Ultimate guide to install stable or Dev rom from Xiaomi.eu - Xiaomi Mi 10 Guides, News, & Discussion

Hello everyone,
First of all, rom and recovery are not from me... I just want to make a full guide to help you
So let's go !!!!!
1 step: unlock bootloader
https://en.miui.com/unlock/
BE CAREFUL unlocking your bootloader will erase all your data (internal storage) so don't forget to make a backup
2 step: flash twrp recovery
Download the recovery image from here
https://drive.google.com/file/d/1-1CSfT4lQwFZngu6RI9eowLA9CmEMEPw/view?usp=drivesdk
Be sure to have adb and fastboot tools on your computer ... If not take a look at here
https://forum.xda-developers.com/showthread.php?t=2317790
Past TWRP_umi.img on minimal adb and fastboot directory.
Open a cmd here.
Enable usb debugging on your device
Reboot your phone on bootloader (hold volume down + power), connect it to PC and tape:
fastboot devices
fastboot flash recovery TWRP_umi.img
Then tape fastboot reboot while holding volume up button on your devices to reboot in recovery
3 step:
At the first launch of Twrp You have to choose SWIPE TO ALLOW MODIFICATION
4 step:
THIS ONE OF THE MUST IMPORTANT STEP
In twrp menu you have to go in Wipe data on choose format data
Otherwise the ROM will not boot.
5 step:
Reboot into recovery from twrp.
6 step:
Connect your phone to your PC and paste the xiaomi.eu ROM of your choice (stable or Dev)
7 step:
Flash ROM from recovery
8 step:
REBOOT AND ENJOY :good::good::good:

Does Xiaomi EU Rom run either on encrypted and unencrypted storage?

I cant get this to work, ive been trying everything for hours. I am sure i am missing something stupid but if anyone has any new ideas please let me know. I unlocked my device today, flashed twrp via fastboot, rebooted to recovery, formatted data then went on to install xiaomi eu rom. Ever since trying this, i am constantly booting into recovery or hitting a boot loop. i have formatted data more times than i care to think of ha ha. ive tried flashing the latest fastboot rom via mi unlock tool to do a fresh start but keep getting ''flash crclist error". Ive also tried flashing miui stock via twrp and it also, doesn't boot. ive tried many combinations in between. My next option is to try the fastboot global rom (though i believe i have a chinese device), i am waiting for it to download. If anyone knows what i am doing wrong i will be eternally grateful if you can tell me what it is. I'm so frustrated, been flashing roms for years, never had anything take as long as this :crying:

carolef1984 said:
I cant get this to work, ive been trying everything for hours. I am sure i am missing something stupid but if anyone has any new ideas please let me know. I unlocked my device today, flashed twrp via fastboot, rebooted to recovery, formatted data then went on to install xiaomi eu rom. Ever since trying this, i am constantly booting into recovery or hitting a boot loop. i have formatted data more times than i care to think of ha ha. ive tried flashing the latest fastboot rom via mi unlock tool to do a fresh start but keep getting ''flash crclist error". Ive also tried flashing miui stock via twrp and it also, doesn't boot. ive tried many combinations in between. My next option is to try the fastboot global rom (though i believe i have a chinese device), i am waiting for it to download. If anyone knows what i am doing wrong i will be eternally grateful if you can tell me what it is. I'm so frustrated, been flashing roms for years, never had anything take as long as this :crying:
Click to expand...
Click to collapse
try rhis
format data (not wipe)
put rom.zip unto ur internal storage
wipe cache an dalvik cache
now flash the zip
now reboot to recovery
wipe cache an dalvik cache
an now go to reboot menu
an now power off
an now power it on

-fluffy- said:
try rhis
format data (not wipe)
put rom.zip unto ur internal storage
wipe cache an dalvik cache
now flash the zip
now reboot to recovery
wipe cache an dalvik cache
an now go to reboot menu
an now power off
an now power it on
Click to expand...
Click to collapse
Thank you for trying to help, unfortunately it just rebooting to my recovery still. I dont suppose anyone has any other ideas do they please I cant understand what on earth ive done wrong. Does anyone know why mi flash tool comes up with that error (flash crc list error)? qualcomm drivers are installed.

carolef1984 said:
Thank you for trying to help, unfortunately it just rebooting to my recovery still. I dont suppose anyone has any other ideas do they please I cant understand what on earth ive done wrong. Does anyone know why mi flash tool comes up with that error (flash crc list error)? qualcomm drivers are installed.
Click to expand...
Click to collapse
write what u do wen u try to flash the zip
an have u downloadet the correct zip file

Thanks everyone, i think it must have been something to do with the qualcomm drivers installed incorrectly. i have re-done that from scratch and managed to get mi flash tool working. Sorry to waste everyones time.

Greetings
I have followed the tutorials to perfection like 2-3 times and I still face the same issue
I always go back to TWRP after trying to boot into system.
I have tried 2 different recovery files
The experimental one asks for a password. and the other one works but keeps going back to recovery after flashing.
MIUI 11 rom
MIUI 12 rom
No matter what I do It keeps going back to recovery.
It's my only device so I truly need help.
I have tried re installing everything already.
At this point I just want to install stock rom and keep using it without flashing anything please help.
PHONE FINALLY REBOOTING INTO SYSTEM. I myself don't know what i did!!!

Bootloop (stuck on 5G logo) after flashing Xiaomi.eu ROM
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.
The problems started when I tried to install Xiaomi.eu Custom ROM : xiaomi.eu_multi_MI10_V11.0.25.0.QJBCNXM_v11-10
Downloaded the Xiaomi.eu ROM to PC, then copied to the Download folder of the Phone.
Started phone in upload mode or TWRP. > Wipe > Swipe to Factory Reset + Format Data.
When formatting data I erase all folders in the phone, including the Xiaomi.eu ROM copied in the Download folder.
Some tutorials suggest to copy the Xiaomi.eu ROM from PC to phone after formatting the data, just by connecting the phone in TWRP to the PC, by going to > Mount and enabling MTP.
Tried this method but when I send the Xiaomi.eu ROM file to the phone the progress bas doesn’t move.
So I restarted the phone, without installing the Custom ROM, went through all the screens of initial phone configuration. Lost Magisk and root (but I supposed that it’s not mandatory to install Custom ROM). Copied again the Xiaomi.eu ROM zip file to the Download folder. Rebooted to TWRP. This time I just did Factory Reset but without Format Data. Then > Install to install the Xiaomi.eu new ROM. Cleared Dalvik Cache then reboot.
PROBLEM : bootloop. Stuck with the 5G logo forever, waited more than 30 min, no change.
Still have access to recovery TWRP and to bootloader mode. I suppose this is a soft brick?
I did > Wipe, Swipe to Factory Reset + Format Data, restarted… no change.
Copied this time the Xiaomi.eu ROM to a clean formatted (FAT32) USB drive. As shown in some tutorials, you can us an external USB drive via USB OTG to install the Custom ROM via TWRP.
Factory Reset + Format Data, then I installed again the same Xiaomi.eu ROM from the external USB. Still stuck in bootloop.
Please I need help to fix the problem
I’m not an expert developer, but I’m not a complete noob either.
This is the first time I have troubles with a brand new Xiaomi Phone.
It’s the first time I get a very expensive phone, but had no choice (they are getting very expensive), because I always buy a Flagship Xiaomi to get all the community support possible.
And I had to change the ROM to Xiaomi.eu, because the Official Global ROM is full of bloatware I had a good experience with Xiaomi.eu ROMs with my old Xiaomi Mi 4 and Mi 5.
At this point I don’t mind going back to stock MIUI Global ROM.
I suppose that with access to boot loader I can flash the Official ROM from PC with MiFlash2020-3-14-0? If it’s the case can somebody show me detailed steps to do that?
For Mi 10 Official Global there is the Stable Full ROM (miui_UMIGlobal_V11.0.2.0.QJBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBMIXM_20200328.0000.00_10.0_global_09b168ff9e) (3.76 GB). Which One to flash from PC with MiFlash?
I can’t afford to hard brick the device
Thank you very much.

andromomo said:
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.
The problems started when I tried to install Xiaomi.eu Custom ROM : xiaomi.eu_multi_MI10_V11.0.25.0.QJBCNXM_v11-10
Downloaded the Xiaomi.eu ROM to PC, then copied to the Download folder of the Phone.
Started phone in upload mode or TWRP. > Wipe > Swipe to Factory Reset + Format Data.
When formatting data I erase all folders in the phone, including the Xiaomi.eu ROM copied in the Download folder.
Some tutorials suggest to copy the Xiaomi.eu ROM from PC to phone after formatting the data, just by connecting the phone in TWRP to the PC, by going to > Mount and enabling MTP.
Tried this method but when I send the Xiaomi.eu ROM file to the phone the progress bas doesn’t move.
So I restarted the phone, without installing the Custom ROM, went through all the screens of initial phone configuration. Lost Magisk and root (but I supposed that it’s not mandatory to install Custom ROM). Copied again the Xiaomi.eu ROM zip file to the Download folder. Rebooted to TWRP. This time I just did Factory Reset but without Format Data. Then > Install to install the Xiaomi.eu new ROM. Cleared Dalvik Cache then reboot.
PROBLEM : bootloop. Stuck with the 5G logo forever, waited more than 30 min, no change.
Still have access to recovery TWRP and to bootloader mode. I suppose this is a soft brick?
I did > Wipe, Swipe to Factory Reset + Format Data, restarted… no change.
Copied this time the Xiaomi.eu ROM to a clean formatted (FAT32) USB drive. As shown in some tutorials, you can us an external USB drive via USB OTG to install the Custom ROM via TWRP.
Factory Reset + Format Data, then I installed again the same Xiaomi.eu ROM from the external USB. Still stuck in bootloop.
Please I need help to fix the problem
I’m not an expert developer, but I’m not a complete noob either.
This is the first time I have troubles with a brand new Xiaomi Phone.
It’s the first time I get a very expensive phone, but had no choice (they are getting very expensive), because I always buy a Flagship Xiaomi to get all the community support possible.
And I had to change the ROM to Xiaomi.eu, because the Official Global ROM is full of bloatware I had a good experience with Xiaomi.eu ROMs with my old Xiaomi Mi 4 and Mi 5.
At this point I don’t mind going back to stock MIUI Global ROM.
I suppose that with access to boot loader I can flash the Official ROM from PC with MiFlash2020-3-14-0? If it’s the case can somebody show me detailed steps to do that?
For Mi 10 Official Global there is the Stable Full ROM (miui_UMIGlobal_V11.0.2.0.QJBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBMIXM_20200328.0000.00_10.0_global_09b168ff9e) (3.76 GB). Which One to flash from PC with MiFlash?
I can’t afford to hard brick the device
Thank you very much.
Click to expand...
Click to collapse
try this
format data
reboot recovery
connect phone to pc
put zip file ro phone
wipe cache an dalvik cache
install zip
wipe again
reboot recovery
wipe again
go to reboot
power off the phone
now wen its shut down power it on
an it shut boot
it will take a litle time

andromomo said:
Dear fellow XDA-dev community members,
Xiaomi Mi 10 (umi), coming from original stock ROM, MIUI 11 GLOBAL version V11.0.2.0.QJBMIXM.
Bootloader unlocked official way via MiFlash Unlock 4.5.514.47.
Custom recovery TWRP 3.4.1b-0313 installed via XiaoMiTool V2.
Tested root by installing Magisk 20.3 via TWRP, no problem, then updating to Magisk 20.4 with the Magisk Manager 7.5.1.JBMIXM_4f986c08cb_10.0 ) (2.45 GB) and Stable ROM (umi_global_images_V11.0.2.0.QJBM
Thank you very much.
Click to expand...
Click to collapse
hi didt it work for u

IT WORKED properly like a charm!!!
Dear -fluffy-,
Thank you very much for your quick reply.
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
---------- Post added at 12:57 PM ---------- Previous post was at 12:47 PM ----------
Dear -fluffy-,
Thank you very much for your quick reply.
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.
---------- Post added at 01:15 PM ---------- Previous post was at 12:57 PM ----------
I followed precisely your instructions. I was able to copy de ROM zip file from PC to the phone (the transfer bas went smoothly, as opposite as before).
IT WORKED properly like a charm!!!
Booting the phone took me 2 min.

Quick questions, do netflix and google pay work after the flash?

tott2003 said:
Quick questions, do netflix and google pay work after the flash?
Click to expand...
Click to collapse
yes

cedric3320 said:
4 step:
THIS ONE OF THE MUST IMPORTANT STEP
In twrp menu you have to go in Wipe data on choose format data
Click to expand...
Click to collapse
Hello,
i have a silly question about step 4:
someone says we should "Wipe Data", someone says we should "Format Data" ,
i don't see a real difference unless we want to change the filesystem type.
Advices ?
And also, when we format ( or wipe ) the "Data" partition, are we formatting the 256 GB partition ?
if yes, this is a really huge drawback for us who want to change ROM more frequently than other android users, because we have to backup a 256 GB partition ...
This is not fast to do online ( at least with my poor connection ) and it is not fast to do on PC or on a USB KEY.
So we have 256 GB and we need to format at each ROM change ? Too bad ...
In the good old times i did extract my microSD card and i was safe .
Someone could explain me please ?
thank you all for your patience...

adario73 said:
Hello,
i have a silly question about step 4:
someone says we should "Wipe Data", someone says we should "Format Data" ,
i don't see a real difference unless we want to change the filesystem type.
Advices ?
And also, when we format ( or wipe ) the "Data" partition, are we formatting the 256 GB partition ?
if yes, this is a really huge drawback for us who want to change ROM more frequently than other android users, because we have to backup a 256 GB partition ...
This is not fast to do online ( at least with my poor connection ) and it is not fast to do on PC or on a USB KEY.
So we have 256 GB and we need to format at each ROM change ? Too bad ...
In the good old times i did extract my microSD card and i was safe .
Someone could explain me please ?
thank you all for your patience...
Click to expand...
Click to collapse
Hello,
You have to format data the first time you flash xiaomi.eu rom because their rom is base on Chinese firmware (if you don't or just wipe it will not boot)
Each time you will flash a rom with different base (from Chinese base to global base or global to Chinese) you will have to format data !!

You format data to remove encryption.

tott2003 said:
Quick questions, do netflix and google pay work after the flash?
Click to expand...
Click to collapse
Google pay isn't working as the safety net doesn't pass on stable realeses, someone made it to work on betas but I had no luck though

Stuck without solutions
Hello,
I tried to flash the latest miui 12. I followed all the steps...
But now I can't acess recovery nor rom.
Basically when i try to flash TWRP with bootloader it just goes back to fastboot.
Also note that the flash is successful. But I somehow can't acess TWRP, just goes back to fastboot
And when I flash the experimental TWRP on the dev thread it boots to recovery but asks for a password.. Impossible to flash anything.. Even after I formated data and everything
I tried flashing other TWRP I found but nothing boots even after trying a lot of time.
I tried <fastboot boot recovery.img> as well
I tried <fastboot erase recovery> and then flash the TWRP as well
I've been trying hard for the last 8 hours.
I also have a backup of when I had MIUI 12. But impossible to flash it with the only recovery I can boot to.
I feel so desperate. I'm out of ideas.
If you have any ideas, I'm listening
Thanks for the help guys.

Dallee said:
Hello,
I tried to flash the latest miui 12. I followed all the steps...
But now I can't acess recovery nor rom.
Basically when i try to flash TWRP with bootloader it just goes back to fastboot.
Also note that the flash is successful. But I somehow can't acess TWRP, just goes back to fastboot
And when I flash the experimental TWRP on the dev thread it boots to recovery but asks for a password.. Impossible to flash anything.. Even after I formated data and everything
I tried flashing other TWRP I found but nothing boots even after trying a lot of time.
I tried <fastboot boot recovery.img> as well
I tried <fastboot erase recovery> and then flash the TWRP as well
I've been trying hard for the last 8 hours.
I also have a backup of when I had MIUI 12. But impossible to flash it with the only recovery I can boot to.
I feel so desperate. I'm out of ideas.
If you have any ideas, I'm listening
Thanks for the help guys.
Click to expand...
Click to collapse
an what is the latest miui12 u try to flash

Related

GUIDE | Go Back to Stock ROM | Recovery | Fastboot

Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery
3. Latest adb & fastboot files
4. Stock ROM ZIP files
5. Stock Recovery [OPTIONAL]
Custom Recovery Method:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_*.zip /sdcard or MTP
3. Wipe data, cache & dalvik (format data if stuck at boot animation)
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip. Your device will have Stock Recovery with Stock ROM. Finally Reboot.
Fastboot Method:
Note: Following process formats internal storage, so backup the internal storage files. If your device is in Stock ROM & somehow system partition is messed up just flash only system.
1. Download required Fastboot files
2. If downloaded 7z files, extract system.img file.
3. Enter
Code:
fastboot -w && fastboot erase system && fastboot flash recovery recovery.img && fastboot flash boot boot.img && fastboot flash vbmeta vbmeta.img && fastboot flash dtbo dtbo.img && fastboot flash system system.img && fastboot reboot
4. It takes a while to flash System partition, have patience.
5. Device reboots to system if everything is flashed successfully.
Stock Recovery Method:
1. Download Stock ROM OZIP Files & Stock Recovery
2. Copy *.ozip to sdcard or internal storage.
2. Goto fastboot & enter fastboot flash recovery recovery.img
3. Reboot to recovery, wipe (1st option). Then go back to main menu Install from storage locate the *.ozip file & install.
I'm sorry, but this doesn't work for me..stuck with the rooted but uninstalled magisk OS.. :'(
ceesiama said:
I'm sorry, but this doesn't work for me..stuck with the rooted but uninstalled magisk OS.. :'(
Click to expand...
Click to collapse
zip isn't installed successfully? can you also send screenshot, so I can help you.
4j17h said:
zip isn't installed successfully? can you also send screenshot, so I can help you.
Click to expand...
Click to collapse
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(
ceesiama said:
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(
Click to expand...
Click to collapse
ok no problem, so what do you want to know about? Clear data, cache, dalvik after or before flashing stock zip it won't bootloop. Yes, since device is decrypted lock screen doesn't work. Coming to Magisk, yes that method is not reliable. I have figured out 100% working way which works for everyone & doesn't fail anytime. Maybe I will make a new guide soon or ...Mod edit: Link to Telegram removed
4j17h said:
ok no problem, so what do you want to know about? Clear data, cache, dalvik after or before flashing stock zip it won't bootloop. Coming to Magisk, yes that method is not reliable. I have figured out 100% working way which works for everyone & doesn't fail anytime. Maybe I will make a new guide soon or ...Mod edit: Link to Telegram removed
Click to expand...
Click to collapse
I'm sorry I mistyped in the above comment, when i followed your method, zip installed successfully but it bootlooped into stock recovery everytime. I hope that clarifies a bit. I''ll be very grateful if you can help me..
ceesiama said:
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(
Click to expand...
Click to collapse
Try install magisk manager, maybe ur device still rooted
haditriw said:
Try install magisk manager, maybe ur device still rooted
Click to expand...
Click to collapse
no that's not how magisk works in Realme 3 Pro, if device is restarted there will be no magisk. You need to goto fastboot then goto recovery, it boots to system. We have magisk. Yes this method tricky. I am going to publish new guide, it will be simple & straight forward.
Bricked/ Bootlooping
4j17h said:
Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery or Pitch Black Recovery
3. Latest adb & fastboot files
4. Stock ROM zip files: RMX1851_A15
5. Stock Recovery [OPTIONAL]
Follow the below steps:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_A15.zip /sdcard or MTP
3. Wipe data, cache & dalvik
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip, Reboot to System. You get the stock Recovery & stock ROM.
Previous Firmware: RMX1851_A14 Google Drive || AndroidFileHost || Mega Cloud storage
Note: This guide will be updated in coming days with fastboot flash files & custom recovery flashable files with latest versions.
Click to expand...
Click to collapse
pls help me, im stuck on bootlooop :'(
---------- Post added at 04:53 PM ---------- Previous post was at 04:52 PM ----------
4j17h said:
Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery or Pitch Black Recovery
3. Latest adb & fastboot files
4. Stock ROM zip files: RMX1851_A15
5. Stock Recovery [OPTIONAL]
Follow the below steps:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_A15.zip /sdcard or MTP
3. Wipe data, cache & dalvik
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip, Reboot to System. You get the stock Recovery & stock ROM.
Previous Firmware: RMX1851_A14 Google Drive || AndroidFileHost || Mega Cloud storage
Note: This guide will be updated in coming days with fastboot flash files & custom recovery flashable files with latest versions.
Click to expand...
Click to collapse
pls help me, im stuck on bootloop :'(
malakaz27 said:
pls help me, im stuck on bootlooop :'(
---------- Post added at 04:53 PM ---------- Previous post was at 04:52 PM ----------
pls help me, im stuck on bootloop :'(
Click to expand...
Click to collapse
I have seen you have started a new thread of bootloop. Is this because you flashed one of these stock zip? you were going back to stock from los?
this method worked perfectly fine for me. i tried both lineage os roms available and both of them caused bootloop or end up destroying boot. so thanks to developer for making this zip file.
4j17h said:
I have seen you have started a new thread of bootloop. Is this because you flashed one of these stock zip? you were going back to stock from los?
Click to expand...
Click to collapse
hi i am stuck in bootloop after flashing all stuff in fastboot guide
leo77g said:
hi i am stuck in bootloop after flashing all stuff in fastboot guide
Click to expand...
Click to collapse
bootloop to recovery? have you tried fastboot -w usually this should boot to system or else flash stock recovery, wipe full. This should definitely get back the device to system.
4j17h said:
bootloop to recovery? have you tried fastboot -w usually this should boot to system or else flash stock recovery, wipe full. This should definitely get back the device to system.
Click to expand...
Click to collapse
formatting worked and thanx for help )
Moderators' Announcement: I've removed the links to Telegram and references to it. This is not a development thread, and support is to be provided through XDA. Many posts proved this has not been the case!
You may be asking, "Why was my Telegram or Whatsapp thread closed?"
Well, it's just becoming too much.
Going forward, we will only allow one Telegram chat link on a development thread by the ROM's developer and only if thorough support is still provided in the ROM thread on XDA.
All discussion channels, photography channels, whatnot channels will be strongly discouraged and removed with immediate effect. Please reference the forum rules:
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
Click to expand...
Click to collapse
Also, we now have an official XDA Discord Server. We would encourage you to try it out.
Announcing the Official XDA-Developers Discord Server
FYI
Thanks,
The Moderation Team
Click to expand...
Click to collapse
Need Help
Hi, everybody. Really need help.
There is a phone Realme X Lite. Write that it is Realme 3 Pro for the Chinese market, as well as firmware.
My version was: RMX1851_11_A.05
Tried to flash RMX1851EX_11_OTA_0150_all_2Zfcensdoezk.ozip, recovery gave an error, *_0140_* wrote that the current version is newer.
In depth test APK on the version out of the box wrote that this version of the phone is not supported, so the bootloader could not unlock.
But in the official website came across an offer to join the testing of Android Q
r1.realme.net/general/20190522/1558492614147.pdf
There are two files, the second for rollback.
I installed P2Q, everything went well, but the SnapDragon camera is used and it is terrible if there is not enough light. In depth test is not even installed, apparently not supported in the new version.
I decided to roll back, chose in Recovery Q2P archive, there were no errors, but after rebooting the phone hangs on the initial screen saver and after 10 minutes throws in the recovery with the error "Data error, select wipe data to recovery system". Wipe doesn't help. The same with other archives for Realme 3 Pro.
Also found RMX1851_11_A.12_190423_abecd1fa.ofp for firmware via MsmDownloadTool, but it requires authorization and support refuses to call login details.
Can who faced a similar problem on this or other phone.
Please help, pay for the time spent =)
ResSetOk said:
Hi, everybody. Really need help.
There is a phone Realme X Lite. Write that it is Realme 3 Pro for the Chinese market, as well as firmware.
My version was: RMX1851_11_A.05
Tried to flash RMX1851EX_11_OTA_0150_all_2Zfcensdoezk.ozip, recovery gave an error, *_0140_* wrote that the current version is newer.
In depth test APK on the version out of the box wrote that this version of the phone is not supported, so the bootloader could not unlock.
But in the official website came across an offer to join the testing of Android Q
r1.realme.net/general/20190522/1558492614147.pdf
There are two files, the second for rollback.
I installed P2Q, everything went well, but the SnapDragon camera is used and it is terrible if there is not enough light. In depth test is not even installed, apparently not supported in the new version.
I decided to roll back, chose in Recovery Q2P archive, there were no errors, but after rebooting the phone hangs on the initial screen saver and after 10 minutes throws in the recovery with the error "Data error, select wipe data to recovery system". Wipe doesn't help. The same with other archives for Realme 3 Pro.
Also found RMX1851_11_A.12_190423_abecd1fa.ofp for firmware via MsmDownloadTool, but it requires authorization and support refuses to call login details.
Can who faced a similar problem on this or other phone.
Please help, pay for the time spent =)
Click to expand...
Click to collapse
since your bootloader is locked, all you can do is wipe full data or flash back P2Q then format & then flash Q2P.
4j17h said:
since your bootloader is locked, all you can do is wipe full data or flash back P2Q then format & then flash Q2P.
Click to expand...
Click to collapse
I did Wipe before and after firmware, on P2Q is stitched without problems, but under firmware in Q2P in recovery writes, that not managed wipe userdata. The data was not encrypted, the password is not asked.
do you have video for Fastboot Method ?
[No message]

Failed to flash ROM, Computer won't detect phone now, need help!

So I tried to flash miui eu and my phone was unable to reboot. It goes straight into recovery.
This step by step what I've done so far:
1) unlocked bootloader with xiaomi unlock
2) installed ADB and TWRP 3.3.1-0
3) attempted to flash miui eu ROM, which resulted in boot loop/enters recovery now
I can go back and forth between bootloader and recovery. I was just going to transfer another ROM to my phone and re-flash.
HOWEVER, I can't access the files on my phone via my computer
The phone is detected but it' listed as an "unspecified" device on my computer. Drivers are up to date per the xiaomi bootloader unlocker app.
Any help is appreciated...
Format data?
And after reboot to recovery and flash rom
You have twrp?
Try following this guide I wrote for someone else, the other day, just substitute the version of Xiaomi.EU you want to use for Evolution (or the Xiaomi.EU rom used in the middle of the guide, that may work).
Bootloops on this phone usually come down to needing to *FORMAT* (not just wipe) data, or needing to have the correct vendor image; the one you can find in this little guide has been working fine for me with everything.
https://forum.xda-developers.com/showpost.php?p=79909955&postcount=142
Had this issue before. Try format data typing "yes" then reboot to recovery.
Aleksanderbjorn said:
Had this issue before. Try format data typing "yes" then reboot to recovery.
Click to expand...
Click to collapse
this worked, thanks!

Possibly bricked my poco f2 pro, is there a way to fix this?

Hi all.
Today I unlocked my phone to flash the crDroid rom. First I went into fastboot to flash mauro's twrp and that worked fine. Then I flashed the miui 12.0.3 full stock image from twrp, which might have been a mistake since I flashed the full image instead of an extracted vendor / firmware version. Then I wiped system, cache and data and flashed twrp but when I tried to boot the phone it went into an infinite boot screen. Then I wiped and flashed the whole stock miui image again in the hope that I would at least be able to boot miui but that also failed, since the phone kept booting back to recovery and there was no boot screen at all.
I have also tried flashing the stock image (ver 12.0.6) from fastboot but it fails because of the anti rollback check error. The image I tried to flash has an antirollback version of 0 while my phone has a version of 1, so "current device antirollback version is greater than this package" is what I got. Now my options are very limited because for some reason my laptop can't access the file system of the phone so I can't transfer files to the phone anymore and the ADB sideload feature from twrp is not working, so I only have fastboot (adb also won't recognize my device). What can I do to save my phone? Any help is greatly appreciated.
Flash the MIUI with MiFlash.
Had sort of the same issue...
Try using adbfastboot tool ( it's a java programme ) to swap recoveries.
I got the bootloop after installing the LOS recovery , installed twrp from adbfastboot tool and got it working.
Nice to have working recovery but since adb sideload is broken in twrp i needed LOS recovery.
Tried to reflash the LOS recovery from the tool and this time it worked
Flash with Miflash (the latest version https://xiaomiflashtool.com/ option CLEAN ALL) the rom that was on your phone when you bought it.
For the roms It is better to flash firmwares with Miflash because TWRP is not 100% functional.
grt67DFqyu said:
Flash the MIUI with MiFlash.
Click to expand...
Click to collapse
Man I can't believe such a simple suggestion would work but it did thanks! Initially I did not flash with miflash because it prompted me to install drivers and it crashed when I clicked the install button, turns out all I had to do was create a folder named log in the miflash directory lol. So flashing the stock image works. And it definitely boots correctly to miui with the clean all and lock option.
But now when I try to flash crdroid or pixel experience I still end up with an infinite boot screen even when using exactly the specified firmware :/ Like you see crdroid and pixelexp boot animations correctly but it lasts forever. I must be doing something wrong with the firmware still because that's the only reason I can think of why it won't boot. After I flash the firmware in miflash I don't have to boot miui up first right? I'm using the 'save user data' option in miflash if that matters.
In my post, I specified CLEANALL, but anyway, you must format data before flashing.
Which rom do you want to install Cdroid or Pixel?
NOSS8 said:
In my post, I specified CLEANALL, but anyway, you must format data before flashing.
Which rom do you want to install Cdroid or Pixel?
Click to expand...
Click to collapse
I'm now trying to flash crdroid. After flashing V12.0.3.0.QJKMIXM in miflash with flash_all, I formatted data in twrp (the one where you have to type yes) but also with a decrypt & normal factory reset I still get the same result. After the format, I flashed crdroid without magisk and gapps, and it'll just hang on the crdroid boot screen :/. The weird thing is, before I flash the crdroid rom it can boot in MIUI just fine and it'll show that it's indeed the correct 12.0.3.0 in the settings so I have no idea if it's just the crdroid ROM at this point.
Flash with miflash V12.0.3.0.QJKMIXM reboot system and go fasboot when affiche "devices is locked",flash chinesse twrp ,reboot twrp,format data reboot twrp,wipe all ecxept OTG reboot twrp,flash Cdroid format data,reboot twrp flash gapps,reboot system( take time ).
NOSS8 said:
Flash with miflash V12.0.3.0.QJKMIXM reboot system and go fasboot when affiche "devices is locked",flash chinesse twrp ,reboot twrp,format data reboot twrp,wipe all ecxept OTG reboot twrp,flash Cdroid format data,reboot twrp flash gapps,reboot system( take time ).
Click to expand...
Click to collapse
This ended up working perfectly Crdroid is now running like a charm with gapps and magisk. Thank you guys a lot for helping me out with this!

Question Restore Poxo X3 Pro to default everything from linux

I installed lineageos 18.1 and TWRP on a Poco X3 Pro and would now like to restore everything back to default as much as possible. The guides I find with google all uses Xiaomi flash tool on windows. If necessary I could get a windows computer up and running to do this, but for me it would be easier to do in Linux. From this page I downloaded fastboot (tgz) version of V12.5.2.0.RJUEUXM. Unpacking this file there is a script flash_all.sh, which calls fastboot.
So the plan is: first wipe system, cache and userdata with TWRP. Then put phone in fastboot mode and run flash_all.sh. Then see that it boots up ok, and finally put the phone in fastboot mode again and run fastboot oem lock.
Could someone please confirm that I'm not doing something stupid here? (Yes of course the responsibility is all mine, etc).
I don't know if this help. But why not download MIUI recovery ROM, boot onto recovery, format, reboot recovery, put the ROM into storage via usb cable, then flash it, reboot system, and done. That's my personal experience from redmi note 8. Everything back to stock, except you still have TWRP installed.
And don't forget this will wipe EVERYTHING
octapod said:
I installed lineageos 18.1 and TWRP on a Poco X3 Pro and would now like to restore everything back to default as much as possible. The guides I find with google all uses Xiaomi flash tool on windows. If necessary I could get a windows computer up and running to do this, but for me it would be easier to do in Linux. From this page I downloaded fastboot (tgz) version of V12.5.2.0.RJUEUXM. Unpacking this file there is a script flash_all.sh, which calls fastboot.
So the plan is: first wipe system, cache and userdata with TWRP. Then put phone in fastboot mode and run flash_all.sh. Then see that it boots up ok, and finally put the phone in fastboot mode again and run fastboot oem lock.
Could someone please confirm that I'm not doing something stupid here? (Yes of course the responsibility is all mine, etc).
Click to expand...
Click to collapse
or you can just try this:
XiaoMiTool V2 - Modding of Xiaomi devices made easy for everyone
XiaoMiTool V2 is a easy to use tool to install rom on your Xiaomi device. Modding made easy for everyone! Download it for free now!
www.xiaomitool.com
Anyway, you can't wipe system in recovery, but no need anyway, just wipe data,cache and you may need to FORMAT data.
The rest is all good...
@muse_21
Don't know if recovery rom work in twrp (still unofficial) as for now, i know it will not work in orangefox, and stock rom has stock recovery in it, so if after flashing it you don't reboot to custom recovery the stock recovery will take over...
TioCareca said:
or you can just try this:
XiaoMiTool V2 - Modding of Xiaomi devices made easy for everyone
XiaoMiTool V2 is a easy to use tool to install rom on your Xiaomi device. Modding made easy for everyone! Download it for free now!
www.xiaomitool.com
Anyway, you can't wipe system in recovery, but no need anyway, just wipe data,cache and you may need to FORMAT data.
The rest is all good...
@muse_21
Don't know if recovery rom work in twrp (still unofficial) as for now, i know it will not work in orangefox, and stock rom has stock recovery in it, so if after flashing it you don't reboot to custom recovery the stock recovery will take over..
Click to expand...
Click to collapse
Thanks for the info. I'll keep that in mind in case i need it one day. I'm still using MIUI in my poco x3 pro

Stuck in Bootloop | TWRP installed

Hi, i just got my old 5 year old (now retired) device to bootup because someone had made a kernel for the device which supports overclocking so for the fun I wanted to try it
but there was one weird problem, it seemed that though the root permissions from years ago remained just like they were but magisk manager itself had lost root permissions though I was still able to grant root permissions to other applications normally
I was on an unofficial Lineage OS build and thought of returning to original Miui for the device, got the fastboot rom, got Mi flash, flashed it, booted up
but there was a catch, it would always throw an error on the login Miui account screen at startup saying "Couldn't check device security, please try again"
I had tried everything possible including:
adding a Xiaomi account
skipping sign in
Inserting a sim
None of them seemed to do anything so i flashed twrp recovery again as using mi flash to flash ur device's stock rom gets rid of custom recovery
Now here is the mistake I made
**I wiped the device clean using TWRP**
now i tried going into adb sideload mode, no matter what I did my PC wouldn't detect my device, tried going into fastboot mode and still my PC wouldn't recognise the device and same goes for Mi flash tool
additionally the device would automatically exit out of fastboot mode within 2 minutes and go on to the power off screen
I do have charge on the device it says it's at 87% on the TWRP menu
I can no longer bootup, im stuck at the MI logo on bootup
Device: Mi Max 2
Additional notes: I am not in a hurry as that is not my primary device so it is okay if you want to take your time to reply, even if there's no way i can get my phone to see the light of day again it's alright as the phone was retired and sitting collecting dust for 2 years now
I do not wish to visit a service center as it's not worth it for a device I'm just gonna use for a few hours then put it back into its grave again
just download that same, or another custom ROM, and flash it via TWRP (just put ROM in SD card).
Nothing is gone, i mean if you delete system via twrp of course it will bootloop as it don't have system.
And for reverting back to original stock ROM , i think it have to do something with encryption, or maybe just the fact you unlocked bootloader.
Best is to stay away from stock ROM, find some custom ROM which have similar to MIUI (stock rom) , somewhat improved, if you want to get as much stock ROM experience.
kraken-gz said:
just download that same, or another custom ROM, and flash it via TWRP (just put ROM in SD card).
Nothing is gone, i mean if you delete system via twrp of course it will bootloop as it don't have system.
And for reverting back to original stock ROM , i think it have to do something with encryption, or maybe just the fact you unlocked bootloader.
Best is to stay away from stock ROM, find some custom ROM which have similar to MIUI (stock rom) , somewhat improved, if you want to get as much stock ROM experience.
Click to expand...
Click to collapse
Hi, thanks for the reply, I tried using an SD card and unfortunately it wouldn't detect that too, what i found was I didn't wipe System it still shows that it's taking up some place (3597 MB)
i would be fine getting a custom rom on the device infact i have crdroid ready to be installed
could it be that the TWRP i installed (yes I downloaded the latest version and didn't flash the old one i had years ago) have some bugs? (I did install it from official TWRP website)
also note: though you see a Senior Member title below my name, im a complete and utter noob
BR4UTAL said:
Hi, thanks for the reply, I tried using an SD card and unfortunately it wouldn't detect that too, what i found was I didn't wipe System it still shows that it's taking up some place (3597 MB)
i would be fine getting a custom rom on the device infact i have crdroid ready to be installed
could it be that the TWRP i installed (yes I downloaded the latest version and didn't flash the old one i had years ago) have some bugs? (I did install it from official TWRP website)
also note: though you see a Senior Member title below my name, im a complete and utter noob
Click to expand...
Click to collapse
Lol I thought I was the only proper noob here on xda but nice to meet other noobs here too .
I think Kraken-gz is right, once the older devices are OEM off-support its best to stay away from OEM servers, I lost couple of old lesser-known-brand devices to OEM mischief i'd say coz it happened twice to me when I reloaded the original ROMs and tried to connected to the net they went dead on the next bootup, I think the OEMs have something going on there to boot out the older devices so newer ones could be pushed in the market sooner than they were supposed to. Possible.
so, first, in twrp, try to completely format it, follow this to do it
Just, a note: in advanced wipe delete system, data, dalvik cache and cache.
When trying to reboot into system, make sure twrp complains that it have no system. (that way, you know you deleted it)
reboot it, again in twrp.
try to flash custom ROM, should work as it have clean memory.
If it doesnt flash, then make sure to note all log file from twrp while flashing, and post it here, in order to see, what failed in flashing. If it succeds, it should load custom rom . If custom rom dont work, try another one, maybe older, or one that you had previous time (before trying to go into stock rom) (just, to try to boot it somehow. But before trying another custom rom, if one fails, do proper wiping described above.
If that fails try to download oldest stock ROM, and flash it. Maybe newest is blocking it.
If that fails, there is something called EDL mode, when fastboot is not available (for hard brick, like this).
here is video just to give you overview how to do it
and text also
Edit:
WAIT, try to format it, without wiping system. maybe it will boot again.
If not, other solutions are not applicable, if you dont find way to detect that sd card. Only EDL remains.
kraken-gz said:
so, first, in twrp, try to completely format it, follow this to do it
Just, a note: in advanced wipe delete system, data, dalvik cache and cache.
When trying to reboot into system, make sure twrp complains that it have no system. (that way, you know you deleted it)
reboot it, again in twrp.
try to flash custom ROM, should work as it have clean memory.
If it doesnt flash, then make sure to note all log file from twrp while flashing, and post it here, in order to see, what failed in flashing. If it succeds, it should load custom rom . If custom rom dont work, try another one, maybe older, or one that you had previous time (before trying to go into stock rom) (just, to try to boot it somehow. But before trying another custom rom, if one fails, do proper wiping described above.
If that fails try to download oldest stock ROM, and flash it. Maybe newest is blocking it.
If that fails, there is something called EDL mode, when fastboot is not available (for hard brick, like this).
here is video just to give you overview how to do it
and text also
Edit:
WAIT, try to format it, without wiping system. maybe it will boot again.
If not, other solutions are not applicable, if you dont find way to detect that sd card. Only EDL remains.
Click to expand...
Click to collapse
Tried wiping data, cache and dalvik cache and formatting data, none seemed to help
and still no sd card being detected
Now edl mode
I would love to boot into edl mode but the thing is my device isn't being recognised by adb nor is it being recognised by fastboot commands
so that's where I'm stuck for now
OldNoobOne said:
Lol I thought I was the only proper noob here on xda but nice to meet other noobs here too .
I think Kraken-gz is right, once the older devices are OEM off-support its best to stay away from OEM servers, I lost couple of old lesser-known-brand devices to OEM mischief i'd say coz it happened twice to me when I reloaded the original ROMs and tried to connected to the net they went dead on the next bootup, I think the OEMs have something going on there to boot out the older devices so newer ones could be pushed in the market sooner than they were supposed to. Possible.
Click to expand...
Click to collapse
Perhaps that is true

Categories

Resources