Hi all,
I think my SGN 10.1 is a fine tablet, but I have an issue with the pen: it isn’t recognized when it makes very light contact with the screen. In particular, light fast clicks don’t register consistently. The nib is a little loose and clicks a little bit. When I press down on the screen just until the tip makes contact with the back-end, no response. I have to press just a little more for the touch to register.
Do you experience the same thing, do you think it’s normal behavior, or should I return it?
Did you try reseating the nib?
toenail_flicker said:
Did you try reseating the nib?
Click to expand...
Click to collapse
Yes, and I tried a different nib as well. So I guess you think I have a real issue? In your opinion, should the tablet react to the lightest touch or not?
I think the actual convenience of this pen is more sensitive than finger on SGN 10.1,even the original SGN.
donglepierre said:
Yes, and I tried a different nib as well. So I guess you think I have a real issue? In your opinion, should the tablet react to the lightest touch or not?
Click to expand...
Click to collapse
After reading your post, I can confirm that my one reacts in the same way after testing.
For me this is not an issue as I have no real need to touch and move the screen so lightly. Everything I have practically used it for has worked without any hiccups and I have been able to achieve the desired results such as flawless note taking, browsing with the pen, doodling now and again.
Which task will you perform that requires such sensitivity?
My only complaint is that when I write using the S-pen, I occasionally press the side button which I wish I could disable.
HasC said:
After reading your post, I can confirm that my one reacts in the same way after testing.
For me this is not an issue as I have no real need to touch and move the screen so lightly. Everything I have practically used it for has worked without any hiccups and I have been able to achieve the desired results such as flawless note taking, browsing with the pen, doodling now and again.
Which task will you perform that requires such sensitivity?
My only complaint is that when I write using the S-pen, I occasionally press the side button which I wish I could disable.
Click to expand...
Click to collapse
Thanks a lot for the info! The "issue" nags me in normal use, like clicking buttons and hyperlinks. I am a light-handed user, I like to click lightly and quickly. I also like the idea of not putting too much stress on the screen, fearing premature damage/scratching. But if everybody is on the same boat, I guess I will have to adjust, for everything else works fine, in particular the handwriting recognition which I find quite impressive IMO.
tonyleeloveyou said:
I think the actual convenience of this pen is more sensitive than finger on SGN 10.1,even the original SGN.
Click to expand...
Click to collapse
But how sensitive is your pen? Can you succesfully click on buttons and menus fast and with a very light touch consistently, or does it skip clicks like every five tries?
donglepierre said:
Thanks a lot for the info! The "issue" nags me in normal use, like clicking buttons and hyperlinks. I am a light-handed user, I like to click lightly and quickly. I also like the idea of not putting too much stress on the screen, fearing premature damage/scratching. But if everybody is on the same boat, I guess I will have to adjust, for everything else works fine, in particular the handwriting recognition which I find quite impressive IMO.
Click to expand...
Click to collapse
I wonder if there is a way to adjust screen sensitivity like in CM....
ngocdao said:
I wonder if there is a way to adjust screen sensitivity like in CM....
Click to expand...
Click to collapse
I think in my case, the problem is more “responsiveness” than “sensitivity”. The touch screen is responsive to the finger, not so much with the pen. And the sensitivity to pen pressure is very good. It’s just that the pressure threshold for the pen to be recognized is bit too high for my taste. I’d like the feedback of other users before considering replacing my unit.
donglepierre said:
But how sensitive is your pen? Can you succesfully click on buttons and menus fast and with a very light touch consistently, or does it skip clicks like every five tries?
Click to expand...
Click to collapse
Mine skips sometimes and is inconsistent as well. My Note phone behaves the same way.
donglepierre said:
Thanks a lot for the info! The "issue" nags me in normal use, like clicking buttons and hyperlinks. I am a light-handed user, I like to click lightly and quickly. I also like the idea of not putting too much stress on the screen, fearing premature damage/scratching. But if everybody is on the same boat, I guess I will have to adjust, for everything else works fine, in particular the handwriting recognition which I find quite impressive IMO.
Click to expand...
Click to collapse
I don't think there is any need to worry as Samsung would have carried out stress tests to an acceptable level to prevent scratches and breakage, it sounds like even when you adjust, you will probably use less pressure than me anyway, I am quite heavy handed.
I have been using the phone version of the Note for a while and have never had issues with scratches or breakage. I intend to use the Note as I would use pen on paper and if it cannot handle that then it is not worth the money that Samsung are charging for it and I will be the first to take it back if there were problems under the sales of good act we have here in the uk I.e. being fit for purpose, durable quality etc.
You may want to get a screen protector if you are still concerned.
If you draw a lot the spen imprints a lot of sgnote s/p. I have a really heavy hand and draw with immense pressure on both notes and they have yet to show any wear...
we don't see things as they are; we see things as we are.
donglepierre said:
Hi all,
I think my SGN 10.1 is a fine tablet, but I have an issue with the pen: it isn’t recognized when it makes very light contact with the screen. In particular, light fast clicks don’t register consistently. The nib is a little loose and clicks a little bit. When I press down on the screen just until the tip makes contact with the back-end, no response. I have to press just a little more for the touch to register.
Do you experience the same thing, do you think it’s normal behavior, or should I return it?
Click to expand...
Click to collapse
Yes, imho your pen /tab is malfunctioning. I've received my 2nd tab, which unlike the 1st one creaked on both sides *and* exhibited the same light touch pen behaviour problem. It was very frustrating to use. Other than some stutter the 1st tab works just fine. So, I decided to send the 2nd tab back due to 2 issues I mentioned earlier. Interestingly enough and going by the serial # the 2nd tab was from the earlier build.
I say get it exchanged if you can. Hth.
SM05 said:
I say get it exchanged if you can. Hth.
Click to expand...
Click to collapse
You just made things more difficult for me. Hmmm whom should I believe?... I don’t know lol
Life is short. If you're not happy, return it.
toenail_flicker said:
Life is short. If you're not happy, return it.
Click to expand...
Click to collapse
I’m happy. But I would be happier if I knew for sure that I could do better by replacing my Note. All things considered, I think I’ll keep it. I don’t think I’ll get an S-Pen without a little leeway in the nib (I had an Intuos 3, and I have vague memories of this).
Bamboo pen/tip design looks nothing like the spen
we don't see things as they are; we see things as we are.
For those interested, a related thread about the Wacom Intuos 4: http://forum.wacom.eu/viewtopic.php?f=2&t=993 (see the post by ivanzorkic)
That’s exactly what I needed to have confirmation on. So I’ll keep my Note as is, quality is good enough. Thanks everyone!
I'm having the same problem with my second Note 10.1. My first Note 10.1 (that was stolen) was bought in September. This one was bought a few days ago. It's different from my first one. The screen sticker has more logos such as DivX and ChatOn and is in colour as opposed to white only. The S Pen fits tightly in the slot and is hard to remove compared to the old one which was perfect and easier to remove. Light touches with the pen don't register making skips in the lines where I reduce pressure.
Could this be a manufacturing issue affecting the newer models? Should I exchange it or is there calibration I can do?
Related
So I was thinking about the issue of palm wrap. I think the implementation of it would be fairly simple. This would probably require root access, but I digress.
You would basically disregard any input happening within 1/8" - 1/4" on the border of the screen. Well not any inputs, but any prolonged inputs. Like the inputs that happen when your fingers hang off the edge of the screen, or the palm of your hand grazing the screen when you try to press something with your thumb.
There are very few programs that use the full screen, especially near the edges. If there are it would just be a matter of putting the anti-registration on hold when the app is in the foreground.
You could even create a setting for "fat" fingers and "slim" fingers. The fatter the finger, the further out you would disregard inputs from there.
The caveat being that you have to have it running on the system level. Now that google has finally added multi touch support on their apps, I wouldn't be surprised if you have access to input information on the system level.
(I know jack about making programs on adroid, but the rum is helping my mind think)
What do you guys think?
I haven't had palm wrap problems since I bought my seidio innocase. Adds a little beef to the unit as a whole (just a little, nothing major) but keeps my palm off the edges of the screen.
i like this idea simply because I do not want to buy any sort of case for the phone
Good idea my friend.
Just out of curiosity, does everyone here hold there phone in one hand and use the other to input anything? Because I can't see any palmwrap problem unless I do this.
I almost exclusively use my nexus with one hand doing inputs with my thumb if I'm not in landscape mode and I've never had any problems with palm wrap (I might be misunderstanding the concept completely though, so feel free to correct me).
I guess it depends on the length of your fingers the base of my thumb is what mostly affects one handed use for me.
JHaste said:
i like this idea simply because I do not want to buy any sort of case for the phone
Click to expand...
Click to collapse
[off-topic] That is 'not' a good road to follow...get one of the soft cases or atleast the skins that you dont even notice it (personally I bought THIS and its amazing, has amazing 'grip' and it fits perfectly, unnoticeable).
[/off-topic]
I dont seem to have this problem either. But it could be helpful to others with bigger hands maybe?
I have this problem sometimes and it is annoying as heck. I don't even think you need to go to all that trouble to fix it. I think just enabling multitouch on the dexktop might fix it. Don't know how difficult that would be though.
Hey is anyone elses GTab's touch sensitivity kind of off?
I noticed, compared to the iPad and Galaxy Tab, some times it takes me 2-4x of tryinng to press something to get it going.
Its almost like the screen cant pick it up sometimes. And sometimes when scrolling, it selects things, when im just Trying to scroll..
Also the top left HOME button on screen is always iffy, most times ill need 2-4 more times 2 press it to get it going.
I am using TNT 2.2.
Anyone else noticed this? i feel like its hardware.
Definetely not as responsive as my EVO. Maybe its the cheap screen. I wish it could be fixed via software, but fat chance. I guess not all capacitive screens are created equal.
supanatuwral said:
Definetely not as responsive as my EVO. Maybe its the cheap screen. I wish it could be fixed via software, but fat chance. I guess not all capacitive screens are created equal.
Click to expand...
Click to collapse
You nailed it. IMO Samsung has been making the best color screens for years.
Have had absolutely no problems with touchpad responsiveness from my gTab... Just as sensitive and responsive as my Dinc.
Really does seem like this hardware is hit or miss... Some tabs have no issues some have many.
You guys are just plain spoiled. I've gone through Palm IIIx to now the gTablet, and it just simply has the most responsive touch screen that I've ever used, but I've had recent experience with the dreadful Augen GT and the slightly less dreadful White Pandigital Novel, both of which had worse touch screens than other devices that I've used.
One thing that I do, do for the gTab though is to clean the screen quite a bit. At a minimum I do so before every use as I find the fingerprint/body oils buildup to be annoying in fairly short order and it might have some impact on touch responsiveness. It's the worst fingerprint magnet that I've ever seen actually...
No issues here with single touch sensitivity, pretty good on that. Just as good as my Nexus One. Multitouch and pinch-to-zoom still a bit flaky. I am hopeful that will be resolved by software and/or driver improvements, as it was on the Nexus One.
The only issues I have are when the screen is too dirty or too clean. When I really scrub and clean the glass off entirely, at first it's a bit too "sticky" almost when my finger contacts it - maybe that's because it's winter here in the Northeast and my skin is dry. Once I've used it a bit and it gets some finger grease on it, it works perfectly. But if it gets grit or solid dirt on it, that can definitely interfere with the touch screen too, as with any capacitive screen.
I suspect the optimal thing would be a really good screen protector that's easy to clean and has that smooth finger contact feeling out of the box, like the iPad's glass does, for example, which I think has something to do with the oleophobic coating.
Typing this on my gtablet. The issue for me is the keyboard. There are parts of the screen that are unresoonsive making some letters not get tapped. The A key and l keys in particular. As a result I can't type smoothly or naturally because I will make several errors along the way. This does not happen onky iphone or my wires ipad.
it might bemy rrleason for sending it back as it takes too ongoing totyr correctly and I get tire d of all the corrections.
Well if your using the stock tnt keyboard, it sucks. We can learn from the ipad, with the size of the screen it has huge keys that cover a lot more of the screen then our stock tnt keyboard. I use smart keyboard pro with the key heights set to maximum and it works so much better, like 100x better. Even has voice to text.
Can people check their keyboard? I find that if I type most of the keys they type fine. However, the letter a key seems to only work when pressed offcenter which prevents. From typing properly as I must deliberately slow down and make sure it is correctly typed otherwise I get many errors. Could this be a defect in my screen?
Or is this a ui problem with tnt?
This could be a deal breaker as I misspelled every word if. Has h letter A
Letter A
I have the same problem with the letter A, and sometimes P. Otherwise touch is great
Figured why this tablet is driving me nuts. There are two dead zones on this tablet. Someone please do this test so I can figure out if this is just my tablet or all g tablets.
Download mulitouch vis test. Do rapid light touches in the area where the 'a' key is and delete key are. If I do this test in the middle of the screen it registers every single tap. But in those two areas I can sometimes tap 10 times in a row and not have a single tap register.
If this all g tablets then I think it's going back.
Also is there a keyboard with arrow keys? Trying to place the cursor can be a real pain.
Agreed bout the dead spots. The stock tap n tap western keyboard seems tominimize them due to the angles but if I try another keyboard I miss the a and the return button all the time
Stocklone said:
Figured why this tablet is driving me nuts. There are two dead zones on this tablet. Someone please do this test so I can figure out if this is just my tablet or all g tablets.
Download mulitouch vis test. Do rapid light touches in the area where the 'a' key is and delete key are. If I do this test in the middle of the screen it registers every single tap. But in those two areas I can sometimes tap 10 times in a row and not have a single tap register.
If this all g tablets then I think it's going back.
Also is there a keyboard with arrow keys? Trying to place the cursor can be a real pain.
Click to expand...
Click to collapse
Downloaded the app as well because I, too, am having the same screen non-responsiveness issue. Lo and behold the area where the "L" key is is a pretty dead spot. It would register about 40% of the quick taps I did in that area. Is this is a software issue? If so, I can live with it and hope our wonderful devs release a software build that resolves this otherwise, this thing may be going back because it's driving me up the wall!
I do see the occasional missed tap here and there, but no consistent dead areas that I've noticed (the A and L buttons on keyboard seem fine to me).
Multitouch sensitivity is wayyyyy mis-calibrated though - you have to use very heavy finger presses to get multitouch to register. This is some sort of driver or calibration issue that should be easily solved.
I found a binary called TSCalibration in the /system/bin directory on my VEGAn ROM G Tablet. Tried running it from terminal, but it seems to be looking for a calibration.ini file on the SDCard. I'd be willing to bet we could figure out how to fix some of the touchscreen issues with some work, because I suspect they are principally software related.
If your issues with the touchscreen are anything like this...exchange it...
My new one requires very little effort if any at all to get the screen to respond...
However, if you're talking about the once in a while miss of a touch...yes, I agree with cutterjohn....you're spoiled. Return the device asap, so I could pick it up from an outlet...please?
RavenII said:
If your issues with the touchscreen are anything like ...exchange it...
My new one requires very little effort if any at all to get the screen to respond...
However, if you're talking about the once in a while miss of a touch...yes, I agree with cutterjohn....you're spoiled. Return the device asap, so I could pick it up from an outlet...please?
Click to expand...
Click to collapse
There is a big difference between these dead spots and the occasional miss. I have no problem with the occasional miss. I just have to adjust to how my finger touches the tablet to get more consistent hits.
There are areas of my tablet that consistently do not behave like the other areas. Does that sound normal to you? I can't have a tablet where anything in the 2 corners is extremely inconsistent. If I have the tablet oriented a certain way the soft-buttons get put into one of the bad corners and that is really frustrating.
I don't think it is how I am holding it because the problem follows the physical corners and it is not relative to my hand. So that rules that out. And I washed my hands and gave the tablet a good cleaning so dirt/grease/grime is not an issue either. It could have been too clean but why only two corners?
I have many weeks to go on my 30 days so I will keep screwing with it to see if I can come up with anything that is a workaround or explains why it is happening. It is insanely fast and it's modding future looks extremely bright with such talented people. If I get fed up enough, I'll exchange it and hopefully get one with a even touch response for the whole screen or simply return it and wait a couple more months for Honeycomb tablets.
RavenII said:
If your issues with the touchscreen are anything like this...exchange it...
My new one requires very little effort if any at all to get the screen to respond...
However, if you're talking about the once in a while miss of a touch...yes, I agree with cutterjohn....you're spoiled. Return the device asap, so I could pick it up from an outlet...please?
Click to expand...
Click to collapse
Whoa. That video was pretty bad. While mine is not like that (thank God), I just tried hitting the app drawer key and it only registered after the 13th tap?!?! seriously wtf. While it isn't a "dead zone" per se, that's still pretty bad. There has to be a software fix to recify this issue with the right side of the screen. (my "L" and "delete" button are pretty bad as well).
THAT is a defective product...
I'll do another video to compare with my new one...WITH funky assed salty sweat all over the screen. Works flawlessly...
Is your model that is working well running stock firmware and keyboard?
mine is tent lite and the stock keyboard is ok. It if I try to use the alternative keyboards then I get consistent misses on key presses especially on the letter a.
I'm always tapping *constantly*, like 10-20 times on certain spots around the corners and edges of the screen, I'm about to return mine because of this.. Believe I'm still in the 2 weeks with office depot, will have to go snag the $350 one over at sears and hopefully it will come with a screen protector this time (this one I have didn't come with one, wonder if that has to do with the dead spots)..
I use a ZooGue stylus with my Galaxy Tab 8.9 (Stock, non-rooted) and it works GREAT for drawing.
I recently purchased a Tab 2 7.0 (P3113) for my wife (she likes the smaller form factor) but when attempting to draw using multiple drawing apps it is extremely choppy. When using my finger it seems to be better, but she really wants to use a stylus. I've looked thru the settings and can't find anything that would make a difference. I've also looked thru the forums here at xda and can't find anyone that has posted anything similar.
Has anyone else experienced the same and if so is there a way to fix this problem?
Thanks for any insight that could be given!
~John
I think I've run into what you are talking about. I can't draw straight lines with a stylus. when I try to draw a line, the screen registers it as a zig zag. I'm not sure if this is what you mean by "choppy." I can draw lines fine with my finger.
I noticed that it's near impossible to draw in SketchUp - it takes 1/3 to 1/2 second for the lines to catch up to my finger.
I assumed it was just the compromise you make with buying a low-end tablet. I'd love to hear that it isn't!
xreflection said:
I think I've run into what you are talking about. I can't draw straight lines with a stylus. when I try to draw a line, the screen registers it as a zig zag. I'm not sure if this is what you mean by "choppy." I can draw lines fine with my finger.
Click to expand...
Click to collapse
Yes, that's part, as well as attempting to draw small circles/curves either skips or shows as a straight(ish) line. Hopefully a solution can be found soon otherwise this one is going back.
Indeed.
I noticed this issue from day one since the first thing I did was play Draw Something. No matter the app, swiping your finger in a slow and steady manner will help notice the stutters/lag.
I also attempted to use a stylus because I thought there was some sort of weird calibration issue, but to my surprise, it got even worse. The strange zig-zag phenomenon appeared, making it impossible to draw anything. Even though it's only noticeable when you drag/swipe/draw something, it's annoying as heck. Hell, I even recently found a dead pixel in the middle of the screen, adding up to the annoyance factor.
Still got like 1-2 weeks available to return it to Best Buy, and I'm not sure what to do...
Hi,
I've found on my Note 10.1 that the accuracy of the S-Pen gets worse near the edges of the display. At the very edges it's off by about 1 mm or slightly more. I can't say it's really caused any problems but I'm wondering if this is normal and if there's any method to better calibrate it?
I've been having the same issue, or at least I noticed it recently...
Does anyone know anything about this problem?
This has been bothering me a lot lately, especially since i use my Note for note taking. Bump in case someone knows the solution.
Sent from my GT-N8013 using xda premium
Here's the response from Samsung support:
Thank you for contacting Samsung Customer Care.
We understand that while using the S pen near edges it looses accuracy.
We are sorry to hear that.
Please try replacing the S pen tip to isolate and fix the issue.
It is not possible to calibrate the digitizer.
Thank you for contacting Samsung.
Kind regards,
Steve
Samsung Customer Care
http://www.samsung.com/ca
The information was useful to me
Satisfied
5 4 3 2 1
Not Satisfied
* Please do not reply back to this email message as this email address is used for
outbound messages only.
* If you are not satisfied with the answer we provided, please click here
* if you have a question on another product, click here
I''''ve found the S-Pen (as viewed by enabling the hovering pointer) loses accuracy the closer to the edge of the screen the pen is used. At the edges it is off by at least 1 mm. About 1 cm in from the edges the accuracy is good.
Is this a defect in my unit or are they all like this? is there any way to recalibrate the digitizer to improve accuracy?
Click to expand...
Click to collapse
I tried changing the tip with both types of tips supplied with the tablet and as expected it had no effect. Note, also, how utterly useless Samsung email support is. The only way to reply is through a link which sends you to a contact form to submit a new email from scratch. There's no incident number or any way to establish continuity.
In any case, I happened to be at a Microsoft store yesterday and played a bit with Samsung's ACTIV (sp?) pro Windows 8 tablet which has the same s-pen as the Note 10.1. What I noticed immediately is it behaves exactly like my tablet: the digitizer loses accuracy both when tilting the pen and especially when the pen is near the edges of the display. The amount of inaccuracy is just about the same too, about 1 mm near the edge.
So I suspect this may be a limitation of the technology or at least the technology as it's being used by Samsung (I'm surprised Wacom's stuff is not more accurate). I'd be particularly interested if anyone is NOT seeing this.
It also seems silly that the display cannot be recalibrated or the driver does not support remapping. This seems like something that should be pretty easy to implement.
On the positive side, I can't say that I've experienced any real accuracy problems when in actual use. Probably I don't tend to write so close to the edge where it might be an issue. It's more an annoyance that the cursor doesn't quite match the tip. It's actually less annoying than having my hand trigger s-note's zoom or the notification drawer every time I try to write something.
Too bad, samsung support is horrible. For me this problem is pretty annoying since I tend to write until the VERY edge (just like I do in real paper), so I guess I'll have to change my habits lol.
P.S: It's good to know that is not my faulty tablet, but something "normal" in wacom devices...
nahuelarg86 said:
Too bad, samsung support is horrible. For me this problem is pretty annoying since I tend to write until the VERY edge (just like I do in real paper), so I guess I'll have to change my habits lol.
P.S: It's good to know that is not my faulty tablet, but something "normal" in wacom devices...
Click to expand...
Click to collapse
Yes, it is annoying. I wonder if there's any dev we can convince to write a remapping layer to fix this issue.
tmagritte said:
Here's the response from Samsung support:
I tried changing the tip with both types of tips supplied with the tablet and as expected it had no effect. Note, also, how utterly useless Samsung email support is. The only way to reply is through a link which sends you to a contact form to submit a new email from scratch. There's no incident number or any way to establish continuity.
In any case, I happened to be at a Microsoft store yesterday and played a bit with Samsung's ACTIV (sp?) pro Windows 8 tablet which has the same s-pen as the Note 10.1. What I noticed immediately is it behaves exactly like my tablet: the digitizer loses accuracy both when tilting the pen and especially when the pen is near the edges of the display. The amount of inaccuracy is just about the same too, about 1 mm near the edge.
So I suspect this may be a limitation of the technology or at least the technology as it's being used by Samsung (I'm surprised Wacom's stuff is not more accurate). I'd be particularly interested if anyone is NOT seeing this.
It also seems silly that the display cannot be recalibrated or the driver does not support remapping. This seems like something that should be pretty easy to implement.
On the positive side, I can't say that I've experienced any real accuracy problems when in actual use. Probably I don't tend to write so close to the edge where it might be an issue. It's more an annoyance that the cursor doesn't quite match the tip. It's actually less annoying than having my hand trigger s-note's zoom or the notification drawer every time I try to write something.
Click to expand...
Click to collapse
I wouldn't expect much help from a company that hires people who don't know the difference between "loses" and "looses". That's sad.
Sent from my GT-N8013 using xda app-developers app
Do you use magnet type cover? Try to remove it and see if the problem fixed
Sent from my GT-N8000 using xda premium
Hi to all. I am having a note 2, it has the same s pen as all the note series... i had that problem but it fixed when i did update! Try to go on developers options and check 'show pointer location' to check if the problem is the spen or the software.
I also notices that when used near the camera there is a great loss of accuracy .... and good to know that's not hte fault of my Note:good:
Scorpion_Ibm said:
I also notices that when used near the camera there is a great loss of accuracy .... and good to know that's not hte fault of my Note:good:
Click to expand...
Click to collapse
Mine just works fine, even on the ledges! Sometimes, but sometimes when the accelerometer is uncalibrated the S-Pen just stop responding well. I calibrate the accelerometer using this game https://play.google.com/store/apps/details?id=com.fgol.HungrySharkEvolution Just go on Options/Change to tilt control(If necessary)/Calibrate
It worked for me!
Post results!
kokero said:
Mine just works fine, even on the ledges! Sometimes, but sometimes when the accelerometer is uncalibrated the S-Pen just stop responding well. I calibrate the accelerometer using this game https://play.google.com/store/apps/details?id=com.fgol.HungrySharkEvolution Just go on Options/Change to tilt control(If necessary)/Calibrate
It worked for me!
Post results!
Click to expand...
Click to collapse
Thanks for trying to help .... the slight offset near the edges is no problem for me but i had a relatively bigger offset near the top (near the cameras) but that appeared to be due to the magnetic part in the book cover i had what an idiot .. i thought the camera had magnetic parts that do this and forgot the magnet of my book cover
So now what i really have is the offset near the edges
For me it's not an overall offset issue but just near the edges where it makes taking notes, sketching particularly difficult. It's very frustrating that these tablets aren't better calibrated out of box and provide no option for calibration. I'd be very surprised if this couldn't be fixed through software but would probably require support through the driver.
The other issue I have is that the drawing point only visually aligns with the tip of the pen when the pen is 90 degree from the tablet and you're looking straight down at it. Provided you hold the pen at a relatively steep angle and you angle the tablet so you're looking mostly down at it (say on your knee or a tilted stand) it's not bad. But once you deviate from that, say by putting the tablet flat on a table in front of you so you're looking at down at around 30 degrees, the deviation from where the tip appear to be and where the drawing point is becomes significant. I find this very frustrating. While I still prefer the s-pen to a passive capacitive pen, the fact I can't draw where I think I'm drawing makes it hard to work with. I've been using the tablet as my primary note taking device but I'm getting frustrated enough that I may go back to pen and paper and scanning.
It's probably not possible to fix this issue without hardware changes. Although multiple calibration profiles might reduce the effect.
I guess I'll have to wait for better hardware before I can finally live a paperless life...
tmagritte said:
For me it's not an overall offset issue but just near the edges where it makes taking notes, sketching particularly difficult. It's very frustrating that these tablets aren't better calibrated out of box and provide no option for calibration. I'd be very surprised if this couldn't be fixed through software but would probably require support through the driver.
The other issue I have is that the drawing point only visually aligns with the tip of the pen when the pen is 90 degree from the tablet and you're looking straight down at it. Provided you hold the pen at a relatively steep angle and you angle the tablet so you're looking mostly down at it (say on your knee or a tilted stand) it's not bad. But once you deviate from that, say by putting the tablet flat on a table in front of you so you're looking at down at around 30 degrees, the deviation from where the tip appear to be and where the drawing point is becomes significant. I find this very frustrating. While I still prefer the s-pen to a passive capacitive pen, the fact I can't draw where I think I'm drawing makes it hard to work with. I've been using the tablet as my primary note taking device but I'm getting frustrated enough that I may go back to pen and paper and scanning.
It's probably not possible to fix this issue without hardware changes. Although multiple calibration profiles might reduce the effect.
I guess I'll have to wait for better hardware before I can finally live a paperless life...
Click to expand...
Click to collapse
May be try this app with this kernel the post says that it can successfully reset the Spen callibration
Post with kernel: http://forum.xda-developers.com/showthread.php?t=2299406
App: https://play.google.com/store/apps/details?id=com.whitedavidp.reset.spen
It was the case
wiien said:
Do you use magnet type cover? Try to remove it and see if the problem fixed
Sent from my GT-N8000 using xda premium
Click to expand...
Click to collapse
That was it for me. The case was causing that. When I read your post I realized that my case has a keyboard and you can remove it. It stays in place with a magnet. So I removed it and it works as expected. so now I know to get it on the edges it's that. Thanks:good:
Greetings! I am simply wondering if this tablet provides a decent drawing experience when compared to, say, the Galaxy Note line of products. I owned a Galaxy Note 8.0 which was wonderful, but after an unfortunate mishap, it's been rendered useless. I've been waiting for a tablet that is somewhat small, has an included stylus, and is very powerful (Stock Android is certainly another plus!). This seems to be the only device that fits the bill. I just want to know if actually feels like a pencil on paper from (hopefully) unbiased owners. I mainly intend to use ArtFlow and LayerPaint HD.
So nice to hear that there are people noticing that feature of the shield Tablet. So generally after some trys with different apps, Imo it works pretty well. But it can't be compared to an device with an active digitiser.
So you have your main focus on drawing. I would say you can have the same results as with an Spen for example. But you have to learn how to use the Direct Stylus.
In many reviews and threats & posts you will read about pressure sensitivity.
That not the truth. Direct stylus recognise the size of the tip touching the surface. There are two ways to achieve a bigger surface with this kind of stylus :
1. Press real hard on the display
That would be the normal "use" of an pen and an stylus with digitiser.
That is the reason you will read about flimsy tips of the stylus.
2. Twist the stylus while Drawing
When you take a look at the Tip of the stylus you can imagine, how the developers intend to use this kind of stylus .
For example when you want a decent line with a fine start, getting bigger till the end you have to start with the small tip and turn the stylus to a bigger spot.
l know it sounds unfamiliar, specially, when you are used to the Spen of Samsung, but after some tries it works quiet well.
As Nvidias CEO said during presentation , it depends on your personal skill..
Another important thing is the palm recognition.
It works most the time but it uses the same technique as pressure sensitivity. So it sometimes happen that when you lift or move your palm, You are giving an input. The best workaround is to activate the "stylus only mode " in the Menubar.
The annoying thing is, that you can't use pinch to Zoom or your Finger to move your workingsheet.
Hope I could give you a little clou on using the Direct Stylus on the shield Tablet.
If you got some more questions feel free to ask or pm me
Sent from my SHIELD Tablet using XDA Free mobile app
I use artflow on SHIELD and its ok. I love the stylus and it feels nice to draw with. Not sure if its the tablets senors or ArtFlow but sometimes it isnt accurate, where you think you're touching isn't what the tablet detects. I've only noticed this really with ArtFlow, Dabbler seems to be more accurate so I'm assuming its just the app itself. ArtFlow has rolled out updates for the Tegra k1 since I've downloaded it, so hopefully it gets better. I havn't tried Layer Paint yet.
---------- Post added at 10:52 PM ---------- Previous post was at 10:43 PM ----------
Hudrator said:
The annoying thing is, that you can't use pinch to Zoom or your Finger to move your workingsheet.
Click to expand...
Click to collapse
Pinch Zoom works fine for me in Stylus only mode for ArtFlow. It is a tad buggy, sometimes instead of zooming/moving it acts as an eraser...which is odd. But the undo button fixes it. Its not perfect but it works for me.
Thank you so much guys! Could either of you test a pencil on the display? It works with the Tegra NOTE 7 and some other devices like the Galaxy S4/ S5. Make sure it's dull so you don't destroy your screen if you do try it.
What about small curls?
Hi, stylus lovers!
I have a question to owners of Shield Tablet.
Some time ago I've tested my colleague's Tegra Note 7 tablet (EVGA branded).
That tablet has Direct Stylus too. And it's stylus "engine" has an distressing flaw: it "eats" small curles. For example if I'm writing small handwritten letter "b" (the upper oval first and then the lower oval) the upper oval will be drawn in very reduced size, almost to dot. But the lower oval will be almost normal. It applies other letters with upper curls like handwritten "f", "h", "k" and "l" too.
(I hope, my explanation and my English is not very ugly.)
So, the question is how Shield Tablet's stylus behave in such situation? Can you just write some handwritten phrase in any drawing app and check out if small curles of letters were "eaten"?
Thanks!
That's a thing I noticed too. But I think I can explain a little bit about that.
First of all, what you experienced there is also to see when you are writing with for example an Spen. You just really have to take a close look.
To make the input look cleaner the software kind of renders the detected input and round it up to make it look more fluid.
The picture I posted is out of the App "Write ". There you have a setting where you can choose how much the input gets rounded.
l turned up the setting from No 1 to No 5. The movement on the screen was the same in every line.
So you can see how much influence an App setting can make .
So you can't say yes or no to your question. For me the standard Android handwriting recognition makes a really good job in terms of showing what's been written on the Display without the chicken influence
OneNote is imo an negative example for that.
##### Can't post pictures at the moment.... #####
Sent from my SHIELD Tablet using XDA Free mobile app .
Hudrator said:
the software kind of renders the detected input and round it up to make it look more fluid
Click to expand...
Click to collapse
Thank for quick reply!
I fully understand that moment. I've spent a lot of time with S-Pen (Note 8 and Note 10.1 2014) and Tegra Note 7 too.
And I can state: S-Pen is more laggy but it don't eats small curls as Tegra Note 7 stylus does.
I played with several drawing apps on Tegra Note 7 and all of them behaves similarly in curl eating.
There is one stylus sensivity setup option in Tegra Note 7 and it doesn't give any good effect for my interest.
I've forgot to say clearly: my interest is not in handwriting recognition. I just want to have precise drawing and handwriting.
So, the question is: does Direct Stylus in Shield Tablet eat curls less than in Tegra Note 7?
Obviously my question sounds whimsy. But I can't do anything with it. I want precise stylus.
No you don't. I really can understand you. Had the same headache.
On shield tablet l can't find a setting like you mentioned.
I really would like to post some examples but the App won't let me do this for you. So I would say order it and try it on your own. Maybe you find a shop with an good return policy?
I can make thinks look like been eaten up but with the same app l can write the best texts. There it really depends on the kind of pencil & brush and thickness you choose ...
Really sorry mate
Sent from my SHIELD Tablet using XDA Free mobile app
So the stylus in the shield isn't active? It's just like any other capacitive stylus that emulates a finger, maybe a bit better?
{Diemex} said:
So the stylus in the shield isn't active? It's just like any other capacitive stylus that emulates a finger, maybe a bit better?
Click to expand...
Click to collapse
It's way way better.
Due to some Tegra's digitizing magic the Direct Stylus 2 performs like an active stylus. The most valuable advantage of Direct Stylus 2 over other capasitive stylus digitizers is very high sensivity and selectivity.
Here is good video on it:
https://www.youtube.com/watch?v=PaRT0E-RTPQ
And here is a video on older Tegra Note 7 (with an older Direct Stylus digitizer) digitizer comparison with S-Pen digitizer on Galaxy Note 8 and capasitive sensor of Nexus 7:
https://www.youtube.com/watch?v=wtZz4PjcAUk
@Kirrrr Thanks for the videos. It seems to me like they optimized the ability for the touchscreen digititzer to pick up the size of a touch. The soft tip of the pen changes its size depending on the way you hold it and the pressure. Reporting of touch size is actually build in to android. I tested it and different fingers report different sizes. My pinky 1 - 2, forefinger 2 - 4 and thumb 3 - 5. I think that lots of drawing apps don't take advantage of this because the variance is so small when using the same finger. It seems like they where using a customized version of sketchbook that actually takes the touch size into account. I doubt the tip is going to last long and it didn't look like the tip is replacable. Software wise what they did is impressive, but I think I'm going to skip this tablet.