Ok so fresh out the box, unlocked bootloader etc.
I have twrp running finally, and have gone through following the steps format/wipe etc.
flashed several differant roms to just try and get one to boot. every reboot it will automatically go into twrp..
I have tried Arrow, Lineage, pixel experience and all of them result in the same mi bootloop and automatically booting twrp.
im following the arrow install instructions :
New build required to be on MIUI Q firmware part (Recommended V12.0.1.0).
Use TWRP.
Make FULL WIPE (system/vendor/data/dalvik/cache) and FORMAT DATA - YES.
Flash ROM (link in first post)
Flash gapps, if need for VANILLA buildtype.
Reboot
when i flash the Xiaomi eu 12.0.1.0 as suggested... twrp bootloop.
so i am sitting with a device going between Mi screen and recovery only. I have no system ?
Can someone point me in the right direction.
Hi,
I do a full wipe like the instruction. After that I install the Xiaomi.eu v12 build. When that is installed immediately install Arrow 11 without formatting (and gapps if you choose the VANILLA build). I then don't install magisk or any other root solution and I reboot the device. This worked for me when I installed LineageOS and when I installed Arrow 10 and now 11.
So I first install Xiaomi and than the ROM I want without a format or reboot between them. If you are booted in the rom I then look into a root solution and install that if you want atleast.
Related
I've tried installing PixelExperience 10 on my phone (which is unlocked and with a custom recovery) and first it throw me Error 7, but that was because I hadn't flash the firmware and vendor .zips before PixelExperience, but even flashing that, the device bootloops until a certain point and then it boot back to recovery.
I've tried with dotOS, LineageOS, even MIUI, multiple versions of it, and non of it are working. The device just bootloops with everything.
Fastboot is accesible, recovery is accesible. I'm using OrangeFox Version R10.0_2, but I originally installed TWRP and I had the same problem.
Have you tried flashing TWRP, then using TWRP recovery environment to wipe EVERTHING, then use adb to push lineageOS (since you will have wiped internal data and lost your rom file)
RunNgun42 said:
Have you tried flashing TWRP, then using TWRP recovery environment to wipe EVERTHING, then use adb to push lineageOS (since you will have wiped internal data and lost your rom file)
Click to expand...
Click to collapse
OrangeFox lets me wipe the same partitions (even Vendor, which TWRP doesn't let me).
I'm not sure if I can install Lineage OS thru adb because it asks for MIUI firmware to be installed. If I wipe everything, I loose the firmware.
Althought, I haven't wiped the internal storage in I while, since I have all the roms and zips, there. I'll try with that.
Make "Format Data" - Yes after that wipe data, system, cache and vendor. Copy zips to storage and dont sideload.
Flash fw 9.6.27, los17 and opengapps. Must work.
The way these roms work you basically have to have previously installed a corresponding version of MIUI first. For instance, if you want to install los16 then you must have previously been running MIUI 10. If you want to install los17 then you need to install MIUI 11 first. I guess Xiaomi does some weird stuff to the internal storage between flashes. If you're stuck in a bootloop the easiest thing to do is use the official MiFlash tool to flash the ROM version of your choice. MiFlash uses fastboot rom files. This site has the best catalog of roms
https://xiaomifirmwareupdater.com/miui/
MAKE SURE YOU UNTICK "Clean and lock" at the bottom or else you will relock your bootloader!
Hello Android developers and enthusiasts,
I've been installing ROM since 2011 so I would not call myself a n00b however I seemingly cannot install an Android 10 ROM without issues. So this is a plea for help and advice!
I know you need to have OOS installed before you install a custom ROM so I use Auto Flash ROM to install OOS with Android 9 via System Update. I then boot and set up phone, install update, reboot and then install the OOS android 10 via the System Update. I then have a OOS installed with Android 10.
Why would I use such an elaborate method you may ask? Well, I tried to download latest OOS from OnePlus site and wipe phone and then install OOS but that fails (didn't record the error I'm afraid).
I then download all the ROM + dependencies on an USB stick and use fastboot to flash Mauronofrio TWRP. I then follow the steps in the ROM instructions. For EvolutionX these were:
First Time Install / Clean Flash
- Have OOS 10.3 flashed to both slots!!
- Boot to recovery
- Flash BUILD.zip (TWRP built-in)
- Wipe Cache
- Format data
- Reboot to recovery (optional)
- Flash Magisk.zip (optional)
- Reboot to system & #KeepEvolving
Click to expand...
Click to collapse
I followed these to the letter but when i rebooted system I got a snapdragon error and it wouldn't even boot into TWRP until I used fastboot to flash boot into TWRP. I also tried HavocROM and same happened.
I did manage to install Syberia using above method but I didn't like the ROM that much unfortunately.
Finally, I've also read up a lot on Slot A and B but it still is not very clear to me. I think I understand it but what happens does not confirm my theories
I therefore have some questions:
- Should I be able to wipe my phone and install OOS on a wiped phone and then install a custom ROM?
- When I install ROM and it says "Reboot Recovery" and then install ROM again. But if I check what slot is being used the reboot doesn't seem to change the slot. My assumption was that booting recovery was to install ROM in the other slot. Is that correct?
Any other tips you can give me?
Again, I like to stress I am not new to installing custom ROMs so I am a bit disappointed that this is causing me such grief.
Following some answers I will retry tomorrow so I can give some more details if needed. For now, appreciate any help.
roel1976 said:
Hello Android developers and enthusiasts,
I've been installing ROM since 2011 so I would not call myself a n00b however I seemingly cannot install an Android 10 ROM without issues. So this is a plea for help and advice!
I know you need to have OOS installed before you install a custom ROM so I use Auto Flash ROM to install OOS with Android 9 via System Update. I then boot and set up phone, install update, reboot and then install the OOS android 10 via the System Update. I then have a OOS installed with Android 10.
Why would I use such an elaborate method you may ask? Well, I tried to download latest OOS from OnePlus site and wipe phone and then install OOS but that fails (didn't record the error I'm afraid).
I then download all the ROM + dependencies on an USB stick and use fastboot to flash Mauronofrio TWRP. I then follow the steps in the ROM instructions. For EvolutionX these were:
I followed these to the letter but when i rebooted system I got a snapdragon error and it wouldn't even boot into TWRP until I used fastboot to flash boot into TWRP. I also tried HavocROM and same happened.
I did manage to install Syberia using above method but I didn't like the ROM that much unfortunately.
Finally, I've also read up a lot on Slot A and B but it still is not very clear to me. I think I understand it but what happens does not confirm my theories
I therefore have some questions:
- Should I be able to wipe my phone and install OOS on a wiped phone and then install a custom ROM?
- When I install ROM and it says "Reboot Recovery" and then install ROM again. But if I check what slot is being used the reboot doesn't seem to change the slot. My assumption was that booting recovery was to install ROM in the other slot. Is that correct?
Any other tips you can give me?
Again, I like to stress I am not new to installing custom ROMs so I am a bit disappointed that this is causing me such grief.
Following some answers I will retry tomorrow so I can give some more details if needed. For now, appreciate any help.
Click to expand...
Click to collapse
Hi!
I had this exact same problem a couple months ago. Rebooting to recovery used to change slots for me, but then it stopped.
What you can do is change active slot manually on Reboot section. By doing this, you don't even have to reboot to recovery in other to flash the other slot (altough I do it just to be safe).
And remember: the rom is flashed on the inactive slot, so after the final flash you gotta change slots one more time.
When you flash one ROM on top of another different ROM, particularly OOS to custom, always wipe data and not format data, because some custom ROMs do not support being unencrypted in the first time and then encrypt on the first boot. So do it like this:
Flash OOS
Flash TWRP
Reboot recovery
Flash OOS
Flash TWRP
Reboot system
Complete initial setup
Reboot to recovery
Wipe (not format) data
Flash custom ROM (start here for dirty flashing ROM update)
Flash TWRP
Reboot recovery
Flash custom ROM
Flash TWRP
Reboot recovery
Flash Magisk
Reboot system
I don't like built-in TWRP in custom ROMs. I always use @mauronofrio's TWRP. So regardless if the custom ROM I'm using has TWRP built-in or not, I always use the method above. I didn't have a problem with installing ROMs using his TWRP. Slots always switch when flashing ROM.
Thanks for the info, it really helps.
One question: in your experience can you wipe your phone and then installl OOS on the wiped phone?
So I just booted into TWRP, did standard wipe action: Data, Cache, and Dalvik. I then try to flash the latest OOS zip and I then get this error:
Error applying update: 7 (ErrorCode::kInstallDeviceOpenError)
Updater process ended withL ERROR: 1.
Error installing zip file: '/usbstorage/00, INSTALL/OnePlus6Oxygen_22_OTA_044_all_2002220042_a46425f1bfe43d2.zip
FIXED: I was using TWRP 3.3.1.11 and I then found out there was a newer version: 3.3.1.18 which you can get here: https://sourceforge.net/projects/mauronofrio-twrp/files/Enchilada/
I am now able to install OOS from scratch (ie wiped phone).
remewer said:
When you flash one ROM on top of another different ROM, particularly OOS to custom, always wipe data and not format data, because some custom ROMs do not support being unencrypted in the first time and then encrypt on the first boot. So do it like this:
Flash OOS
Flash TWRP
Reboot recovery
Flash OOS
Flash TWRP
Reboot system
Complete initial setup
Reboot to recovery
Wipe (not format) data
Flash custom ROM (start here for dirty flashing ROM update)
Flash TWRP
Reboot recovery
Flash custom ROM
Flash TWRP
Reboot recovery
Flash Magisk
Reboot system
I don't like built-in TWRP in custom ROMs. I always use @mauronofrio's TWRP. So regardless if the custom ROM I'm using has TWRP built-in or not, I always use the method above. I didn't have a problem with installing ROMs using his TWRP. Slots always switch when flashing ROM.
Click to expand...
Click to collapse
I tried this method and everytime I can't seem to flash oos onto the other slot because when it reboots to recovery the folder is encrypted so I can't see which file is the zip. How do I flash the seccond OOS if it shows up encrypted in TWRP.
I have a OnePLus 6 with the latest OOS now because I got into boot loop and i used a flash-all.bat to get back to stock. I also use maronofrio's twrp because that works.
harshybar said:
I tried this method and everytime I can't seem to flash oos onto the other slot because when it reboots to recovery the folder is encrypted so I can't see which file is the zip. How do I flash the seccond OOS if it shows up encrypted in TWRP.
I have a OnePLus 6 with the latest OOS now because I got into boot loop and i used a flash-all.bat to get back to stock. I also use maronofrio's twrp because that works.
Click to expand...
Click to collapse
If you can boot OOS fine, try to do a local update so that both slots have OOS. Then try to flash a custom ROM again using the method I've mentioned.
remewer said:
If you can boot OOS fine, try to do a local update so that both slots have OOS. Then try to flash a custom ROM again using the method I've mentioned.
Click to expand...
Click to collapse
When you say local update you mean while I am running the rom, go to settings then do update from local source?
harshybar said:
When you say local update you mean while I am running the rom, go to settings then do update from local source?
Click to expand...
Click to collapse
Exactly
GuestD2559 said:
When you flash one ROM on top of another different ROM, particularly OOS to custom, always wipe data and not format data, because some custom ROMs do not support being unencrypted in the first time and then encrypt on the first boot. So do it like this:
Flash OOS
Flash TWRP
Reboot recovery
Flash OOS
Flash TWRP
Reboot system
Complete initial setup
Reboot to recovery
Wipe (not format) data
Flash custom ROM (start here for dirty flashing ROM update)
Flash TWRP
Reboot recovery
Flash custom ROM
Flash TWRP
Reboot recovery
Flash Magisk
Reboot system
I don't like built-in TWRP in custom ROMs. I always use @mauronofrio's TWRP. So regardless if the custom ROM I'm using has TWRP built-in or not, I always use the method above. I didn't have a problem with installing ROMs using his TWRP. Slots always switch when flashing ROM.
Click to expand...
Click to collapse
@Cypher_01, Try this guide. This worked for me. I did not reinstall Nikgapps. Maybe that's where the problem lies? Don't forget to change the update slot at the end before you restart.
I was on crDroid, and other aosp ROMs for a month, but yesterday I wanted to test MIUI 12, so I flashed CN Closed Beta miui 12, I installed miui_PHOENIX_20.5.28_ef1f0d470e_10.0! It doesn't include Gapps so I decided to install xiaomi.eu build. It stuck on Bootanimation. I couldn't go back to TWRP and install something else cause TWRP won't show any storage or data partition ( It's happening now again and again after I install any AOSP or MIUI ROM) To recover from bootloop I downloaded fastboot image (phoenix_images_V11.0.15.0.QGHCNXM) to flash with XiaomiFlash Tool. Successfully unbricking the device, I try to install EU build again but it won't just boot. And also I can't use twrp data partition again cause it somehow breaks all the partitions. I have to reflash fastboot image. I even tried to go back on Indian Build of POCO X2 but due to anti-rollback check it fails again and again. I can't boot any AOSP rom, tried a few, nor even EU builds or Indian Builds. I can only Install MIUI 12 Closed Beta or MIUI 11 stable both Chinese roms. What Went wrong and how to install AOSP roms again or flash EU builds?
Jyotirmay Goldsmith said:
I was on crDroid, and other aosp ROMs for a month, but yesterday I wanted to test MIUI 12, so I flashed CN Closed Beta miui 12, I installed miui_PHOENIX_20.5.28_ef1f0d470e_10.0! It doesn't include Gapps so I decided to install xiaomi.eu build. It stuck on Bootanimation. I couldn't go back to TWRP and install something else cause TWRP won't show any storage or data partition ( It's happening now again and again after I install any AOSP or MIUI ROM) To recover from bootloop I downloaded fastboot image (phoenix_images_V11.0.15.0.QGHCNXM) to flash with XiaomiFlash Tool. Successfully unbricking the device, I try to install EU build again but it won't just boot. And also I can't use twrp data partition again cause it somehow breaks all the partitions. I have to reflash fastboot image. I even tried to go back on Indian Build of POCO X2 but due to anti-rollback check it fails again and again. I can't boot any AOSP rom, tried a few, nor even EU builds or Indian Builds. I can only Install MIUI 12 Closed Beta or MIUI 11 stable both Chinese roms. What Went wrong and how to install AOSP roms again or flash EU builds?
Click to expand...
Click to collapse
After you install xiaomi.eu rom, if you are stuck at boot logo, try this
1. flash twrp again with fastboot mode and boot into twrp
2. format data partition ( you lose all data)
3. now flash xiaomi.eu rom again and reboot
AdrenalineX said:
After you install xiaomi.eu rom, if you are stuck at boot logo, try this
1. flash twrp again with fastboot mode and boot into twrp
2. format data partition ( you lose all data)
3. now flash xiaomi.eu rom again and reboot
Click to expand...
Click to collapse
When I flash any rom now, it stucks to bootloop and I can't format or flash anything on top of that, I have to flash fastboot images of Chinese Rom 11.0.15 through xiaomiflashtool, all rooms are stuck to bootanimation except miui12 CN ROM.
AdrenalineX said:
After you install xiaomi.eu rom, if you are stuck at boot logo, try this
1. flash twrp again with fastboot mode and boot into twrp
2. format data partition ( you lose all data)
3. now flash xiaomi.eu rom again and reboot
Click to expand...
Click to collapse
Remove the first few lines from the flash all.bat which does not begin with'fastboot' to overcome ARB.
i am facing the same problem after i tried to update 12.6 to 12.7 of bliss rom, found any fix?
SOLVED
checkout this thread https://forum.xda-developers.com/poco-x2/help/11-0-15-0-to-poco-x2-11-0-7-0-t4095185
I face problem with one plus 7 pro....
I root the phone and then install latest twrp temporally at that time my op7 running os android 10 last version,
then I decided to install custom ROM lineage os 18.1 I install only zip file through twrp..
(wipe>advance wipe> 1st 4 part wipe and then home again).
Normal install find the zip file and flash,
go back twrp home and reboot to system while twrp say reboot to install remain zip file and also say no os install when I go to reboot to system.
now the issue is I have no gapps and twrp also lost root..
What is the possible process to install the twrp permanent and also gapps or other custom room..???? ans plzzzzzzz
Hello everyone sorry i'm new here and also i don't know much about rooting my device Poco X 3 pro MIUI 13.0.3 Global and Andriod 12 .. sadly i messed up i had my boatloader unlocked fo my Poco x3 pro and i have installed custom recovery TWRP then i tried to install Magisk via the TWRP recovery but it won't work mainly because the data is encrypted and the TWRP can't acess in the internal storage so i used a OTG usb but gets error unable to mount /data/media/fox/.fox note that i tried both Orangefox and twrp still same error i assume its because the device is encrypted . also decrypt doesnt work it ask for password and i even removed all my accounts and disabled all lock screen but still not working at this point i thought that downgrading from MIUI 13 to 12 will fix this since i saw all videos who had it working used MIUI 12 and here where i messed up i used XiaoMiTool V2 then clicked custom ROM and used an offecial ROM from Xiaomi website ( miui_VAYUGlobal_V12.0.6.0.RJUMIXM_eccd7da42b_11.0.zip ) the phone booted into TWRP and started installing but ofcourse got the error first unable to mount /data/media/twrp then the process continued installing all the files then phone rebooted into TWRP LOOP now im stuck into TWRP and the USB debugging is turned off now as the phone appearntly did factory reset so i cant acess XiaoMiTool V2 again and when i try to wipe data from TWRP it says unable to wipe data ... please help im stuck on TWRP loop now
**UPDATE** i tried fastboot ROM using MiFlash tool but i get error since i'm stuck on twrp fastboot menue but after few restart it finally open the normal fastboot menue with the logo of the sitting rabbit which indecade this is miui 12 tried again to fash though Mifash tool and it worked (flashing the same version miui_VAYUGlobal_V12.0.6.0.RJUMIXM_eccd7da42b_11.0.zip but this time the fastboot version not the recovery one took few minutes then got error not catch checkpoint flash is not done then it reboot into the phone menue where i can click wipe data i click that and the phone (thankfully) opened into MIUI 12 LOGO screen
... theres an easier way to actually downgrade your MIUI using a trick through your phone only without root or pc or anything by changing the ROM file name before you click reboot wish i used that since its safer and official
omg finally Magisk installed successfully now didnt need to decrypt anything
now my last question is do i need custom ROM after rooting the device ? or does magisk mean its a custom root ? sorry first time rooting and i dont know if i need to install any apps or apply any setting or should i click update my MIUI now ?
Try the newest Unofficial TWRP from nebrassy (found in his thread here on XDA)
That supports decription.
I recommend arrowOS as custom ROM.
It's one of the oldest and works pretty well.
IMHO Stock ROM from Xiaomi is untrustworthy. Who knows what spyware they included.
Same for me now I have a question first I need a guide link how to install arrowOS or any better ROM also if I do that do I need to flash Magisk again or the device will be keep the Root ?
@Haldi4803 can you post the link of the TWRP as well ? There's many threads by nebrassy and they all seem old mine is the latest official and it doesn't work on miui 13 , I also heard of crdroid and derpfest ROMs for Poco x3 pro but I think they overheat much ? I didn't test so I'm just asking also what's the way to install a new ROM it seem little bit complicated but the ArrowOs thread doesn't explain all the steps in detail because I think it's for pro users I read on Google that there's way more steps to install a ROM
TWRP:
[RECOVERY] [12] [OFFICIAL] TeamWin Recovery Project
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
Unofficial Builds from pling with Decryption working:
https://www.pling.com/p/1833617/ (just take the newer one)
Installation guide for Arrow OS:
Instructions
FIRST INSTALL?:
Remove any fingerprint, PIN, or password in MIUI
Unlock the bootloader
Transfer ROM to internal storage
Install any suitable recovery
Flash ROM zip file
Do a data wipe in recovery (format data)
Reboot to the system, wait and enjoy
There are decent picture guides here on xda on how to unlock bootloader.
After bootloader is unlocked you can simply install TWRP via fastboot flash recovery recovery.img.
Detailed instructions here: https://twrp.me/xiaomi/xiaomipocox3pro.html
After you have installed a ROM. and gapps you can simply reboot and use the rom.
Whenever you need root you can reboot into recovery and install magisk.