Database Info

Can't Access TWRP Recovery

Hi guys, I flashed the latest factory image, then flashed the latest TWRP but can access it 1 out of 10 tries.. What am I doing wrong? Is it a faulty replacement phone? Never had this issue with my other nexus 5 (same recovery file but lollipop and not marshmallow) and now I have this problem.. Tried to riflashato the factory image 5 times, boot to recovery without installing but nothing changed.. Thanks in advance!

If you just just flashed TWRP, then booted into Android, then reboot into recovery.. Android will overwrite TWRP with the stock recovery.
a hammerhead wrote this.

beekay201 said:
If you just just flashed TWRP, then booted into Android, then reboot into recovery.. Android will overwrite TWRP with the stock recovery.
a hammerhead wrote this.
Click to expand...
Click to collapse
Never happened before.. How can I prevent this? Sometimes I can't even boot to twrp after flashing and not rebooting to android..

carlese said:
Never happened before.. How can I prevent this? Sometimes I can't even boot to twrp after flashing and not rebooting to android..
Click to expand...
Click to collapse
do you finde fix

slavisa037 said:
do you finde fix
Click to expand...
Click to collapse
Downloaded twrp again and used flashify..

carlese said:
Downloaded twrp again and used flashify..
Click to expand...
Click to collapse
This is not really a fix, since to use Flashify one needs to be rooted already.
What I did to work around this was reflash LMY48M. After reflashing that, fastboot correctly boots/flashes twrp.
I've read that the issue arises when trying to boot and/or flash twrp with MRA56K installed, AND the device is connected to USB.

Ok, i got some of problems here, i tryied to root my Nexus 5 with other Android 6 version, it was the first one launched after development version. Now i have MRA58K version.
Problem 1 : I have no stock recovery, i first rooted original version of Marshmallow with CWM and i soft bricked, so no backup, no factory images. Installed MRA58K and there is no stock recovery, thanks god i can use bootloader. I can install TWRP, but i want to install the old recovery, Tell me how to do it.
Problem 2: Actual version of Marshmallow ask me to install a patch, but when installing i got stuck in TWRP, it cant install it (yes, android was rooted, but i installed twrp before root, and the update were before it.)
Thanks.

You can flash a stock ROM using the flash-all file in a command prompt. This will install stock ROM with stock recovery. Make sure the phone has an unlocked bootloader and you should be fine.
Official OTA updates cannot be installed with a custom recovery.

I tryied 3 times to install OS with flash-all. All the problems start after i installed CWM and try to root the phone, but after that, i used a stock rom image that was different build than actually one.
I`m not sure yet who`s fault is.
Any ideas?

I don't recommend using CWM, only TWRP.

After you flash TWRP always boot into it, and since you're flashing a custom recovery I'm going to assume you don't care about OTA's, swipe to allow system to be mounted. TWRP will automatically patch the system to survive android trying to overwrite it. Reboot into TWRP a second time to be safe. TWRP should stick from now on until you flash over it or restore stock system partition.

Yes, now i have TWRP as recovery, but i want to replace it with stock recovery.
Problem is, when i upload stock recovery and try to boot in recovery mode, i got the green dead android with red triangle.
But after TWRP uploading and booting in recovery mode, TWRP is there..
I really don`t know what`s wrong.

Flash stock recovery, select recovery from the fastboot menu, hold the power button and press volume up button.

Oneplus one(bacon) boot and recovery partition crashed. Can fastboot. phone brick

I have unlocked the boot loader on oneplus one long back. I tried to upgrade my rom to Resurrection Remix 7.1.1
I successfully upgraded the ROM and also flashed SuperSu in it. I wanted to flash the Opengaps Aroma 7.1 and that is where I ran into issue because of my stupidity.
I found from GitHub that there were some issues with twrp versions to run the aroma installer thus I tried multiple TWRP versions via (Google play - official TWRP recovery app) by downloading them and flashing it to recovery.
I have taken the full nandroid backup but unfortunately didn't keep it on external devices. So it was in the phone itself.
Now the issue -
When I tried flashing TWRP 3.0.2.0 from existing 2.8.4.1 I tried to run the Aroma but it didn't work. Then I tried to flash the recovery with TWRP 2.8.6.1 but Aroma failed again.
However, on the GitHub there was a info stating that known working TWRP recovery on Oneplus one is of TWRP 2.8.4.1
I tried to flash that into recovery and flash the Aroma, but it didn't boot into recovery with that image. Later I restarted the phone, and again flashed the latest recovery version 3.0.2.0
From here I ran into issue. When tried again to flash the Aroma, it didn't work. So I booted recovery again and in that I selected the recovery version 2.8.4.0 for both recovery and boot partition.
After that, phone is neither booting the system nor into recovery. I don't want to loose my data (which is in phone backup) and neither want to try Aroma again. (Even if all the 900mb data needs to be deleted.).
Can the XDA members confirm can I reinstall recovery working image (2.8.4.1) once again through the adb flash recovery <image>. And boot into recovery mode so that I can delete the boot partition once again and reinstall the ROM and data ?
I tried doing that once but one of the laptops which I had access didn't recognize the adb devices. May be the driver was not working for Win10 OS. However, on my personal laptop earlier I was able to run adb commands through CMD prompt. Currently, I don't have personal laptop and may get it by next week.
Can anybody please share me the links of working android driver so that I can install them on current laptop and then try adb commands from SDK to connect my phone.
Any suggestion from members would be of great help.
Note: Please don't suggest the methods to factory reset or lock bootloader to factory settings. As I don't want to loose all my contacts and data.
If there is a way to get just recovery working on the phone, it would be of great help. So that I can wipe other partitions and rebuild it again.
Thank You.

Oneplus one bricked twrp not loading and no rom installed

Hello everyone!
I am new here and really looking forward for some answers. I own oneplus one and had a good experience with it. I had upgraded to custom rom that is lineage os 14.1
I wanted to upgrade it to 15.1 through Twrp. I followed the same procedure as i did for last flashing. I wiped the old data and everything and started to flash new rom. But this time twrp was giving an error. When I did research on that i found that i needed to upgrade to newer version of twrp to install lineage os 15.1
I did the same. And then end of it I just unselected the Supersu root and it reboots. Now when I go to the twrp recovery. The oneplus icon shows but then nothing happens. My phone now doesn't have a rom and twrp recovery won't open. When I connect it to my laptop through fastboot, cmd doesn't recognizes the device. I don't have any knowledge about tech and stuff. And I might have done something wrong. Please help me with some solutions

First of all, try to reinstall TWRP trough fastboot (boot in bootloader mode with Volume UP + power), just google a guide if you don't know how fastboot works. also be sure to use the correct twrp for bacon
After that you should be able to boot back in recovery and flash your rom
if still it doesn't work, follow this guide
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851

Sometimes it happens we brick our phones but No worries as long as you can go to fastboot you can always restore back to how it was before.
Either use the Program the guy above provided or this guide:
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541

I want to know how to flash the twrp again through fastboot, because when I connect it, phone is not detected in cmd. It says no fastboot devices are there. But then I checked and it says some android thing is connected in device manager. I hope it is my Oneplus one. How to pass this step?

It's the android drivers. Make sure you have the drivers installed.

Thank you so much. I was able to download the twrp again and flashed the 14.1 lineage os. The latest twrp is not flashing in the phone i don't know why and because of that 15.1 lineage os is not flashing and shows error. But still it's a relief that my phone is working. Also, when i switch on the camera it's not working and the flashlight icon also is dim and doesn't gets clicked and not works.

Need help recovering my phone from bootloop after trying to update custom rom

Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Edit: I ended up fixing my own issue by ADB flashing on a different release of TWRP, and then installing fcrypt disabler after the rom but before everything else.

Sanarise said:
Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Click to expand...
Click to collapse
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc

Simoom Sadik said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
Unfortunately, I can't.
Trying to boot into TWRP just gets stuck on the 'Redmi' boot logo.
I just remembered that you can install TWRP over ADB, and that Peter's one says it works even when the system partition is empty, so maybe the issue is the TWRP I installed and could possibly undo this part of the issue over ADB.
It won't fix the issue preventing my from updating my rom, but recovery only is still better than a soft brick.
Edit: That worked, i've put Peter's TWRP back on, and it's launching into recovery mode/TWRP again now

twrp not boot after successfully flash in this rom
Sanarise said:
Unfortunately, I can't.
Trying to boot into TWRP just gets stuck on the 'Redmi' boot logo.
I just remembered that you can install TWRP over ADB, and that Peter's one says it works even when the system partition is empty, so maybe the issue is the TWRP I installed and could possibly undo this part of the issue over ADB.
It won't fix the issue preventing my from updating my rom, but recovery only is still better than a soft brick.
Edit: That worked, i've put Peter's TWRP back on, and it's launching into recovery mode/TWRP again now
Click to expand...
Click to collapse
flash latest twrp download from github, install twrpbuilder img twrp ,it boot fine and you will copy your data to pc and then install any other twrp img which u want , dont wipe anything from phone before phone boot.flash only original twrp builder 3.2.3.1 official,it boot only on latest updates.

Why nobody use orangefox?

is your issue solve or not tell,
Simoom Sadik said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
if your problem is not solve then tell me you need to flash a fastboot rom first with save user data.bat file and when it installed then you can install twrp builder 3.2.1. and then boot to twrp this methods working fine,if you recently flashed any android 10 rom then first you need to flash a miui fastboot rom,or flash it via command mode direct only 3 files
first click on extract a fastboot rom and copy boot system and vender file with flash.all bat file and make a new folder then click on flash.bat save user data file to flash these images
or you can do this manually
fastboot flash system system.img
fastboot flash vender vender.img
fastboot flash boot boot.img
then reboot device to fastboot again
now flash latest official twrp builder 3.2.3.1 img twrp and take all your data backup,
in fastboot flash latest miui do not downgrade direct otherwise you lost your data,
after this if you sucess then you can flash your old rom which is running before issue of boot loop of redmi logo
it will deincrypt your data safely and then root device and boot normally, if you lost anything then contact me with mail or whatsapp i will help you,7009197673 india
and this twrp work on all version from chines to global beta stable and indian stable

joke19 said:
Why nobody use orangefox?
Click to expand...
Click to collapse
In the end, I did try orangefox, and it might have been part of why it worked.
However, the crDroid installation instructions specifically mentions using Peter's TWRP, so I initially used that one.
anmoltinder said:
if your problem is not solve then tell me you need to flash a fastboot rom first with save user data.bat file and when it installed then you can install twrp builder 3.2.1. and then boot to twrp this methods working fine,if you recently flashed any android 10 rom then first you need to flash a miui fastboot rom,or flash it via command mode direct only 3 files
Click to expand...
Click to collapse
Thank you for the effort you put into typing up a guide to help me, but I ended up fixing my own problem.
I was able to use fastboot to flash on a better TWRP release, and then get the rom to install properly by installing fcrypt-disabler just after it.

Sanarise said:
Today I tried to finally update to the latest version of crDroid, but ended up having a bunch of issues doing so, and after a lot of troubleshooting and trying to fix it, I ended up putting it into a bootloop of some sort instead.
I'm pretty sure the last thing I tried was installing a different version of TWRP to see if that version would let me properly install the rom, and stop my phone from always rebooting into recovery mode.
Trying to turn it on normally or boot into TWRP leaves it hanging on the "Redmi" boot screen, it can boot into fastboot mode though.
I'm guessing that the only way to recover my phone at this point is to flash the Official MIUI rom back onto the phone, but that also involves wiping Data and losing pretty much everything I've put on the phone.
I was smart enough to make a TWRP of the Data folder, but while making the backup, the console said it doesn't include all personal files or something.
How much of my personal data and files can I rescue from the phone in this state, and how can I do that before it gets wiped when fixing it?
Also, I think I really need some help in actually restoring my phone and flashing the custom rom properly.
No matter how much effort I put into figuring out how to do this stuff, unexpected issues always seem to happen, and turns something that initially seemed so simple into multiple hours of troubleshooting.
The only way I think i've gotten rom flashing to work at all was by wiping everything and installing the official MIUI rom, but I don't want to be losing my data every month when an update comes out.
So, could someone please help me get my phone working again?
Edit: I ended up fixing my own issue by ADB flashing on a different release of TWRP, and then installing fcrypt disabler after the rom but before everything else.
Click to expand...
Click to collapse
help.I woke up yesterday and I turned on my phone and it is stuck on the Mi logo.All i can do is get it to fastboot thing.It seems like you and I have the same problem and I would love to have some help from you

Fcsubxrhi said:
help.I woke up yesterday and I turned on my phone and it is stuck on the Mi logo.All i can do is get it to fastboot thing.It seems like you and I have the same problem and I would love to have some help from you
Click to expand...
Click to collapse
If you can access fastboot, then flash TWRP.... Enter recovery, wipe your system partitions and then flash the Stock MIUI ROM or use the MiFlash tool. Make sure you aren't flashing an older version of the ROM than the onle already installed.

CongestedHangman said:
can u boot into twrp?
if u can boot, while in twrp, connect your phone via usb cable to pc. u can copy everything on pc
Click to expand...
Click to collapse
I have the same problem that stated after installing the update for derpfest and I can boot into twrp. Any solution for me?

TWRP can't decrypt + Fastboot loop

Unsure if this is the place since its also related to TWRP 3.7, any help is appreicated
Got stuck in a weird situation and wondering if anyone has ideas.
Current State:
Slot_A on OOS 11, can boot TWRP via Fastboot
Slot_B on OOS 12, can only boot into Fastboot
Originally on OOS 11, booted TWRP and made backups of all partitions (data, boot, system image, vendor image, etc.). Forgot to move this to computer so this is all still stored on device.
Proceeded with OOS 12 upgrade (into Slot B). Patched magisk, rebooted, then flashed TWRP 3.7 (FBEv1), direct installed magisk, rebooted. - Everything was functional, but decided to go back to OOS 11.
Thinking I could just use the TWRP backup made on OOS 11, I did the following:
Booted into 3.7 TWRP
Restored the backup for boot, system image, and vendor image
Set active slot to Slot A and reboot
It doesn't allow me to boot into the OS (Presumably because the data was re-encrypted for OOS 12?)
Set active-slot=b and reboot, but it's locked to fastboot.
I've attempted a few things, but I can't boot back into OOS. I would prefer to retrieve my TWRP backups first before doing an MSM reset.
When on Slot_A (older), I can only boot into TWRP 3.6.2 and 3.7. I'm guessing 3.6.2 can't decrypt since it's only configured for A11 and under, but not sure why 3.7 can't decrypt my data.
- It doesn't even ask for pin when TWRP launches; maybe it's reading the System for Slot_A and thinks i'm still on A11?
- running `twrp decrypt {pin}` doesn't seem to work. Unsure if there's something done to my lockscreen pin to be used as the encryption key/password?
When on Slot_A, attempting to boot into either the system or TWRP hangs.
Things I've tried:
Flashing A11 boot.img and magisk-patched boot.img to Slot_A -> Hangs on 1+ Spinning dots
Flashing A12 boot.img and magisk-patched boot.img to Slot_B -> Hangs on 1+ logo (Does show up on ADB though)
Booting Slot_B into TWRP 3.6.2 (Official, and Nebrassy unofficial for A12) and TWRP 3.7 -> Gets stuck on "Fastboot Mode" screen (fastboot cli still responds) or Hangs on snapdragon logo
Edit: Ended up using MSM. Needed device for work

I have a similiar problem to flash twrp to my phone ,
each time i try i get a fastboot loop too and i have to reset/unbrick it with the msm tool back to android 11
i use the OnePlus_7_Pro_Global_OxygenOS_11.0.5.1 package to unbrick the phone , i dont know how long and often i tried now to get twrp to work so that i can flash a custom fw ... i want root and a android 13 based cfw but i dont get it to work :/

I got it working with crdroid. heres some stuff
guacamole - Google Drive
drive.google.com
be carefull
¯\_(ツ)_/¯​
------------------------------------
I got stable and decrypted fs RW working on crdroid 9.1 firmware other than some weird bugs
i put it in the 2023-twrp

MissAnthropin said:
I have a similiar problem to flash twrp to my phone ,
each time i try i get a fastboot loop too and i have to reset/unbrick it with the msm tool back to android 11
i use the OnePlus_7_Pro_Global_OxygenOS_11.0.5.1 package to unbrick the phone , i dont know how long and often i tried now to get twrp to work so that i can flash a custom fw ... i want root and a android 13 based cfw but i dont get it to work :/
Click to expand...
Click to collapse
I have the exact same problem! Have you found a fix yet? This seems to happen when I try to install Android 13 based roms, and when I install a rom like Lineage OS, using their recovery, it works just fine.

No, and I don't know why, maybe i do something wrong or it is the Modell that make this trouble.
I thinking to sell my OP7PRO and buy another one ( and then I have the same problem with the new phone )
No no let the jokes aside, it must work, i mailed with OnePlus Support Germany but they only helped me to install A11 w/root and recovery, i thought ok now I can update to A13 so I loaded A13, unpacked the boot.img, Patched the boot.img
Installed A13 w/out errors, rebooted - Fastboot loop

RIP
Started ranting instead

TWRP for guacamole development seems to be fairly scarce, last working recovery I tried was when they started using fastboot boot to enter it. It was pretty hacky even then, currently it seems that nebrassy is the maintainer for twrp for guacamole.
Github: https://github.com/nebrassy Android 12 thread: https://forum.xda-developers.com/t/recovery-12-official-teamwin-recovery-project.4269551/ Nebrassys Telegram has helpful info as well: https://t.me/NSSFB
last update I found was 2022:10:2 - https://www.pling.com/s/Phones/p/1835156
after a few days of torture I read a thread on here saying if you flashed twrp via magisk like you would if it was a magisk moule it would work normally. It worked on my device so I assume that its universal. I have filled my computer with guacamole related files Im uploading here before im forced to reinstall my os:
guacamole - Google Drive
drive.google.com
Just a fyi from what I have gathered from my experience you can get a stable twrp recovery with persistant / read write access and disabled encryption and basically use it with little error up until you try flashing a newer custom rom. My guess is when flashing a cfw the bootloader gets rewritten causing our boot image to become corrupted. Flashing twrp over / booting to twrp via fastboot or trying to install it via another custom recovery causes boot / recovery failures... meaning you cant really use it for flashing custom roms. I cant find the post with the install instructions I seen that helped me so here is what I think it was,
Found it: https://forum.xda-developers.com/t/how-to-make-twrp-work-in-your-stock-a12.4522667/#post-87985325
~ I have bricked this device constantly while ****ing around so unless youre prepared to go to war with the ****er, Id quit messing with it.
MSM flashing with windows is the only way to recover from the void.
Click to expand...
Click to collapse
using Linux systems for EDL is a bit more difficult to figure out but can be done > EDL https://github.com/bkerler/edl/blob/master/edl | https://github.com/andersson/qdl
Click to expand...
Click to collapse
~If you do brick I created a fastboot flashable A13 Oxygen os recovery rom and uploaded it to my google drive found under recovery_brick_fastboot.zip ~
Click to expand...
Click to collapse
lastly be mindful of a/b partition configuration or youll find yourself lost or bricked
Installation:
1. Obviously unlock the bootloader - OEM Unlock
2. Flash custom recovery (lineage/crdroid/etc)
3. (Personally I root here and again on the active slot so) flash magisk.zip
4. Reboot into installed ROM and install magisk android app and complete setup, reboot system
5. (another thing I like to do before flashing twrp) setup magisk enable all the basic options like prophide, deny list then set root userspace option to global.
6. Flash TWRP .zip (https://dl.twrp.me/guacamolev2/twrp-installer-3.7.0_12-0-guacamolev2.zip) via magisk
Alright! After all that you should be able to reboot into recovery via adb reboot recovery / fastboot or power menu and you find a working twrp recovery installed.
If you need help or want to **** around with the device you can @ me anytime and ill do my best to halp
2600 IRC (cornelius.scuttled.net >Nick captain >channel #guac)
Telegram https://t.me/+pxvpKToFo6pkMGYx
Discord https://discord.gg/MhvWgEfY

Pics

RolandStoner said:
Pics
Click to expand...
Click to collapse
You Confussing me a lot with your Posts before ...
i´m unsure what you mean exactly,
my bootloader is unlocked, with magisk i got a working root but after that i fail
what you mean with flash twrp with magisk ?
after unlocking the bootloader and get root, i tryd to flash twrp like before on other devices but that seems not working because i get then the fastboot loop
on another thread i found here on xda too, the guy wrote dont forget to activate the fastboot loop fix in the advanced options
but i not tried it yet again , so what should i do now ?
for now , i´m back on android11 , with stock oxygen os firmware
i have to do now the things like i did before again , unpack boot.img from the firmware that is installed on the device
patch it with magisk, flash it with "fastboot flash boot boot-patched.img" or is this step senseless ?
i mean you only wrote unlock bootloader and flash a cfw , but i don´t have a chance to flash a custom fw without a custom recovery ??
my recovery on my op7pro have no options for "install zip" or something else
addendum:
like i said you confused me a lot
addendum two:
or i do what i said before .. i sell my op7pro and buy me a one where i havent so much trouble installing twrp and root
i never had a phone before that made so much trouble in installing simple twrp ...
but i don´t found a phone yet that is compatible with kali and the pentest tools or wardriving tools like the oneplus , so i have a problem ,... i think i should drink now my selfmade blackberry liquor ( or blackberry booze ? ) and let the smartphone be a smartphone for now and power off my brain for a while

Yes, you need to patch your boot image via magisk and flash it with fastboot.
After you let magisk do its first time setup and then once it reboots you go to Magisk > Modules and flash the twrp recovery .zip file you got from twrp. link:https://twrp.me/oneplus/oneplus7pro.html just like you would if it was a magisk module.

the password for twrp decryption is your pin. Here are simpler instructions
https://forum.xda-developers.com/t/how-to-make-twrp-work-in-your-stock-a12.4522667/#post-87985325

****... I forgot a step.
after flashing twrp as a module in magisk you dont reboot, you go back to the main screen hit the install button and choose direct install

Now I understand it more, i had before rooted the phone successful with magisk, but then I made a wrong decision and booted into Fastboot and flashed TWRP in Fastboot Mode as I did it before with all my Smarties i had before, coz those way with Fastboot worked before all the time so I never thought that this is the error in the procedure
I give the twrp flashing with magisk a try.
Thx for the help

MissAnthropin said:
Now I understand it more, i had before rooted the phone successful with magisk, but then I made a wrong decision and booted into Fastboot and flashed TWRP in Fastboot Mode as I did it before with all my Smarties i had before, coz those way with Fastboot worked before all the time so I never thought that this is the error in the procedure
I give the twrp flashing with magisk a try.
Thx for the help
Click to expand...
Click to collapse
Thank @yassine2217 because I would never have done so either.... Still many bugs but twrp is twrp