see.
Edit: it works with a mouse. So touchscreen doesn't work, yet to try on lineage modded.

can't start adb sideload mode .
failed reason unkown.
lsusb shows no device presented while enter the sideload mode.

i flashed it directly, like this:
Code:
fastboot flash boot twrp-3.5.2_11.0-2-nio.img
is this ok ?

Hello,
What's going on with TWRP? twrp-3.5.2_11.0-3-nio.img just flashes and won't work and twrp-3.5.2_11.0-2-nio.img isn't booting on my G100 any ideas?
Thanks

Hello,
Finally was able to get this installed on my Moto G100 but it's essentially useless. I can't access the internal flash on the unit from Windows in MTP mode after formatting flash to wipe so I can install lineageOS and Gapps. Essentially have to get LOSrecovery installed and then do sideload because I can't do what I need to with this. The newer version just flashes the screen. Are we going to get one that actually works?
Thanks!

marcusah123 said:
Hello,
Finally was able to get this installed on my Moto G100 but it's essentially useless. I can't access the internal flash on the unit from Windows in MTP mode after formatting flash to wipe so I can install lineageOS and Gapps. Essentially have to get LOSrecovery installed and then do sideload because I can't do what I need to with this. The newer version just flashes the screen. Are we going to get one that actually works?
Thanks!
Click to expand...
Click to collapse
Yes I have a beta version that has that functionaility working already, just working on slot switching bugs.

Hello,
Awesome!!!! Cannot wait to give it a go. You're doing great work and I hope to use this along with LineageOS and have this as my new phone to use!! WOOOHOO!
Thanks and sorry if I came across as rude!
Additionally I can't sideload gapps as it says there isn't enough room... uhg these two slot phones essentially suck a lot... the DooGee S95 Pro I have is so much simpler!

ETA? Oh yea sorry don't ask for ETAs ever!

Oh I just hope it's soon so I can start using the phone. Do you need some bug spray?
Anyhow I'll use whatever version you have A/B switching aside because you can switch from A to B easily with fastboot, while you work out the last bugs.
Thanks and appreciate your work.
And then I ask for an update!

Any updates or development of this?

funciona para moto g 100?

Hi

Doogee N20 - Some phones are just hard to modify

After finally unlocking the bootloader, installed TWRP 3.6.0 and rotted with Magisk v23.0. Lets find a custom ROM that suits this phone - WRONG!
I have tried many types of ROM and so far it ends in soft brick. Need advise if you have any. My aim is to install a basic custom ROM , install pico or nano GAPP, and only install like 4 apps on it. phone, sms, navigation, music player etc.
I have tried the following ROM:
Phhusson-treble AOSP andriod version 9, 11 & 12.
GSI arm64 ab ROM
a so call stock ROM
I also tried installing the vendor.img as described here
I would like to use LineageOS but there doesn't seem to be one for this phone
I am now resorting to installing the stock firmware to make the phone work again, instruction here
If anyone has sucessfully rooted this phone using a basic ROM and GAPP please share how you did it and where your download was.

Why did phhuson fail ? That's the basic gsi, every other gsi are build on top of that. If that doesn't work, nothing will.

Fytdyh said:
Why did phhuson fail ? That's the basic gsi, every other gsi are build on top of that. If that doesn't work, nothing will.
Click to expand...
Click to collapse
I install - system-arm64 –ab
I did some research that the Doogee n20 is a arm64 and a+b .... Unless I got the wrong information.
I suspect there maybe some stock firmware files that needs to be installed as well to make it work properly.
A post said it needs vendor.img, I might try sourcing another copy.
Follow up - I got it un-bricked with the stock firmware (android 9) (link in my original post) .... Back to square one .

jackjack1885 said:
I install - system-arm64 –ab
I did some research that the Doogee n20 is a arm64 and a+b .... Unless I got the wrong information.
I suspect there maybe some stock firmware files that needs to be installed as well to make it work properly.
A post said it needs vendor.img, I might try sourcing another copy.
Follow up - I got it un-bricked with the stock firmware (android 9) (link in my original post) .... Back to square one .
Click to expand...
Click to collapse
Search treble info, it will tell you exactly any treble related information.

Fytdyh said:
Search treble info, it will tell you exactly any treble related information.
Click to expand...
Click to collapse
Many thanks, didn't do that step.
Did it now, it shows it needs system-arm64-ab
I got the right one. Not sure about the VNDK 28.0 doesn't really say on the webpage.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tried android 9 (the phones original version) 11, and 12..... No luck.

follow advices from this https://forum.xda-developers.com/t/doogee-n20-twrp.4136331/
and this https://forum.xda-developers.com/t/...loop-after-any-custom-rom-doogee-n20.4357313/

Hey man, did you get it fixed?
Actually this device is A-only, but you should use Gsis A/B.
Most Phh based Gsi works almost perfectly for me.
You can try this:
- Download and install Twrp 3.6.1 here
- Download LineageOS 18.1 (lir) here Choose "arm64 bvZ" version
- Download stock rom here or Y9Plus variant here
- Extract the Gsi, and the vendor image from the stock rom
- I restarted in Twrp, go to wipe and select system, data, cache...
- Go install and flash the Gsi as system image, and vendor as vendor image
-reboot

AtS17 said:
Hey man, did you get it fixed?
Actually this device is A-only, but you should use Gsis A/B.
Most Phh based Gsi works almost perfectly for me.
You can try this:
- Download and install Twrp 3.6.1 here
- Download LineageOS 18.1 (lir) here Choose "arm64 bvZ" version
- Download stock rom here or Y9Plus variant here
- Extract the Gsi, and the vendor image from the stock rom
- I restarted in Twrp, go to wipe and select system, data, cache...
- Go install and flash the Gsi as system image, and vendor as vendor image
-reboot
Click to expand...
Click to collapse
Thanks for the links!
Are you able to add this old firmware please? https://cloud.mail.ru/public/mCzU/5PX4cKPfH
I can't download it, i found it on 4pda (Mod Action: Link removed)
I'm trying to delete the red "TEE key not write" message.

[ROM] [OFFICIAL][A13][GApps][GCam] BlissRoms 16.x [guacamole]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BlissRoms comes with a wide selection of customization options from around the Android community as well as unique options developed by our team. With so many options available, you’ll find it hard not to enjoy the Blissful experience.
Our focus is to bring the Open Source community a quality OS that can run on all your devices as a daily driver, syncing your apps + settings + customization's across all platforms you run Bliss on.
BlissRoms Download
Code:
[/B][/SIZE][/CENTER]
[SIZE=5][B][CENTER]-Make sure you are on the latest OOS 12
- Dump the BlissROM zipfile through payload_dumper
- flash the partition images with the following commands
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash odm odm.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- Reboot and #StayBlissful
​
Create Bug Report on our Issues Tracker
BlissRoms Github
BlissRoms Gerrit
Kernel Source
| Website | Blog | Facebook | Twitter | Instagram | Telegram Group | Telegram Channel | Docs
If someone wants to donate, please do so via this PayPal link
Thank you for using BlissRoms! And as always: #StayBlissful​

Notes:Oneplus Cam included but video recoerding is not working. GCam GO is also included.

reserved too

I see the installation process is different than the usual factory wipe from recovery, and then flash zip to both sides. Would this process not work?

jp85041 said:
I see the installation process is different than the usual factory wipe from recovery, and then flash zip to both sides. Would this process not work?
Click to expand...
Click to collapse
There are a couple of ways to flash this rom. The important thing is that you are on the latest OOS 11 on the slot you are going to flash the rom on. One way to flash is to follow the install instructions in the first post or what I like to do is flash it through twrp. The problem is decryption doesn't work so you will have to have the rom image on a flash drive. I always recommend formatting data when the android version changes.

Noob question here. Why is it necessary to get the various img files via payload dumper? Why can't they just be assembled in a rar/zip file? Thanks

I love the ROM, haven't ran Bliss since the OnePlus One iirc, not bad at all. Visible works too so that's a plus. Thank you! Aside from going with something like substratum, is there a way to change accent color? I looked in Themes under Blissify settings but can't find where to change it. The only bugs I have had was the screen not coming back up until clicking power but it was literally one time and only waited 5 seconds to resolve.

Does it have built-in phone recorder

Not by default as far as I have seen, not something I looked into that closely. Fun note, my phone is also a bit glitchy compared to others, so don't take my weird issues as representative of the entire ROM, but if I watch videos that have too loud of a noise and I have my volume turned all the way up, my phone powers down. Happened on the daily dose of internet video where they show a slow motion bolt being cut.

Bliss is one of the best custom roms I have experienced, thanks for beating this titan work to support oneplus 7 pro

New build v16.2
Many new features
Built on OOS 12 firmware
GCam
Download: https://downloads.blissroms.org/media/guacamole/Bliss-v16.2-guacamole-OFFICIAL-gapps-20221226.zip
Rom Changelog: https://blog.blissroms.org/2022-12-06-typhoon-16.2-updates-dec-2022/
Enjoy!

srgrusso said:
There are a couple of ways to flash this rom. The important thing is that you are on the latest OOS 11 on the slot you are going to flash the rom on. One way to flash is to follow the install instructions in the first post or what I like to do is flash it through twrp. The problem is decryption doesn't work so you will have to have the rom image on a flash drive. I always recommend formatting data when the android version changes.
Click to expand...
Click to collapse
Are you sure we need to be on oos11 firmware? Most other A13 roms require A12 firmware

bobbylo said:
Are you sure we need to be on oos11 firmware? Most other A13 roms require A12 firmware
Click to expand...
Click to collapse
A12 Firmware. I flashed a couple days back. Running great.

sfacimma said:
A12 Firmware. I flashed a couple days back. Running great.
Click to expand...
Click to collapse
ok,thanks

bobbylo said:
ok,thanks
Click to expand...
Click to collapse
hey,one more question,How did you flash this,just from the bootloader?Or from the recovery fastboot mode? Thanks

what may be the problem when I use bliss 16.2 in oneplus 7 pro the phone heats up quite a bit and discharges quickly while with other roms everything is normal

bobbylo said:
hey,one more question,How did you flash this,just from the bootloader?Or from the recovery fastboot mode? Thanks
Click to expand...
Click to collapse
Sorry. Didn't see this earlier. Here's what I did......
Extract the boot.img from the payload.bin
From cmd prompt:
adb reboot bootloader
Once in bootloader, and from cmd prompt:
fastboot flash boot boot.img
Reboot to Recovery
--wipe/format (you'll lose all data/pics/files)
--Install via ADB option (I forget the actual option name)
Then, from cmd prompt on PC:
adb sideload Rom_Name.zip
When completed (after sitting at 47% for a while):
--Reboot to System option

Thanks for this Bliss, nice work !

sfacimma said:
A12 Firmware. I flashed a couple days back. Running great.
Click to expand...
Click to collapse
Can you guide me how I should flash oos 12 on both slots? since MSM tool only flashes to one slot

Obnomus said:
how I should flash oos 12 on both slots?
Click to expand...
Click to collapse
Go to crDroid 13 thread, it says in red text where to get the tool for flashing 12 firmware in both slots.