Device: Samsung J4+ (SM-J415-FN)
Tried rooting my phone through the instructions posted here:
[RECOVERY][ROOT]TWRP 3.3.1-1 Galaxy J4+/J415F/FN/G/DS
Unofficial release -TWRP recovery for the Galaxy J4 plus 2018 - SM-J415 MSM8917 TWRP 3.3.1-0 Released May 22, 2019 TWRP 3.3.1-0 is out now for most currently supported devices. What's new in 3.3.1-0: * Fix selinux issues during formatting -...
forum.xda-developers.com
I exited after finishing TWRP flash, because the file for V3 RMM bypass wouldn't flash, no matter what I did to it
Now, its stuck in a boot loop.
TWRP says that internal memory is at 0GB, and ODIN is giving me a hard time by rejecting my flash when I try to revert to stock
ODIN MODE (HIGH SPEED) PRODUCT NAME: SM-J145FN
CURRENT BINARY: Custom
FAP LOCK: OFF
OEM LOCK: OFF
KG STATUS: CHECKING
WARRANTY VOID: 0x1 (0x500)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A6, P1
RP SWREB: K, 6, S 6
DID: 0056F661d4e2
SECURE DOWNLOAD: ENABLE
download mode!!!
SW REV CHECK FAIL : (aboot)Fused6 > Binary 3
I'm a noob when it comes to these things, somebody help me!
Fixed by @hainguyenthao!!
Thanks man!!!!
Related
Good Morning,
I am not able to put the LineageOS 16 rom on Samsung Galaxy tab A T550.
I have tried both ways:
with TRWP and with rom.zip and it won't let me.
I have also tried ODIN and the 4 files + pit, and it does not let me either, it gives me an error in both.
I have not been able to unlock the bootloader, because the fastboot commands do not work (I have read that fastboot does not work on samsung), and I have no OEM menu unlock option.
I think I can't install the lineageOS rom because this qualcom secure boot: enable
and I don't know how to unlock it to install.
I have tried everything.
somebody could help me.
I DO NO PUT PHOTO..., BUT DEVICE IS
ODIN MODE
PRODUCT NAME: SM-T550
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
WARRANTY VOID: 0x1 (2)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREP: S1, T1, H1, R1, A1, P1
SECURE DOWNLOAD:ENABLE
Thank you
I tried to flash TWRP. But that doesn't work with the following error message!
Odin Mode (High Speed)
Product Name: SM-G935U
Current Binary: Samsung Official
Systemstatus: Official
FAP Lock: Off
Warranty Void: 0x0
Wualcom Secureboot: Enable
AP SWREV:B11(2.1.1.1.1) K11 S11
Secure Download: Enable
Secury check fail: recovery
There is no official twrp for the model with a snapdragon processor.
My Samsung sm-G930V is stuck on recovery booting, i don't know the firmware for it i only know the download mode info..
Product Name: SM-G930V
Current Binary: Samsung Official
System Status: Official
Frp lock: On
Qualcomm SecureBoot: Enable
RP SWREV: B11(2,1,1,1,1) K11 S11
Secure Download: Enable
This is all i know for now...
Please i need help...
I’ve done too much times of factory resets (recovery mode) and Downloads of the full Android 11 based firmware (see SamMobile) onto the device (by Heimdall), but still unfortunately my device is still under boot loops, w/o KNOX disabled or even removed, or vm-verity disabled before. But now i no longer have access to the ROM at all, hence unable to authorize ADB for disabling dm-verity or removing KNOX.
And finally nothing more could also be done using recovery or Download mode, what to do next?
Code:
Heimdall mode (High speed)
Product name: SM-A125F
Current binary: Samsung official
FRP lock: Off
OEM lock: Off (U)
KG status: checking
MTK ’’secure’’ boot: Enable (0)
Warranty void: 0x1 (0x500)
RP SWREV: B1 NS1 K1 S1
‘‘Secure’’ Download: Enable
CASS: 0x1
DID: 000ac3086b58
CARRIER_ID: TGY
Code:
Android recovery
samsung/a12nsxx/a12
11/RP1A.200720.012/A125FXXU1BUE3
user/release-keys
Code:
#Reboot Recovery Cause is [UNKNOWN]#
#Reason is []#
Support API: 3
# MANUAL MODE v1.0.0#
No command specified.
My device is Samsung A125F, and when flashing an empty vbmeta by @edward0181 with both Heimdall and Odin (preparing to flash TWRP also by this guy), the Downloader doesn’t allow flashing unofficial bins on boot due to Knox-KG status of prenormal, and flashing stock packages doesn’t reset Knox-KG to normal
And moreover, Knox apps can’t be inhibited or disabled at all on stock ROM, and suppose Odin flashables in order to be inhibited and disabled, and i researched much for by myself but up to now no luck getting expected results
SamMobile firmware: On 20220314; TGY for Hong Kong; Android 11
Code:
Odin mode (High speed)
Product name: SM-A125F
Current binary: Samsung official
FRP lock: Off
OEM lock: Off (U)
KG status: Checking
MTK Secure Boot: Enable (0)
SEC ctrl status (1)
Warranty void: 0x1 (0x500)
RP SWREV: B2 NS2 K2 S2
Secure Download: Enable
CASS: 0x1
DID: 000ac3086b58
CARRIER_ID: TGY
Only official released binaries are allowed to be flashed on: vbmeta
Did you get a solution?
There are a couple of tools that can help you complete the kg status then write unofficial files.
hd_scania said:
My device is Samsung A125F, and when flashing an empty vbmeta by @edward0181 with both Heimdall and Odin (preparing to flash TWRP also by this guy), the Downloader doesn’t allow flashing unofficial bins on boot due to Knox-KG status of prenormal, and flashing stock packages doesn’t reset Knox-KG to normal
And moreover, Knox apps can’t be inhibited or disabled at all on stock ROM, and suppose Odin flashables in order to be inhibited and disabled, and i researched much for by myself but up to now no luck getting expected results
SamMobile firmware: On 20220314; TGY for Hong Kong; Android 11
Code:
Odin mode (High speed)
Product name: SM-A125F
Current binary: Samsung official
FRP lock: Off
OEM lock: Off (U)
KG status: Checking
MTK Secure Boot: Enable (0)
SEC ctrl status (1)
Warranty void: 0x1 (0x500)
RP SWREV: B2 NS2 K2 S2
Secure Download: Enable
CASS: 0x1
DID: 000ac3086b58
CARRIER_ID: TGY
Only official released binaries are allowed to be flashed on: vbmeta
Click to expand...
Click to collapse
Need to unlock bootloader first. In Download mode, does it have said option to unlock bootloader?