Related
I'm convinced that the screen is slightly out of calibration - but I can see no way to reset the calibration. (I'm ex WinMo!) - it must be in there somewhere - or do i need "an app for that".
Advice appreciated
G.
I was also thinking this. Unfortunately I still have not bought the phone yet, or I would of tried creating an app to test this theory. If a touch can be captured in x/y data, we could see what the problem is with the bottom row keys.
gf_gollum said:
I'm convinced that the screen is slightly out of calibration - but I can see no way to reset the calibration. (I'm ex WinMo!) - it must be in there somewhere - or do i need "an app for that".
Advice appreciated
G.
Click to expand...
Click to collapse
The more I use the phone, I'm starting 2 think that the screen is not so much out of calibration, but is very sensitive 2 the angle that U touch the screen. when I use 2 hands 2 use the phone, It seems 2 always respond correctly
cause my finger is touching straight down, but if I use 1 hand and try 2 reach
across the it responds off a lil at times. 2 solve this I put the phone 2 the end of my
fingers and secure it as far from my thumb as possible. awkward at first 4 me be it responds correctly when I do. Hope this is clear and helps U. I do have big hands though.
esincho said:
The more I use the phone, I'm starting 2 think that the screen is not so much out of calibration, but is very sensitive 2 the angle that U touch the screen. when I use 2 hands 2 use the phone, It seems 2 always respond correctly
cause my finger is touching straight down, but if I use 1 hand and try 2 reach
across the it responds off a lil at times. 2 solve this I put the phone 2 the end of my
fingers and secure it as far from my thumb as possible. awkward at first 4 me be it responds correctly when I do. Hope this is clear and helps U. I do have big hands though.
Click to expand...
Click to collapse
I might know what you are talking about. At times I can't slide home screens when using the phone with one hand and it can get very annoying, but I blame myself rather than this wonderful phone.
I also remember my wife using the phone while it was flat on the desk and it would not respond properly, but as soon as it was picked up and did the same procedures it would work properly. We were thinking that It may have something to do with the angle of the phone and our fingers on the screen. Dont really know I just know how to get it working.
Have you guys rooted and enabled multi-touch?
If not, are you sure this isn't to do with the lack of multi-touch. On my N1 I have the same problem when using it with one hand. And I've noticed it's because part of my palm sometimes touches the screen as I'm holding the phone. As theres no multi-touch it won't register what I'm selecting with my thumb until my palm stops touching the screen.
At first I suspected it was an issue with the screen responsiveness/calibration aswell. Because as you try and tap with your thumb a few times, eventually you move your palm and it works.
However, then I took a closer look everytime it happened, and noticed part of my palm was always touching the screen.
Obviously this doesn't happen when you use two hands as usually you will then hold the phone with your fingertips, not by wrapping your hand around it.
5to1 said:
Have you guys rooted and enabled multi-touch?
If not, are you sure this isn't to do with the lack of multi-touch. On my N1 I have the same problem when using it with one hand. And I've noticed it's because part of my palm sometimes touches the screen as I'm holding the phone. As theres no multi-touch it won't register what I'm selecting with my thumb until my palm stops touching the screen.
At first I suspected it was an issue with the screen responsiveness/calibration aswell. Because as you try and tap with your thumb a few times, eventually you move your palm and it works.
However, then I took a closer look everytime it happened, and noticed part of my palm was always touching the screen.
Obviously this doesn't happen when you use two hands as usually you will then hold the phone with your fingertips, not by wrapping your hand around it.
Click to expand...
Click to collapse
Dude, thanks for using your first post on us.
I think you are correct about the palm touching the screen. I have rooted and installed the modaco custom ROM, but I have not installed anything else for multi-touch. I will definitely look into this, thanks.
rydr1 said:
Dude, thanks for using your first post on us.
I think you are correct about the palm touching the screen. I have rooted and installed the modaco custom ROM, but I have not installed anything else for multi-touch. I will definitely look into this, thanks.
Click to expand...
Click to collapse
No problem.
Coming from an iPhone it was not something I ever thought about, so was quite releaved when I figured out why it was happening.
Was on here looking for widgets when I spotted this so thought I'd register and save you scratching your head trying to figure it out like I did.
Lots of stuff to love about the phone, especially the battery life which I'm really impressed with and hadn't even expected to be a plus point over the 3GS. This was just supposed to be a stop gap until the iPhone 4G, but I'm actually thinking I may stick with it now
5to1 said:
This was just supposed to be a stop gap until the iPhone 4G, but I'm actually thinking I may stick with it now
Click to expand...
Click to collapse
If you stick with it then welcome to android.
If you don't then you just need to have fun with this phone.
I've been finding ways around the major niggles I had over the last couple of weeks. So it's looking promising that I won't be splashing out for another iPhone in June/July.
It helps that my brother has one and I've had some time to play with it and get everything the way I want it. Which is part of the reason I got it now. If it had been during a really busy period (work wise), i'd probably be back on the 3GS.
Hey is anyone elses GTab's touch sensitivity kind of off?
I noticed, compared to the iPad and Galaxy Tab, some times it takes me 2-4x of tryinng to press something to get it going.
Its almost like the screen cant pick it up sometimes. And sometimes when scrolling, it selects things, when im just Trying to scroll..
Also the top left HOME button on screen is always iffy, most times ill need 2-4 more times 2 press it to get it going.
I am using TNT 2.2.
Anyone else noticed this? i feel like its hardware.
Definetely not as responsive as my EVO. Maybe its the cheap screen. I wish it could be fixed via software, but fat chance. I guess not all capacitive screens are created equal.
supanatuwral said:
Definetely not as responsive as my EVO. Maybe its the cheap screen. I wish it could be fixed via software, but fat chance. I guess not all capacitive screens are created equal.
Click to expand...
Click to collapse
You nailed it. IMO Samsung has been making the best color screens for years.
Have had absolutely no problems with touchpad responsiveness from my gTab... Just as sensitive and responsive as my Dinc.
Really does seem like this hardware is hit or miss... Some tabs have no issues some have many.
You guys are just plain spoiled. I've gone through Palm IIIx to now the gTablet, and it just simply has the most responsive touch screen that I've ever used, but I've had recent experience with the dreadful Augen GT and the slightly less dreadful White Pandigital Novel, both of which had worse touch screens than other devices that I've used.
One thing that I do, do for the gTab though is to clean the screen quite a bit. At a minimum I do so before every use as I find the fingerprint/body oils buildup to be annoying in fairly short order and it might have some impact on touch responsiveness. It's the worst fingerprint magnet that I've ever seen actually...
No issues here with single touch sensitivity, pretty good on that. Just as good as my Nexus One. Multitouch and pinch-to-zoom still a bit flaky. I am hopeful that will be resolved by software and/or driver improvements, as it was on the Nexus One.
The only issues I have are when the screen is too dirty or too clean. When I really scrub and clean the glass off entirely, at first it's a bit too "sticky" almost when my finger contacts it - maybe that's because it's winter here in the Northeast and my skin is dry. Once I've used it a bit and it gets some finger grease on it, it works perfectly. But if it gets grit or solid dirt on it, that can definitely interfere with the touch screen too, as with any capacitive screen.
I suspect the optimal thing would be a really good screen protector that's easy to clean and has that smooth finger contact feeling out of the box, like the iPad's glass does, for example, which I think has something to do with the oleophobic coating.
Typing this on my gtablet. The issue for me is the keyboard. There are parts of the screen that are unresoonsive making some letters not get tapped. The A key and l keys in particular. As a result I can't type smoothly or naturally because I will make several errors along the way. This does not happen onky iphone or my wires ipad.
it might bemy rrleason for sending it back as it takes too ongoing totyr correctly and I get tire d of all the corrections.
Well if your using the stock tnt keyboard, it sucks. We can learn from the ipad, with the size of the screen it has huge keys that cover a lot more of the screen then our stock tnt keyboard. I use smart keyboard pro with the key heights set to maximum and it works so much better, like 100x better. Even has voice to text.
Can people check their keyboard? I find that if I type most of the keys they type fine. However, the letter a key seems to only work when pressed offcenter which prevents. From typing properly as I must deliberately slow down and make sure it is correctly typed otherwise I get many errors. Could this be a defect in my screen?
Or is this a ui problem with tnt?
This could be a deal breaker as I misspelled every word if. Has h letter A
Letter A
I have the same problem with the letter A, and sometimes P. Otherwise touch is great
Figured why this tablet is driving me nuts. There are two dead zones on this tablet. Someone please do this test so I can figure out if this is just my tablet or all g tablets.
Download mulitouch vis test. Do rapid light touches in the area where the 'a' key is and delete key are. If I do this test in the middle of the screen it registers every single tap. But in those two areas I can sometimes tap 10 times in a row and not have a single tap register.
If this all g tablets then I think it's going back.
Also is there a keyboard with arrow keys? Trying to place the cursor can be a real pain.
Agreed bout the dead spots. The stock tap n tap western keyboard seems tominimize them due to the angles but if I try another keyboard I miss the a and the return button all the time
Stocklone said:
Figured why this tablet is driving me nuts. There are two dead zones on this tablet. Someone please do this test so I can figure out if this is just my tablet or all g tablets.
Download mulitouch vis test. Do rapid light touches in the area where the 'a' key is and delete key are. If I do this test in the middle of the screen it registers every single tap. But in those two areas I can sometimes tap 10 times in a row and not have a single tap register.
If this all g tablets then I think it's going back.
Also is there a keyboard with arrow keys? Trying to place the cursor can be a real pain.
Click to expand...
Click to collapse
Downloaded the app as well because I, too, am having the same screen non-responsiveness issue. Lo and behold the area where the "L" key is is a pretty dead spot. It would register about 40% of the quick taps I did in that area. Is this is a software issue? If so, I can live with it and hope our wonderful devs release a software build that resolves this otherwise, this thing may be going back because it's driving me up the wall!
I do see the occasional missed tap here and there, but no consistent dead areas that I've noticed (the A and L buttons on keyboard seem fine to me).
Multitouch sensitivity is wayyyyy mis-calibrated though - you have to use very heavy finger presses to get multitouch to register. This is some sort of driver or calibration issue that should be easily solved.
I found a binary called TSCalibration in the /system/bin directory on my VEGAn ROM G Tablet. Tried running it from terminal, but it seems to be looking for a calibration.ini file on the SDCard. I'd be willing to bet we could figure out how to fix some of the touchscreen issues with some work, because I suspect they are principally software related.
If your issues with the touchscreen are anything like this...exchange it...
My new one requires very little effort if any at all to get the screen to respond...
However, if you're talking about the once in a while miss of a touch...yes, I agree with cutterjohn....you're spoiled. Return the device asap, so I could pick it up from an outlet...please?
RavenII said:
If your issues with the touchscreen are anything like ...exchange it...
My new one requires very little effort if any at all to get the screen to respond...
However, if you're talking about the once in a while miss of a touch...yes, I agree with cutterjohn....you're spoiled. Return the device asap, so I could pick it up from an outlet...please?
Click to expand...
Click to collapse
There is a big difference between these dead spots and the occasional miss. I have no problem with the occasional miss. I just have to adjust to how my finger touches the tablet to get more consistent hits.
There are areas of my tablet that consistently do not behave like the other areas. Does that sound normal to you? I can't have a tablet where anything in the 2 corners is extremely inconsistent. If I have the tablet oriented a certain way the soft-buttons get put into one of the bad corners and that is really frustrating.
I don't think it is how I am holding it because the problem follows the physical corners and it is not relative to my hand. So that rules that out. And I washed my hands and gave the tablet a good cleaning so dirt/grease/grime is not an issue either. It could have been too clean but why only two corners?
I have many weeks to go on my 30 days so I will keep screwing with it to see if I can come up with anything that is a workaround or explains why it is happening. It is insanely fast and it's modding future looks extremely bright with such talented people. If I get fed up enough, I'll exchange it and hopefully get one with a even touch response for the whole screen or simply return it and wait a couple more months for Honeycomb tablets.
RavenII said:
If your issues with the touchscreen are anything like this...exchange it...
My new one requires very little effort if any at all to get the screen to respond...
However, if you're talking about the once in a while miss of a touch...yes, I agree with cutterjohn....you're spoiled. Return the device asap, so I could pick it up from an outlet...please?
Click to expand...
Click to collapse
Whoa. That video was pretty bad. While mine is not like that (thank God), I just tried hitting the app drawer key and it only registered after the 13th tap?!?! seriously wtf. While it isn't a "dead zone" per se, that's still pretty bad. There has to be a software fix to recify this issue with the right side of the screen. (my "L" and "delete" button are pretty bad as well).
THAT is a defective product...
I'll do another video to compare with my new one...WITH funky assed salty sweat all over the screen. Works flawlessly...
Is your model that is working well running stock firmware and keyboard?
mine is tent lite and the stock keyboard is ok. It if I try to use the alternative keyboards then I get consistent misses on key presses especially on the letter a.
I'm always tapping *constantly*, like 10-20 times on certain spots around the corners and edges of the screen, I'm about to return mine because of this.. Believe I'm still in the 2 weeks with office depot, will have to go snag the $350 one over at sears and hopefully it will come with a screen protector this time (this one I have didn't come with one, wonder if that has to do with the dead spots)..
Hi all,
I think my SGN 10.1 is a fine tablet, but I have an issue with the pen: it isn’t recognized when it makes very light contact with the screen. In particular, light fast clicks don’t register consistently. The nib is a little loose and clicks a little bit. When I press down on the screen just until the tip makes contact with the back-end, no response. I have to press just a little more for the touch to register.
Do you experience the same thing, do you think it’s normal behavior, or should I return it?
Did you try reseating the nib?
toenail_flicker said:
Did you try reseating the nib?
Click to expand...
Click to collapse
Yes, and I tried a different nib as well. So I guess you think I have a real issue? In your opinion, should the tablet react to the lightest touch or not?
I think the actual convenience of this pen is more sensitive than finger on SGN 10.1,even the original SGN.
donglepierre said:
Yes, and I tried a different nib as well. So I guess you think I have a real issue? In your opinion, should the tablet react to the lightest touch or not?
Click to expand...
Click to collapse
After reading your post, I can confirm that my one reacts in the same way after testing.
For me this is not an issue as I have no real need to touch and move the screen so lightly. Everything I have practically used it for has worked without any hiccups and I have been able to achieve the desired results such as flawless note taking, browsing with the pen, doodling now and again.
Which task will you perform that requires such sensitivity?
My only complaint is that when I write using the S-pen, I occasionally press the side button which I wish I could disable.
HasC said:
After reading your post, I can confirm that my one reacts in the same way after testing.
For me this is not an issue as I have no real need to touch and move the screen so lightly. Everything I have practically used it for has worked without any hiccups and I have been able to achieve the desired results such as flawless note taking, browsing with the pen, doodling now and again.
Which task will you perform that requires such sensitivity?
My only complaint is that when I write using the S-pen, I occasionally press the side button which I wish I could disable.
Click to expand...
Click to collapse
Thanks a lot for the info! The "issue" nags me in normal use, like clicking buttons and hyperlinks. I am a light-handed user, I like to click lightly and quickly. I also like the idea of not putting too much stress on the screen, fearing premature damage/scratching. But if everybody is on the same boat, I guess I will have to adjust, for everything else works fine, in particular the handwriting recognition which I find quite impressive IMO.
tonyleeloveyou said:
I think the actual convenience of this pen is more sensitive than finger on SGN 10.1,even the original SGN.
Click to expand...
Click to collapse
But how sensitive is your pen? Can you succesfully click on buttons and menus fast and with a very light touch consistently, or does it skip clicks like every five tries?
donglepierre said:
Thanks a lot for the info! The "issue" nags me in normal use, like clicking buttons and hyperlinks. I am a light-handed user, I like to click lightly and quickly. I also like the idea of not putting too much stress on the screen, fearing premature damage/scratching. But if everybody is on the same boat, I guess I will have to adjust, for everything else works fine, in particular the handwriting recognition which I find quite impressive IMO.
Click to expand...
Click to collapse
I wonder if there is a way to adjust screen sensitivity like in CM....
ngocdao said:
I wonder if there is a way to adjust screen sensitivity like in CM....
Click to expand...
Click to collapse
I think in my case, the problem is more “responsiveness” than “sensitivity”. The touch screen is responsive to the finger, not so much with the pen. And the sensitivity to pen pressure is very good. It’s just that the pressure threshold for the pen to be recognized is bit too high for my taste. I’d like the feedback of other users before considering replacing my unit.
donglepierre said:
But how sensitive is your pen? Can you succesfully click on buttons and menus fast and with a very light touch consistently, or does it skip clicks like every five tries?
Click to expand...
Click to collapse
Mine skips sometimes and is inconsistent as well. My Note phone behaves the same way.
donglepierre said:
Thanks a lot for the info! The "issue" nags me in normal use, like clicking buttons and hyperlinks. I am a light-handed user, I like to click lightly and quickly. I also like the idea of not putting too much stress on the screen, fearing premature damage/scratching. But if everybody is on the same boat, I guess I will have to adjust, for everything else works fine, in particular the handwriting recognition which I find quite impressive IMO.
Click to expand...
Click to collapse
I don't think there is any need to worry as Samsung would have carried out stress tests to an acceptable level to prevent scratches and breakage, it sounds like even when you adjust, you will probably use less pressure than me anyway, I am quite heavy handed.
I have been using the phone version of the Note for a while and have never had issues with scratches or breakage. I intend to use the Note as I would use pen on paper and if it cannot handle that then it is not worth the money that Samsung are charging for it and I will be the first to take it back if there were problems under the sales of good act we have here in the uk I.e. being fit for purpose, durable quality etc.
You may want to get a screen protector if you are still concerned.
If you draw a lot the spen imprints a lot of sgnote s/p. I have a really heavy hand and draw with immense pressure on both notes and they have yet to show any wear...
we don't see things as they are; we see things as we are.
donglepierre said:
Hi all,
I think my SGN 10.1 is a fine tablet, but I have an issue with the pen: it isn’t recognized when it makes very light contact with the screen. In particular, light fast clicks don’t register consistently. The nib is a little loose and clicks a little bit. When I press down on the screen just until the tip makes contact with the back-end, no response. I have to press just a little more for the touch to register.
Do you experience the same thing, do you think it’s normal behavior, or should I return it?
Click to expand...
Click to collapse
Yes, imho your pen /tab is malfunctioning. I've received my 2nd tab, which unlike the 1st one creaked on both sides *and* exhibited the same light touch pen behaviour problem. It was very frustrating to use. Other than some stutter the 1st tab works just fine. So, I decided to send the 2nd tab back due to 2 issues I mentioned earlier. Interestingly enough and going by the serial # the 2nd tab was from the earlier build.
I say get it exchanged if you can. Hth.
SM05 said:
I say get it exchanged if you can. Hth.
Click to expand...
Click to collapse
You just made things more difficult for me. Hmmm whom should I believe?... I don’t know lol
Life is short. If you're not happy, return it.
toenail_flicker said:
Life is short. If you're not happy, return it.
Click to expand...
Click to collapse
I’m happy. But I would be happier if I knew for sure that I could do better by replacing my Note. All things considered, I think I’ll keep it. I don’t think I’ll get an S-Pen without a little leeway in the nib (I had an Intuos 3, and I have vague memories of this).
Bamboo pen/tip design looks nothing like the spen
we don't see things as they are; we see things as we are.
For those interested, a related thread about the Wacom Intuos 4: http://forum.wacom.eu/viewtopic.php?f=2&t=993 (see the post by ivanzorkic)
That’s exactly what I needed to have confirmation on. So I’ll keep my Note as is, quality is good enough. Thanks everyone!
I'm having the same problem with my second Note 10.1. My first Note 10.1 (that was stolen) was bought in September. This one was bought a few days ago. It's different from my first one. The screen sticker has more logos such as DivX and ChatOn and is in colour as opposed to white only. The S Pen fits tightly in the slot and is hard to remove compared to the old one which was perfect and easier to remove. Light touches with the pen don't register making skips in the lines where I reduce pressure.
Could this be a manufacturing issue affecting the newer models? Should I exchange it or is there calibration I can do?
I have the Galaxy Tab 2 7.0, rooted with 4.0.4, and have not had any problems with it for the most part.
I recently downloaded Sketchbook Express to see how well the tablet could handle drawing. It handles it very well with one exception: the closer you get to drawing at a 45* angle, the more wavy the lines get. If I quickly swipe in that direction, it straightens out, but the slower I go, the more pronounced the waves or zig zags get. This happens using any of my fingers, the $20 Rocketfish stylus, and the $30 Wacom Bamboo stylus. All attempted on a freshly cleaned screen. I've also tried different apps with the same result. This guy had the same issue, as have others from what research I could pull up, but outside of unhelpful answers of "it's your stylus" (it's not), they all seem to have given up on getting help.
I've tried these apps on my friend's Evo 4G 3D, running Android 4.0.3, and had the same issue. I then tried on my rooted Xperia Play running Android 2.3.3 Gingerbread, and did not have this issue. I'm not entirely convinced it's an OS version that's making the difference, but I'm not able to find much information about the screens these devices use outside of "capacitive touch". I did learn that these screens use the corners to determine the location of input being received, so maybe moving directly in the direction of a corner is causing it to mess up?
Long story short, my questions are thus: is there any way to fix, calibrate, or compensate for this issue? Is it the screen, a hardware issue, or something else? Is there anything I can do?
Thanks for your time.
pWEN said:
I have the Galaxy Tab 2 7.0, rooted with 4.0.4, and have not had any problems with it for the most part.
I recently downloaded Sketchbook Express to see how well the tablet could handle drawing. It handles it very well with one exception: the closer you get to drawing at a 45* angle, the more wavy the lines get. If I quickly swipe in that direction, it straightens out, but the slower I go, the more pronounced the waves or zig zags get. This happens using any of my fingers, the $20 Rocketfish stylus, and the $30 Wacom Bamboo stylus. All attempted on a freshly cleaned screen. I've also tried different apps with the same result. This guy had the same issue, as have others from what research I could pull up, but outside of unhelpful answers of "it's your stylus" (it's not), they all seem to have given up on getting help.
I've tried these apps on my friend's Evo 4G 3D, running Android 4.0.3, and had the same issue. I then tried on my rooted Xperia Play running Android 2.3.3 Gingerbread, and did not have this issue. I'm not entirely convinced it's an OS version that's making the difference, but I'm not able to find much information about the screens these devices use outside of "capacitive touch". I did learn that these screens use the corners to determine the location of input being received, so maybe moving directly in the direction of a corner is causing it to mess up?
Long story short, my questions are thus: is there any way to fix, calibrate, or compensate for this issue? Is it the screen, a hardware issue, or something else? Is there anything I can do?
Thanks for your time.
Click to expand...
Click to collapse
The problem is the digitizer. It's cheap. I think all of the g tabs have this issue. Mine is terrible drawing diagonal lines and even scrolling in landscape mode is choppy. Only way around it from what I can tell is to apply more finger surface area. That seems to fix it. But since you're using a stylus that's not possible. If you find a solution to calibrate the digitizer, please let me know!
I have the same exact problem and the same exact request. There must be some option to increase sensitivity to at least minimize this effect. It's the only flaw I can find on this otherwise wonderful device.
And honestly, for the prize it cost, I would expect this not to exist. But... I have it now and would like to be able to use it in it's full extent and power.
dammit
Nice to know I'm not the only one who notice that, but it's crazy how my finger seems preciser than my pen and even more, that in my Galaxy S the pen works perfectly. I was so happy to use some drawing apps on the tab but when I tried...
I tried in my Tab 7 2, then I'll try on my uncle's 10.1 just to check.
hello all,
just to report the same issue. i have same problem with my samsung galaxy tab 2 7" like you all here. i get this problem since the first time i bought it (about a month ago). drawing the lines and reading in landscape mode is choppy :crying: same as MrHyde03 said. i have been tested my cousin's tablet to draw diagonal line for comparison, he has galaxy tab p1000. and the line result i get, though his tab has wavy line too, but mine has more wavy line than his tablet. i didn't noticed his tablet has so wavy line, just a little. i did it with my finger.
i hope this issue can be fixed later.
could be a solution
I don't know if it's just for marketing or what, but maybe the original Samsung stylus is better for these screens.
I wish someone could certify this...
I bave The Same Problem... Vawy diagonal and arcs. The same pens and fingers works fine on my Asus TF 101...
I have the same problem
gonzogonzo said:
I bave The Same Problem... Vawy diagonal and arcs. The same pens and fingers works fine on my Asus TF 101...
Click to expand...
Click to collapse
Hi guys, I have the same problem. Horrible response when i draw with a (cheap) stylus and perfect when i do it with my fingers. Has anyone tried adonit jot pro or Dagi ??? Maybe they increase the contact area and it solves the problem. If so, please tell us!!!
Thanks for reading and waiting for a solution.
I know this is an old post, but I can't just abandon my own thread! I've done quite a bit of research on this since making this post, and sadly, it's the way the screen is. Strange that my Xperia Play and Galaxy S3 phones can do this, but the Tab 2 was given such a cheap screen. I ended up selling it and putting the money towards a Note 10.1 with S-pen, which works as I would expect it to.
my screen on my tab 2 7 works almost perfect, except when I draw diagonaly, it wiggles tons. the screen is clean amd it has done this sonce i first opened it. It does this regardless of if I use a stylus or my fingers, and it does the same on my sisters tab of the same kind. Is it fixable? or is ia just a hardware problem? Im an artist so this is getting really annoying, since it wont draw curves or circles because of this D:
Mine's done it since day 1 also, and as far as I know, it's a common "issue" with the digitizer. Basically, the digitizer cheap. Only way I've found around it is to apply more surface area with your finger.