If anyone is having a problem with back button self pressing and your unable to get into anything on your phone simple fix just connect to a pc computer via USB for five minutes turn phone off while connected and turn back on this will sort phone out no need to reset phone to factory settings or anything harsh.hope this helps you guys
Related
I have a Lg G Pro 2. Few days back it got bricked by its own( a crazy fact). That time it was showing QHSUSB_BULK. I figured it out as 9006. Took the phone to a local service shop. Today I got it back and found that nothing had happened to the phone, except worse. Now it is not detected by PC, only green light blinks for some time if tried to power on. And then everything is black and cold as death.
I think it have been flashed with wrong ROM. Anybody here can guide me with the test points of Lg G Pro 2 (D838 F350) ? So that I can force it to QHSUSB_BULK ? Or any step by step advice to get it up ?
I am in real need of assistance, and thanks in advance for any sort of help. Best Regards.
I would like to mention that the phone indicator blinks for sometime if I try to power it on, as it does on boot, but nothing else is there. No recognition by PC, no presence in Device Manager. Blinks for sometime, stops, again starts blinking... and this goes on at regular short intervals. The area around the camera gets warm after sometime. Everything loops till I pull off battery.
Now, am I missing something ? Is the problem not as deadly as I am thinking ? Is it soft bricked ?
Hi, I not sure how it got bricked I never brick LG device.
Normally if anything happen we try pull battery out and put it back in, try then to turn the phone on.
Have you try connect to to pc with USB cable, one end of USB connnect to pc and other end connect to the phone. Then try press Power + Volume Up or Power + Volume down, this is to try to get into phone download mode. If you can get into download mode you can flash the kdz file to make it useable again.
Or without the USB cable we want to get to factory reset mode by use hardware method try press:
- Power + Volume Up or Power + Volume down
- If you see LG logo come up release the buttons you press above 1-2 second
- Press again Power + Volume Up or Power + Volume down
- Until it show and ask to use volume up/down button to select choice, say yes
Caution factory reset will delete all data on the phone and reset it as when you bought it new.
- Again it will ask for factory reset, use Volume up/down to choose and select yes for factory reset
turn on the phone and when light is blink press volume up or down button for some time and see if it it is detected as usbhulq?
I'd accidentally deleted many of my screenshots from my phone, a Samsung Galaxy J7 Prime (16GB). But then, I wanted to recover my photos, so I used Dr. fone by Wondershare to recover my photos. I was told to turn on Developer Options and then turn on USB debugging. I did that and plugged my phone to my PC. The Dr. fone said that it would root my phone temporarily to access the deleted photos and then unroot the phone once completed, but I accidentally disconnected the connection between the phone and PC because the cable's connector pin was loose.
Since then, my phone wouldn't react at all when I press or hold any button, I tried holding the power button for more than 10 seconds, then 30 seconds, then the home button, then the power+volume down, and every possible button combination for over 30 seconds. But nothing happens. But the entire time since I disconnected the cable, my phone's LED indicator was a solid red color. What does that mean? Now, I didn't charge the phone later, and the red LED disappeared. So, what do I do now? I got this for my birthday present and it's gone in two months. (and I'm only 15, I can't go and buy another phone).
I still have 10 months of warranty remaining. Will Samsung give me a replacement or something? And my PC doesn't show the phone when connected to my PC too.
Please help! :crying:
Try to connect in the download mode, and install the Stock ROM, if you need help, send a private message to me
long story short i had my S8+ on the shelf for a while and dropped it so i got a replacement thru insurance. new one came in, try to set it up, can detect the wifi but everytime i try connecting it will say wrong password even though it's right, then i try to connect to ones that doesn't have password it'll just show connecting and then nothing or sometimes it'll say unable to obtain IP. i tried resetting. reformatting and everything doesn't work. so is it defective? also when you go to recovery mode. volume up bixby button power button is it suppose to load to the no command screen by default? or does it load to the recovery screen? i have to do the volume up bixby button power button thing again once i'm in that screen to get the recovery menu.
Hello guys,
My Samsung Galaxy S6 Edge (SM-G925F) has been sitting in the corner for a while. I've flashing it so Custom ROM (don't remember to which) and it got bricked. I've tried all possible ways to turn it on (Volume DOWN + Home + Power), but nothing helps. I can't turn on the Recovery Mode and Download Mode. I connected it to my PC, it recognizes it but instantly disconnects from it. When I hold POWER button, computer it recognizes it, when releasing the POWER button, it disconnects. When I open Device Manager on computer, it recognizes it as a Exynos7240. I tried to install various drivers but no-one seems to be working. The phone can't be detected by Odin, Multidownloader, Smart Switch and other apps.
If anyone knows the solution how to fix it, that might be really helpful.
Computer is using Windows 10 (64-bit).
Hi everyone,
My phone got updated to UI 3.1, after the restart it has gone into boot loop. I am not able to enter the recovery also. Not able to turn it off, it continuously restarts after the Samsung Galaxy M31w powered by Knox screen.
I have connected the USB to the PC and tried all the combinations to enter the recovery mode.
Kindly help please.
Use the buttons to try to force a hard reset.
Otherwise, let it run down until it auto shuts down unless you can easily pull the battery.
Charge to at least 50% before trying to boot up.
Hopefully it will at least allow access to the boot menu afterwards.
That really sucks... if you're near a Samsung Experience center drag it into them.
I'm having far less issues than you with Samsung updates but the recent Wearables update trashed my bt partially. It's still fighting me even after a roll back. grrrr... it was working fine until that forced update
you might need to use a cable to enter recovery or download modes now like other Samsung phones.
the instant the screen goes black try holding volume up and power and plugging in the USB cable that's connected to something on the other end.
Did you solved the problem???