Orbit2 - the on/off button at the top is non responsive . It means when my backlight turns off I have to reset the device to use it again. I have disabled the backlight timeout for now,but it is an extra drain on the battery and im worried if the device turns off I will not be able to turn it on again. Any solutions ?
Is this an problem anymore?
Got the same now, an opened the device.
The button is mountet at 4 points, at mine 2 are brocken => no contact, no function...
After being quoted 100quid to fix it, I changed the settings so any button will take the device out of sleep mode. It is not fixed but this way works ok .
fallenmonk said:
After being quoted 100quid to fix it, I changed the settings so any button will take the device out of sleep mode. It is not fixed but this way works ok .
Click to expand...
Click to collapse
I have the same problem but can't find the setting that will allow me to un-sleep my phone with any button.
I use rom: 3LIT3_VIII_Full NLD
I think that these setting has been disabled in the rom.
Is there a register setting?
thanks
I do not know anything about roms.
You can turn off sleep mode in the battery saver I think. But means your battery gets used more quickly . The other way I tried was in the settings where any button will turn off sleep mode. This way was better.
Same problem! Although me being the idiot that I am have just dropped the battery and have no way of turning it back on. Any ideas?? Anyone?
Just plug your charger in press the camera and reset then you should get the spl screen then press the reset to boot into windows.This will only work if you are getting power ie from your charger or usb.
fallenmonk said:
I do not know anything about roms.
You can turn off sleep mode in the battery saver I think. But means your battery gets used more quickly . The other way I tried was in the settings where any button will turn off sleep mode. This way was better.
Click to expand...
Click to collapse
Good man! What would I do without you guys
I have the same problem and I do this...but my phone is not powering on.. what can I do now. Is there any other solution.. my phone is not responding....
My phone is not responding with any key...
meknb said:
Just plug your charger in press the camera and reset then you should get the spl screen then press the reset to boot into windows.This will only work if you are getting power ie from your charger or usb.
Click to expand...
Click to collapse
I have the same problem and I do this...but my phone is not powering on.. what can I do now. Is there any other solution.. my phone is not responding....
Is your phone led lighting up when plugged in ? If not could be usb not working,if it is could be your camera button knackered to so can't get to the spl screen.
Then plug your phone in then do a hard reset except dont press the send button then you should boot into windows without loosing any data.
So my friend's nexus 5 is turning on but the screen is just staying black, like just the backlight is on. The phone seems to fine, he's getting notifications and everything, however the touchscreen doesn't work either.
The phone is pattern locked and ADB wasn't enabled, is there anything I can do?
Has this happened to anyone else?
Could we back it up and flash it although it's pattern locked and USB debugging wasn't enabled before?
The phone is flashed, but I'm not sure if he has root anymore, it might have been broken by an update.
Any help would be greatly appreciated.
long press the power button, about 20-30 seconds. this will power it off/reboot it.
My opo device is not responding at all. I was using the device normally and suddenly the screen turned black and since than its not responding at all. My device was not rooted and i was using the CM 13.1 stock. The device had around 50% battery when it turned off. I have tried power cycling it and pressing the power and volume down button but still nothing. It won't even turn on and there is no vibration or anything when i am holding the power button. Can anyone please help me!!
Bump. Mine too. Nothing, totally dead. How do I do a factory reset if I can't even turn it on?
your device has this been recognized qsbusb_bulk
Possible fix
https://forums.oneplus.net/threads/solution-recover-from-hard-bricked-oneplus-one.104943/
Mine too, but after i kept the power button pressed for 3-4 minutes it rebooted...i was running cm13.1
If anyone is having a problem with back button self pressing and your unable to get into anything on your phone simple fix just connect to a pc computer via USB for five minutes turn phone off while connected and turn back on this will sort phone out no need to reset phone to factory settings or anything harsh.hope this helps you guys
hello
so the power button of my lenovo A1000 completely broke, as in there's no way I could just remove it and just use a sharp object
it's currently turned off completely and I can't turn it back on, I tried charging in it hoping it would turn on , the charging screen shows up but nothing else much
I also tried adb program but it turns out I dont have the usb debugging option checked and obviously I can't turn it on
any help is appreciated
Replace the switch.