ODIN MODE:
PRODUCT NAME: SM - G920T
CURRENT BINARY: Custom
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x020c)
RP SMREV: B:5 K:3 S:4
saw custom lock on my phone, tried to use odin to flash it but I'm having this on my download screen.
Also i don't have the box to determine the Serial number.
Please help me out.
Samsung S7 Bootloop, no Recovery Mode, can't load BL in Odin.
Hi,
a friend gave me his S7 to 'fix' it, but I don't know what to do about it.
It can't boot in Recovery Mode, only Download mode.
I tried to flash stock rom, but if I load anything in the BL section in Odin, and push start, it fails.
On my phone there is this:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enabled
WARRANTY VOID: 0 (0X0000)
RP SWREV: B:2 K:0 S:0
Secure JTAG Disabled!!
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
Help please.
Teejeevee said:
Samsung S7 Bootloop, no Recovery Mode, can't load BL in Odin.
Hi,
a friend gave me his S7 to 'fix' it, but I don't know what to do about it.
It can't boot in Recovery Mode, only Download mode.
I tried to flash stock rom, but if I load anything in the BL section in Odin, and push start, it fails.
On my phone there is this:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enabled
WARRANTY VOID: 0 (0X0000)
RP SWREV: B:2 K:0 S:0
Secure JTAG Disabled!!
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
Help please.
Click to expand...
Click to collapse
Ive been trying to deal with this issue as well, you are lucky, I have the sm g930P and sprint just updated the Fused to B7 and I didnt know that. Mine is stuck in a recovery Loop and I dont have a recovery installed, it is the qualcomm model so i havent had any lucky flashing induvidual files. My bootloader is locked and every time I try to flash the BL file it Gives me A secure Rev Check Fail.
For You though all you need to do is find the Right Firmware for your Friends Phone. You may also be using the wrong version of Odin. Thanks in advance to anyone who can help.
RED
Teejeevee said:
Samsung S7 Bootloop, no Recovery Mode, can't load BL in Odin.
Hi,
a friend gave me his S7 to 'fix' it, but I don't know what to do about it.
It can't boot in Recovery Mode, only Download mode.
I tried to flash stock rom, but if I load anything in the BL section in Odin, and push start, it fails.
On my phone there is this:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enabled
WARRANTY VOID: 0 (0X0000)
RP SWREV: B:2 K:0 S:0
Secure JTAG Disabled!!
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
Help please.
Click to expand...
Click to collapse
Device means it's security level, so when its 2 you can't install a binary 1 package. Download the firmware with (AP_G930FXXU 3 = binary 3. Odin does not accept the device to flash a older firmware for security reasons. So I will leave a link for a firmware with binary 3 so it wont be any problems. Hope it helps (Sorry for bad English but im just a 14 years old kid from Sweden.) Btw just tell me if you need a specific CSC and I can change the link
Download
I tried to flash TWRP. But that doesn't work with the following error message!
Odin Mode (High Speed)
Product Name: SM-G935U
Current Binary: Samsung Official
Systemstatus: Official
FAP Lock: Off
Warranty Void: 0x0
Wualcom Secureboot: Enable
AP SWREV:B11(2.1.1.1.1) K11 S11
Secure Download: Enable
Secury check fail: recovery
There is no official twrp for the model with a snapdragon processor.
Device: Samsung J4+ (SM-J415-FN)
Tried rooting my phone through the instructions posted here:
[RECOVERY][ROOT]TWRP 3.3.1-1 Galaxy J4+/J415F/FN/G/DS
Unofficial release -TWRP recovery for the Galaxy J4 plus 2018 - SM-J415 MSM8917 TWRP 3.3.1-0 Released May 22, 2019 TWRP 3.3.1-0 is out now for most currently supported devices. What's new in 3.3.1-0: * Fix selinux issues during formatting -...
forum.xda-developers.com
I exited after finishing TWRP flash, because the file for V3 RMM bypass wouldn't flash, no matter what I did to it
Now, its stuck in a boot loop.
TWRP says that internal memory is at 0GB, and ODIN is giving me a hard time by rejecting my flash when I try to revert to stock
ODIN MODE (HIGH SPEED) PRODUCT NAME: SM-J145FN
CURRENT BINARY: Custom
FAP LOCK: OFF
OEM LOCK: OFF
KG STATUS: CHECKING
WARRANTY VOID: 0x1 (0x500)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A6, P1
RP SWREB: K, 6, S 6
DID: 0056F661d4e2
SECURE DOWNLOAD: ENABLE
download mode!!!
SW REV CHECK FAIL : (aboot)Fused6 > Binary 3
I'm a noob when it comes to these things, somebody help me!
Fixed by @hainguyenthao!!
Thanks man!!!!
I’ve done too much times of factory resets (recovery mode) and Downloads of the full Android 11 based firmware (see SamMobile) onto the device (by Heimdall), but still unfortunately my device is still under boot loops, w/o KNOX disabled or even removed, or vm-verity disabled before. But now i no longer have access to the ROM at all, hence unable to authorize ADB for disabling dm-verity or removing KNOX.
And finally nothing more could also be done using recovery or Download mode, what to do next?
Code:
Heimdall mode (High speed)
Product name: SM-A125F
Current binary: Samsung official
FRP lock: Off
OEM lock: Off (U)
KG status: checking
MTK ’’secure’’ boot: Enable (0)
Warranty void: 0x1 (0x500)
RP SWREV: B1 NS1 K1 S1
‘‘Secure’’ Download: Enable
CASS: 0x1
DID: 000ac3086b58
CARRIER_ID: TGY
Code:
Android recovery
samsung/a12nsxx/a12
11/RP1A.200720.012/A125FXXU1BUE3
user/release-keys
Code:
#Reboot Recovery Cause is [UNKNOWN]#
#Reason is []#
Support API: 3
# MANUAL MODE v1.0.0#
No command specified.