Question S22U S-pen Sensitivity - Samsung Galaxy S22 Ultra

Just picked up an S22U, coming from a Note 10+. I've noticed I have to press significantly harder for the S-pen to register on the S22U than on the Note 10+ and Tab S7+. Drawing, scrolling, button presses, pretty much everywhere. S-Pen presses virtually never register when the pen is at an angle.
No case, no screen protector. I've disabled accidental touch protection and turned on the increased touch sensitivity. The hover function appears to work, I just have to press rather hard to press buttons/scroll/write in comparison to these older devices.
I've tried all 3 S-pens and can confirm they are not the issue. Also did the built-in S-pen reset. Verizon has disabled the #0# diagnostics tool, so I can't check anything there unfortunately. Factory reset is the only thing left that I can think of before requesting an exchange.
There doesn't seem to be much discussion here, but in one thread, a user mentioned that he can lightly drag his S-pen across the screen applying as little pressure as possible and the phone will recognize the input and scroll, draw, etc. On my S22U, that's definitely not the case. Much closer on the other two devices.
Anyone else who has used older devices as well as the S22U able to comment on sensitivity/pressure/input recognition? Cheers

dismantelope said:
Just picked up an S22U, coming from a Note 10+. I've noticed I have to press significantly harder for the S-pen to register on the S22U than on the Note 10+ and Tab S7+. Drawing, scrolling, button presses, pretty much everywhere. S-Pen presses virtually never register when the pen is at an angle.
No case, no screen protector. I've disabled accidental touch protection and turned on the increased touch sensitivity. The hover function appears to work, I just have to press rather hard to press buttons/scroll/write in comparison to these older devices.
I've tried all 3 S-pens and can confirm they are not the issue. Also did the built-in S-pen reset. Verizon has disabled the #0# diagnostics tool, so I can't check anything there unfortunately. Factory reset is the only thing left that I can think of before requesting an exchange.
There doesn't seem to be much discussion here, but in one thread, a user mentioned that he can lightly drag his S-pen across the screen applying as little pressure as possible and the phone will recognize the input and scroll, draw, etc. On my S22U, that's definitely not the case. Much closer on the other two devices.
Anyone else who has used older devices as well as the S22U able to comment on sensitivity/pressure/input recognition? Cheers
Click to expand...
Click to collapse
I've had every Note since the Note 8, and my S22U SPen is just as sensitive as any prior Note devices. May be a hardware issue.

dismantelope said:
Just picked up an S22U, coming from a Note 10+. I've noticed I have to press significantly harder for the S-pen to register on the S22U than on the Note 10+ and Tab S7+. Drawing, scrolling, button presses, pretty much everywhere. S-Pen presses virtually never register when the pen is at an angle.
No case, no screen protector. I've disabled accidental touch protection and turned on the increased touch sensitivity. The hover function appears to work, I just have to press rather hard to press buttons/scroll/write in comparison to these older devices.
I've tried all 3 S-pens and can confirm they are not the issue. Also did the built-in S-pen reset. Verizon has disabled the #0# diagnostics tool, so I can't check anything there unfortunately. Factory reset is the only thing left that I can think of before requesting an exchange.
There doesn't seem to be much discussion here, but in one thread, a user mentioned that he can lightly drag his S-pen across the screen applying as little pressure as possible and the phone will recognize the input and scroll, draw, etc. On my S22U, that's definitely not the case. Much closer on the other two devices.
Anyone else who has used older devices as well as the S22U able to comment on sensitivity/pressure/input recognition? Cheers
Click to expand...
Click to collapse
I'm not experiencing any of the issues you described. It's possible that you have a defective digitizer. Did you get it new or used?
Boot into recovery mode and run the diagnostics. You can also run diagnostics via the Samsung Members app.

gernerttl said:
I'm not experiencing any of the issues you described. It's possible that you have a defective digitizer. Did you get it new or used?
Boot into recovery mode and run the diagnostics. You can also run diagnostics via the Samsung Members app.
Click to expand...
Click to collapse
Thank you, I'll give this a try. It's a new device. It works okay, I may not have noticed if it were my first note. But compared to the other two devices, it takes substantial pressure to register anything.

dismantelope said:
Thank you, I'll give this a try. It's a new device. It works okay, I may not have noticed if it were my first note. But compared to the other two devices, it takes substantial pressure to register anything.
Click to expand...
Click to collapse
No problem. I've owned Note phones and tablets previously. The Note 2, 8, and 10+; as well as the Tab S7 and Galaxy Note 10.1 tablet. The S22 Ultra's S Pen performance is the best of the bunch.

Posting an update in case it can be useful to someone in the future, as I only saw one other post anywhere discussing this subject. Running diagnostics showed that my S-pen and touch were normal. On top of the S-pen issue, several days into using the phone, all video recording became laggy. Playback of said videos had noticable stuttering. Tried several camera apps as well as resolutions, no difference.
I received a replacement from Verizon and all is well now. The S-pen sensitivity is no longer an issue and video recording is normal. I feel this replacement is a bit faster/snappier as well, something I didn't realize was an issue before as even the replaced device was faster than my old Note 10+.
As a side note, I switched from T-Mobile to Verizon for a trade-in deal. I am very disappointed in my billing ($20 more monthly than quoted) and the 5G speeds at my home and workplace (both in the middle of a city with great coverage) are much slower than the 4G T-Mobile Note 10+. The YouTube throttling is a real thing, though research tells me that running a VPN will address this. I test at 40mbps but can't stream 1080p, even at 2am on a weekday when there should be no congestion. I'm nowhere near my data limit. If anyone else is considering switching from T-Mobile to Verizon, I would urge you to ask friends/colleagues in your city for their experience.

Related

To the owners: is my s-pen malfunctioning?

Hi all,
I think my SGN 10.1 is a fine tablet, but I have an issue with the pen: it isn’t recognized when it makes very light contact with the screen. In particular, light fast clicks don’t register consistently. The nib is a little loose and clicks a little bit. When I press down on the screen just until the tip makes contact with the back-end, no response. I have to press just a little more for the touch to register.
Do you experience the same thing, do you think it’s normal behavior, or should I return it?
Did you try reseating the nib?
toenail_flicker said:
Did you try reseating the nib?
Click to expand...
Click to collapse
Yes, and I tried a different nib as well. So I guess you think I have a real issue? In your opinion, should the tablet react to the lightest touch or not?
I think the actual convenience of this pen is more sensitive than finger on SGN 10.1,even the original SGN.
donglepierre said:
Yes, and I tried a different nib as well. So I guess you think I have a real issue? In your opinion, should the tablet react to the lightest touch or not?
Click to expand...
Click to collapse
After reading your post, I can confirm that my one reacts in the same way after testing.
For me this is not an issue as I have no real need to touch and move the screen so lightly. Everything I have practically used it for has worked without any hiccups and I have been able to achieve the desired results such as flawless note taking, browsing with the pen, doodling now and again.
Which task will you perform that requires such sensitivity?
My only complaint is that when I write using the S-pen, I occasionally press the side button which I wish I could disable.
HasC said:
After reading your post, I can confirm that my one reacts in the same way after testing.
For me this is not an issue as I have no real need to touch and move the screen so lightly. Everything I have practically used it for has worked without any hiccups and I have been able to achieve the desired results such as flawless note taking, browsing with the pen, doodling now and again.
Which task will you perform that requires such sensitivity?
My only complaint is that when I write using the S-pen, I occasionally press the side button which I wish I could disable.
Click to expand...
Click to collapse
Thanks a lot for the info! The "issue" nags me in normal use, like clicking buttons and hyperlinks. I am a light-handed user, I like to click lightly and quickly. I also like the idea of not putting too much stress on the screen, fearing premature damage/scratching. But if everybody is on the same boat, I guess I will have to adjust, for everything else works fine, in particular the handwriting recognition which I find quite impressive IMO.
tonyleeloveyou said:
I think the actual convenience of this pen is more sensitive than finger on SGN 10.1,even the original SGN.
Click to expand...
Click to collapse
But how sensitive is your pen? Can you succesfully click on buttons and menus fast and with a very light touch consistently, or does it skip clicks like every five tries?
donglepierre said:
Thanks a lot for the info! The "issue" nags me in normal use, like clicking buttons and hyperlinks. I am a light-handed user, I like to click lightly and quickly. I also like the idea of not putting too much stress on the screen, fearing premature damage/scratching. But if everybody is on the same boat, I guess I will have to adjust, for everything else works fine, in particular the handwriting recognition which I find quite impressive IMO.
Click to expand...
Click to collapse
I wonder if there is a way to adjust screen sensitivity like in CM....
ngocdao said:
I wonder if there is a way to adjust screen sensitivity like in CM....
Click to expand...
Click to collapse
I think in my case, the problem is more “responsiveness” than “sensitivity”. The touch screen is responsive to the finger, not so much with the pen. And the sensitivity to pen pressure is very good. It’s just that the pressure threshold for the pen to be recognized is bit too high for my taste. I’d like the feedback of other users before considering replacing my unit.
donglepierre said:
But how sensitive is your pen? Can you succesfully click on buttons and menus fast and with a very light touch consistently, or does it skip clicks like every five tries?
Click to expand...
Click to collapse
Mine skips sometimes and is inconsistent as well. My Note phone behaves the same way.
donglepierre said:
Thanks a lot for the info! The "issue" nags me in normal use, like clicking buttons and hyperlinks. I am a light-handed user, I like to click lightly and quickly. I also like the idea of not putting too much stress on the screen, fearing premature damage/scratching. But if everybody is on the same boat, I guess I will have to adjust, for everything else works fine, in particular the handwriting recognition which I find quite impressive IMO.
Click to expand...
Click to collapse
I don't think there is any need to worry as Samsung would have carried out stress tests to an acceptable level to prevent scratches and breakage, it sounds like even when you adjust, you will probably use less pressure than me anyway, I am quite heavy handed.
I have been using the phone version of the Note for a while and have never had issues with scratches or breakage. I intend to use the Note as I would use pen on paper and if it cannot handle that then it is not worth the money that Samsung are charging for it and I will be the first to take it back if there were problems under the sales of good act we have here in the uk I.e. being fit for purpose, durable quality etc.
You may want to get a screen protector if you are still concerned.
If you draw a lot the spen imprints a lot of sgnote s/p. I have a really heavy hand and draw with immense pressure on both notes and they have yet to show any wear...
we don't see things as they are; we see things as we are.
donglepierre said:
Hi all,
I think my SGN 10.1 is a fine tablet, but I have an issue with the pen: it isn’t recognized when it makes very light contact with the screen. In particular, light fast clicks don’t register consistently. The nib is a little loose and clicks a little bit. When I press down on the screen just until the tip makes contact with the back-end, no response. I have to press just a little more for the touch to register.
Do you experience the same thing, do you think it’s normal behavior, or should I return it?
Click to expand...
Click to collapse
Yes, imho your pen /tab is malfunctioning. I've received my 2nd tab, which unlike the 1st one creaked on both sides *and* exhibited the same light touch pen behaviour problem. It was very frustrating to use. Other than some stutter the 1st tab works just fine. So, I decided to send the 2nd tab back due to 2 issues I mentioned earlier. Interestingly enough and going by the serial # the 2nd tab was from the earlier build.
I say get it exchanged if you can. Hth.
SM05 said:
I say get it exchanged if you can. Hth.
Click to expand...
Click to collapse
You just made things more difficult for me. Hmmm whom should I believe?... I don’t know lol
Life is short. If you're not happy, return it.
toenail_flicker said:
Life is short. If you're not happy, return it.
Click to expand...
Click to collapse
I’m happy. But I would be happier if I knew for sure that I could do better by replacing my Note. All things considered, I think I’ll keep it. I don’t think I’ll get an S-Pen without a little leeway in the nib (I had an Intuos 3, and I have vague memories of this).
Bamboo pen/tip design looks nothing like the spen
we don't see things as they are; we see things as we are.
For those interested, a related thread about the Wacom Intuos 4: http://forum.wacom.eu/viewtopic.php?f=2&t=993 (see the post by ivanzorkic)
That’s exactly what I needed to have confirmation on. So I’ll keep my Note as is, quality is good enough. Thanks everyone!
I'm having the same problem with my second Note 10.1. My first Note 10.1 (that was stolen) was bought in September. This one was bought a few days ago. It's different from my first one. The screen sticker has more logos such as DivX and ChatOn and is in colour as opposed to white only. The S Pen fits tightly in the slot and is hard to remove compared to the old one which was perfect and easier to remove. Light touches with the pen don't register making skips in the lines where I reduce pressure.
Could this be a manufacturing issue affecting the newer models? Should I exchange it or is there calibration I can do?

[SOLVED][Q] Any suggestions for wavy lines when drawing?

I have the Galaxy Tab 2 7.0, rooted with 4.0.4, and have not had any problems with it for the most part.
I recently downloaded Sketchbook Express to see how well the tablet could handle drawing. It handles it very well with one exception: the closer you get to drawing at a 45* angle, the more wavy the lines get. If I quickly swipe in that direction, it straightens out, but the slower I go, the more pronounced the waves or zig zags get. This happens using any of my fingers, the $20 Rocketfish stylus, and the $30 Wacom Bamboo stylus. All attempted on a freshly cleaned screen. I've also tried different apps with the same result. This guy had the same issue, as have others from what research I could pull up, but outside of unhelpful answers of "it's your stylus" (it's not), they all seem to have given up on getting help.
I've tried these apps on my friend's Evo 4G 3D, running Android 4.0.3, and had the same issue. I then tried on my rooted Xperia Play running Android 2.3.3 Gingerbread, and did not have this issue. I'm not entirely convinced it's an OS version that's making the difference, but I'm not able to find much information about the screens these devices use outside of "capacitive touch". I did learn that these screens use the corners to determine the location of input being received, so maybe moving directly in the direction of a corner is causing it to mess up?
Long story short, my questions are thus: is there any way to fix, calibrate, or compensate for this issue? Is it the screen, a hardware issue, or something else? Is there anything I can do?
Thanks for your time.
pWEN said:
I have the Galaxy Tab 2 7.0, rooted with 4.0.4, and have not had any problems with it for the most part.
I recently downloaded Sketchbook Express to see how well the tablet could handle drawing. It handles it very well with one exception: the closer you get to drawing at a 45* angle, the more wavy the lines get. If I quickly swipe in that direction, it straightens out, but the slower I go, the more pronounced the waves or zig zags get. This happens using any of my fingers, the $20 Rocketfish stylus, and the $30 Wacom Bamboo stylus. All attempted on a freshly cleaned screen. I've also tried different apps with the same result. This guy had the same issue, as have others from what research I could pull up, but outside of unhelpful answers of "it's your stylus" (it's not), they all seem to have given up on getting help.
I've tried these apps on my friend's Evo 4G 3D, running Android 4.0.3, and had the same issue. I then tried on my rooted Xperia Play running Android 2.3.3 Gingerbread, and did not have this issue. I'm not entirely convinced it's an OS version that's making the difference, but I'm not able to find much information about the screens these devices use outside of "capacitive touch". I did learn that these screens use the corners to determine the location of input being received, so maybe moving directly in the direction of a corner is causing it to mess up?
Long story short, my questions are thus: is there any way to fix, calibrate, or compensate for this issue? Is it the screen, a hardware issue, or something else? Is there anything I can do?
Thanks for your time.
Click to expand...
Click to collapse
The problem is the digitizer. It's cheap. I think all of the g tabs have this issue. Mine is terrible drawing diagonal lines and even scrolling in landscape mode is choppy. Only way around it from what I can tell is to apply more finger surface area. That seems to fix it. But since you're using a stylus that's not possible. If you find a solution to calibrate the digitizer, please let me know!
I have the same exact problem and the same exact request. There must be some option to increase sensitivity to at least minimize this effect. It's the only flaw I can find on this otherwise wonderful device.
And honestly, for the prize it cost, I would expect this not to exist. But... I have it now and would like to be able to use it in it's full extent and power.
dammit
Nice to know I'm not the only one who notice that, but it's crazy how my finger seems preciser than my pen and even more, that in my Galaxy S the pen works perfectly. I was so happy to use some drawing apps on the tab but when I tried...
I tried in my Tab 7 2, then I'll try on my uncle's 10.1 just to check.
hello all,
just to report the same issue. i have same problem with my samsung galaxy tab 2 7" like you all here. i get this problem since the first time i bought it (about a month ago). drawing the lines and reading in landscape mode is choppy :crying: same as MrHyde03 said. i have been tested my cousin's tablet to draw diagonal line for comparison, he has galaxy tab p1000. and the line result i get, though his tab has wavy line too, but mine has more wavy line than his tablet. i didn't noticed his tablet has so wavy line, just a little. i did it with my finger.
i hope this issue can be fixed later.
could be a solution
I don't know if it's just for marketing or what, but maybe the original Samsung stylus is better for these screens.
I wish someone could certify this...
I bave The Same Problem... Vawy diagonal and arcs. The same pens and fingers works fine on my Asus TF 101...
I have the same problem
gonzogonzo said:
I bave The Same Problem... Vawy diagonal and arcs. The same pens and fingers works fine on my Asus TF 101...
Click to expand...
Click to collapse
Hi guys, I have the same problem. Horrible response when i draw with a (cheap) stylus and perfect when i do it with my fingers. Has anyone tried adonit jot pro or Dagi ??? Maybe they increase the contact area and it solves the problem. If so, please tell us!!!
Thanks for reading and waiting for a solution.
I know this is an old post, but I can't just abandon my own thread! I've done quite a bit of research on this since making this post, and sadly, it's the way the screen is. Strange that my Xperia Play and Galaxy S3 phones can do this, but the Tab 2 was given such a cheap screen. I ended up selling it and putting the money towards a Note 10.1 with S-pen, which works as I would expect it to.

S Pen Calibration?

Hi,
I've found on my Note 10.1 that the accuracy of the S-Pen gets worse near the edges of the display. At the very edges it's off by about 1 mm or slightly more. I can't say it's really caused any problems but I'm wondering if this is normal and if there's any method to better calibrate it?
I've been having the same issue, or at least I noticed it recently...
Does anyone know anything about this problem?
This has been bothering me a lot lately, especially since i use my Note for note taking. Bump in case someone knows the solution.
Sent from my GT-N8013 using xda premium
Here's the response from Samsung support:
Thank you for contacting Samsung Customer Care.
We understand that while using the S pen near edges it looses accuracy.
We are sorry to hear that.
Please try replacing the S pen tip to isolate and fix the issue.
It is not possible to calibrate the digitizer.
Thank you for contacting Samsung.
Kind regards,
Steve
Samsung Customer Care
http://www.samsung.com/ca
The information was useful to me
Satisfied
5 4 3 2 1
Not Satisfied
* Please do not reply back to this email message as this email address is used for
outbound messages only.
* If you are not satisfied with the answer we provided, please click here
* if you have a question on another product, click here
I''''ve found the S-Pen (as viewed by enabling the hovering pointer) loses accuracy the closer to the edge of the screen the pen is used. At the edges it is off by at least 1 mm. About 1 cm in from the edges the accuracy is good.
Is this a defect in my unit or are they all like this? is there any way to recalibrate the digitizer to improve accuracy?
Click to expand...
Click to collapse
I tried changing the tip with both types of tips supplied with the tablet and as expected it had no effect. Note, also, how utterly useless Samsung email support is. The only way to reply is through a link which sends you to a contact form to submit a new email from scratch. There's no incident number or any way to establish continuity.
In any case, I happened to be at a Microsoft store yesterday and played a bit with Samsung's ACTIV (sp?) pro Windows 8 tablet which has the same s-pen as the Note 10.1. What I noticed immediately is it behaves exactly like my tablet: the digitizer loses accuracy both when tilting the pen and especially when the pen is near the edges of the display. The amount of inaccuracy is just about the same too, about 1 mm near the edge.
So I suspect this may be a limitation of the technology or at least the technology as it's being used by Samsung (I'm surprised Wacom's stuff is not more accurate). I'd be particularly interested if anyone is NOT seeing this.
It also seems silly that the display cannot be recalibrated or the driver does not support remapping. This seems like something that should be pretty easy to implement.
On the positive side, I can't say that I've experienced any real accuracy problems when in actual use. Probably I don't tend to write so close to the edge where it might be an issue. It's more an annoyance that the cursor doesn't quite match the tip. It's actually less annoying than having my hand trigger s-note's zoom or the notification drawer every time I try to write something.
Too bad, samsung support is horrible. For me this problem is pretty annoying since I tend to write until the VERY edge (just like I do in real paper), so I guess I'll have to change my habits lol.
P.S: It's good to know that is not my faulty tablet, but something "normal" in wacom devices...
nahuelarg86 said:
Too bad, samsung support is horrible. For me this problem is pretty annoying since I tend to write until the VERY edge (just like I do in real paper), so I guess I'll have to change my habits lol.
P.S: It's good to know that is not my faulty tablet, but something "normal" in wacom devices...
Click to expand...
Click to collapse
Yes, it is annoying. I wonder if there's any dev we can convince to write a remapping layer to fix this issue.
tmagritte said:
Here's the response from Samsung support:
I tried changing the tip with both types of tips supplied with the tablet and as expected it had no effect. Note, also, how utterly useless Samsung email support is. The only way to reply is through a link which sends you to a contact form to submit a new email from scratch. There's no incident number or any way to establish continuity.
In any case, I happened to be at a Microsoft store yesterday and played a bit with Samsung's ACTIV (sp?) pro Windows 8 tablet which has the same s-pen as the Note 10.1. What I noticed immediately is it behaves exactly like my tablet: the digitizer loses accuracy both when tilting the pen and especially when the pen is near the edges of the display. The amount of inaccuracy is just about the same too, about 1 mm near the edge.
So I suspect this may be a limitation of the technology or at least the technology as it's being used by Samsung (I'm surprised Wacom's stuff is not more accurate). I'd be particularly interested if anyone is NOT seeing this.
It also seems silly that the display cannot be recalibrated or the driver does not support remapping. This seems like something that should be pretty easy to implement.
On the positive side, I can't say that I've experienced any real accuracy problems when in actual use. Probably I don't tend to write so close to the edge where it might be an issue. It's more an annoyance that the cursor doesn't quite match the tip. It's actually less annoying than having my hand trigger s-note's zoom or the notification drawer every time I try to write something.
Click to expand...
Click to collapse
I wouldn't expect much help from a company that hires people who don't know the difference between "loses" and "looses". That's sad.
Sent from my GT-N8013 using xda app-developers app
Do you use magnet type cover? Try to remove it and see if the problem fixed
Sent from my GT-N8000 using xda premium
Hi to all. I am having a note 2, it has the same s pen as all the note series... i had that problem but it fixed when i did update! Try to go on developers options and check 'show pointer location' to check if the problem is the spen or the software.
I also notices that when used near the camera there is a great loss of accuracy .... and good to know that's not hte fault of my Note:good:
Scorpion_Ibm said:
I also notices that when used near the camera there is a great loss of accuracy .... and good to know that's not hte fault of my Note:good:
Click to expand...
Click to collapse
Mine just works fine, even on the ledges! Sometimes, but sometimes when the accelerometer is uncalibrated the S-Pen just stop responding well. I calibrate the accelerometer using this game https://play.google.com/store/apps/details?id=com.fgol.HungrySharkEvolution Just go on Options/Change to tilt control(If necessary)/Calibrate
It worked for me!
Post results!
kokero said:
Mine just works fine, even on the ledges! Sometimes, but sometimes when the accelerometer is uncalibrated the S-Pen just stop responding well. I calibrate the accelerometer using this game https://play.google.com/store/apps/details?id=com.fgol.HungrySharkEvolution Just go on Options/Change to tilt control(If necessary)/Calibrate
It worked for me!
Post results!
Click to expand...
Click to collapse
Thanks for trying to help .... the slight offset near the edges is no problem for me but i had a relatively bigger offset near the top (near the cameras) but that appeared to be due to the magnetic part in the book cover i had what an idiot .. i thought the camera had magnetic parts that do this and forgot the magnet of my book cover
So now what i really have is the offset near the edges
For me it's not an overall offset issue but just near the edges where it makes taking notes, sketching particularly difficult. It's very frustrating that these tablets aren't better calibrated out of box and provide no option for calibration. I'd be very surprised if this couldn't be fixed through software but would probably require support through the driver.
The other issue I have is that the drawing point only visually aligns with the tip of the pen when the pen is 90 degree from the tablet and you're looking straight down at it. Provided you hold the pen at a relatively steep angle and you angle the tablet so you're looking mostly down at it (say on your knee or a tilted stand) it's not bad. But once you deviate from that, say by putting the tablet flat on a table in front of you so you're looking at down at around 30 degrees, the deviation from where the tip appear to be and where the drawing point is becomes significant. I find this very frustrating. While I still prefer the s-pen to a passive capacitive pen, the fact I can't draw where I think I'm drawing makes it hard to work with. I've been using the tablet as my primary note taking device but I'm getting frustrated enough that I may go back to pen and paper and scanning.
It's probably not possible to fix this issue without hardware changes. Although multiple calibration profiles might reduce the effect.
I guess I'll have to wait for better hardware before I can finally live a paperless life...
tmagritte said:
For me it's not an overall offset issue but just near the edges where it makes taking notes, sketching particularly difficult. It's very frustrating that these tablets aren't better calibrated out of box and provide no option for calibration. I'd be very surprised if this couldn't be fixed through software but would probably require support through the driver.
The other issue I have is that the drawing point only visually aligns with the tip of the pen when the pen is 90 degree from the tablet and you're looking straight down at it. Provided you hold the pen at a relatively steep angle and you angle the tablet so you're looking mostly down at it (say on your knee or a tilted stand) it's not bad. But once you deviate from that, say by putting the tablet flat on a table in front of you so you're looking at down at around 30 degrees, the deviation from where the tip appear to be and where the drawing point is becomes significant. I find this very frustrating. While I still prefer the s-pen to a passive capacitive pen, the fact I can't draw where I think I'm drawing makes it hard to work with. I've been using the tablet as my primary note taking device but I'm getting frustrated enough that I may go back to pen and paper and scanning.
It's probably not possible to fix this issue without hardware changes. Although multiple calibration profiles might reduce the effect.
I guess I'll have to wait for better hardware before I can finally live a paperless life...
Click to expand...
Click to collapse
May be try this app with this kernel the post says that it can successfully reset the Spen callibration
Post with kernel: http://forum.xda-developers.com/showthread.php?t=2299406
App: https://play.google.com/store/apps/details?id=com.whitedavidp.reset.spen
It was the case
wiien said:
Do you use magnet type cover? Try to remove it and see if the problem fixed
Sent from my GT-N8000 using xda premium
Click to expand...
Click to collapse
That was it for me. The case was causing that. When I read your post I realized that my case has a keyboard and you can remove it. It stays in place with a magnet. So I removed it and it works as expected. so now I know to get it on the edges it's that. Thanks:good:

(Q) Bamboo Stylus Feel For Galaxy Note Series

Good evening guys.
Today I received my Bamboo Stylus Feel specially for the Note Series in the mail today. 48 bucks including taxes, shipping. However I read the instructions carefully but I encountered an issue. The pen does not have that instant response compared to the S Pen. With the Bamboo stylus, I have to press much harder on the screen in order to get it to do something.
Am I doing something wrong? Am I missing something? If this really the way the Bamboo stylus behaves? I would love the community's help on this regard because I am ready to return this pen. It has disapointed me.
Thanks.
Robles23 said:
Good evening guys.
Today I received my Bamboo Stylus Feel specially for the Note Series in the mail today. 48 bucks including taxes, shipping. However I read the instructions carefully but I encountered an issue. The pen does not have that instant response compared to the S Pen. With the Bamboo stylus, I have to press much harder on the screen in order to get it to do something.
Am I doing something wrong? Am I missing something? If this really the way the Bamboo stylus behaves? I would love the community's help on this regard because I am ready to return this pen. It has disapointed me.
Thanks.
Click to expand...
Click to collapse
I have one that I bought for the 10.1, and it works flawlessly for me. Never had a problem on my Note 2 either. Haven't tried it with my Note 4, though I would assume it works the same, unless it isn't updated to take advantage of the newer screen?
Robles23 said:
Good evening guys.
Today I received my Bamboo Stylus Feel specially for the Note Series in the mail today. 48 bucks including taxes, shipping. However I read the instructions carefully but I encountered an issue. The pen does not have that instant response compared to the S Pen. With the Bamboo stylus, I have to press much harder on the screen in order to get it to do something.
Am I doing something wrong? Am I missing something? If this really the way the Bamboo stylus behaves? I would love the community's help on this regard because I am ready to return this pen. It has disapointed me.
Thanks.
Click to expand...
Click to collapse
I could be wrong but you might need to recalibrate the stylus for the Note 4. Google can help or someone might be able to add details or correct me
sefrcoko said:
I could be wrong but you might need to recalibrate the stylus for the Note 4. Google can help or someone might be able to add details or correct me
Click to expand...
Click to collapse
Thank you guys for your responses. I will do some research in case i have to recalibrate the stylus. But like I said, it's very weird.. Because i have to press really hard on the screen to get it to do the desired action. If someone else has anything to add please contribute to this thread, otherwise I will report back here if I find any info on the Internet.
Sokudoningyou said:
I have one that I bought for the 10.1, and it works flawlessly for me. Never had a problem on my Note 2 either. Haven't tried it with my Note 4, though I would assume it works the same, unless it isn't updated to take advantage of the newer screen?
Click to expand...
Click to collapse
The product page for the Bamboo Stylus Feel for Note Series has the Note 4 as a tested and compatible device.
Have you contacted Wacom? (Or Bamboo or whoever... I forget who the company is right now)
Sent from my Samsung Galaxy Note 4 (sm-910a) using Tapatalk
I have this pen and use it with no issues.
I don't have that pen specifically, but I do have a couple of frequency-compatible Tablet PC pens.
There are three things I've noted when using them on the Note 4:
-The calibration is off, way off, and I can't just recalibrate it like I can a tablet PC or even the tablet-size Galaxy Note products.
-Tilt sensitivity works on the tablet PC pens. Good luck taking advantage of that with the amount of cursor shift you'll have, though.
-The first 20-25% of the pressure sensitivity curve, as measured in Clover Paint settings, is effectively wasted on the stock S-Pen. The pressure value just skips from zero right into that range, then ramps up like you'd expect. None of my Tablet PC pens do this; they start from 0% at initial activation force like you'd think they would.
That last point is probably why you have to bear down so hard with the Bamboo Stylus to get it to work like it's supposed to. Too bad Samsung doesn't just give us a proper settings panel like Wacom does on a proper computer.
I am getting my own pen in the mail soon as well
I hope that things will work well
I wonder if changing ROM's would help with the Bamboo pen performance.

Screen sensitivity problem. Curved screen

I'm using "note 10 pro".
Nice device.
However, there is a "sensitivity problem" on the curved screen edges.
There are problems with the letters on the left and right sides of the keyboard.
Need to touch hard. Need to apply pressure.
There may be a software error.
Or they willingly reduced sensitivity.
How do I solve?
The edge of my screen where it starts to curve is not sensitive enough. The "1" and "0" and "a" and "p" keyboard keys are very difficult to press. I end up having to turn the phone side-ways so the screen flips making the keyboard position entirely on the flat part and not hitting the curved edge. This is very very frustrating to the point where I'm changing all passwords to not use any of those keys. Doesn't help much but a little. The phone got such great reviews but I find it very difficult to use because of the lack of sensitivity on the edges.
I don't have this issues with my 10pro. Maybe it's a broken device.
Gesendet von meinem Redmi Note 4 mit Tapatalk
Examine more carefully.
Touch the keyboard keys 10 times again in a row.
Tap hard. then soft tap.
You will notice.
Have absolutely no touch issue on my device. Zero. And I am very sensitive about things like that. I even use a UV Glue glass for it that I bought off ebay. (was bit messy to apply but I was prepared after using Whitestone glasses elsewhere.)
Aaanyhow. My device has superb sensitivity even with glass. IMO you have a faulty device.
I have also tried on different devices. they deliberately reduced the touch sensitivity on the rounded edges.
Please see in detail.
understand what I want to say.
I don't have a problem either.
I've tried it on 4 different devices.
sample:
Samsung has increased the sensitivity on the curved screen.
But it has developed a setting program for users.
xioami decreased sensitivity.
https://www.youtube.com/watch?v=Vg3s7DqNS6A
I hope it is corrected
https://c.mi.com/forum.php?mod=viewthread&tid=2819123&page=1&extra=#pid13776207
gokmenm said:
I hope it is corrected
https://c.mi.com/forum.php?mod=viewthread&tid=2819123&page=1&extra=#pid13776207
Click to expand...
Click to collapse
Really don't know mate. Never had any touch issues out of the box with the stock firmware.
Nor had any touch issues on my OnePlus 7 Pro. Nor on my GF's Note 9. Nor on her Note 10 Plus. Nor on my mother's S7 Edge.
I don't know. Maybe you have huge hands?
Ps.: I get it that YOU have a problem. All I am trying to say is ... the phone itself works perfectly. Without any touch issues. It's either you, or your device.
h8Aramex said:
Really don't know mate. Never had any touch issues out of the box with the stock firmware.
Nor had any touch issues on my OnePlus 7 Pro. Nor on my GF's Note 9. Nor on her Note 10 Plus. Nor on my mother's S7 Edge.
I don't know. Maybe you have huge hands?
Ps.: I get it that YOU have a problem. All I am trying to say is ... the phone itself works perfectly. Without any touch issues. It's either you, or your device.
Click to expand...
Click to collapse
my hands are not big
try touching the edges lightly and gently.
then tap the middle keys lightly.
You will notice.
h8Aramex said:
... Never had any touch issues out of the box with the stock firmware.
... Nor on her Note 10 Plus. Nor on my mother's S7 Edge. ...
Click to expand...
Click to collapse
Hi, I don't know about the Mi Note 10 yet, but I definitely had a similar issue with the Galaxy S7 back in the day. It used to drive me crazy, because it happened while holding it with one hand in the car, and typing the number "1" for example was often hit or miss (I am right handed, normal hands). It's part of why I don't like curved screens and why I never bought another Samsung phone (I know Samsung mostly fixed the issue through updates).
I just ordered the Mi Note 10 despite of the curved screen, because of the camera. I didn't want to buy a phone from Hauwei and didn't want to wait for Samsung's S20, and the Mi Note 10 is at a killer price
Anyway, I hope I don't run into the same curve issue (worried).
gokmenm said:
I'm using "note 10 pro".
Nice device.
However, there is a "sensitivity problem" on the curved screen edges.
There are problems with the letters on the left and right sides of the keyboard.
Need to touch hard. Need to apply pressure.
There may be a software error.
Or they willingly reduced sensitivity.
How do I solve?
Click to expand...
Click to collapse
I have no such issues.... The curve screen is more like edge.
And I am using Gboard as my keyboard and all the keys are working fine.
there is problem. make a very delicate soft touch.
Just touch the edge. tap very slowly.
also tap the middle of the screen.
there is a serious difference.
https://www.reddit.com/r/Xiaomi/comments/enp898/touch_delay_on_the_borders_of_redmi_note_8_part_2/
https://www.reddit.com/r/Xiaomi/comments/eqarbe/solution_screen_border_delay_problem/
https://www.reddit.com/r/Xiaomi/comments/eqxtjx/note_10_screen_edge_sensitivity_very_little/
I am noticing a sensitivity issue with "p"/"0" on the upper right.
It doesn't register a light touch, it needs to be pressed deliberately and slower.
It's part of the reason I don't love curved edges.
truffle1234 said:
I have no such issues.... The curve screen is more like edge.
And I am using Gboard as my keyboard and all the keys are working fine.
Click to expand...
Click to collapse
Same. Oh well, maybe SOME phones don't work that well?
Honestly I'd prefer NO curve, but I can't find an issue with it.
I hate MIUI way more that I can't make it allow my bloody notifications in DND. It's like the worst nightmare ever.
I have mi & galaxy s9+, both phone have same issue.
Samsung have a official app to fix this issue, but Mi not.
At first I try use 3rd App the disable edge touch,, but not useful like Samsung.
Now I just use a new case. The case just let my plam not possible touch on curve edge.
I recorded a sample video. We can add some programs with Turbo Game setting. We increase sensitivity. But it is not enough. We cannot select every program. Even if it is selected, it is not enough. The problem continues on the edges.
It seems to prove that this problem is a software problem.
There should be a "disable screen sensitivity limitation" button in settings
https://www.youtube.com/watch?v=v8yU614UYSg&feature=emb_title
https://www.youtube.com/watch?v=wegoCOlDxso
please watch this video. Ad-free. I'm not youtuber
There are problems with letters on the left and right side of the keyboard.
It is necessary to touch hard. It is necessary to apply pressure.
There may be a software error or willfully reduced the sensitivity.
does not want the edges to be very sensitive xiaomi. And they took a stupid measure with the software.
xda developers can solve this problem.
Then xioami takes precautions.
The problems at the lower corners are caused by the gesture control. Turn off the gesture control and use the conventional buttons, then the problem is solved.
This is also the reason why some have the problem and some don't. Not everyone uses the gesture control.
i have also noticed a reduced sensitivity with the gesture control. As soon as you switch to the buttons everything is fine with the touch screen test.
I use the buttons.
There is problem. Use as you wish There is a problem with the edges and bottom corners.
The only method: an update.
Install the program I sent. try it too.
the center and edges of the screen and the bottom corners are different.
This problem bothers me on the keyboard.
https://play.google.com/store/apps/details?id=jp.rallwell.siriuth.touchscreentest&hl=tr
I can reproduce the interrupted line test.
In the test i can place white dots on every part of the edge, but it gets only interrupted when drawing a line.
But it doesn't bother me when keyboard typing.
Keyboard works well even in the edges.
Do you use swipe typing, i'm not?
I'm using Fullscreen Gestures and never noticed any problems with edge sensitivity.
My device is Global Firmware (11.0.7), not Global EEA.

Categories

Resources