Related
Hello everyone, I'll tell you what happened
First I was in CM13.1, then I flashed to oxygen OS 3.1.4 custom
(When I flash the ROM, without warning me the recovery was updated to the version TWRP 3.0.3-2TugaPower, previously being in a version inferior to 2.8)
After logging in to the new recovery, I noticed that the recovery version was not on the TWRP page, so I decided to flash the most recent version of TWRP (twrp-3.1.1-0-bacon.img), flashe it through Android sdk (Fastboot), everything went well the pc recognized me the OPO in fastboot Mode and flashe the recovery without problems, the problem came when I try to enter the new recovery the OPO does not enter the recovery stays in the OnePlus Logo.
(Before updating the recovery I tried to restate the backup of my previous rom CM13.1 but when I was going to restart it it stays in the OnePlus logo, and when I go to recovery I fixed that in the section of "Mount" system is not checked , Active but still the same, and when I return to recovery is removed.)
I ask you if you can give me ideas to be able to have recovery again and revive my OPO plz.
Molex69 said:
Hello everyone, I'll tell you what happened
First I was in CM13.1, then I flashed to oxygen OS 3.1.4 custom
(When I flash the ROM, without warning me the recovery was updated to the version TWRP 3.0.3-2TugaPower, previously being in a version inferior to 2.8)
After logging in to the new recovery, I noticed that the recovery version was not on the TWRP page, so I decided to flash the most recent version of TWRP (twrp-3.1.1-0-bacon.img), flashe it through Android sdk (Fastboot), everything went well the pc recognized me the OPO in fastboot Mode and flashe the recovery without problems, the problem came when I try to enter the new recovery the OPO does not enter the recovery stays in the OnePlus Logo.
(Before updating the recovery I tried to restate the backup of my previous rom CM13.1 but when I was going to restart it it stays in the OnePlus logo, and when I go to recovery I fixed that in the section of "Mount" system is not checked , Active but still the same, and when I return to recovery is removed.)
I ask you if you can give me ideas to be able to have recovery again and revive my OPO plz.
Click to expand...
Click to collapse
I guess you didn't read the OP of Oxygen Os correctly,he clearly mentioned that this 'Tuga Power Recovery' is patched to work with Oxygen Os's firmware and one should not flash any other recovery.Now,what you can do is this,
https://drive.google.com/file/d/0B-ikULjZZlloNHpOdVBrTzQxZzQ/view?usp=drive_web
> Download This file, install it somewhere and run Revert-2-CM.exe. Make sure you have fastboot drivers installed or it wont work.Avoid using any Antivirus program while doing this as they might give false alarms.After this you'll be restored to TWRP then you can flash any rom you want.The reason due to which you weren't able to find 'TugaPower Recovery' on TWRP page is because this is an Unofficial Recovery.
Question
What does the program do with the OPO?
If you are familiar with fastboot commands, this method should work. Had my OnePlus in the same situation last night messing around with Efidroid. Phone was bootlooping. Efidroid boot menu as well as recovery mode were both inaccessible. I had tried several other things but none worked for me. *CAUTION: this method did ERASE my userdata.* I downloaded a fastboot-able stock full firmware zip, then manually reflashed device. My beloved OnePlus is no longer my daily driver but still my fave device to experiment with so I just used COS 13.1 file. After full reboot, I downloaded and flashed official TWRP. Device is fully functional again, but without OOS installed.
Molex69 said:
What does the program do with the OPO?
Click to expand...
Click to collapse
It'll change your firmware and alter your recovery to a functional TWRP.You'll lose Oxygen Os after doing this.Though you can use this anytime when not being able to flash TWRP.
What should i do
Thanks a lot thanks to the method you told me my OPO has recovery again really thanks, but I have a question, I still in the TugaPower recovery, should I flash the stock recovery or the newest version of TWRP?
Because I do not know if flashing again the TWRP will happen the same
Hello everyone,
First of all, rom and recovery are not from me... I just want to make a full guide to help you
So let's go !!!!!
1 step: unlock bootloader
https://en.miui.com/unlock/
BE CAREFUL unlocking your bootloader will erase all your data (internal storage) so don't forget to make a backup
2 step: flash twrp recovery
Download the recovery image from here
https://drive.google.com/file/d/1-1CSfT4lQwFZngu6RI9eowLA9CmEMEPw/view?usp=drivesdk
Be sure to have adb and fastboot tools on your computer ... If not take a look at here
https://forum.xda-developers.com/showthread.php?t=2317790
Past TWRP_umi.img on minimal adb and fastboot directory.
Open a cmd here.
Enable usb debugging on your device
Reboot your phone on bootloader (hold volume down + power), connect it to PC and tape:
fastboot devices
fastboot flash recovery TWRP_umi.img
Then tape fastboot reboot while holding volume up button on your devices to reboot in recovery
3 step:
At the first launch of Twrp You have to choose SWIPE TO ALLOW MODIFICATION
4 step:
THIS ONE OF THE MUST IMPORTANT STEP
In twrp menu you have to go in Wipe data on choose format data
Otherwise the ROM will not boot.
5 step:
Reboot into recovery from twrp.
6 step:
Connect your phone to your PC and paste the xiaomi.eu ROM of your choice (stable or Dev)
7 step:
Flash ROM from recovery
8 step:
REBOOT AND ENJOY :good::good::good:
Does Xiaomi EU Rom run either on encrypted and unencrypted storage?
I cant get this to work, ive been trying everything for hours. I am sure i am missing something stupid but if anyone has any new ideas please let me know. I unlocked my device today, flashed twrp via fastboot, rebooted to recovery, formatted data then went on to install xiaomi eu rom. Ever since trying this, i am constantly booting into recovery or hitting a boot loop. i have formatted data more times than i care to think of ha ha. ive tried flashing the latest fastboot rom via mi unlock tool to do a fresh start but keep getting ''flash crclist error". Ive also tried flashing miui stock via twrp and it also, doesn't boot. ive tried many combinations in between. My next option is to try the fastboot global rom (though i believe i have a chinese device), i am waiting for it to download. If anyone knows what i am doing wrong i will be eternally grateful if you can tell me what it is. I'm so frustrated, been flashing roms for years, never had anything take as long as this :crying:
carolef1984 said:
I cant get this to work, ive been trying everything for hours. I am sure i am missing something stupid but if anyone has any new ideas please let me know. I unlocked my device today, flashed twrp via fastboot, rebooted to recovery, formatted data then went on to install xiaomi eu rom. Ever since trying this, i am constantly booting into recovery or hitting a boot loop. i have formatted data more times than i care to think of ha ha. ive tried flashing the latest fastboot rom via mi unlock tool to do a fresh start but keep getting ''flash crclist error". Ive also tried flashing miui stock via twrp and it also, doesn't boot. ive tried many combinations in between. My next option is to try the fastboot global rom (though i believe i have a chinese device), i am waiting for it to download. If anyone knows what i am doing wrong i will be eternally grateful if you can tell me what it is. I'm so frustrated, been flashing roms for years, never had anything take as long as this :crying:
Click to expand...
Click to collapse
try rhis
format data (not wipe)
put rom.zip unto ur internal storage
wipe cache an dalvik cache
now flash the zip
now reboot to recovery
wipe cache an dalvik cache
an now go to reboot menu
an now power off
an now power it on
-fluffy- said:
try rhis
format data (not wipe)
put rom.zip unto ur internal storage
wipe cache an dalvik cache
now flash the zip
now reboot to recovery
wipe cache an dalvik cache
an now go to reboot menu
an now power off
an now power it on
Click to expand...
Click to collapse
Thank you for trying to help, unfortunately it just rebooting to my recovery still. I dont suppose anyone has any other ideas do they please I cant understand what on earth ive done wrong. Does anyone know why mi flash tool comes up with that error (flash crc list error)? qualcomm drivers are installed.
carolef1984 said:
Thank you for trying to help, unfortunately it just rebooting to my recovery still. I dont suppose anyone has any other ideas do they please I cant understand what on earth ive done wrong. Does anyone know why mi flash tool comes up with that error (flash crc list error)? qualcomm drivers are installed.
Click to expand...
Click to collapse
write what u do wen u try to flash the zip
an have u downloadet the correct zip file
Thanks everyone, i think it must have been something to do with the qualcomm drivers installed incorrectly. i have re-done that from scratch and managed to get mi flash tool working. Sorry to waste everyones time.
Greetings
I have followed the tutorials to perfection like 2-3 times and I still face the same issue
I always go back to TWRP after trying to boot into system.
I have tried 2 different recovery files
The experimental one asks for a password. and the other one works but keeps going back to recovery after flashing.
MIUI 11 rom
MIUI 12 rom
No matter what I do It keeps going back to recovery.
It's my only device so I truly need help.
I have tried re installing everything already.
At this point I just want to install stock rom and keep using it without flashing anything please help.
PHONE FINALLY REBOOTING INTO SYSTEM. I myself don't know what i did!!!
Bootloop (stuck on 5G logo) after flashing Xiaomi.eu ROM
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.
The problems started when I tried to install Xiaomi.eu Custom ROM : xiaomi.eu_multi_MI10_V11.0.25.0.QJBCNXM_v11-10
Downloaded the Xiaomi.eu ROM to PC, then copied to the Download folder of the Phone.
Started phone in upload mode or TWRP. > Wipe > Swipe to Factory Reset + Format Data.
When formatting data I erase all folders in the phone, including the Xiaomi.eu ROM copied in the Download folder.
Some tutorials suggest to copy the Xiaomi.eu ROM from PC to phone after formatting the data, just by connecting the phone in TWRP to the PC, by going to > Mount and enabling MTP.
Tried this method but when I send the Xiaomi.eu ROM file to the phone the progress bas doesn’t move.
So I restarted the phone, without installing the Custom ROM, went through all the screens of initial phone configuration. Lost Magisk and root (but I supposed that it’s not mandatory to install Custom ROM). Copied again the Xiaomi.eu ROM zip file to the Download folder. Rebooted to TWRP. This time I just did Factory Reset but without Format Data. Then > Install to install the Xiaomi.eu new ROM. Cleared Dalvik Cache then reboot.
PROBLEM : bootloop. Stuck with the 5G logo forever, waited more than 30 min, no change.
Still have access to recovery TWRP and to bootloader mode. I suppose this is a soft brick?
I did > Wipe, Swipe to Factory Reset + Format Data, restarted… no change.
Copied this time the Xiaomi.eu ROM to a clean formatted (FAT32) USB drive. As shown in some tutorials, you can us an external USB drive via USB OTG to install the Custom ROM via TWRP.
Factory Reset + Format Data, then I installed again the same Xiaomi.eu ROM from the external USB. Still stuck in bootloop.
Please I need help to fix the problem
I’m not an expert developer, but I’m not a complete noob either.
This is the first time I have troubles with a brand new Xiaomi Phone.
It’s the first time I get a very expensive phone, but had no choice (they are getting very expensive), because I always buy a Flagship Xiaomi to get all the community support possible.
And I had to change the ROM to Xiaomi.eu, because the Official Global ROM is full of bloatware I had a good experience with Xiaomi.eu ROMs with my old Xiaomi Mi 4 and Mi 5.
At this point I don’t mind going back to stock MIUI Global ROM.
I suppose that with access to boot loader I can flash the Official ROM from PC with MiFlash2020-3-14-0? If it’s the case can somebody show me detailed steps to do that?
For Mi 10 Official Global there is the Stable Full ROM (miui_UMIGlobal_V11.0.2.0.QJBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBMIXM_20200328.0000.00_10.0_global_09b168ff9e) (3.76 GB). Which One to flash from PC with MiFlash?
I can’t afford to hard brick the device
Thank you very much.
andromomo said:
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.
The problems started when I tried to install Xiaomi.eu Custom ROM : xiaomi.eu_multi_MI10_V11.0.25.0.QJBCNXM_v11-10
Downloaded the Xiaomi.eu ROM to PC, then copied to the Download folder of the Phone.
Started phone in upload mode or TWRP. > Wipe > Swipe to Factory Reset + Format Data.
When formatting data I erase all folders in the phone, including the Xiaomi.eu ROM copied in the Download folder.
Some tutorials suggest to copy the Xiaomi.eu ROM from PC to phone after formatting the data, just by connecting the phone in TWRP to the PC, by going to > Mount and enabling MTP.
Tried this method but when I send the Xiaomi.eu ROM file to the phone the progress bas doesn’t move.
So I restarted the phone, without installing the Custom ROM, went through all the screens of initial phone configuration. Lost Magisk and root (but I supposed that it’s not mandatory to install Custom ROM). Copied again the Xiaomi.eu ROM zip file to the Download folder. Rebooted to TWRP. This time I just did Factory Reset but without Format Data. Then > Install to install the Xiaomi.eu new ROM. Cleared Dalvik Cache then reboot.
PROBLEM : bootloop. Stuck with the 5G logo forever, waited more than 30 min, no change.
Still have access to recovery TWRP and to bootloader mode. I suppose this is a soft brick?
I did > Wipe, Swipe to Factory Reset + Format Data, restarted… no change.
Copied this time the Xiaomi.eu ROM to a clean formatted (FAT32) USB drive. As shown in some tutorials, you can us an external USB drive via USB OTG to install the Custom ROM via TWRP.
Factory Reset + Format Data, then I installed again the same Xiaomi.eu ROM from the external USB. Still stuck in bootloop.
Please I need help to fix the problem
I’m not an expert developer, but I’m not a complete noob either.
This is the first time I have troubles with a brand new Xiaomi Phone.
It’s the first time I get a very expensive phone, but had no choice (they are getting very expensive), because I always buy a Flagship Xiaomi to get all the community support possible.
And I had to change the ROM to Xiaomi.eu, because the Official Global ROM is full of bloatware I had a good experience with Xiaomi.eu ROMs with my old Xiaomi Mi 4 and Mi 5.
At this point I don’t mind going back to stock MIUI Global ROM.
I suppose that with access to boot loader I can flash the Official ROM from PC with MiFlash2020-3-14-0? If it’s the case can somebody show me detailed steps to do that?
For Mi 10 Official Global there is the Stable Full ROM (miui_UMIGlobal_V11.0.2.0.QJBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBMIXM_20200328.0000.00_10.0_global_09b168ff9e) (3.76 GB). Which One to flash from PC with MiFlash?
I can’t afford to hard brick the device
Thank you very much.
Click to expand...
Click to collapse
try this
format data
reboot recovery
connect phone to pc
put zip file ro phone
wipe cache an dalvik cache
install zip
wipe again
reboot recovery
wipe again
go to reboot
power off the phone
now wen its shut down power it on
an it shut boot
it will take a litle time
andromomo said:
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.JBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBM
Thank you very much.
Click to expand...
Click to collapse
hi didt it work for u
IT WORKED properly like a charm!!!
Dear -fluffy-,
Thank you very much for your quick reply.
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
---------- Post added at 12:57 PM ---------- Previous post was at 12:47 PM ----------
Dear -fluffy-,
Thank you very much for your quick reply.
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
---------- Post added at 01:15 PM ---------- Previous post was at 12:57 PM ----------
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
Quick questions, do netflix and google pay work after the flash?
tott2003 said:
Quick questions, do netflix and google pay work after the flash?
Click to expand...
Click to collapse
yes
cedric3320 said:
4 step:
THIS ONE OF THE MUST IMPORTANT STEP
In twrp menu you have to go in Wipe data on choose format data
Click to expand...
Click to collapse
Hello,
i have a silly question about step 4:
someone says we should "Wipe Data", someone says we should "Format Data" ,
i don't see a real difference unless we want to change the filesystem type.
Advices ?
And also, when we format ( or wipe ) the "Data" partition, are we formatting the 256 GB partition ?
if yes, this is a really huge drawback for us who want to change ROM more frequently than other android users, because we have to backup a 256 GB partition ...
This is not fast to do online ( at least with my poor connection ) and it is not fast to do on PC or on a USB KEY.
So we have 256 GB and we need to format at each ROM change ? Too bad ...
In the good old times i did extract my microSD card and i was safe .
Someone could explain me please ?
thank you all for your patience...
adario73 said:
Hello,
i have a silly question about step 4:
someone says we should "Wipe Data", someone says we should "Format Data" ,
i don't see a real difference unless we want to change the filesystem type.
Advices ?
And also, when we format ( or wipe ) the "Data" partition, are we formatting the 256 GB partition ?
if yes, this is a really huge drawback for us who want to change ROM more frequently than other android users, because we have to backup a 256 GB partition ...
This is not fast to do online ( at least with my poor connection ) and it is not fast to do on PC or on a USB KEY.
So we have 256 GB and we need to format at each ROM change ? Too bad ...
In the good old times i did extract my microSD card and i was safe .
Someone could explain me please ?
thank you all for your patience...
Click to expand...
Click to collapse
Hello,
You have to format data the first time you flash xiaomi.eu rom because their rom is base on Chinese firmware (if you don't or just wipe it will not boot)
Each time you will flash a rom with different base (from Chinese base to global base or global to Chinese) you will have to format data !!
You format data to remove encryption.
tott2003 said:
Quick questions, do netflix and google pay work after the flash?
Click to expand...
Click to collapse
Google pay isn't working as the safety net doesn't pass on stable realeses, someone made it to work on betas but I had no luck though
Stuck without solutions
Hello,
I tried to flash the latest miui 12. I followed all the steps...
But now I can't acess recovery nor rom.
Basically when i try to flash TWRP with bootloader it just goes back to fastboot.
Also note that the flash is successful. But I somehow can't acess TWRP, just goes back to fastboot
And when I flash the experimental TWRP on the dev thread it boots to recovery but asks for a password.. Impossible to flash anything.. Even after I formated data and everything
I tried flashing other TWRP I found but nothing boots even after trying a lot of time.
I tried <fastboot boot recovery.img> as well
I tried <fastboot erase recovery> and then flash the TWRP as well
I've been trying hard for the last 8 hours.
I also have a backup of when I had MIUI 12. But impossible to flash it with the only recovery I can boot to.
I feel so desperate. I'm out of ideas.
If you have any ideas, I'm listening
Thanks for the help guys.
Dallee said:
Hello,
I tried to flash the latest miui 12. I followed all the steps...
But now I can't acess recovery nor rom.
Basically when i try to flash TWRP with bootloader it just goes back to fastboot.
Also note that the flash is successful. But I somehow can't acess TWRP, just goes back to fastboot
And when I flash the experimental TWRP on the dev thread it boots to recovery but asks for a password.. Impossible to flash anything.. Even after I formated data and everything
I tried flashing other TWRP I found but nothing boots even after trying a lot of time.
I tried <fastboot boot recovery.img> as well
I tried <fastboot erase recovery> and then flash the TWRP as well
I've been trying hard for the last 8 hours.
I also have a backup of when I had MIUI 12. But impossible to flash it with the only recovery I can boot to.
I feel so desperate. I'm out of ideas.
If you have any ideas, I'm listening
Thanks for the help guys.
Click to expand...
Click to collapse
an what is the latest miui12 u try to flash
Ok so fresh out the box, unlocked bootloader etc.
I have twrp running finally, and have gone through following the steps format/wipe etc.
flashed several differant roms to just try and get one to boot. every reboot it will automatically go into twrp..
I have tried Arrow, Lineage, pixel experience and all of them result in the same mi bootloop and automatically booting twrp.
im following the arrow install instructions :
New build required to be on MIUI Q firmware part (Recommended V12.0.1.0).
Use TWRP.
Make FULL WIPE (system/vendor/data/dalvik/cache) and FORMAT DATA - YES.
Flash ROM (link in first post)
Flash gapps, if need for VANILLA buildtype.
Reboot
when i flash the Xiaomi eu 12.0.1.0 as suggested... twrp bootloop.
so i am sitting with a device going between Mi screen and recovery only. I have no system ?
Can someone point me in the right direction.
Hi,
I do a full wipe like the instruction. After that I install the Xiaomi.eu v12 build. When that is installed immediately install Arrow 11 without formatting (and gapps if you choose the VANILLA build). I then don't install magisk or any other root solution and I reboot the device. This worked for me when I installed LineageOS and when I installed Arrow 10 and now 11.
So I first install Xiaomi and than the ROM I want without a format or reboot between them. If you are booted in the rom I then look into a root solution and install that if you want atleast.
Hello,
i have a question about getting into Recovery or maybe i have to install it again?
So i installed twrp following this guide
Install LineageOS on walleye | LineageOS Wiki
wiki.lineageos.org
At first i installed the Lineage OS recovery but wasnt able to flash a ROM with that so i switched and installed twrp.
It was installed to slot A.
I then went ahead and installed an ASOP ROM.
Now the ROM is working fine and i wanted to go into TWRP and do a Backup.
However i cant get into TWRP. Not with key combos nor with adb reboot recovery.
All i get is the fallen Android Robot picture.
I guess i wrote the image to Slot A as well and now have no recovery left.
Do i have to flash TWRP again and this time to Slot B?
I dont wanna brick anything by accident as i have seen some posts where people switched Slots and got bricks / semi bricks.
Thanks for any help or clarification.
Kind Regards
Hello mate, i never reinstalled twrp on my pixel 2 after catching a bootloop after installing it and then flashing magisk so stuck with using fastboot to fastboot boot twrp when I wanted to flash a ROM/mod.
Sounds strange that twrp was only on 1 slot as the twrp installer zip should flash both slots when flashed?
With regard to losing twrp you'll probably find that the new ROMs recovery has overwritten your twrp recovery during the flashing process giving you a stock recovery again (Fallen android). When I was using a 6T which is an A/B slot device you always had to reflash the twrp installer after a ROM flash to keep twrp installed.
I'd check the official twrp thread re backing up with twrp as it did have problems either backing up or restoring last I used it.
Hope that's some help.
Unsure if this is the place since its also related to TWRP 3.7, any help is appreicated
Got stuck in a weird situation and wondering if anyone has ideas.
Current State:
Slot_A on OOS 11, can boot TWRP via Fastboot
Slot_B on OOS 12, can only boot into Fastboot
Originally on OOS 11, booted TWRP and made backups of all partitions (data, boot, system image, vendor image, etc.). Forgot to move this to computer so this is all still stored on device.
Proceeded with OOS 12 upgrade (into Slot B). Patched magisk, rebooted, then flashed TWRP 3.7 (FBEv1), direct installed magisk, rebooted. - Everything was functional, but decided to go back to OOS 11.
Thinking I could just use the TWRP backup made on OOS 11, I did the following:
Booted into 3.7 TWRP
Restored the backup for boot, system image, and vendor image
Set active slot to Slot A and reboot
It doesn't allow me to boot into the OS (Presumably because the data was re-encrypted for OOS 12?)
Set active-slot=b and reboot, but it's locked to fastboot.
I've attempted a few things, but I can't boot back into OOS. I would prefer to retrieve my TWRP backups first before doing an MSM reset.
When on Slot_A (older), I can only boot into TWRP 3.6.2 and 3.7. I'm guessing 3.6.2 can't decrypt since it's only configured for A11 and under, but not sure why 3.7 can't decrypt my data.
- It doesn't even ask for pin when TWRP launches; maybe it's reading the System for Slot_A and thinks i'm still on A11?
- running `twrp decrypt {pin}` doesn't seem to work. Unsure if there's something done to my lockscreen pin to be used as the encryption key/password?
When on Slot_A, attempting to boot into either the system or TWRP hangs.
Things I've tried:
Flashing A11 boot.img and magisk-patched boot.img to Slot_A -> Hangs on 1+ Spinning dots
Flashing A12 boot.img and magisk-patched boot.img to Slot_B -> Hangs on 1+ logo (Does show up on ADB though)
Booting Slot_B into TWRP 3.6.2 (Official, and Nebrassy unofficial for A12) and TWRP 3.7 -> Gets stuck on "Fastboot Mode" screen (fastboot cli still responds) or Hangs on snapdragon logo
Edit: Ended up using MSM. Needed device for work
I have a similiar problem to flash twrp to my phone ,
each time i try i get a fastboot loop too and i have to reset/unbrick it with the msm tool back to android 11
i use the OnePlus_7_Pro_Global_OxygenOS_11.0.5.1 package to unbrick the phone , i dont know how long and often i tried now to get twrp to work so that i can flash a custom fw ... i want root and a android 13 based cfw but i dont get it to work :/
I got it working with crdroid. heres some stuff
guacamole - Google Drive
drive.google.com
be carefull
¯\_(ツ)_/¯
------------------------------------
I got stable and decrypted fs RW working on crdroid 9.1 firmware other than some weird bugs
i put it in the 2023-twrp
MissAnthropin said:
I have a similiar problem to flash twrp to my phone ,
each time i try i get a fastboot loop too and i have to reset/unbrick it with the msm tool back to android 11
i use the OnePlus_7_Pro_Global_OxygenOS_11.0.5.1 package to unbrick the phone , i dont know how long and often i tried now to get twrp to work so that i can flash a custom fw ... i want root and a android 13 based cfw but i dont get it to work :/
Click to expand...
Click to collapse
I have the exact same problem! Have you found a fix yet? This seems to happen when I try to install Android 13 based roms, and when I install a rom like Lineage OS, using their recovery, it works just fine.
No, and I don't know why, maybe i do something wrong or it is the Modell that make this trouble.
I thinking to sell my OP7PRO and buy another one ( and then I have the same problem with the new phone )
No no let the jokes aside, it must work, i mailed with OnePlus Support Germany but they only helped me to install A11 w/root and recovery, i thought ok now I can update to A13 so I loaded A13, unpacked the boot.img, Patched the boot.img
Installed A13 w/out errors, rebooted - Fastboot loop
RIP
Started ranting instead
TWRP for guacamole development seems to be fairly scarce, last working recovery I tried was when they started using fastboot boot to enter it. It was pretty hacky even then, currently it seems that nebrassy is the maintainer for twrp for guacamole.
Github: https://github.com/nebrassy Android 12 thread: https://forum.xda-developers.com/t/recovery-12-official-teamwin-recovery-project.4269551/ Nebrassys Telegram has helpful info as well: https://t.me/NSSFB
last update I found was 2022:10:2 - https://www.pling.com/s/Phones/p/1835156
after a few days of torture I read a thread on here saying if you flashed twrp via magisk like you would if it was a magisk moule it would work normally. It worked on my device so I assume that its universal. I have filled my computer with guacamole related files Im uploading here before im forced to reinstall my os:
guacamole - Google Drive
drive.google.com
Just a fyi from what I have gathered from my experience you can get a stable twrp recovery with persistant / read write access and disabled encryption and basically use it with little error up until you try flashing a newer custom rom. My guess is when flashing a cfw the bootloader gets rewritten causing our boot image to become corrupted. Flashing twrp over / booting to twrp via fastboot or trying to install it via another custom recovery causes boot / recovery failures... meaning you cant really use it for flashing custom roms. I cant find the post with the install instructions I seen that helped me so here is what I think it was,
Found it: https://forum.xda-developers.com/t/how-to-make-twrp-work-in-your-stock-a12.4522667/#post-87985325
~ I have bricked this device constantly while ****ing around so unless youre prepared to go to war with the ****er, Id quit messing with it.
MSM flashing with windows is the only way to recover from the void.
Click to expand...
Click to collapse
using Linux systems for EDL is a bit more difficult to figure out but can be done > EDL https://github.com/bkerler/edl/blob/master/edl | https://github.com/andersson/qdl
Click to expand...
Click to collapse
~If you do brick I created a fastboot flashable A13 Oxygen os recovery rom and uploaded it to my google drive found under recovery_brick_fastboot.zip ~
Click to expand...
Click to collapse
lastly be mindful of a/b partition configuration or youll find yourself lost or bricked
Installation:
1. Obviously unlock the bootloader - OEM Unlock
2. Flash custom recovery (lineage/crdroid/etc)
3. (Personally I root here and again on the active slot so) flash magisk.zip
4. Reboot into installed ROM and install magisk android app and complete setup, reboot system
5. (another thing I like to do before flashing twrp) setup magisk enable all the basic options like prophide, deny list then set root userspace option to global.
6. Flash TWRP .zip (https://dl.twrp.me/guacamolev2/twrp-installer-3.7.0_12-0-guacamolev2.zip) via magisk
Alright! After all that you should be able to reboot into recovery via adb reboot recovery / fastboot or power menu and you find a working twrp recovery installed.
If you need help or want to **** around with the device you can @ me anytime and ill do my best to halp
2600 IRC (cornelius.scuttled.net >Nick captain >channel #guac)
Telegram https://t.me/+pxvpKToFo6pkMGYx
Discord https://discord.gg/MhvWgEfY
Pics
RolandStoner said:
Pics
Click to expand...
Click to collapse
You Confussing me a lot with your Posts before ...
i´m unsure what you mean exactly,
my bootloader is unlocked, with magisk i got a working root but after that i fail
what you mean with flash twrp with magisk ?
after unlocking the bootloader and get root, i tryd to flash twrp like before on other devices but that seems not working because i get then the fastboot loop
on another thread i found here on xda too, the guy wrote dont forget to activate the fastboot loop fix in the advanced options
but i not tried it yet again , so what should i do now ?
for now , i´m back on android11 , with stock oxygen os firmware
i have to do now the things like i did before again , unpack boot.img from the firmware that is installed on the device
patch it with magisk, flash it with "fastboot flash boot boot-patched.img" or is this step senseless ?
i mean you only wrote unlock bootloader and flash a cfw , but i don´t have a chance to flash a custom fw without a custom recovery ??
my recovery on my op7pro have no options for "install zip" or something else
addendum:
like i said you confused me a lot
addendum two:
or i do what i said before .. i sell my op7pro and buy me a one where i havent so much trouble installing twrp and root
i never had a phone before that made so much trouble in installing simple twrp ...
but i don´t found a phone yet that is compatible with kali and the pentest tools or wardriving tools like the oneplus , so i have a problem ,... i think i should drink now my selfmade blackberry liquor ( or blackberry booze ? ) and let the smartphone be a smartphone for now and power off my brain for a while
Yes, you need to patch your boot image via magisk and flash it with fastboot.
After you let magisk do its first time setup and then once it reboots you go to Magisk > Modules and flash the twrp recovery .zip file you got from twrp. link:https://twrp.me/oneplus/oneplus7pro.html just like you would if it was a magisk module.
the password for twrp decryption is your pin. Here are simpler instructions
https://forum.xda-developers.com/t/how-to-make-twrp-work-in-your-stock-a12.4522667/#post-87985325
****... I forgot a step.
after flashing twrp as a module in magisk you dont reboot, you go back to the main screen hit the install button and choose direct install
Now I understand it more, i had before rooted the phone successful with magisk, but then I made a wrong decision and booted into Fastboot and flashed TWRP in Fastboot Mode as I did it before with all my Smarties i had before, coz those way with Fastboot worked before all the time so I never thought that this is the error in the procedure
I give the twrp flashing with magisk a try.
Thx for the help
MissAnthropin said:
Now I understand it more, i had before rooted the phone successful with magisk, but then I made a wrong decision and booted into Fastboot and flashed TWRP in Fastboot Mode as I did it before with all my Smarties i had before, coz those way with Fastboot worked before all the time so I never thought that this is the error in the procedure
I give the twrp flashing with magisk a try.
Thx for the help
Click to expand...
Click to collapse
Thank @yassine2217 because I would never have done so either.... Still many bugs but twrp is twrp